Snap On Roll Cart Tour: What’s used daily and kept handy for use
Vložit
- čas přidán 11. 09. 2024
- Here is what I keep in my roll cart: these are items that are used frequently and always an arms reach away. #snapon #toolboxtour #koontrucking
Thanks for watching ! I truly appreciate each view that I get on each and every video.
If you are interested in Koon Trucking or Diesel Medic shirts are stickers there should be a link to the teespring store where you can purchase these items.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime ! If you like my content be sure to hit that “Bell” and it will notify you when I have a new video come out.
Here are some of my favorite links to get some super cool items off Amazon.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
Irwin 34 pcs Bit Set (same as Matco MQC34C) for $47.99 vs $153.85
www.amazon.com...
Milwaukee 3/8” adapter to convert your impact into a 1/4” bit driver:
www.amazon.com...
Vampire Tools Kevlar Shears (these bad boys will cut, designed to cut Kevlar so you know they are tough, I love these things!) : www.amazon.com...
Vampire Tools 8” Extraction Pliers (these things are amazing):
www.amazon.com...
Vampire Tools Super Combo Scissors (these things will cut anything! I’ve cut a bunch of pennys in half with them and they stay sharp):
www.amazon.com...
Lang Tools Master Feeler Gauge Set (the most complete and best feeler Gauge Set I have found):
www.amazon.com...
Power Probe Master Combo Kit (this thing makes finding broken wires a breeze):
www.amazon.com...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light and it is very bright):
www.amazon.com...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com...
Streamlight Stylus Pro Rechargeable Flashlight (I carry this in my pocket daily):
www.amazon.com...
Coast A9R Rechargeable Penlight (this is an amazing light, wear it in my shirt pocket, the circular beam is awesome!):
www.amazon.com...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com...
If your tools are stained or really dirty then Citrol is your friend ! This stuff works magic on rubber grips, impact guns, plastic etc. :
www.amazon.com...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow me on Instagram: KoonTrucking
Check out www.vampiretools.com and use the Coupon Code: KOON15 for a 15% discount off your entire order plus get free shipping to anywhere in the Continental U.S.
Be watching for upcoming videos as we put these Vampire Tools to the test !
I was in the market for a tool cart so as to save time between jobs in the shop.(auto technician) two days after watching this video my snap-on guy shows up with this same cart. All of my tools are orange, so it couldn't have been better. The cart was "used" less than a month old. Purchased it for $1,500 and I couldn't be happier. Used your layout as a guide line for setti g the cart up. I gotta say it saves me so much time throughout the day, which is very valuable as a mechanic. Time is money. I appreciate your videos, they are no nonsense straight to the point. Keep up the great videos.
Clay, a suggestion to prevent your wire stripper handle covers from sliding is an old trick we use to use with motorcycle grips we used to use is pull them off and use some hairspray. The hairspray will allow to side the grips back on, but when it dries it holds the rubber tight, and you can replace them down the road, if ever needed without doing damage to the tool. Just as thought that might help you. Thanks for all the videos & reviews - I appreciate the honestly! To you, your family, team - Stay safe & healthy
Works on BMX grips too.
I like the set up in the roll cart , very nice.
That's clean for a mississippi boy. 👏
The charger to that Cornwell light is in your newer top box, on the right smaller drawer. Lol. Have a great week Clay!
Very nice tool cart. Very organized and clean tools. Thanks keep the videos coming 🪛🪛🔧🔧👍👍😘😘
Thank you my brother I’ve looked around your tool cart seems to be the best to get .God bless you my brother
Thanx Clay, really liled the video. Your rollcart is LOADED with awesome tools. Like that everything is so organized. 🤘
So I’m a total noob when it comes to fixing cars and crap. But 2 hours later I changed my oil 😂😂😂
It doesn’t matter if it took you 2 minutes, 2 hours, or 2 days. You’re learning and that’s what matters!
@@goinhot9133 Just because you take something to a dealer doesn't mean they'll do it right either. I've taken my car in to Mercedes on several occasions (for items under extended warranty) only to have them screw up the entire job so bad, I ended up doing it over myself. You can buy a lot of Snap-on tools at $165.00/hour labor rate.
Fulcrum $165/hour labor rate isn’t what the technician is making 😂😂😂 that would be awesome though, I’d be a rich man
Just pulled the trigger on one these carts, tan with metallic orange trim, stainless top and I’m so excited to get it as organized as yours clay. Love the channel keep on keepin on brother
Ohhhhh that’s gonna look good !
Clay love how you keep posting videos even though it’s not Friday. Thanks for your hard work.
I picked up a ct761 a couple weeks ago. Not a cheap tool. But I love it, I use it pretty much all day everyday. Used one from a coworker a couple times before buying one, highly impressed at what it’s capable on breaking loose, from under the hood, to brakes suspension even some things under a dash. Doesn’t have the most torque in the world but for all around use, works fantastic and I’d recommend it to anyone in the automotive world.
Everything is organized that's what I need to be better at. I spend a lot of time at work organizing the shop but it never get completed always a on going project. The Roll Cart is super nice and clean!
I use to would only buy snap-on ratchets, then I got a Matco, then another, then another. I love them
A little quick video with a lot of useful ideas. Thanks Clay. Enjoyed it.
I'm buying this roll cart it's 40" wide and rolls good under a car on a lift without a top bumping the undercarriage of the car.
A coworker has one and I can’t believe how much stuff it will hold.
I have just about all those tools, those Matco scrapers are the shit. The guys at work were not believers until they saw them in action
They are awesome. I don’t see how they work like they do but they work !
You can tell a pro by how his tools are organized in what condition they are in. Granite things happen when they get used but if they’re not dirty and they got crap all over him you can tell that that’s how he does his work. I worked in the industrial side of things back when snap on had an industrial program and Stanley used to come around with Proto so I have mostly Snap-on Proto and some Mac.
Thanks for the tour Clay.
I use that same orange Matco ratchet everyday. It’s very comfortable to use.
Nice cart! Toss them trays that the tools come off the truck in into the garbage you’d double your space lol
I have run completely out of room in my big box so ordered this exact box 2 months ago in combat green. Been trying to make plans on how to organize it with my regular tools and I really appreciate this one. Thanks for showing
Do a review.
How long did it take to get it? I just ordered the same exact combat green one but with the stainless top
Love the box color and box 📦
I'm actually about to purchase a Matco JSC773 cart as my "main" box for the next... Hopefully couple years to replace my 4 drawer Husky cart, so I like seeing you guys with a well stocked roll cart. Yet another awesome video Mr. Koon keep up the good content👍
Thanks for watching
You should do a tour of your shop for a video that would be pretty cool
I have a blue point slide top and I didn’t care for it, but seeing the Snap-On one, definitely like the drawers in the slide top! I was like wow, never saw that before what a great idea. Thanks for the tour!!
And you'll be dumb enough to buy it just because it's snap on
Good cart with the slide tops are great! And true those oem lights awesome. Looks like you got her all setup nice!
I gave my snap on roll cart my orange one away to a kid in high school I wish I never did watching this is going to make me go back to the snap on truck and get another one he had a nice black one on there she didn’t got it
I love that cart. The slide top is what’s up ! Never again a flip top for me !
I like how the top slides great idea I wish mine did
loved it, straight to the point. best review so far
You’ve got a lot of money into that roll cart. It’s great quality, nice colour, and it’s really mobile. Looks really good.
Nice tour I like the box
Great tool cart tour...love your tool and toolbox collection.
I know you got rid of this already but I JUST ordered mine. On back order so I’m sure it’ll be a minute but I’m super excited for it. Great to see how you organized yours
Ha, complete, organized and clean!
Thanks clay. I love the show. as all ways. From the 🇬🇧 👍
We’re still using mostly standard in our shop. Metric is only for our Detroit’s and Eaton transmissions. Sucks buying both but gotta have it lol. Great review sir.
Nice to see "inside" Clay
Good video clay nice box and tools y'all have a good one and stay safe 👍
Nice I got that same KRSC430 cart but in storm gray. Very well setup for everyday use.
The storm gray is nice too. They are really good carts. I love mine
nice video!! thanks for showing us!!
Nice Set of Tools...Over the year's I've only used about 50%..of those tools on a regular basis...
I quit buying complete sets on some items.. As most Techs Know...you can open your box
and see which tools are used the most...I've been Wrenching for 30+yrs now...I Hate clutter
And unused stuff in the way...I Keep it Simple and Productive.
Get you a good set of wood chisels. Best gasket scrapers I have ever had.
Gotta love the slide top carts!
Awesome box and tool's brother
I have the crp123 as well. And I love it for reading and clearing codes at home I just got the launch x431 pro to use at work it is bidirectional. That is awesome too. It also does medium duty trucks.
In the words of J Young you need two CT761 impact guns lol . Awesome videos Koon trucking. 👍👍👍
Best roll cart I have seen, organized, nice tools, everything has its place, obviously a pro
I like your tool cart; wish I had one in the extreme green!
No shit. My dream cart with the exact setup I'd love to have.
Awesome setup man. Love it and the channel. Keep up the awesome content 👍
Your viewer from North Pole, Alaska.
Thanks for watching. I appreciate it !
I know this was a year ago but if you like that but holder check out the Milwaukee circle bit holder I love mine it’s like a hockey puck size that twist it’s perfect to not lose any and organized perfectly.
So those are Wally’s tools too right? Hahahahaha very nice cart extremely organized and clean definitely shows the level of professionalism you have!
Thank you. They cost a lot of money and honestly i enjoy opening my drawer and seeing nice clean shiny tools.
Koon Trucking same here! A clean tool is a happy tool lol
Nice review and enjoyed your service cart needs.
The Bosch HD Code Reader use to be my go to before my JPRO purchase last year. I could trick Re-Gen those dastardly Peterbilts with that fine piece of equipment.Still keep it on the truck though. Thanks for another great video.
Shoot me an email koontrucking101@gmail.com
Very nice tools sir.
Thanks for the free tour. Hey Clay, it looks like you need a plier rack!😁
Haha been trying to get one
First nice setup
If you prefer soldering you gotta try out the Milwaukee m12 soldering iron. It's a beast and you wont regret it!
hey man get the platinum ratcheting wrench set (double box end) (plt99650) it is amazing! your snapon guy has it, or can order it! best money i've ever spent!
Neat Clay respect
Thought i was the only one who liked whip hoses
Needs a sock drawer lol 👍
Nice setup clay
Where's the stash food drawer lol.
Nice tool cart
wow!
Nice cart tour! Hey! Just got your stickers! Very nice! Just posted them up on my ig page! 👍👍
Nice cart!
Try the new snap on wire strippers they go straight on the wire great for tight spaces
That electric orange is about as fine as frog hair!!! The magnetic matco tray is nice too.
Cool thank you
Do y’all not have a Mac truck
Long neck 3/8" cordless ratchet is one good tool and can be used as a semi breaker bar
But connectors aren't for automotive wiring the vibration will cause them to fail but some people still use them
Love the video I've mentioned it before on this channel but if you love that 14 volt long ratchet you really need to check out the new aircat long ratchets they have saved me alot of time and aggravation
Nice Cart. Thanks for sharing 👍☕️
Dude I want to fix my roll cart like yours can you do an update on it
Do a video on how much you owe the tool trucks
I bet he owes them nothing. I think this is his shop.
Prolink ultra next time you get time try to do a video on there really would like to use that on international trucks for region
They work good. I’ve done a video on it before. Can’t remember which one it was but i showed how it works
I need a wally and bill roll cart tour
Mr. Clay may I ask why the Matco ratchet is one of your likes.
Thanks for the upload I almost thought when I got the notification it was Friday :)
I pretty much only use snap on ratchets. We had issues (to say the least) with our old Matco guy not wanting to warranty stuff. I bought the matco ratchet to support Michael and have used it and I have to admit i like it. I still prefer the grip on the snap on but the matco ratchet is nice.
my67faststang1 was gonna ask the same question I’m thinking about getting a 3/8 with a green handle lol
Mr. Clay thanks for your thoughts on that and your honest opinion. I am the same way all Snap-on ratchets but I bought a Matco for the same reason to support the new dealer in our area and so far ratchet has held up fine. Thanks again for taking the time to make and upload videos, I own a diesel shop as well and the days can be pretty hectic because you know if those trucks ain't running down the road they ain't making money.
I bought one and like Mr. Clay stated for some reason the handle is a lot harder to clean then the Snap-on's that I own.
Hi just a quick question is your tool cart a 33inch or 40inch wide version?
And thanks for another great video I love ya Snap-on Fridays!!
Keep up the great work!
Thanks Lee
matco part#ezsold too hold wires when soldering..
Knipex could charge 100 bucks for the cobras and they would still sell like hotcakes.
No wonder Wally keeps borrowing your tools.that cart is fully loaded
As always, another good video! This will be my go to cart. Before I order one, can you pls let me know how tall it is? and how wide? I guess this one doesn't have the openings for pry bars, breaker bars or screwdrivers on the top drawer? Thanks in advance....
It’s 40” wide and about 20” overall deep 6 drawer. No it does not have the spaces for prybars in the top.
Sweet box. I could just open a couple of them drawers and stare all day. Would you recommend the Knipex PWZ over the Snap on/Bahco ones?
Both are great honestly.
Very well organized. Where do the pry bars go?
I have the short ones in the hammer drawer and one long one in the bottom but the ones that won’t fit in the roll cart i keep in my toolbox.
Why do you keep short hoses on ur air impacts? Instead of just an air fitting on the bottom? Never really seen that before.
1st comment !!!!
Awesome! Thanks for subscribing and clicking that bell notification !! I appreciate you watching !
Love these videos !!!
Have you done a video on that launch scan tool by chance?
Boss can you please I'm New as diesel tech can you give us what exactly what kind of tools I need to work tank you nice car tool
Do you use the snap on super thin socket and wrench set? Ive wanted one but am unsure of it. Good video. I just picked me up them new snap on flat hose pick set and 2 more rathets. I wont use them i just love snap on ratchets lol
Hello mr clay I had a question. I’m a big snap on fan as you are also. I have every snap on ratchet. But after your video I seen them Matco black locking flex head ratchet. How do u like that ratchet. I been wanting one since I seen that video.
They are awesome. Very smooth
Howdy Clay, how many ounces are those three hammers?
You need a me big box instead of 3 different box's
@ koon trucking what do you think of the gearwrench pinless swivels? The x-core i beleive there called
They are really good I have beat the hell out of my 1/2” ones and they still hanging in there. I’ve posted pics of them on my Instagram page you can see how much abuse they have taken.
CZcams is getting pathetic every time I come on your channel I have to re subscribe hopefully it’s counting for more subscribers every time for you lol
Haha that sucks ! But I’m glad you keep re-subscribing !
👍🏼👍🏼
What’s the part number on the slack adjuster long handle tool 🤔