2015 - 2019 Corvette Z06 Heat Exchanger Replacment
Vložit
- čas přidán 13. 08. 2021
- Uh oh, your C7Z06 needs a new heat exchanger… this video will walk you through removing and installing a new heat exchanger. Questions/ Comments? Post em’ below, don’t forget to like/ subscribe form more content and HUGE PROPS to @Performance_Oriented for having the courage to be the first film this arduous task.
Want the same heat exchanger?
privatelabelmfg.com/products/...
THANK YOU FOR WATCHING AND HAPPY WRENCHING - Auta a dopravní prostředky
Can’t wait to purchase my 16” corvette Z06
THANKS, THIS VIDEO HELPED ME ALOT.
great video bro
It might take longer doing it this way but it’s way better than trying to cram the hx behind the radiator with the shroud in the car. Good video 👍🏻
😂😂😂 fuckerino. loved the vid, very informative and funny.
Your funny haha. Those Falken rt660 tires? I'm running 18x12.5 rear 18x11 front and 315 30 18 square on 2019 c7 z06 apex new vs5rs forged wheels ♥️
Damn zo6 and Ferrari but got a harbor freight jack
Awesome work, 👌 maybe another video doing the bleeding process to make sure there arent any air pockets in the system, also how much did your AITs lower? Thanks
IIRC AITs are measured at the MAF- which is PRE-supercharger. What this does is drop the temp of the fluid which attempts to drop post boost temps. And yes, it works like a champ, combined with an expansion tank, you’ll never drop performance with a stock car.
@@CtRacerX what’s your IAT3 / MAT after this mod
@@iAbdosh you need HPTuners to measure IATs; however, in this case, at WOT on a 91* day, I was getting within 35 degrees of ambient AFTER 5 back to back 0-100-0 runs! I also jumped the intercooler pump to run continuously, that definitely helps keep the IATs down.
@@CtRacerX the MAT was within 35 degrees of ambient?? Sheesh I’m getting 150-170 degree temps after a 60-150 pull with the stock junk
@@iAbdosh like I said, it is totally worth it!!!
Oh how do jump wire to run hx pump full time?
If I recall correctly, I also referred to a specific fuse that you jump and that’ll make the supercharger coolant pump run even with the engine off, so you can purge the air out of the heat exchanger.
How is the PLM heat exchanger doing you with ur Temps?
The heat exchanger did very well in that car, IAT’s were down roughly 3 to 6%.
So basically zero reason to pull out the intake and etc
I'm so over my 2016 Z06 you can't trust the car to even go to the car wash constant problems with radiator fan running full blast when the car is off I've had in to dealerships I'm at the point to tell my daughter if she wants it get the piece of shit out of my garage or I'm going to run it over the scales at junkyard
Sheesh !... 🤦🏾♂️
I feel you there, my friend! Chevrolet, in theory, makes a decent product as long as you are not wholly reliant upon it. With that said the fan that seems to continuously blow is the result of a blown hundred amp fuse if I remember correctly. I made a video about it in short. If you blow this fuse, the fan will run and the fuse block that you have to replace it with requires an entire change. You can’t just replace the 100 amp sectioncheck out my videos. Let me know if you find that video and are able to sort out the issue. If not hit me back I’ll see what I can do to help you out.