ECHO CS620PW and ECHO 7310P CHAINSAWS! AWESOMENESS!
Vložit
- čas přidán 21. 08. 2024
- ECHO CS620PW and the ECHO CS7310P chainsaws are awesome and today we get to test them out on a few cuts to see if they can do the job! They are VERY well made saws and come with a 5 years warranty! The other companies are not even close and the ECHO saw are WAY cheaper!!
Just got my 620 ported. It is a total beast and blows through my East Coast hardwoods. Love the simplicity of these saws!
nice!
I've had the CS-590 for about 4 years and it's never skipped a beat. Starts easily, cuts beautifully... couldn't be happier!
Awesome!!!
Finally a real chainsaw on the channel! LOL Love the 620/590's.
More to come! Yup, it is a good one!
Very impressive saws. The one cutting noodles was really nice at cleaning the noodles out without plugging up. Hard to beat a 5-year warranty. Thanks for the comparison.
Yup, great saws!
Japan definitely makes good stuff.
Yes they do!
They make Toyota
I ran a 7310 pw in my wildland fire S212 sawyer class and then on the fire ground. Perfered it over the sthil 461 that is fairly standard issue. 7310 is a beast of a saw
Yup, it is a good one!
The Echo saws remind me of the old Homelite saws. Simplicity is a lot! I went to Stihl saws from Homelite when Homelite went to overseas made junk. I have several Stihl and now 2 Husqvarna saws. The 572XP is hard to beat, in my humble opinion. I have not ran any of the newer Echo saws, but I am looking for the opportunity to try one out.
Yup, all good points!
I have a CS-620 P and a CS-600 P that I purchased in 2010 great saws . The 620 has a hotter coil advanced timing and a bigger carburetor, it handles a 28 in bar as well as the 24 in bar. I like it a lot.
Nice stuff!
Gavin’s new saw is what I was thinking. He is definitely earning his keep with all the work he does with Adam and Bert. Learning from hard and dedicated workers who want to pass on knowledge. Can not wait to see how the 620 wakes up Chris and not a better crew to give a honest review of how a saw works and does. No fluff, just straight facts. Good Night Irene. 👍🏻
Thanks MAN!
Just picked up a used Echo and now it's my favorite saw.
They are great saws!
I've got the 7310 with a 28 inch bar. I knew I was going to run it pretty hard chainsaw milling....so, I like the 5 yr warranty. Very happy with it.
Very nice!
I’ve got a 620PW wearing a 24” bar and I absolutely love it. It will rip through anything I throw at it. I’ve got a Granburg mill for the 24” bar and use an Oregon ripchain when milling. Swapped my crosscut chain to the 72LPX and it’ll just dig in hard when bucking and chew into the wood with tons of torque. The low end grunt of this saw in the cut just makes an initimitable sound. She’s a total keeper!
Very nice!
I’ve got a 590 and a 620 love them both
Nice saws!
Glad to see you wearing your safety gear!!! Echo comparison was outstanding and thanks for your fair tests👍👍👍
yup, always safe...thanks!
They’re $1000 in Canada, the 590 is 639+ tax here I got mine lightly used and saved a lot of money. Also found a new in box 501P for half price, they’re $950 with tax
NICE!!
Picked up a Husqvarna 585xp last week. Picked it up on the last day of the Husqvarna sale. Only put a tank of gas through it so far and is a big difference from the 562xp. Bucked almost twice as much wood with the 585 over the 562 with a tank of gas.
Did you also purchase either the Husky fuel or oil to get the extended warranty?
Yup bigger saws make bigger wood piles faster!
Nice! I never gave them too much thought - thanks for the demo Chris!
Thanks for watching!
I loved my 620p so much I bought a second one. 1 has a 24” bar and one has a 27”. I prefer the 24”. I find that I hit the ground way more with the big bar.
Yup, long bars like the dirt.
I have both and I love them. 620 is probably my favorite saw
Cool...nice saws!
Got my 620 about a week ago I’ve ran about 3 tanks through it I love it great saw for the money
Nice! Yes for the $$ it is a great buy!
Nice chain saws Chris love it ( Ty Ron
Thanks!
Dang that CS620PW is a nice saw. Price seems right too. I might have to look into this Echo when I'm ready for a new saw.
Yes you should!
Thank for doing a video on this model, Echo's are good saws. I have 3-620's they just work without problems. And pre-emission Non-strato Non-electronic
Thank you for watching!!!
You’re welcome, thank you Chris.
You taught me more about firewood than any channel in the 5yrs watching. If it wasn’t for you, I wouldn’t be where I’m at or even doing firewood as a side gig. Appreciate you
Good morning Chris!!😀😀
Pretty nice!!😀😀👍👍
Yup, nice saw!
also these echos have a dramatic increase in performance after about ten tanks of gas or so , yes it happens with other saws but you can almost feel it the moment it happens just phenomenal performing saws that last
That is great to hear! Thanks!
I've had an echo cs620pw for 3 years and I love it. I've cut 300 ricks with it and the only thing that has ever happened is the nuts that hold the bar on will occasionally vibrate loose. My only complaint about the full wrap is I can't cut stumps flush with the ground. It's the best saw I've ever had.
Yup, good to hear! Nice saws!
Echo has came a long way to improve quality of their saws!! Nice video!! Stay Hydrated and Have a Safe Day
Thanks, you too!
I have 3 of the shindawa 600sx saws which are red echos. I have had excellent luck with mine. The warranty is really impressive too.
Nice!!! Good to hear!
Awesome vid today Chris! 🔥💯👍. Great review! Looking forward to try these out myself at some point ! See you soon! Andrew from NB :)
Yup, great saws!
You need to tune the 7310 leaner. It’s running really rich and slow right now. Just needs a flat head screwdriver to adjust.
Yup, it is new and after a few tanks we will tune it up!
The Echo 620P will run with, if not better than, a stock 70cc saw once ported. The big differences between the Echo 620P and 590 are the piston, cylinder, carb, and coil. Otherwise there is nothing different as the 620P parts will fit the 590. If someone burns up their 590, can easily replace those parts with 620P parts.
Thanks for the info!
🤘 definitely something to consider!
Thanks for watching!
G’morning Chris. Awesome saws. My pal has a 620 that’s ported. Screamer to say the least. Great showing of saws !! 7310 is a very recognizable sound. Thanks !
GoodNightIrene
Yup, good stuff!
Looks like a good saw! Cant beat the warranty👍🏻👍🏻GNI
Yup, nice saw!
Fine program Chris. Right about the advantage of pro saws ( and the space ship helmet !😁 ). Good marketing for Echo. For those of us aging, smaller 50cc saws with 16" -20" bars do the job for cutting here for the 6-8 cords/year off the woodlot for heating needs. My Stihl Ms261 plus the smaller limbing and climbing saws ( Husky & Stihl )have worked well as I run into senescence 😢. Stay cool, temps in the 80's-90's are hot for Maine. Try chaps with shorts ( or nude ).
Yup, thanks so much for watching!
Now thats a very good review! Will be good to see you working a pile with it Chris. Also that 562 Husky comparison will be good. Got to say your prices in the USA are amazing. My 576 cost $2000+. Thanks for the vid. Cheers from HB NZ
Wow that is nuts!
That is pretty similar. I think that is around $1200 in USD
Unless prices have changed the Makita/Dolmar saws in that range are pretty good deals really. I have a 6421 don't think that model is made anymore but I am sure they make basically the same saw with a new model number but its 64cc or 65cc and I think those are around $700 new. Mine was $250. I got it from Home Depot. It was from their tool rentals.
interesting!
Nice video/review Chris. I’ll be following for more of the saws “test drive”. GNI
Thanks for watching!
Hey Chris , I love my 620P . It is bone stock except for the o ring kit for the air filter . I would like to get it ported but it runs so good stock . 👍🏻🇺🇸
Yup, I am told by many people that that makes a big difference!
Holy cow you’re running something other than husqvarna?! 😂😂 keep up the awesome videos sir we enjoy them every day?
Yup! I have lots of other videos with Stihl saws too.
Nice saw but personally just not a fan of the 60cc class saws. If I want to get things done it is a 70cc and up every time. There are several 50cc saws that will hang right in there with most stock 60cc saws,and they are much lighter. I have owned a few different 60cc and they are always just back up saws and get used the very least. The Willow is like Pine...and will make any saw look like a winner!
For the right person a one saw tweener saw in 60cc might make sense, I still prefer 20cc jumps 50-70-90cc 70cc being an all around best pick. maybe in another 5-10yrs I might change my mind as I already avoid the 120cc saws unless absolutely needed.
Yup, you are right about all that! The 60cc are nice saws for quick jobs or end of day tired old man jobs!
Yup, good points!
@iffykidmn8170 If there were more weight savings in a 60cc maybe...But most are just slightly less weight than a 70cc and take so much longer to get the job done!
I have been wanting to get a 7310, I have a 590 Timberwolf which is the same size of the 620. I love Echo saws but my 590 has been disappointing. I have a 501-P and it is great but I love the extra power. Yes, the professional saws are worth the extra money.
Right on!
Chris...The more you run an Echo they better they seem. Echo-far less expensive to buy, easier and cheaper to maintain, adjustable carburetor, screw-down oil and gas caps, translucent fuel tank, great separation of fines so air filter stays clean, etc. Only negative is they come pig-rich from the factory and need to be tuned after three-four tanks. Easy to do by pulling the high and low limiter caps with a drywall screw, adjust needle valves, and put the limiters back in place. Or dealer should do it for free!
Yup, they make good stuff! Thanks for the info!
When I bought my 592xp I got a 5 year warranty with it, had to buy a gallon of there premixed fuel to get it though
Yup, both Stihl and Husqvarna have those plans where they get you hooked on their consumables.
Echo 620 24 inch pro bar is also 81 drive links so it it proprietary to the echo mounts compared to the 7310 that uses husqvarna mounts
Timberwolf 24 inch bar is 84 drive links though if you’d prefer to use the same chain on all of them
Yup, that is not a good thing for the line..in my opinion!
Interesting!
Nice saws. Like to see how they cut when you cut the firewood size.
Yup, me too!
If it were yours I’d recommend an oring kit or an upgraded filter from red beard saws
Thanks for the info!
Ok. You have influenced my decision. I've found that I like 70cc saws the most. 7310 uses a old school engine design, has a old school carburetor. Stihl 400 is going away. I'm snagging up a 7310. I like meatloaf, don't wanna eat it everyday. Variety is a good thing.
Good choice!
Only allowed one saw for the rest of your life and on a budget this one might fit the bill perfectly.
Yup, it would be a good one!
I like it a lot as Lloyd would say 😊
Yes he would!
I LOVE YOU CHRIS!
Thanks!!!
I have a CS 620 p and the cs7310p, I also have the ms400 c
Yup, nice saws...all of them.
Of all the reasons why a person would want a full handle rap, probably the most unlikely thing is, a left handed person can sometimes prefer them.
The other not so obvious thing is, it provides a little more protection from being a target from anything hitting it or dropping it.
.
Probably the rarest saws out there are saws that are heated carbs with full raps.
They exist, but are very few.
Yup, good stuff...thanks!
Full wrap is nice for felling. Other than that I don't know I am not left handed either I could see if you were a lefty but a full wrap is really nice for a felling saw. Kinda makes more sense for 70cc or bigger saws. Not sure I ever really seen many that were smaller than 70cc with a full wrap
When they say takes a while for them to wake up thats true. My little 400 after 3 years of daily use will cut that willow just as fast as that 620. But i do have a 620. Just wait tell you have put about 30 gallons of fuel threw that thing. She will scream. Milling red cedar it will cut a 8 foot 10 inch log into lumber just about as fast as a bandsaw
Yup, true...most saw get better once they are broke in!
It comes with dual felling dogs👍
Yup!
I’ve heard the 590/620’s ported are nasty. One thing about echo is they take 5-10 tanks to fully break in. It’s noticeable and on all their equipment
Yup, I have heard that too...tight tolerances.
I’m excited to see what you think of the 620 after you use it for a while and it breaks in.
I personally have a couple of them and I really like them. I’ve been thinking about getting the 7310 just haven’t pulled the trigger on it yet.
The 7310 is a great saw!
Just had my 7310 ported by Dyno-Joe. Boy, did it wake up.
5 Yr warranty is available on Husqvarna saws if purchased with the 3 quarts of pre-mix fuel at time of purchase.😉
Yup, good catch!
Well crap,now you got me wanting to try a echo, I need a quit buying saws Chris,lol or do I?? Naaa
More is the right number of saws!
Good morning everyone
Hello Stanley!!
For $600, its a steal. Not a Stihl, nor a steel. Although you can still use it like a. You got my drift. Lol
Yup! Great saw!
Don’t see to many echoes in Australia, what’s the comparison between them and husky and sthil
Todays video shows them!
Concerning the Echo "Echo" is your 2 cents about it real copper or zinc Professor?
I do like it a lot!
Good Morning Woodhounds!
Morning!
👍👍👍
Thanks!
CHRIS, HAVE YOU HEARD ANYTHING FROM SCHEIB? NO UPLOADS......IS HE OK? THANKS!
Probably on training for the Guards???
@@InTheWoodyard ok cool thanks
3 good saws!! Goodstuff, GNI
Thanks!
Just looked up the CS620P. Not the full wrap. Amazon and HD are quoting $459. Other dealers advertising the X series at $629-649. Do you know if there is a difference?
At home depot's website the saw you are seeing advertised for $459 is the 590 timberwolf that's the homeowner version. The 620 PW at home depot's website is $669
I think you are looking at two different saws.???
yup!!!
Now I’m gonna go buy a new saw lol
More saws is the RIGHT number!!!
Can you use the same gas for the echo and the huskavarna saws
yes...it's all the same mix.
I really really wish Echo would make another 90-95 cc saw, I'd buy one tomorrow
They do make a real big saw like 120cc??? but it is not sold in the USA that I know of.
Do ever wish you would have gotten that helmet six years ago ?
Yes, if I had I might be able to hear better!
Morning Chris where are all the wood cats not seen them in woodyard for ages 😸
In the barn!
Not venturing out much miss seeing them play about on the logs, but I also like watching your videos even though I don't cut or use wood, my ex use to cut wood for fire place and used to love the smell of freshly cut wood
Use it like you stole it.
Or like Kenny would!
Yeah, you own thousands of dollars in Autotune/M-tronic saws that'll be worthless if you try to cut after a nuclear/EMP attack. Gotta think about the 0.001% chance these manual carbs are better, eh.
Not worried at all.