Best video on CZcams. Thanks for the straight forward approach without any nonsense. My project went well except the one and a hours trying to get the top radiator hose off. Merry Christmas.
Great video helpful just changed my water pump on my chevy express .the hardest part for me was removing the baked on paper gaskets from previous water pump.
Agree, this video is straight to the point! You did a great job with camera angles and video editing, plus the work!. Changed my Express 2500 pump in 3 hours and only had to buy the fan clutch tool. 👍👍👍👍👍
This is the way videos should be done without all the bullshit talking! Just keep doing videos like this and you’ll have 1 million subscribers! Thank you. I will be putting in a water pump myself looks easy.
I’ll be doing mine pretty soon, my van started to leaking coolant, This video encouraged me to do it. Thanks man, excellent video, just wonder how to bleed the system? That’s the only thing I didn’t understand; how to make sure the system is bleed. Thanks a lot !
Hi Antonio once you fill the system with coolant turn the vehicle on put the heat on high.. let run until it is at operating temperature... When the vehicle is at operating temperature and you have the heat blowing hot through the vents that's letting you know the system is bled.. add more coolant if needed ..hope this helps 🍀🤘
@@kevintieu5198 yes sir once your done replacing the water pump or whatever part that is leaking ..and make sure all clamps are tighten down then fill the cooling system and bleed the system
@motivquotez iirc like $800. but I'm up here in Fairbanks, Alaska so it might be higher cost for me. I had to take it back to them for warranty work and they claimed they found something wrong with the water pump so they warrantied the whole thing out. then at the same time they did put in an Arctic grade power steering hose cause it's common for those to go out up here in the extreme cold. 🥶
Awesome video. Wish all how to videos were like this. Great job
Thank you so much!!
Best video on CZcams. Thanks for the straight forward approach without any nonsense. My project went well except the one and a hours trying to get the top radiator hose off. Merry Christmas.
Merry Christmas to you too 🤘
Very good video! Thank you!
Great video helpful just changed my water pump on my chevy express .the hardest part for me was removing the baked on paper gaskets from previous water pump.
Agree, this video is straight to the point! You did a great job with camera angles and video editing, plus the work!.
Changed my Express 2500 pump in 3 hours and only had to buy the fan clutch tool.
👍👍👍👍👍
Thank you so much 🙏
Clean job.!! imma do mine also. Great pictures and description . straight to the point.
Thank you so much!! 🙏
This is a great video. I followed it step-by-step, and it was perfect. Great job.
Thank you so much 🙏
Yo bro this is the best get the job fucking done video please make all of them like this! This is actually teaching a lot !
Thank you so much!!! 🍀🤘
Love this video
This is the way videos should be done without all the bullshit talking! Just keep doing videos like this and you’ll have 1 million subscribers! Thank you. I will be putting in a water pump myself looks easy.
Thank you So much
Dangg best video I ever seen no bull shit talking strait to action
Thank you so much!!!! 🤘
Hey what year model and engine was this?
¡Gracias!
Thank you, Alexander, so much for the support!!!! 🙏 🙂
I’ll be doing mine pretty soon, my van started to leaking coolant,
This video encouraged me to do it.
Thanks man, excellent video, just wonder how to bleed the system?
That’s the only thing I didn’t understand; how to make sure the system is bleed.
Thanks a lot !
Hi Antonio once you fill the system with coolant turn the vehicle on put the heat on high.. let run until it is at operating temperature... When the vehicle is at operating temperature and you have the heat blowing hot through the vents that's letting you know the system is bled.. add more coolant if needed ..hope this helps 🍀🤘
@@luckysdiygarage Do you bleed the system once all the parts have been replaced and hoses clamped? I have a 2000 Chevy Express 3500
@@kevintieu5198 yes sir once your done replacing the water pump or whatever part that is leaking ..and make sure all clamps are tighten down then fill the cooling system and bleed the system
Thank you!@@luckysdiygarage
I noticed a lot of water poured out when you removed the old water pump. How do you replace that water after installing the new water pump?
after removing the old water pump and installing the new water pump. I refill the cooling system with fresh new coolant
And dispose of the old coolant
Una pregunta? Que año es el van ???
What are the torque specs for this job
How long did this job take you?
With replacing the water pump and bleed the system about an hour and 20 min
@@luckysdiygarage Thanks! So I should plan for 4-5 hours to do it myself. What are some things that could go wrong that I should plan for?
ooga, booga...me point at stuff.
just took mine to a shop and have them do it. Lol
how much did they charge you
@motivquotez iirc like $800. but I'm up here in Fairbanks, Alaska so it might be higher cost for me. I had to take it back to them for warranty work and they claimed they found something wrong with the water pump so they warrantied the whole thing out. then at the same time they did put in an Arctic grade power steering hose cause it's common for those to go out up here in the extreme cold. 🥶
Awesome
Thank you so much!!😀🤘
Fan clutch sucked without the tool
Haha tell me about it!! 😄 but a 36mm wrench and hammer can get the job done