Chevy Equinox Traction Control Light - Chevy Equinox Service Stabilitrac P0405 C0561 P1779
Vložit
- čas přidán 14. 12. 2015
- Do you have a Chevy Equinox or Pontiac Torrent with the 3.4 L engine and have an illuminated check engine light and traction control light, a service stabilitrac message, and/or stored codes P0404, P0405, P1779 and or C0561? You likely have a faulty EGR valve. Watch this helpful video for tips on diagnosing and repairing this issue.
- Auta a dopravní prostředky
My Daughters 2007 Equinox was having the same problem, I was getting the service Stabilitrac, P0404 & P0405. Two weeks ago I cleaned the EGR valve because the plunger was stuck but all codes came back. Replaced the EGR valve and cleared the codes & all is good. Thanks and much appreciated.
Thank you very much for this video---had codes P0404, P0405, P0115 and P1779 plus the service stabilitrac and traction control warning lights. One shop said they needed to go into the transmission and replace a few parts-cost: $2400. I replaced the EGR myself with ease with the help of your step by step video...result: problem RESOLVED and FIXED! ALL codes and warning lights cleared and passed state inspection. Cost: $80 part, zero labor expense!
Thank you for a video that is short, sweet and to the point! This has helped me tremendously!
Many thanks for the video!
I REALLY appreciate that you give a solid view of the part numbers for the components one needs.
Thanks again :)
My pleasure!
Had a 2005 Equinox with a 3.4 liter engine and AWD. Best car I ever owned. Gave it to the granddaughter and bough a 2014 Equinox with 3.4 liter engine and AWD. Thanks for sharing the information! You have a great channel.
+Rick Anderson Solid engine and great choice. Thanks for stopping in!
Great video. I have to replace mine on my 09 Torrent about every 2 years. Very common problem. Thankfully I went to Oriellies and have a lifetime part warranty.
Every 2 years? Thanks for the info.
thanks this video help me i hav a 2007 equinox with service traction control service stabilitrak and check engine light code p0404 and p0403 i changed the egr valve as the car doctor said clear the code and the problem was fixed.Thanks again car doctor.
Excellent! Thanks for the follow up. Always love a success story.
i have this problem on my 2009 pontiac torrent. i replaced my egr valve a couple of months ago and come to find out the new one was bad and didnt start showing up until about two weeks ago. thank you for this video. it saved me i dont know how much because i was able to do it all myself and my problems were exactly what you described (no shift lag or hard shifting, just the lights on my dash) so it was easily diagnosed and now its all fixed.
Awesome!
Thanks, I've been stalling on replacing my EGR for a couple of months even though ODM II said there was EGR system problem after I took into to a garage to change rear plugs - short arms - garage wrote on WO had a cracked ERG tube. Couldn't find one on single tube 07 Equinox, or soot on tube but outside tube heat shield was sooty. Also had "service Stability Trak" come on and off for 5 -7 years - ignored it. Then soon after the plug change had "service traction control" come on and alternate with the "Stability Trak " service warning - engine (EGR) fault light always on ... so decided after getting three warning lights time to get serious as they light the dashboard up too much and couldn't see outside temp or Odometer without cycling messages each time I started car. (engine and the 2 messages service lights). Checked the web to see if wasting money - found the save money item about a loose hose from filter to back of valve cover but not a problem - in place. Found a few but came across the three alert signs above you mentioned. Replaced EGR valve and cancelled codes ... so far so good ... there not back. Only thing I noted was the bolts holding the original EGR valve body to bolts to engine were a bit slack for my liking - maybe source of soot on outside of heat shield at end nearest valve body connection ?
thank you sir so much for all your knowledge and videos to help us all. God Bless you.
Any time you have to take oil cap off to do something other than adding oil , cover opening to keep from dropping ANY THING in there, Have a good day!!
Good stuff! Thanks for sharing. I own one of these Equinox vehicles, if I come across this problem I'll be sure to refer back to this video.
+Guy Ko This one has just under 100K miles. Thanks for visiting.
Thanks this exactly what I needed for my 2008 Equinox
Thanks for taking the time to do the video.
Excelente consejo, la mía es una Torrent 2008 y tiene esa falla. Ahora ya se como solucionarlo. Mil gracias
Dude your awesome had the same issue sprayed my valve out with throttle body cleaner and kept it pushing thanks
Update* this happened again about 2 days ago. This time instead of cleaning it again I just went and bought a new one. I think there are just some spots up in that valve that are hard to get all the carbon out. Thanks again for your help.
Thanks! Had an EGR valve code. Replaced it cleared it check engine light off, and service stabilitrak & traction control lights are now off. I've already had one wheel sensor fail a couple of yrs ago so I thought another one was bad... Nope.
Thank you, I have this problem, now I know how to fix it. 👍
Thank you. This is exactly what I needed to know.
Thank you for the info Car Doctor... I will surely give it a try.
Good luck. Let us know how it works.
Thank you Bro. you are the real mechanic.
Thanks!
Thank you for posting!
Great video thanks keep up the great work man 👍👍
GREAT video and information!!!!!
Thanks for the lesson doc!
+wyattoneable Very studious of you to stop by.
thanks bill for this video on egr repair.
Thanks!
Nice work Tim and good to see that it was easy to get to the EGR valve. Keep up the good work...
+stuzman52 thank you sir!
Wow...I have a 2007 chevy equinox...I just scrape off some carbon inside the egr valve and used WD-40 being careful not to get electrical parts wet...traction light went off and so far didn't go back on...eventually may be a good idea to install a brand new gm egr valve...Thank you car doctor.
That's great! Glad you saved some bucks. I like to run the engine for a short time without the valve in also to blow the carbon out too. Take care!
I had the same faults on my 08 equinox 3.4L six weeks ago. Removed EGR valve sprayed the heck out of it with almost a whole spray can of carburetor cleaner, 3 times in 1/2 hr period. Waited over night and sprayed again, waited 2 hrs for it dry and installed it again. Has been running perfectly fine for the six weeks. Keeping my fingers crossed.
Thanks for the information and infinite Blessings brother 🤙🏿🇺🇲💪🏿
nice vid...glad I beat Steve Rob.. i replaced a ERG valve once took me 3 hours... bolt head snapped off had to drill it out and retap it...lol
+RICKAFIX Yes me too! Seems like it was the old Ford Ranger EGR's that would break off bolts when removing. Sad. This one is a cake walk for sure. Steve is missing out!!!
Hello, your right on, in my case the tube had rot holes in it,easily missed so I replaced the tube and valve and cannot get rid of code p0405? voltages are good! put old valve back and still the same. c0561 is caused by this for sure! let me know any thoughts?
this is very helpful..thank you
Thank you for this video!
You bet!
Great vid. Thank you
Hi there 1st thank you for the great job on this video, but I have a question cause we changed the part cleared the codes and unfortunately the "Service Stabilitrak" error message came back! Except this time we don't loose power while driving! Any suggestions as to what else it would be?
Hi and thank you for stabilitrak video. What size socket did you use for those bolts? Mine is the 07 Torrent
Thank u so much. My kids can get school clothes now. God bless
A+ vid, thanks!
My buddy and I were able to change the egr valve but I noticed when I took off my oil cap how low my oil level is.
I'm making sure I can top off my oil with regular tap water so it won't overheat just till I get paid this Friday?
Just kidding. Helpful video, thankyou
Have the problem with my 07 Equinox, taking it to my Dad's tomorrow to the EGR valve replaced so we shall see if all the lovely lights go away! Other than the annoying lights on the dash it drive great.
I hope it works. Let us know how it goes. Take care
Yes, we replaced the EGR Valve and all lights were gone. Haven't had anymore problems. I just have one question what the heck does the EGR Valve have to do with the Traction Control and Stabilitrac?
Nothing. They just figure since it's an engine control and the engine is related to the traction control system that it should illuminate the check engine and traction control light whenever an engine code sets. I think they really just want to scare the crap out of the owner so they bring it in for service.
Nice & easy one to get at... usually they are buried in a not so easily reachable area! :)
+Thomas EXOVCDS We all need some gravy once in a while!
I had this happen to my 2013 Equinox over the weekend. Went from Fla to TN, when I started the car the next day, it shuddered, and the "StabiliTrak" notice popped up with the Chrck Engine light, but after 1 minute it went away. I was able to make it back home to Fla yesterday and it never did come on again, but I'm getting it checked out today
Was it the EGR valve
EGR???
Thank you my friend
Hey guys, thanks for the video, I have those two codes intermittently : C056D and C0561. Any ideas ? Stabilititrack is on as well as ABS and ESP.
There is an updated egr valve with a new plug in too.Has to be programed with the Tech 2 after being replaced.The tube also gets bad causing an exhaust leak
Thanks
I’m no mechanic by any means and I Believe I came to the right place but just to make sure would this issue make it so when u come to a stop and go again would engine kind of rev up as it moves slowly and I really hope I asked this question properly you see I was on my way to work and noticed my traction service light on for my 2009 Chevrolet Equinox I’m uncertain if it’s a 3.4 but I’m just trying to have some questions answered as I have a baby on way next month and Christmas next week I just bought this vehicle beginning of last month
Hi Car Doctor, 08 Torrent 3.4L 197000km with stabilitrak traction control and P0404 lights on. I have 5V at the egr connector and 11.9V going to GND at the connector. I replaced the egr valve with a Delphi and the tube as it had a crack in it. Cleared the codes with a scanner. 1 day later it all comes back. Should I replace the egr again but with a GM one or do I have another problem? Thanks in advance.
Thank you for your help I have a 206 Good battery turn 🗝️ to on or start position no dash lights not getting power to area in fuse box under hood also fuse box inside the car wire's from pcm have power where do I start checked all fuses they are good
What’s a 206?
Alaska. You on it brother. Thanks ooodles and oodles dudle
Awesome I’m about to go check mine now
good luck!
that was helpful on the back plug i was woundering how to get to them
they never make it simple do they? Glad it helped. Take care
You are awesome. Thank you.
Hello the car doctor, do you know how hard is to replace the exhaust manifold of a 2006 equinox? I want to do it myself
Would replacing the EGR valve work for this problem if there is no check engine light just the traction control light and stabilitrac?
Have a 09 Pontiac torrent that the rear brake light and turn signal stopped working after the abs light came on. Any ideas? Abs light is no longer on and Heard it could be the abs sensor. Thanks
I have a question I’ve had several guys look at my 2010 Chevy Equinox and no one can find the problem. When driving my suv it feels like I’m smashing the brakes but I’m not after about 20 mins my suv will come to a complete stop it won’t go over 20 mph and that’s max . I disabled the abs module to see if it needed replaced and took the fusses out and that’s not the issue. So I put everything back to the way it was and it’s not getting any better. Can you please let me know what could be wrong with my car the stability light is on and the tire pressure light is on and the check engine like . The stability track light comes on right before it locks up and it’s all four tires .
thanks Doctor
I have a question about this.. I have this grinding sound. Feels like it's right under my feet when I drive or hit the break. Now when I do my ABS comes on traction control, when this happens I don't hear anymore grinding sound it runs smoother.. My 08 Equinox was in the shop for a week & they couldn't figure it out.. So we replaced front & rear breaks, the ball joints, inner & outer tie rods, & the wheel bearing along with an linement... Any tip in what can cause this grinding..anything, anybody. The shop I had it worked at ran me 1300 for all that.. Then they tell me to pick this ABS system or something I'm unaware of & run me another 300,.So I took my keys & left.
No hablo ingles, pero es muy buena TU informacion. gracias,
Hello, Car Doctor. “ Service stabiltrack “ comes up on the dash display on my 2014 equinox. It also starts missing and running like hell when the code comes up. Will the EGR valve also cause me to run like crap?
Is there an access panel for fuel pump? On 2008 equinox
Excellent
To the point
Simple Thanks
Nice video
do you have any video for equinox 2015 sometimes started good sometimes I don't but the battery is good?
My 2006 Pontiac Torrent shuts down randomly and the TC light comes on traction control could that be the same problem you are demonstrating
I changed mine and the line itself and everything's fine except for when I go into passing gear the throws the same code any suggestions could it be the air flow sensor which I cleaned but did not change? Becoming annoying
Hello car doctor am having an issue and I would really like your help . Do u think a transmission on a Jeep liberty 2006 992 aa is same as Dodge Dakota 2006 also 992 aa??
Do you need to reuse the gasket if its direct fit EGR
Hi Tim , Rick usually sleeps till noon , ok buddy I'm getting up at 5am now. Oh yeah Tim you still there buddy, ok I can't see the relation of the code to the egr fault , why would a glitch in the egr cause a stabilitrac code, the only reason I'm asking is because I can. Love the vid brother👍👍
+Steve Rob Its because the tire is connected to the drive shaft which is connected to the transmission connected to the engine (with the EGR valve) connected to the PCM connected to the instrument cluster connected to the service stabilitrac message. Too bad its not connected to your alarm clock or it would never go off. haha, love ya brother
Thank you !
Changed the EGR valve on my equinox, check engine light is gone, but stability track service warning phrase still there.
I have a 2007 Equinox and it making noise when I press on the gas like a motor cycle. do you know what I need to do to fix the loud noise problem. Car Doctor
Hi I'm not sure if this applies to my car, I have a 2017 equinox and it's doing the same thing. Any suggestions?
I have a 2011 equinox that needs a yaw rate sensor, is this basically the same thing?
Hi. Had code p0404. Replaced EGR twice with Delphi and Acdelco. Then wiring harness, tube and ECM. Pretty penny. Still stabiltrak and p0404. Help!
service traction and TC come out on dash on HHR 2007 immediately the shift jumped . any ideas how can I fix.
Can you expand on " check for glitch"
the car doctor, Did the EGR valve come with the new gasket?
Thank you
Once I changed the EGR and reset the codes the lights disappeared.
How did you reset it?
Thanks doctor 👍🏼
You are welcome. Glad you dropped in.
Would the P1779 code pop up because of a P0449 code in the ECU? Those are the only 2 codes I found with my scanner.
Thanks.All fixed per your video, with slighty increased MPG. I had the same exact codes as you stated. I am not sure why an EGR valve would trigger two other codes including the "service stabilitack", but then I cannot figure out my girlfriend either. I owe you a beer. Hope you do not mind. I also included your link to this video on my AMZN purchase review. Its important we help others.
I change the EGR valve and those codes keep coming up to what else do you think it would be
Traction control and ABS lights on at the same time. No CEL. Ideas?
I have an 05 equinox 3400 engine. My abs and traction control light come on when I break. But it don’t do it all the time. What can be the cause of the lights coming on
Hi...mine started just recently...you start car and it shows service traction control,service stabilitract, traction control off on my wife's 07 equinox..has109,000 miles... sometime s if u let it sit it will not come bk on...does the fix in the video fix all those .. thanks
eric rushwin change plugs or regap old ones
Do you have a similar fix for a 2013 equinox with service stabilitrak message?
quite helpful thanks
Glad you found it helpful. Thanks for watching
I have a 2013 chevy captiva I have that message on my dash would it be the same problem
My Vehicle has a check engine light, TC light, ABS, and Brake light. Would this problem cause the Brake light to come on too?
thank you 👍😄
Hello Car Doctor, so i just replaced the EGR Valve on my 2007 Equinox thanks to this video you posted and need to know how to reset the codes? will disconnecting the battery reset the codes?
danny dybala yes disconnect for 5-10 minutes.. should clear all codes
Nop you need to clear the code from the ECM you need a scanner
Jose Morales And u can find cheap scanners at Harbor Freight for $15-35.
so 120 dollars later My stability light is still on,,,, thank you you tube .. Why i took a shot and changed the egr valve is beyond me lesson learned
did you clear the codes or check them first?
yep I have been reading up on the service stablitrack and service traction control and there are videos ranging from All i did was change the EGR valve to All I did was change the ground wire to the block.. Everyone else says they have had it in time after time after time.. There isnt a specific fuse on the 2007 torrent to just say screw it and pull it If I ever find the fuse responsible you can betcha I would throw it as far as I can. Im sure the dealer will say its this and this and this and 1,900 dollars later its something else now.. This is what you get for buying a piece of crap.. No wonder pontiac went under.
Mine had a significant crack in the tube where it’s welded. Heard all kinds of stupid ideas about the stabilitrack light changed tube problem gone
Please Help!! The codes that mine is throwing out is P2138, P0700, P1125 and P0120. The ABS and TC lights have been on but now my check engine light has come on. Please tell me uf this would be a fix for my suv.( 2006 equinox)
I have a 2010 Equinox LTZ and it did it a few times last winter and was great all summer, was -2 the other night and it did it and the past 2 days did it bad again was -17 in toronto this am....you think it might be same thing
+George Craig Do you have the same codes I listed here?
l have 2006 Chevy equinox LT and the fuel gauge not working and I have engine light on when I take off get plug off the gauge work normally
Wow this is the only part I needed to fix it’s simple
Hello Car Doctor, I have a 2011 Chevy equinox and it was running fine until we had a snowstorm in Soldotna.my service stability track and engine light is on as well. Could the EGR valve be the cause of these lights appearing on my dashboard? There was also a message that appeared to say “engine is at reduced speed”
I think your problem is likely related to a throttle position sensor issue but might be a warranty covered repair. I would recommend having it inspected at a dealership or have someone pull the codes and see if there are any throttle position codes that might relate to the TSB and special service coverage for this problem. Good luck