I wish I could see one of these in person but we dont see over 7 series here. Has John Deere ever thought of putting a small bathroom in these machines? Thanks!
i have to ask why have yous move away form a flexible articulating joints to a rigid one? wouldn't a rigid one put to much stress on some of the tracks on rough terrain? even lifting a track of the ground. here in the part of Australia where i live we have a Stiger Wildcat III the ground is rough as hell if we didn't have a flexible articulating joint we would get wheel lift for sure.
Justin, thanks for your interest! We don't comment on future offerings, but encourage you to keep in touch with your local dealer and check back regularly to Deere.com/New for quarterly product introductions.
John Deere is a good product, however it needs to keep up with the 21st century engine technology. All big and small machinery depends on more than just good hydraulics and state of the art electronic controls however one thing is always left in the 20th century is the engine vs power density factor. Cummins/Achates new engine technology is pushing the envelope but luckily there’s a new engine technology out the that can overcome their engine technology by more than 20%. JegmTech engine technology can out torque, can out perform their new engine with a new effective stroke technology. Cummins/Achates relies on the effective stroke and not the actual stroke to produce power, JegmTech found a solution to combine the actual stroke and effective stroke into one. Mover over Achates JegmTech is here to stay. I hope John Deere is curious enough to see and verify for themselves. Looking forward to speak with John Deere.
Jeremy, thanks for asking. Our tractors are made all over the world, including here in the United States. Our 9RX Series Lineup are manufactured in Waterloo, IA. Check out some of our other locations here: bit.ly/2NZDOo1.
When are you going to "innovate not imitate" the fan drive on the cummins equipped models? Your vari cool fan system used on the smaller models and the 8Rs is the very definition of stupidity. I feel like i am constantly having cooling fan issues.
You just have to replace the belt every couple hundred hours an you won't have any issues just add the belt to your regular maintenance list an you'll be fine
I’m still waiting I have a9620rx and after having it for two years I think it’s the poorest built and most expensive compared toCase IH and versatile I’m not waiting on John Deere for anything anymore
life long case user here. cannot wait to dump my quads for these deeres. they are superior in more or less every way, make the quads look and perform like junk boxes. so enjoy your new junk box on tracks.
Obviously I've never bought a case tractor and watch the resale value of a just keep going down down down John Deere is so far ahead Case IH in the tractor business and son it's unreal
That southern accent is whats making it. Perfection!
“Nothing runs like a Deere”
Good job John Deere 👏🏻
Legend has it this was created in three hours. Can someone at deere weld another set of tracks on the back so it can plow deeper?
JOHN DEER SHOULD HAVE GOT JASON OF BIG TRACTOR POWER VIDEOS TO SHOOT THIS VIDEO AND TELL US ABOUT THIS TRACTOR
The Beast
That is a beautiful thing
Nothing runs like a deere
I want those in fs19 dlc along with the wheeled one and some Deere equipment! Come on Giants!
Check out Siid Modding on Facebook
She's absolutely marvels.
Fo you know what john deer tractors will be in farming simulator 19?
Isaac rocks CANT FRICIN WAIT
and 17 if you have a PC.
jfdb59 I have console
Ah that's unfortunate. Well you should be excited for 19 then! I'm waiting to make sure it has the functionality of my modded 17 game.
@@jfdb59 omg, firist pc gamer ive seen who doesnt just start to diss consolegamers when they say that they play on console
To many moving parts, Versatile nailed it with the delta track, and 200k cheaper then a green machine
I wish I could see one of these in person but we dont see over 7 series here. Has John Deere ever thought of putting a small bathroom in these machines? Thanks!
If you need a bathroom you're not a farmer!
iyi sürücü
i have to ask why have yous move away form a flexible articulating joints to a rigid one? wouldn't a rigid one put to much stress on some of the tracks on rough terrain? even lifting a track of the ground. here in the part of Australia where i live we have a Stiger Wildcat III the ground is rough as hell if we didn't have a flexible articulating joint we would get wheel lift for sure.
B I G pullin boi
#Deere power #nothing run like a deere
But a case quad will out pull it every time 🤷♂️🤷♂️😂
Colby Mack red stays in bed
Where was this video filmed. The part with the rolling hills
These were introduced 3 years ago in 2015.What is the point of this?
It was updated with new features, kind of like when car manufacturers change technical aspects without changing the look of a machine.
Fellow railfan
When you REALLY have to harvest the crops.
Will you be offering an IVT Transmission option for the 9r series soon?
Justin, thanks for your interest! We don't comment on future offerings, but encourage you to keep in touch with your local dealer and check back regularly to Deere.com/New for quarterly product introductions.
Does anyone know the name of the songs in this video? Thank you.
Sqore Squad - To The Top
John Deere is a good product, however it needs to keep up with the 21st century engine technology. All big and small machinery depends on more than just good hydraulics and state of the art electronic controls however one thing is always left in the 20th century is the engine vs power density factor. Cummins/Achates new engine technology is pushing the envelope but luckily there’s a new engine technology out the that can overcome their engine technology by more than 20%. JegmTech engine technology can out torque, can out perform their new engine with a new effective stroke technology. Cummins/Achates relies on the effective stroke and not the actual stroke to produce power, JegmTech found a solution to combine the actual stroke and effective stroke into one. Mover over Achates JegmTech is here to stay. I hope John Deere is curious enough to see and verify for themselves. Looking forward to speak with John Deere.
I dont undersatand the concept of less cost in agriculture, because this tractor cost as much as 2 brand new Lamborghinis
underSATANd xD
(actually understand)
Are all of your tractors made in Waterloo?
Jeremy, thanks for asking. Our tractors are made all over the world, including here in the United States. Our 9RX Series Lineup are manufactured in Waterloo, IA. Check out some of our other locations here: bit.ly/2NZDOo1.
Thanks For the reply I was curious about that
When are you going to "innovate not imitate" the fan drive on the cummins equipped models? Your vari cool fan system used on the smaller models and the 8Rs is the very definition of stupidity. I feel like i am constantly having cooling fan issues.
As long as you only "feel like" then that's okay because feeling is different than documented problems.
Buckhorn Cortez No no what Jay means is the JD 's he owns probably has had cooling fan issues every few years. I suppose
You just have to replace the belt every couple hundred hours an you won't have any issues just add the belt to your regular maintenance list an you'll be fine
I’m still waiting
I have a9620rx and after having it for two years I think it’s the poorest built and most expensive compared toCase IH and versatile
I’m not waiting on John Deere for anything anymore
Gumbo Stew you're an idiot
chrsmcwtrs maybe so but my next one will not be a John Deere the one I have is for sale if you are interested
life long case user here. cannot wait to dump my quads for these deeres. they are superior in more or less every way, make the quads look and perform like junk boxes. so enjoy your new junk box on tracks.
@@gumbostew3676 I bet money you don't own any tractors!
First
Case ih better
You mean because to get into the articulated tractor business they had to buy Steiger, and buying Steiger makes them better?
Obviously I've never bought a case tractor and watch the resale value of a just keep going down down down John Deere is so far ahead Case IH in the tractor business and son it's unreal
Says the one watching a John deere video