Wayne. I so appreciate that you are willing to show the mistakes and goof-ups. It makes me feel a lot better when I do something dumb. Because I'm still learning, I do dumb stuff a lot....
As a brand new boating enthusiast, I literally got my first boat last week, I'm 44, I'm learning as I go and I really appreciate the balls it takes for someone to post a video that shows the mistakes one could make first times out. Really appreciate it. Thank you Wayne, and thanks for the giggles too. Happy boating!
Hey Wayne. Nice boat, man! I got one just like it a month ago! Mine is a 1965 SmokerCraft and it looks like it was never put in the water!! Kept in the garage it's whole life. Sanded it down, primered and painted it. Its beautiful. After that I asked ChatGPT what size motor to put on it and it suggested a Mercury 9.9. The next day I took it's advice and bought one. Lemme tell you something, @7:27 you say it'll get up to 8 mph. With a 9.9, it'll PLAIN at 8mph! When you're REALLY hauling ass, the bottom of the boat flexes. I have a few clips at full speed if you want to see. It gets pretty sketchy, NGL. I also have a Minn Kota Power Drive with 55ft thrust. I'm planning on mounting it on the front with the Optima yellow top battery. Later today I plan to cut the plywood to make a small deck/platform that will cover the front seat. I've had it out once. I made ALL your mistakes. I thought I understood oars too....don't feel bad one bit hahaa. I actually got mad at myself for not being able to row. It took 20 minutes but I got the hang of it. I needed to watch your videos first. Everyone wants their videos to only show the best parts but you show pointers and things that you mess up. I appreciate that because when I do it on the lake...I don't feel like the only guy who's done this. I love your videos and I hope you continue to find boats you love and make videos about them!
Thanks for sharing. Im doing the same thing. Obtained a 70's vintage Sears 12'. Freshening a 50's era Evinrude 7.5hp. Dont know a thing about boats, but I'm learning. I hope to be making all of the same mistakes in a month or so.
Im not gonna lie I laughed wayyyy to hard at this! Especially the part when you first start the motor and start running into things. We've all done it, it nice though that you admit your mistakes, most guys would never say they messed up. Great video
I’ve seen many of your videos but this is the first time this one popped up on my CZcams Home Screen. Having only a canoe for many years the first time I launched my 1960 Sears 12 foot v hull aluminum boat, I forgot to put the drain plug in. Having no trailer for that boat,my 8yr old son and I carried it to the edge of the lake then loaded it up with fishing gear, safety gear, trolling motor,battery and anchor. The boat came with full sized oars so I used one to shove off hard from the shore. It was a good push and by the time I stowed the oar sat down we were about 20 ft out when my sons said, “hey dad why is there water coming in the boat?” As quick as I could, I got to the middle seat, pulled out the oars and started rowing but wasn’t going anywhere. My son again, “Uh dad, your new battery is sinking!” So I jumped in chest high and dragged the boat back to shore. I know it would have been smarter to put the plug in before I tried to row back to sure but that’s difficult to do when it’s on the front seat of the pick up truck. As soon as I goy home I permanently attached the plug to the boat with a stainless steel cable. Year later we took the boat out on its first run in the great South Bay with a 1852 3hp Evinrude Lightwin that my son and I had just freshened up and got running. Made the same mistake you did. Motor is forward only and I started it facing land. Took off like a jackrabbit but reacted a little too slow and as I made the turn the motor bottomed out and spun the prop. Momentum carried us quite always out but at least this time I was able to row back to shore. You’ve been a good (or bad, if you ask my wife) influence and we’ve recently upgraded to a 1961 StarCraft 14foot aluminum V with a few leaky rivets and a trailer. My buddy gave me his dad’s 1976 Johnson seahorse 15 which hasn’t run in 30 yrs. So let the learning curve continue.
OMG THANK YOU! I'm trying to figure out how to launch and use a boat for the first time and seeing all the oopsies was soooo very helpful. Thanks for being man enough to educate people!
For launching by myself, I like to tie a line that is about 20 feet long to the bow and the other end to the winch area of the trailer. The line is coiled neatly in the bow. Back up the trailer and then tap the brakes to dislodge the boat and get it out into the water. The line will stop it from floating away. Then slowly pull forward until the trailer is mostly out of the water, but the boat is still floating free. Then I get out of the truck, untie the line from the trailer and then walk the boat over to a cleat and tie it off. Then park the truck and go fishing.
I have a little pelican intruder I put some seats in with my 2.6 Coleman outboard and let me tell you it’s a joy having a plastic Jon because when I slip up like this I don’t have to worry about any real damage other then some side scratches 😂 but man I had every problem under the sun my first time launching
Man, I would have payed good money to be sitting on that dock that morning 😂 thanks for sharing man. Trial and error. I don't know that I've ever seen an outboard without neutral.
I need a video of someone explaining the very basics of a Mercury 2.2 engine. Like, starting with filling it with gas ( I got a mix of fuel and oil in one- expensive but much better for the engine, right? ) and explain the choke and all the other dials- just a quick walk through. (How many times do you press the choke? Do you open something to let the gas mixture "breathe"? If you fill the tank how far will you get / or approximately how long will it run at a medium speed? How do you winterize it?
Thanks for being honest and showing what a lot of beginners go through especially when launching a boat solo with a new motor. I've watched several videos on different model 2.5 hp gas motors and I noticed several have some automatic clutch without an actual gear actuator (like you'd find on gas scooters). I am thinking I'd appreciate the control of the gear actuator when close to docks or shore. How do you like the your motor a couple of years later? Don't worry most of us could simply paste our face on your video and it would all be true! :) Thanks
The biggest drawback with this particular engine is the 'no neutral' aspect. It makes it impossible to manage my speed when I am in a marina etc. These days I usually shut this down and paddle or use electric motors. If I were shopping for a small gas engine again, I would only get one that could shift into neutral.
Great tip I don’t think it was a mistake necessarily just a good wake up call before hitting the water especially with the dangers that can occur that are unsceen
To launch solo, disconnect boat from winch, using separate 20' rope, tie bow of boat to back of trailer. coil up rope so it can deploy freely without getting snagged, set coiled rope on boat seat, back trailer into water until boat floats off trailer. Boat keeps moving backwards, uncoiling the rope and paying it out until it becomes taut. Once the rope is taut, drive truck slowly forward, pulling boat back to shore. Disconnect rope, park truck and trailer, and go boating!
Nice little Motor, if u cant get used to the no Neutral, then u schould prefer the Tohatsu 3,5, it has neutral. The Yamaha Malta also is a very good 3hp engine.
How did this little boat hold up near the mouth of the river? Found a good deal on a 12 footer just like this, would like to set it up for fishing the South/ Severn rivers in MD, and shoreline structure on the bay at the river mouths. Calm days of course. Kayaks hold up just fine out there, just wondering how this would compare
Awesome video. I have the same outboard, but mine has a "neutral" and a "foward" position. I think it is due to the fact that i live in Brazil and probably mercury has this especific version avaliable here.
you should steer the boat with your left hand, becuase is you ever decide to upgrade your motor the shifter could be on the starboard side of the motor
Was thinking of buying this engine was afraid it wouldn't push thru stronger current down here on the California delta i also have a 12ft aluminum boat and those were my concerns on not enough power from the 2.5 hp .
I got a 4hp mariner that feels like a snail on a 12ft fibreglass crealcraft that motor seems like it does very well I'm trying to upgrade to a 15hp johnson
I think it be totally OK to put that 7.5 hp motor on that boat a friend of mine has a 12 footer just like that and he has a 9,9 on it and he still has a lot of free board two people and a bunch of fishing gear as long as your transom is structurally sound it would be fine
The problem with my old 7.5 on this boat is the weight of that particular engine and the length of the shaft. This boat wouldn't like that heavy old thing on the back!
Hi Wayne, Thanks for the videos, many were very helpful for me and my power boat (specially useful) the one showing how to remove the steering control. I had galvanized the pin and it took me days!!!. The reason I'm commenting is because I got a 2005 mercury 2.5 M (with ignition problems). I figure it out what happens. An screw somehow got inside the flywheel and broke the cable from the coil exciter (bad new but good that did not continue running). But my question is does this mercury 2.5 M have pulse trigger? It has CD and Ignition coil but I can't find the pulse trigger. Do you know if the coil exciter is doing the job of a pulse trigger also in this model. I would appreciate is you can help me with this question. Thanks. Best Leo
Looks like fun! Thank you for sharing-your channel is refreshing. I’m a new boater as well, doing the same stuff. I’ve learned so much and look forward to more videos and more boating! Looking into a trailer and 2.5 gas motor for my West Marine dinghy-I’m encouraged to get beyond my little lake by my house. Your videos are great and really help. Keep it up and be safe!
@@WayneTheBoatGuy Thanks. I'm wondering if I should upgrade my Honda 2.3 HP on a 10 footer to 5 HP, any thoughts? Do you know how fast a 5 HP can go with the small boat?
Oh! Geez! ..8 miles an hour! lol I could run faster than that! Lol GREAT Video! I'm pretty well about to do the same thing! I've just purchased a 12' boat with a 6 HP motor! I'm pumped for the ADVENTURE! ...and maybe I'll find a TREASURE! Lol If I ever see you on the water, I'll challenge you to a boat race! My 6HP is a pretty formidable foe though! lol
@@WayneTheBoatGuy Yes! I will 'seriously' be careful out there! I will be mindful of that whorly thing at the back of my boat! Too bad you've already lost the competition with your little put put! lol If you throw the anchor overboard, it may give you an edge on speed! lol Last Friday, I drove into town for licence plates! Wouldn't you know! The Easter Bunny had claimed all days until Tuesday! The Easter Bunny is torturing me! *%# Well, I guess the kids need some Easter egg fun.
Wayne. I so appreciate that you are willing to show the mistakes and goof-ups. It makes me feel a lot better when I do something dumb.
Because I'm still learning, I do dumb stuff a lot....
Thanks! We all do dumb stuff and hopefully we can all learn from the mistakes of others along the way!
As a brand new boating enthusiast, I literally got my first boat last week, I'm 44, I'm learning as I go and I really appreciate the balls it takes for someone to post a video that shows the mistakes one could make first times out. Really appreciate it. Thank you Wayne, and thanks for the giggles too. Happy boating!
Have fun!
Hey Wayne. Nice boat, man! I got one just like it a month ago! Mine is a 1965 SmokerCraft and it looks like it was never put in the water!! Kept in the garage it's whole life. Sanded it down, primered and painted it. Its beautiful. After that I asked ChatGPT what size motor to put on it and it suggested a Mercury 9.9. The next day I took it's advice and bought one. Lemme tell you something, @7:27 you say it'll get up to 8 mph. With a 9.9, it'll PLAIN at 8mph! When you're REALLY hauling ass, the bottom of the boat flexes. I have a few clips at full speed if you want to see. It gets pretty sketchy, NGL. I also have a Minn Kota Power Drive with 55ft thrust. I'm planning on mounting it on the front with the Optima yellow top battery. Later today I plan to cut the plywood to make a small deck/platform that will cover the front seat. I've had it out once. I made ALL your mistakes. I thought I understood oars too....don't feel bad one bit hahaa. I actually got mad at myself for not being able to row. It took 20 minutes but I got the hang of it. I needed to watch your videos first. Everyone wants their videos to only show the best parts but you show pointers and things that you mess up. I appreciate that because when I do it on the lake...I don't feel like the only guy who's done this. I love your videos and I hope you continue to find boats you love and make videos about them!
Thanks for sharing. Im doing the same thing. Obtained a 70's vintage Sears 12'. Freshening a 50's era Evinrude 7.5hp. Dont know a thing about boats, but I'm learning. I hope to be making all of the same mistakes in a month or so.
Take your time and try to learn from my mistakes!
Im not gonna lie I laughed wayyyy to hard at this! Especially the part when you first start the motor and start running into things. We've all done it, it nice though that you admit your mistakes, most guys would never say they messed up. Great video
your an honest guy kudos!
Thanks!
I’ve seen many of your videos but this is the first time this one popped up on my CZcams Home Screen. Having only a canoe for many years the first time I launched my 1960 Sears 12 foot v hull aluminum boat, I forgot to put the drain plug in. Having no trailer for that boat,my 8yr old son and I carried it to the edge of the lake then loaded it up with fishing gear, safety gear, trolling motor,battery and anchor. The boat came with full sized oars so I used one to shove off hard from the shore. It was a good push and by the time I stowed the oar sat down we were about 20 ft out when my sons said, “hey dad why is there water coming in the boat?” As quick as I could, I got to the middle seat, pulled out the oars and started rowing but wasn’t going anywhere. My son again, “Uh dad, your new battery is sinking!” So I jumped in chest high and dragged the boat back to shore. I know it would have been smarter to put the plug in before I tried to row back to sure but that’s difficult to do when it’s on the front seat of the pick up truck. As soon as I goy home I permanently attached the plug to the boat with a stainless steel cable.
Year later we took the boat out on its first run in the great South Bay with a 1852 3hp Evinrude Lightwin that my son and I had just freshened up and got running. Made the same mistake you did. Motor is forward only and I started it facing land. Took off like a jackrabbit but reacted a little too slow and as I made the turn the motor bottomed out and spun the prop. Momentum carried us quite always out but at least this time I was able to row back to shore. You’ve been a good (or bad, if you ask my wife) influence and we’ve recently upgraded to a 1961 StarCraft 14foot aluminum V with a few leaky rivets and a trailer. My buddy gave me his dad’s 1976 Johnson seahorse 15 which hasn’t run in 30 yrs. So let the learning curve continue.
OMG THANK YOU! I'm trying to figure out how to launch and use a boat for the first time and seeing all the oopsies was soooo very helpful. Thanks for being man enough to educate people!
Well at least you remembered to put the drain plug(s) in .
For launching by myself, I like to tie a line that is about 20 feet long to the bow and the other end to the winch area of the trailer. The line is coiled neatly in the bow. Back up the trailer and then tap the brakes to dislodge the boat and get it out into the water. The line will stop it from floating away. Then slowly pull forward until the trailer is mostly out of the water, but the boat is still floating free. Then I get out of the truck, untie the line from the trailer and then walk the boat over to a cleat and tie it off. Then park the truck and go fishing.
Love the Red Green'esk videography at the beginning!
Thanks!!
I have a little pelican intruder I put some seats in with my 2.6 Coleman outboard and let me tell you it’s a joy having a plastic Jon because when I slip up like this I don’t have to worry about any real damage other then some side scratches 😂 but man I had every problem under the sun my first time launching
Yeah it can be a steep learning curve that's for sure!
I've got a 2hp Honda on an 8ft jon boat and that's just right for river and creek cruising. Nice boat you have.
Nice! I like those little Hondas. Thanks for watching!
Wisdom can be acquired from others mistakes. Thanks.
Looks like a fun day on the water
Dude what are you talkaing about??..... the beginning was the best part of the video lmao
Man, I would have payed good money to be sitting on that dock that morning 😂 thanks for sharing man. Trial and error. I don't know that I've ever seen an outboard without neutral.
Apparently quite a few of these really low hp outboards lack neutral - and it makes for interesting experiences!
@Wayne The Boat Guy now that I think about it, idk if I've ever had anything smaller than 10hp. Pretty interesting.
I need a video of someone explaining the very basics of a Mercury 2.2 engine. Like, starting with filling it with gas ( I got a mix of fuel and oil in one- expensive but much better for the engine, right? ) and explain the choke and all the other dials- just a quick walk through. (How many times do you press the choke? Do you open something to let the gas mixture "breathe"? If you fill the tank how far will you get / or approximately how long will it run at a medium speed? How do you winterize it?
I do have a video about starting this engine which might answer some of your questions - czcams.com/video/EDIBSDMN2Ns/video.html
Thanks for being honest and showing what a lot of beginners go through especially when launching a boat solo with a new motor. I've watched several videos on different model 2.5 hp gas motors and I noticed several have some automatic clutch without an actual gear actuator (like you'd find on gas scooters). I am thinking I'd appreciate the control of the gear actuator when close to docks or shore. How do you like the your motor a couple of years later? Don't worry most of us could simply paste our face on your video and it would all be true! :) Thanks
The biggest drawback with this particular engine is the 'no neutral' aspect. It makes it impossible to manage my speed when I am in a marina etc. These days I usually shut this down and paddle or use electric motors. If I were shopping for a small gas engine again, I would only get one that could shift into neutral.
These videos are great for someone starting out, thank you
Thank you
Yes, that was a great video starting from chapter 3. However, sharing follies is important too.
thanks for sharing. i'm thinking about getting the 2.5 4 stroke
reminds me of a RED GREEN episode
Great advises ! Thank you.
Hopefully this is me in the future
Great tip I don’t think it was a mistake necessarily just a good wake up call before hitting the water especially with the dangers that can occur that are unsceen
This was a fun watch!
Thanks!!
To launch solo, disconnect boat from winch, using separate 20' rope, tie bow of boat to back of trailer. coil up rope so it can deploy freely without getting snagged, set coiled rope on boat seat, back trailer into water until boat floats off trailer. Boat keeps moving backwards, uncoiling the rope and paying it out until it becomes taut. Once the rope is taut, drive truck slowly forward, pulling boat back to shore. Disconnect rope, park truck and trailer, and go boating!
this is a beach launch by the way. don't do this at the ramp guys.
Nice little Motor, if u cant get used to the no Neutral, then u schould prefer the Tohatsu 3,5, it has neutral. The Yamaha Malta also is a very good 3hp engine.
Thanks! I always have my eyes open for the next little motor.
yàñhà beaßt or cruseñ çàrtty 2,7 hp air çolled
How did this little boat hold up near the mouth of the river? Found a good deal on a 12 footer just like this, would like to set it up for fishing the South/ Severn rivers in MD, and shoreline structure on the bay at the river mouths. Calm days of course. Kayaks hold up just fine out there, just wondering how this would compare
Best honest video by far. Thanks
Awesome video. I have the same outboard, but mine has a "neutral" and a "foward" position. I think it is due to the fact that i live in Brazil and probably mercury has this especific version avaliable here.
That’s interesting. This motor is actually made by Tohatsu and it’s from 2004. Maybe they made some improvements thanks to goofs like me!
Is your Mercury 2 stroke too?
@@jimmielittle877 yes, two stroke. Very nice little engine.
The 3.3hp was equipped with these features. Not the 2.5 that I know of.
you should steer the boat with your left hand, becuase is you ever decide to upgrade your motor the shifter could be on the starboard side of the motor
i might be wrong because of the camera so you might be steering with your left.
No you're correct - and that's brilliant!
@@WayneTheBoatGuy ya that’s why they setup tiller boats for left handed steering. great video tho, keep up the good content
Man, I'd spring for a 6hp with F/N/R selection !
Yeah I had no idea how much I missed having neutral and reverse.
One tip here- always bring the correct oars even though you have the outboard. They will get you out of trouble more than once.
Was thinking of buying this engine was afraid it wouldn't push thru stronger current down here on the California delta i also have a 12ft aluminum boat and those were my concerns on not enough power from the 2.5 hp .
If there are strong currents, 6 or 9.9 might be more appropriate.
Great video!
I got a 4hp mariner that feels like a snail on a 12ft fibreglass crealcraft that motor seems like it does very well I'm trying to upgrade to a 15hp johnson
What's the top speed you got out of the mercury.
I have this exact motor but know nothing about it. Can you give me any details so I can order extra parts for it or find a manual.
Fun , wish Las Vegas have river 😊
What was your top speed with this you’d estimate? 5 mph?
I think at one time I got this motor up to 6 mph.
Awesome 😂
I have an old 10 foot Crestline.. with a 2hp honda...simple set up
Nice!
It looks beautiful out there. Did you see any strange animals? Besides humans?
There were some interesting bird sounds on the island, and a goose in it's nest nearby, but nothing strange.
I've never launched my boat at the ramps yet lol just reverse it into a lake got a good 2 acres to back into lmao
Awesome. That makes it so much easier.
I successfully launched my boat with the help of our game officer lmao
Very funny 👍🤣
I think it be totally OK to put that 7.5 hp motor on that boat a friend of mine has a 12 footer just like that and he has a 9,9 on it and he still has a lot of free board two people and a bunch of fishing gear as long as your transom is structurally sound it would be fine
The problem with my old 7.5 on this boat is the weight of that particular engine and the length of the shaft. This boat wouldn't like that heavy old thing on the back!
Hi Wayne, Thanks for the videos, many were very helpful for me and my power boat (specially useful) the one showing how to remove the steering control. I had galvanized the pin and it took me days!!!. The reason I'm commenting is because I got a 2005 mercury 2.5 M (with ignition problems). I figure it out what happens. An screw somehow got inside the flywheel and broke the cable from the coil exciter (bad new but good that did not continue running). But my question is does this mercury 2.5 M have pulse trigger? It has CD and Ignition coil but I can't find the pulse trigger. Do you know if the coil exciter is doing the job of a pulse trigger also in this model. I would appreciate is you can help me with this question. Thanks. Best Leo
Not bad for 2.5 hp.
That little boat would fly with a 6hp on it
Yeah it would!
Great video, do you know what prop I should use on my 115 HP Johnson
Sorry I do not. It can be challenging getting the right type as well as pitch and style.
Most guys seem to have one to two % higher (example say 16% then run a 17%or18%)
How much does a 2.5(2stroke)Mercury cost? 8 mph on 2.5 horsepower is fast❗️
I got this one used - 17 years old but used very rarely.
Looks like the magothy river in md
It is!
@@WayneTheBoatGuy I grew up on the magothy! Nice too see someone local making good videos.
Looks like fun! Thank you for sharing-your channel is refreshing. I’m a new boater as well, doing the same stuff. I’ve learned so much and look forward to more videos and more boating! Looking into a trailer and 2.5 gas motor for my West Marine dinghy-I’m encouraged to get beyond my little lake by my house. Your videos are great and really help. Keep it up and be safe!
Appreciate your sharing. May I ask how fast can the 2.5 hp drive this 12 footer? With only you on board, thx!
I think I get it up to about 6 mph.
@@WayneTheBoatGuy Thanks. I'm wondering if I should upgrade my Honda 2.3 HP on a 10 footer to 5 HP, any thoughts? Do you know how fast a 5 HP can go with the small boat?
@@SteveChenFishing I use a 8hp on a 8ft plastic dinghy 15mph fun
@@Kana0211 I think it could go even faster w 8 hp... have you tried full throttle?
Hey Wayne have you seen the propulsion system that works off a cordless drill? I just ordered one on Amazon.
That could be fun!
@@WayneTheBoatGuy I'll let you know when it gets here. It should be worth a review?
What is the price of the motor?
I bought this used from someone down the road from me.
I use a ratchet strap, that rubber band is no good
Oh! Geez! ..8 miles an hour! lol
I could run faster than that! Lol
GREAT Video!
I'm pretty well about to do the same thing!
I've just purchased a 12' boat with a 6 HP motor!
I'm pumped for the ADVENTURE! ...and maybe I'll find a TREASURE! Lol
If I ever see you on the water, I'll challenge you to a boat race!
My 6HP is a pretty formidable foe though! lol
Your 6 hp is almost 3x the motor of my little 2.5! Be careful out there!
6 hp snakes outbard chef reçknñd
@@WayneTheBoatGuy Yes! I will 'seriously' be careful out there!
I will be mindful of that whorly thing at the back of my boat!
Too bad you've already lost the competition with your little put put! lol
If you throw the anchor overboard, it may give you an edge on speed! lol
Last Friday, I drove into town for licence plates!
Wouldn't you know! The Easter Bunny had claimed all days until Tuesday!
The Easter Bunny is torturing me! *%#
Well, I guess the kids need some Easter egg fun.
@@sharonbraselton4302 For the life of me, I can't decipher what you wrote, Sharon!
check you impeller (water pump) your engine is barely pissing, its not normal.
It has a really tiny hose and I'm keeping a close eye on it until I get a new impeller.
👍👍👍👍👍👍👍
I didn't think that such a small engine could get that boat to throw a wake. Looks to me like it's way faster than a trolling motor
It's only about 1-2 mph faster
I find Wayne the boat guy name funny.. cause doesn’t know how
A friend gave me that name as soon as I bought a boat!
i was you i would put a 4 hp motor on you're boat it has gears.
Yeah I dislike the “no gears” part about these little outboards.