How to Fix Whirlpool Washer Shaking Violently During Spin Cycle | OFF Balance | Model WTW4816FW2

Sdílet
Vložit
  • čas přidán 12. 12. 2023
  • In this Video, We have a Whirlpool Top Load Washer, Model WTW4816FW2, In Which the Complaint was that it was Shaking Violently During the Spin Cycle and Sounded OFF Balance. This is one of the Most Common Issues among Whirlpool Brand Washers, Including Whirlpool, Maytag, Admiral, Amana and Some Kenmore Washers. This Problem is Usually Caused By Weakened Suspension Shocks. After Testing Washer, We Found that the Suspension Shocks Needed to Be Replaced. I also Show You How to Put Your Washer in Diagnostic.Test Mode and How to Calibrate Your Washer, In Case it Needs It. I go Step by Step in this Video, So if this is the Issue You are Having in Your Washer, Make Sure to Watch this Video Throughly, So you Can Replace the Shocks in Your Whirlpool Washer.
    Please Like this Video, Share and Subscribe for Future DIY Videos. Support Our Channel by Using the Affiliate Links Below. (By Using them, We do Earn a Small Commission at NO Extra Expense to You) If You Can, You may Also Leave a Tip Below. Thanks For Watching and for the Support.
    Suspension Shocks:
    - Amazon ➡️ amzn.to/3RHZac8
    - eBay ➡️ ebay.us/wcrVK7
    - RepairClinic ➡️ bit.ly/47VNYyi
    Mentioned in the Video:
    Long Sleeve Shirt ➡️➡️ amzn.to/41ibraJ
    Gloves ➡️➡️ amzn.to/4agLZq3
    Screwdriver Set ➡️➡️ amzn.to/3NrWZHd
    ACTIVE Washing Machine Cleaner ➡️➡️ amzn.to/3Nc7HkZ
    Find Some of Our Faves on Our Amazon Storefront!! ➡️➡️ amzn.to/3xPs2rI
    Videos Mentioned ➡️
    - Whirlpool Washer OFF Balance/Banging on Sides: • How to Fix Whirlpool W...
    - Amana Washer OFF Balance: • How to Fix Amana Washe...
    - Amana Washer OFF Balance: • How to FIx #Amana #Was...
    - Admiral Washer OFF Balance: • How to Fix #Admiral #W...
    - Whirlpool Washer Shaking and Hitting Sides: • How to Fix Whirlpool W...
    - Maytag Washer Shaking and OFF Balance: • How To Fix Maytag Cent...
    - Whirlpool Washer Banging on Sides: • How to FIX Whirlpool W...
    Playlist Mentioned ➡️ • Suspension Shocks Repl...
    Sign up For a FREE 30-Day Trial of Amazon Prime and Get Your Appliance Going Faster! CLICK HERE: amzn.to/3BA7Erj
    If this Video Helped you in any way, Consider Leaving a Tip:
    - Buy Me a Coffee ➡️ buymeacoffee.com/diyrepairsnow
    - PayPal ➡️ @diyrepairsnow
    - Venmo ➡️ @diyrepairsnow
    *Please note that Links are Affiliate Links, Which Means by Using them We do Get a Small Commission. This Means You Can Support the Channel at No Extra Expense to you. Thank you for your Support.
    ⚠️🚨⚠️ Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk. DIY Repairs Now, Its Technicians and/or Its Affiliates are NOT Responsible for Any Property and/or Personal Damages, Including Serious Injury and/or Death. Please Be Advised, as You have Been Warned. ⚠️🚨⚠️
    My Filming Equipment:
    Canon M50: amzn.to/2WUHlY5
    Rode VideoMicro Compact Mic: amzn.to/2TqKTzo
    Canon M50 Mount Adapter: amzn.to/2MZv84t
    Joby GorillaPod 3K: amzn.to/2Fn3jgd
    GoPro Hero 7 Silver: amzn.to/2UNHImN
    GoPro Hero 7 Black: amzn.to/2TnPXVd
    GoPro Accessories Kit: amzn.to/2OnilpG
    For Business Inquiries, Please Email diyrepairsnow@gmail.com
    Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!
    - DIY Repairs Now
    #appliancerepair #appliance #appliances #kitchenappliances #homeappliances #repair #dishwasher #kitchen #refrigerator #home #fridge #refrigeratorrepair #oven #washerrepair #homeappliance #authorized #washingmachine #dryer #ovenrepair #service #stove #freezerrepair #dishwasherrepair #maintenance #washer #kitchendesign #dryerrepair #stoverepair #applianceparts #bhfyp #garbagedisposal #whirlpoolappliances #howtofix #Howtoinstall #applianceparts
  • Jak na to + styl

Komentáře • 47

  • @CareBearStare81
    @CareBearStare81 Před 6 hodinami

    Amazing Video ❤ saved 700$$ thank you ❤

  • @stevenharper2926
    @stevenharper2926 Před měsícem +5

    I fixed my shocks (suspension rods), by jamming upholstery foam about 2 1/2" thick by 12" square in the corners. It is keeping my machine from violently shaking now. It works very well now. Hope this help others. Make a video and post it. No need to replace the rods!

    • @vandieselcuuuz
      @vandieselcuuuz Před 7 hodinami

      Might try this to help out my parents free is always an amazing option

  • @BryanAlexander-cb9qo
    @BryanAlexander-cb9qo Před 4 měsíci +4

    Very helpful what a great step by step power point instruction,thanks again!

    • @DIYRepairsNow
      @DIYRepairsNow  Před 4 měsíci

      Glad it was helpful! Thanks for Watching!

  • @RobertMaz
    @RobertMaz Před 2 měsíci +5

    just use the hook end on the shock you remove.

  • @kristyb39
    @kristyb39 Před měsícem

    This is my exact machine. I just removed the tubs to deep clean, due to years of pet hair build up. 😛. Came out beautifully clean. Now its banging as if the devil is trying to escape hell, via my washing machine. It won’t spin all the water out, so my clothes smell…again. I never knew about testing the pump. I’ll do that, then change the shocks.

  • @toririner6589
    @toririner6589 Před 3 měsíci

    This saved me tremendously! Thank you!

    • @DIYRepairsNow
      @DIYRepairsNow  Před 3 měsíci

      Glad My Video helped you Fix Your Washer! Thanks for Watching!

  • @damaryzrodrigues2200
    @damaryzrodrigues2200 Před 4 měsíci +1

    This was very helpful. Thank you!!

    • @DIYRepairsNow
      @DIYRepairsNow  Před 4 měsíci

      Glad it was helpful! Thanks For Watching!

  • @mrcoollu9662
    @mrcoollu9662 Před 4 měsíci +1

    very informative

  • @JoseRodriguez-sx9lp
    @JoseRodriguez-sx9lp Před 3 měsíci

    Thank you very much for your help in getting the washer balancing to back new again 😊. With so little parts compared to the old washers, I was wondering if I needed a new one just being over two years old. But thanks to you that was avoided again thank you so much 😊

    • @DIYRepairsNow
      @DIYRepairsNow  Před 3 měsíci

      You are Very Welcome! I am Glad My Video Helped!

  • @RussBakerOhio
    @RussBakerOhio Před 4 měsíci +1

    Thanks!

  • @jeffreykeith9086
    @jeffreykeith9086 Před 5 měsíci +1

    Good information and illustrations for DIY

    • @DIYRepairsNow
      @DIYRepairsNow  Před 4 měsíci

      Many many thanks! Glad You liked my Video!

  • @luissegovia7087
    @luissegovia7087 Před 2 měsíci

    Thank you very good video!

  • @rmaddox3
    @rmaddox3 Před 4 měsíci

    Awesome video. Where can I purchase the t handle hook you use?

  • @20havenfun08
    @20havenfun08 Před 6 měsíci +2

    Thank you:)

    • @DIYRepairsNow
      @DIYRepairsNow  Před 6 měsíci

      No problem 😊 Thanks For Watching My Video!

  • @dubc4885
    @dubc4885 Před 20 dny

    Nice video!

  • @voluntarichiroiul3478
    @voluntarichiroiul3478 Před 4 měsíci +1

    Thank you very much

  • @terryhelliker118
    @terryhelliker118 Před 2 měsíci +1

    I’ve replaced all 4 rods and even changed the hub but it doesn’t stop the tub from swaying side to side. So when it does a spin cycle it bangs around like crazy. Any other suggestions?

  • @derrillsanders9117
    @derrillsanders9117 Před 5 měsíci

    Thanks 😊

  • @skliros9235
    @skliros9235 Před měsícem

    When spinning the drum empty at full speed, the inner drum don't shake much, but the outer drum shakes a lot. I'm thinking the inner drum is out of round, and transmitting force to outer drum. Does that make sense?

  • @williamhanna5224
    @williamhanna5224 Před měsícem

    Excellent

  • @1miltond
    @1miltond Před 2 měsíci

    For some reason the last balance code light come on but don't flash they stay all on then after 1 a minute it shuts off and still shaking like crazy and the spring are new if I sit on it it will do the spin but otherwise is like coming apart and course don't finish the spinning

  • @user-ps1nf7uk2z
    @user-ps1nf7uk2z Před 4 měsíci +2

    When finished installing the shocks
    there is a small cutp about six
    inches above the shock holder should this be pushed down on the rod ?

    • @DIYRepairsNow
      @DIYRepairsNow  Před 4 měsíci

      Just leave it where it is from manufacturing 👋

    • @user-ps1nf7uk2z
      @user-ps1nf7uk2z Před 4 měsíci

      What is the purpose of this little cup​@@DIYRepairsNow

  • @tedthornton7791
    @tedthornton7791 Před 2 měsíci

    What if it has a wash plate instead of a agitator? How do you manually check it? Thanks

    • @DIYRepairsNow
      @DIYRepairsNow  Před 2 měsíci

      If You Have a Wash Plate or Impeller Instead of an Agitator, You Can do the Test By Grabbing the Sides of the Tub and Pushing Down. Here is a Video as Demonstration: czcams.com/video/NRzb_CxZk8Q/video.htmlsi=bANTwAsGaZ1bpI5a&t=41

  • @crow753
    @crow753 Před 5 měsíci

    Where did you get the shocks from

    • @DIYRepairsNow
      @DIYRepairsNow  Před 5 měsíci

      Links to All Parts Can Be Found in the Descriptikon of the Video.

  • @Talk-_-Sick
    @Talk-_-Sick Před 3 měsíci +4

    I changed the shocks and it still shakes violently whats the deal

    • @terryhelliker118
      @terryhelliker118 Před 2 měsíci +1

      Same here.

    • @robertwilson3275
      @robertwilson3275 Před měsícem

      I was reading up on it myself!! It said the washing machine may bad counterweight spring and damping straps

  • @barcelone1971
    @barcelone1971 Před 4 měsíci +1

    I got the same brand without the agitator, I changed the shocks and still shakes too much, any idea why

    • @barcelone1971
      @barcelone1971 Před 4 měsíci

      And the transmission is good, no noise at all

  • @user-iv3kg2dh4p
    @user-iv3kg2dh4p Před 19 dny

    Get to the point

    • @DIYRepairsNow
      @DIYRepairsNow  Před 15 dny +1

      If You are So Bothered By My Video, There is a free thing Called Exiting Out and Finding Another Video, Which You are More than Welcome to Try, Instead of Coming to the Comments Section and Leaving Rude Comments. Thanks for this, Have a Good One.