Dry Dock 12 Flooded at Newport News Shipbuilding

Sdílet
Vložit
  • čas přidán 14. 10. 2013
  • On Friday, Oct. 11, 2013, Susan Ford Bales initiated the flow of more than 100 million gallons of water into Dry Dock 12, where the aircraft carrier Gerald R. Ford (CVN 78) has been under construction since November 2009. Read the news release: newsroom.huntingtoningalls.com...
    Gerald R. Ford will be christened on Saturday, Nov. 9, 2013 at Newport News Shipbuilding. Learn more about the event and the ship at www.thefordclass.com
  • Věda a technologie

Komentáře • 18

  • @Drobalo
    @Drobalo Před 10 lety +4

    Dear Robo; The strength of dry docks walls and bottom, are as following:On bottom, we have a longitudinal strong beam with 2 meters wide. The permissible load cargo on it is abt. 250 or 300 tons/meter. Out side of this beam, the load cargo support is 35 or 40 tons/meter.The big ships as a weigth distribution no more than 100tons/meter,on midle part. On after part, near to engine room the weigth distribution is no more than 200 tons/meter. For docking, the berth is preparing in order to receive the ship with folloing transverse weigth distribution: 50% of the ship weigth will be support on longitudinal beam, 25%, will be support on dock bottom distribuited for both sides; port and starboard.Sory, for my bad english. I´m Portuguese and i live in Portugal/Europe.

  • @Mod-rw9cw
    @Mod-rw9cw Před 3 lety +2

    The old way was the best. Launch down the slipway!

  • @RoboTekno
    @RoboTekno Před 10 lety +7

    Can anyone tell me how thick the walls and floors of the Dry Dock are? I'm guessing they would have to be pretty darn strong to take the weight of not only the water it holds back, but also the weight of the ship being built inside it :-)

  • @colinmccauley3301
    @colinmccauley3301 Před 3 lety

    imagine that, water is the only thing on earth that can lift an aircraft carrier. amazing.

  • @whiteclifffl
    @whiteclifffl Před 2 lety +2

    Next time they should invite all of the politicians to come down from DC and have them stand at the bottom of the dry dock.

  • @geomodelrailroader
    @geomodelrailroader Před 10 lety +3

    only two milestones left Launch (if your on schedule Veterans Day ) and smashing the bottle on the hull. (also to occur on Veterans Day if your on schedule)

  • @lorenzomaximo1818
    @lorenzomaximo1818 Před 6 lety +6

    Whatever floats your boat.

  • @Drobalo
    @Drobalo Před 10 lety +3

    Regarding the thick of walls: The longitudinal beam as 1 meter thick. The bottom dock as no more than 300 or 500 milimeters. The walls thick is no more than 1 meter.

    • @johneasler9967
      @johneasler9967 Před 6 lety +3

      we don't speak metric in the USA

    • @Korey47
      @Korey47 Před 2 lety

      Yeah we definitely didn’t use millimeters lol

  • @MikeM8891
    @MikeM8891 Před 10 lety +1

    Looks like that's going to take a while.

  • @kbarrett63
    @kbarrett63 Před 3 lety +1

    ok, so I have spent several hours underneath and in the “2nd skin” of CVN-70, but what is inside that “Rudolph Red” bulbous nose?

    • @afc8981
      @afc8981 Před 3 lety

      It's purpose is to reduce drag and increase speed: en.wikipedia.org/wiki/Bulbous_bow

  • @kienvuinh
    @kienvuinh Před 2 lety

    wow very god

  • @piyushgogri5673
    @piyushgogri5673 Před 5 lety

    Hii

  • @partycat2921
    @partycat2921 Před 5 lety

    rip off video- do better next time