Terminator Cobra Front Bumper Installed On The New Edge Mustang GT
Vložit
- čas přidán 10. 11. 2017
- they said it couldnt be done, to install a terminator cobra front bumper on a regular GT...well i proved them wrong!
they said it couldnt be done, to install a mach 1 chin spoiler on a terminator cobra bumper, well i proved them wrong again! - Auta a dopravní prostředky
Hell ya . Picking up a bumper right now at summit . This video convinced me to do this . Messed mine up yesterday in the snow
Good job , very well explained straight to the point on details . Good job ☝🏽
What size self tapping screws did you use for the bezels and fog lights?
Love the editing bro........
Looks hot bro! 🔥 I can’t wait to see this stang lowered!...what a HUGE difference this car is since you first bought it! Sexy!
+vipersyl thanks bro!
Thanks for the help great video 👍🏼👍🏼
What size nuts did you get if you can remember to fit those screw?
Great video. Thank you!
You always want your harness pointing down not sideways so you don’t stretch the wires when you plug it in may sound petty but stretching it could create resistance in the circuit
I bought an aftermarket cobra front bumper on Amazon, the one I bought came with side fender brackets the bumper fit like a glove no gaps no modifications, also I would recommend anyone to buy the LMR Mach 1 chin spoiler it solves the problem of being 1incn short from the side that the American muscle chin spoiler has
The voice of reason can you give me a link of who you ordered the bumper from
I completely agree!!
Do you have the link to the bumper you bought ?
We need the links man 😰
Did you buy it off from late model restoration
Awesome vid
Did your hood line up with it easily... my bumper sits like 2 inches lower than my hood
5 years later and we the people really appreciate this. We are in the process of doing this soon and now I need to order the chin spoiler. Which one was it?
How much would u charge for a custom terminator bumper???
What's up with the maroon F150?
Come dude. That bumper looks like it was installed by Mr. Magoo.
You want him to come for you?
@@jakezielinski6286 lmfao wtf hahahahab
Brian you said looks like dog shit right lol
Nice job ☺
Looks good,black on black on black.
Excellent job bro, you really inspire people like myself to really love working on my cars
what about a custom bumpers that looks like that for teh Vic?
Still don't know how you do it triple black car in the Florida heat
Special needs bro. Special needs.
How bout texas
Very Good
Dope man 👌👌👌👌👌👌👌😍💯
That thing looks siiick!
thanks my boy
Mr Random Reviews all day. Errday
What about the fog light wiring? Does it plug right up to the original GT wiring?
+gevonte15 yes
No it doesn’t. You have to get Cobra fog light pigtails and splice them in. This guy doesn’t know what the hell he’s talking about.
@@MrRandomReviews God you suck. You have 0 friends.
@@codylindenstein2771 lmfao he juat replies and prays it is accepted. Lol freaking liars smh. Crap car. Crap video. Crap life. Triple black shit box in floridian heat! Lol
Hmm that’s very odd cause it worked for me….. I used the stock brackets lol and it lined up and all I got the lmr kit
How did you get the hood to close? The top mounts of the bumper interfere with the gt hood closing.
I had to sand mine down to close the hood over it and the repaint and clear coat
now that looks good
Fixed that stance.
the termi bumper is very strait forward all you have to do is bend the original brackets a little and the termi bumper will fit perfect I have one on my gt no problem and I don't know what u call fitment but its not the same as my fitment mine is nice crisp body lines but yours is terrible but hey man its your car enjoy it I'm just saying mine looks I wish u could at least show how u put the mach 1 chin spoiler on the termi bumper
Great review. Question. Will this bumper fit a 2001 V6?
yes
@@MrRandomReviews okay, thanks.
That Orange peel tho 😍
lol
Mr Random Reviews lol keep those videos coming man, ..
Mine still unpainted ..
Go with a ducktail spoiler man like 118 on eBay I love mine
I appreciate it man, I’m tackling this for my mach 1 here shortly
nick Hurley I have a video on my channel as well lol a few people asked me to make it and I think you might want to check it out it’s the proper way to do it:) thank you and good luck your gonna love the look!!
I can’t resist it, you actually messed that install up, I’d take it off and redo it you didn’t have to drill no holes I have installed 3 of these and never drilled into the side, do a little bending... and there’s no magic trick to installing a Mach chin on a cobra bumper it’s already pre drilled and ready.... your car has a lot of potential spend a little more time with details and making it clean
More clear coat and wet sand the bumper. Polish and buff
Looks great bro 😎
Wtf you didn't show is the other bumper bro
What about a cobra bumper on the 3.8 v6
Dannymclovin69 it actually should fit, it's the same setup as a GT, the bumper should fit right in place, I'm wanting to do the same thing to mine, and toss a terminator in it too.
What about getting a 4.6
Lol..I can't even watch this cause your damn hand and fingers!!!
the before and after shots arent their but still a good and useful video
sorry man i worked an all nighter last night and i was a bit out of it lol
nah its ok it was still a useful video for people who want to add that bumper to their car
Actually you don’t need any modifications I’ve done this twice I have videos on my channel of both mustangs if you order your cobra bumper from American muscle it comes with new bracket and rivets which are the proper way to do it once the bracket is mounted on the termi bumper you just put it on the fenders and fits like a charm I’d be more thank happy to show anybody how I did it just look at my video for the proof lol thank you!!!:)
Baby 2v and probably doesn’t have a 2 inch gap from the fender to the bumper either .
did u did wet sand paper
This is the bumper cover not the bumper
Very informal just pretty long video though
jmasterlink13 if you’d like you could check mine out lol it’s the proper way to do it:)
Not to knit pic but the fog light you installed in the bumper was not orientated correctly. The right angle of the bulb should be facing down, as well as the screw and spring assembly. The screw and spring assembly is used for aiming the light. The way you installed it will make it impossible to aim and could be dangerous. Again, I’m not trying to knit pic I love the channel keep up the good work.
J Irwin bingo, exactly
Glad I was not the only who noticed lol!
Can I please have the old bumper PLEASE
sold it a while back ago for $70
Mr Random Reviews dam ok
You don’t have to fabricate for this bumper. It does fit. You did this incorrectly.
What are thoooose😂😂😂😂👍
Doesn’t want to tell how to install a Mach chin... wow dude , I’m just gonna stop right there and not even comment on the rest
Hell yeah, stang coming out very nice 👍👍
wow, that was unfortunate. probably could have used duct tape instead.
long ass 10 minute video to have the bumper hanging.
Why does he keep saying new edge mustang!?!?!
anthony munoz 99-04 mustangs are referred to as new edges
anthony munoz - Ever hear of the "fox body" Mustang? Same thing. It's just the style of the Mustang.
Brian M its also still technically an sn95 as well. N ya ur right
Because he does not have much else going on in the video except his hand.
Hey your finger out of the screen!!!
That GT is hideous...smh good luck?
You must be blind to say that that bumper fit “perfectly”... the fender doesn’t line up correctly and the gap is ridiculous man... I hope no poor soul actually listens to you and installs it the way you did
My Dick I’m fucking buying bro! XD
I think it’s just another dude trying to get hella subscribers with the bullshit clickbait on his videos and make money from CZcams. This shitty quality reminds me of garbage mechanics that charge an ass load to work on a car and then screw it up anyways
Lmfao
My Dick i think he rattle canned his rims too lmao
@@benhartson yup. He rattle canned his rims. They look worse now than before he sprayed them. The whole car is sketch. His cars in general are pretty cheap. Police interceptor with a K9 plate says it all. Fronting to the maxxxxx.
First?
That was the worst fitment and paint job I have ever seen .
😂👎