Video není dostupné.
Omlouváme se.
How to clean your Saeco / Gaggia brew unit
Vložit
- čas přidán 19. 08. 2024
- Kody shows you how to properly clean and tune up the brew unit of your Saeco machine.
The brew unit is also interchangeable in Gaggia machines.
Visit our online store to get the parts you need!
EDIT: Note around 4:30 where Kody mentions Saeco part number "NM01004", it is actually NM01044.
Visit our store
www.geniusequi...
:::::::::::::::::::::::::::::::
Follow us on Instagram: / geniuscoffee
Follow us on Facebook: / geniuscoffee
Thank you for watching? Thank you for watching? No sir thank you for posting! This is the most informative thing I've seen of its kind. I didn't know until this video I could remove the Piston without taking it all apart thank you so much
I've only rinsed my brew unit for nearly 10 years now. I performed the steps you outlined here and now it's like I have a brand new machine! I didn't have to replace the screen, but it was gunked up pretty heavily but after a 10 minute soak in some oxyclean made it just like new. I just replaced the pump so I figured I might as well clean the brew unit correctly. Thanks much for the step by step tutorial!
LIFESAVER VIDEO!!!! After several months of poor dripping and most recently no coffee at all and one day after buying a new coffee machine, your vídeo helped me solve the problem, now my saeco minuto is pouring coffee as when it was new. Thank you so much for sharing your knowledge. Everyone should know how to deep clean their machine.
Can't love this comment - nor the video - enough 👌💗😊
This video is a great example of "when the knowledge meets the camera"! Thanks mate! Good work!
Just took my Saeco Magic Comfort out of storage and have spent hours cleaning it and did not touch brew unit. I would not attempt to disassemble brew unit without this video and FOR SURE would have lost that little pearl on the spring had I not known it was there!!! Thanks a lot.
Follow-up. Thought I was stuck at 3:35--getting piston out. Was afraid to force. But got brave and it popped out! Boy am I glad I gave this video!
I bought my Saeco Vienna Plus from Costco over 10 years ago for $350. I pull 3-6 shots per day and it's never had a bit of maintenance except for rinsing the brew group. It runs as good as the day I bought it. After watching this, I think she's due for a tune up.
Great video - thank you for such clear, competent instruction! My Saeco was barely dripping coffee into the cup, saying it has no beans when the hopper was full, and just generally being a pain. I was ready to toss it and buy a new one, until I saw how much they had gone up since I bought mine! There are no service outlets near me, so I started searching for 'how to's' -- so glad I came across yours! I just completed the job, found the gasket was almost eaten through, cleaned and lubed the machine as you direct -- BAM!! Works beautifully! Your video was by far the easiest to follow of all I looked at. THANK YOU!!
Before seeing this video I didn't dare to disassemble my gadget. For me was very instructive and helpful. Thanks a lot.
Thank you for video . Working well now . Was very dirty, would skip brews or empty bean hopper symbol would appear after it would just dump my dry grinds out . Easy to follow .
Excellent video. Very helpful. Just cleaned my brew unit for the first time EVER.
Very nicely done instructional video with great camera work and narration.... When I cleaned the screen, many of the tiny holes were still clogged, so I used an old ultrasonic toothbrush (Philips Sonicare) and made short work of that issue.... Would not have been able to do this without this video!
THANK YOU!!!! Just to add to all the other thank yous here. I was close to buying another machine as no coffee was coming out, but using your video I discovered the shower disc was completely clogged.
Hi David, Thank you so much for the kind words. So glad to hear that we were able to help you out with this video. Cheers!
Thanks for the tutorial. I use it every time I want to "deep scrub" my brew group.
Thanks for a clear and helpful video. Based on this guide, I bought the parts recommended from Genius Coffee Equipment. Small way to thank you putting this on-line. Your prices are real good, but even though international shipping down to the States added to the cost, I wanted to get it from you. Now my 6 year-old Saeco Xelsis Evo is running as good as new.
Thank you so much, I was changing the robber seal and also I fully serviced my Coffe Machine just like you. Everything was perfectly showed and commented.
Regards from 🇵🇱 Poland
Great step by step guide to taking this apart for deep cleanup. Thank you!
Thanks so much, I replaced my pump and then found your video. Best coffee I have had in a long time
Thanks for the video very helpful. Love that almost every thing you need a tutorial on is on CZcams
Great video with clear instructions and the right amount of detail. I soaked my very clogged shower screen in Oxiclean for about an hour and scrubbed it with a stiff brush, rinsed it well and held it up to the light to see if all the holes were clean. I like dark (oily!) beans, likely why it was so clogged. Coffee is coming out of the machine as it should and tastes great again. Thank you so much!
i have used heat up shower method to clean it. all the coffee remains are burned.. seen it somewhere on the internet
Thank you very much for this detailed and clear tutorial, much appreciated.
We are always happy to help!!!
Awesome ! such a detailed explanation. Learned a lot of new stuff from you thanks for that. I never thought about the inner side of the so called shower screen. Philips Saeco still going strong now after this cleaning where I first thought it was broken since the machine is 5 years old.
We are happy to help!
thank GOD I found this and you created this. Oh... and thank you too.
Great video and explanation. Have my machine running like new again and as clean as it was from the factory!! Thanx for sharing!!
Thankyou so much!!! I did it, let's see how the coffee brews tomorrow morning. Thanks once again, keep up the good work.
Thank you so so much! This was a great video all the way through! Thanx bro! good job!
Thanks so much for this helpful video! Especially mentioning the part number of the O ring!
The best complete explanation 👌
THANK YOU! Our Vienna Plus was stuck in a steam mode, with both green lights on....we tried everything, and after watching your video, I fiddled with the piston mechanism on the bottom, unlatched it and re-latched it, and now the machine works great!
i a few hours i will be getting my first full automatic saeco brew machine... i will keep this video in mind.. thank you very much
Coffee came out weak and without foam.
After following this guide to clean it, the first cup was perfect again. Thanks!
We are happy to help you get a great cup of coffee!
Forgot about how my coffee used to taste. This video helped out a lot. Thanks!
Thank you very much for the helpful tutorial! I have used it many times already, the problems have always been solved. I am very grateful to you for that!
Such a great video. Happened today as 90% of the coffee went directly into the dripping tray instead of the cup.
Your video helped a lot! Followed your instructions and I have my coffee back.
Thank you!
I've got an original (pre-Philips) Xsmall Plus SUP033R and this video's given me the understanding and confidence needed to service the brew unit myself. Now I just need to order a few of the parts, and then hopefully the coffee will taste better!
Great to hear this video was helpful for you!
Check out our range of available parts on our site www.geniusequipment.com/
Thank you!! :)
My Saeco HD 8750 gave only drips of coffee. This video instruction was very helpful to fix the issue. Thanks a lot!
I didn't have a problem with mine but thought it was time I gave it a deep cleaning. Wow!!!!! My coffee tastes even better now!!! Many thanks for the excellent tutorial!!
Thanks. Its running smooth again. Saved me soms money. My machine is almost 9 years old.
Thank you. You made my 7 year old machine run like new again. Regards.
Great video,now I can maintain my saeco brew unit, thank you.
Awesome video! After thoroughly cleaning and lubricating the Brew group, the coffee actually tasted better! I guess the years of old coffee gunk trapped in the screen plate filter is affecting the taste.
We are happy to help! :)
Thanks mate! Awesome demo.. my unit was overdue a major clean.. Working like a charm now.
Great video...clear and precise instructions. I’m ready to give my brew unit a deep clean now. Thanks for sharing 👍🏼 🍻
Great video. My Seaco top valve doesn't have the spring + glass ball but something like a needle. I managed to open that valve (twist left to open) and cleaned it out. No more dripping coffee now, finally!
Good to hear!
Thank you for these instructions! Just 1 thing I would do different: no need to change the metal "filter", just put it in some bicarbonate with wine vinegar for some time. Mostly 5/10 minutes will do, if all the holes are closed just leave it in the vinegar for 1 night (or coca-cola).
Hello & thankyou for your tutorial,
I have a Saeco Intelia HD8752 about 11 years old with the following issue:
If the unit hasn’t been used for a few hours or the power plug is unplugged and plugged back in again, upon power-up, the automatic rinse cycle starts as it should:
You can hear the pump groaning, sounds like it is blocked.
This automatic start up rinse is either very slow with little intermittent hot drips taking many minutes for the cycle to complete - which then leads to normal use.
OR
No automatic start up rinse drips and therefore the process fails entering into ‘prime mode’ which also fails & leads to an unusable ‘maintenance spanner symbol’ code 5.
The only way to bypass this is to unplug and re-plug in the power plug, power-up the unit, then as it tries to perform the automatic rinse cycle, manually press the STOP option to bypass the automatic rinse and then the machine can be used as normal & makes great coffee.
Note: The above symptom’s got worse after I performed a de-scale cycle, which failed at the end with of the final rinse / prime - but fully worked up until that final point.
Maybe there is lime scale lodged in one of the following places:
1. Boiler
2. Solenoid valve
3. Steam & water regulator
Note: This is strange because it is 100% possible to run the manual rinse cycle as per the instructions: Press the ‘pre-ground’ coffee button (with no coffee in it), then press the coffee / memo button and it does a big hot rinse no problems at all.
Also, after use, when the unit is powered off, it performs a small rinse cycle with continuous hot running water coming out the dispenser, but only for a very short time.
I have totally re-built the brewing unit per various CZcams demonstrations with new stainless steel plunger screen + plunger o-ring, disassembled & blasted out all the tiny holes in the plastic plunger, made sure all the elbows and holes are clear and clean, installed the valve spring and glass ball correctly, greased all the o-rings, sliders and pivots.
I have also fully taken apart the dispenser locater under the LCD display, disconnected the tube that connects to the brew unit, blasted water + compressed air through it so that it is 100% clear. Fully internally cleaned out the dispenser unit.
I have calibrated the coffee grinding unit.
The other issue I have is that that GREEN does not work on the LCD display - however I can still faintly see the LCD instructions - enough to get by.
I haven’t run the LCD display diagnostics because that is too difficult to see / follow. But it seem like the pump + grinder & heater all work.
I have disconnected & reconnected the LCD & checked the other wires, but can’t see any damage.
Years ago the green would flicker on every now and then, but dead these days..
Very clear and easy to follow. Thanks!
This helped me figure out what was wrong with my Saeco Odea Go. Very nice videos! good job. Thank you
Awesome video, my machine is working flawlessly now, thanks!
Your video saved my coffee machine :) thank you so much!
glad this vid is up my machine is 1 month old and water flow is dripping when i make coffee but flows freely when its just water,, making me think something is making my "shower plate?" clogged
Hi Sveen,
An educated answer without looking at the machine is that the coffee might be too dark and oily, you can try going courser to mitigate the issue. Let us know if that helped! :)
@@geniusequipment thanks i have actually had the same thought i belive i saw a warning on youtube about dark beans ill keep you updated
The Coffe of my intelia maschine was thin and tasted horrible. After your instruction, I found out, that the little glass sphere was scattered. I will replace it and i think this will solve my problem. Thanks a lot !
We are always happy to help! :)
Thank you a lot Mr. the tutorial was really useful.. greets from Ecuador
Thank you Gabriel, we are happy we could help! :)
This is so NICEEEE ! Thank you. I've done it.
Cheers dude, great tutorial, helped a lot.
Great video, thanks for posting. I learned a lot and successfully cleaned the brew cup. I have already shared with a friend who is also using the video to help him.
you are the best, i first time open my saeco and without problems cleaning and lubbing, thank you !!!!
You saved my life. One try, immediate success. Thannnkk you!!!
Fantastische video. Mijn Saeco werkt weer optimaal! Thanks.
Thanks for a great video, the brew unit works like new again. !
Thanks! I'm really enjoying my Odeo Go Plus I bought from you guys recently.
Thanks for sharing this video. Good explanation and good view on the parts.
Thank you, you make it look so easy.
Great instructional video recording this is! Thank you so very much for posting!
Thanks for the film. I build a saeco intelia. Whit a donor machine. The lcd was broken the machine needed 2 days to push the Coffee.. en the glas bal was the missing link. I cleaned it discaled it. En the fine tuning. My saeco is running realy good. Normaly i work whit piston Coffee machines en whit rhea en bianchi en jura en etna Coffee machines. En lots more
Thank you veryyyyyyyy much.
Now i can solve the problem, because of that what you saidin the last part. 👍
Thank you! Great instructions. Great video!
Your video is just perfect! I just did the whole thing and it went perfectly!! Thanks a lot!!
Thank you - great video !!!
This video was very helpful cos it was detailed and explained well. Thanks!
Wow, this is a really great tutorial! Thank's a lot.
Excellent tutorial. Thanks a lot.
I very much appreciate you taking time to post this video! I managed to sort out a leak in the brew group... Sadly, I don't have the small o-rings to do a complete replacement, but I did get the big one on the piston. Now, any advice why the beans might not feed regularly from 1) a full bin, 2) partially filled bin, 3) pushing beans under the clear plastic cover over the grinder. Again, thanks Doug
Excellent video instruction. Thank you!
Thank you so much for all the details that i need!!
your video helps me a lot!!! Thank you man
Amazing - so helpful, thanks!
Best video! Can you please make one on how to change the boiler valve and how much water is acceptable in the drip tray.
Excellent job. Thank you
Thank you, very helpful video
Thanks so much for breaking this down
thumb up i repaired my parents Saeco thank u and Happy Easter ! 😉
Great video. Clearly explained, Easy to watch. Thank you. Do you have a video for accessing and cleaning the dispenser for a Saeco Minuto?
Merci beaucoup ;) . Cela ma permis de faire un bon nettoyage complet de mon groupe , sur ma Saeco Intelia Evo metal . J'ai tendance à mettre trop de graisse .
I think the part number on the o-ring is NM01044 (not NM01004, as in video). Great video thanks!
Awesome tutorial! Thanks!
Just perfect.Thank you!
Very informative video , THANKS ALATTE !
How do you clean the pour spouts on Saeco INTELIA when I make espresso there are black sediments on the bottom of the cup. I noticed coming out from the back of the spouts. So I tried a round toothpick and tried to free any stuck grounds it helped a tiny bit but still leaves sediments. I searched for videos on this but no luck!
58 dislikes wow those are the dummies. thanks well done
Thank you very much for this video! It's interesting to see that almost all of the "user-cleanable" parts just have to be clicked in/out. But! I went through the whole process, I didn't find any broken parts inside, but there's still some water in the used coffie cabinet. Can anyone help me why?
Excellent video, thank you very much!
Thank you, you really helped me with this video :)
Really helpfull!!! Thanks a lot!
Excellent Video !!!
Thank You!
Awesome vid. Although my problem still persists after doing this cleaning. Instead of rinsing out the front spouts when turning the machine off, all the rinsing water comes out the bottom of the grey piston. Any idea what's causing that?
thank you .
Is the tamping block a part that can be replaced? A small plastic part of mine broke, where the screw goes in on the top left corner. Wondering if I can just order a tamping block. Great video, easily detailed parts I never knew I should!
Thank you
nice! very impressed with the dubstep smoke effect intro as well!
I bought the O ring gasket set; the two tiny O rings on the main part of the machine are frayed, I can get them off, but how to get the new ones on; they are the ones that seat into the little funnel like thing that sticks out of the brew unit opposite from the PUSH release.
Great video Thanks for giving me the confidence to try this :-)
That's awesome! We are always happy to help :)