BMW 2002 Floors AGAIN
Vložit
- čas přidán 17. 04. 2024
- Well guys.. Little more floor action over here haha!
Let me know if you want to watch more before I weld the floors in, I don't want to bore you with the repetition!
Thanks for being here and supporting! - Auta a dopravní prostředky
Any key updates on the floor pans will always be cool to see. Maybe an update on you starting your welding next will be good and show us how your first welds go 🙂
That sounds good to me!
It’s all part of it
Great stuff
🎉🎉🎉💪💪💪
I think it's really nice that you're restoring these old cars. Greetings from Germany. :)
Thank you very much!
I Think You Should Film Everything That Way People Understand The Process It’s Not All Fun But The End result Is Very Satisfying Shows You Can Achieve Something If Your Determined Too Put in The Effort. Good Stuff Keep it Up. 👍
Thank you so much, will do!
Don’t feel bad about being afraid of that grinder/wire wheel.
It’s a motherfker of a tool and can do damage. Let your partner do the more tricky areas with it. As there’s a lot of shape edges to catch it on there. And it’s far from second nature to remember which way the wheel spins (so safe) in order to hold it correctly as a starter.
You’ll slowly get more confident with it over time. Glad you decided to only remove the sound deadening you need to.
Because once the carpets are back in. It truly doesn’t matter what the floor looks like. And you can just cover with more deadening which will hide it all anyway.
Also peel and seal roof repair/sealer makes a great cheap alternative to dynomat!
Enjoying the updates Kelly👍🏻👍🏻
Thank you so much!!
@@KellyBuilds please let your fella wire wheel all that floor pan out Kelly. There’s no shame, it’s all so genuinly dangerous for a starter.
Nothing but shape edges on which to get massive kick back.
Learn to get confident on that tool on smooth body work like a bonnet etc.
That’s really REALLY NOT the right area to learn on at all!!!
🙏🏻🙏🏻🙏🏻🙏🏻
I think I’m going to have our apprentice help me tomorrow with it.. definitely safer than me lol !
Love these little cars , always wanted one 🏴😊🏴
They are great little cars!!
Good job 👍 can’t wait to see it finished
Me too!
Good progress in this video. That's a hell of a project to take on for your first restoration but you're gonna gain so many skills and knowledge from that car. I like watching these videos cause I've restored a 2002 so I like to see how others solve these kinds of things. Would like to see how you plan to weld the floors in, overlapping or butt weld. Keep up the good work. Don't be afraid to make mistakes!
Thank you! I for sure am learning a lot already which is cool. I am jealous that you are done with yours haha! And for sure overlapping over here lol. Thanks for the support!
Can't emphasize being careful with the wire wheel. I had one, grab my shirt and keep going up my chest. Mine was a side sliding switch, which once out of my hands stayed on. They can grab an edge and pull out of your hands in the blink of an eye. Don't stretch out with your hands, but stop and change your body position. Air tools are safer but probably not powerful enough, and small compressors can't keep up. You're doing good, but don't injure yourself ❤. Keep that cord clear!!!
Eeeek that’s so scary!!
Nice to see bmw content again, so quickly uploaded to. I’d like to see the new floors welded in. Taking better shape then. It’s the best shape classic bmw car ever. Once completed it’ll be a dream drive. 🇬🇧❤
Trying to stay consistent!! I am so excited for the day it’s driving!
wow! two lucky days in a row. btw, perfect is the enemy of the good.
I want to be more consistent here! I find the community to be the best here on CZcams. And totally agree 🙌🏻 have to keep reminding myself that
You do it very well. Sometimes I feel the same, if the job has not allways success 😢
Mom / girl power .keep it up .I'm going on my video journey this Saturday to pick up the 30 roster on the 32 frame. Wish me luck 😂
Good luck!!
You can do it, it takes time to learn new things
Totally does!
You guys are awesome ❤
😊
I'll be here, I've been through the same process.Nice to see someone else going through the same.It does seem never-ending though.
Great way to put it, it really does seem never ending
That's how you learn how to work on cars by figuring it out yourself and for you to teach people by your mistakes and how you figured out how it's supposed to go
Yes, exactly!
just relax and stop appologising,its simple,clean,trim panells tack in,weld,all of which you are fully capable of,the more you do the easier it gets,good luck❤
Kelly, I think you've got the most adorable car for the most adorable girl, there. Go well, enjoy!! 💜💪
Haha aww!! Thank you!! I do love it!
Hi Kelly you can use Loctite freeze and release spray on the sound deadener and then you hit with a hammer and it will break/chip off. Great work thanks for putting it out there. Good luck.
Thanks for the tip!
Griddy stuff. Let people know how hard it can be. Love the content.
Thank you!
Hey On that sound deadening, try heating it up with a Propane torch. It will get soft and more pliable, then use a scraper to get it off. keep working on it Kelly.
Thank you for the tip!
❤❤❤😮 BMW
Keep us in the nitty gritty…
Deal 🙌🏻
❤😍
Keep plugging away.
Definitely 🙌🏻
As others on y/t keep saying " it's ONLY METAL," if you make a mistake, weld it back up.
I hate making mistakes is the problem 😖
As the song goes " your only human, you're suppose to make mistakes"
NOBODY in this hobby is " prefect", has Travis ever made mistakes, of course he has, so has every honest youtuber.
You're around the same age as my grandchildren, they try not to make them, but as the song goes______________
I watched Bennett's Customs today, and Jorden mentioned Travis and his channel
Air chisels are fun. As me how I know.
Once I got used to it I liked it haha!
@@KellyBuilds They are very useful. Did you have the chisel pop out of the gun yet? Another part of the learning process.
Not yet thankfully 🫣
whe did you not leave them out till finished yesterday
I didn’t take the out! I thought I’d be able to do the passenger side totally then drivers. But didn’t work out that way 😂
That wire wheel looks pretty "innocent" but be very careful with it. It will do a number on you if you get careless. If it hits "edges" it will throw the grinder away from the metal but quite a few inches. If your hand/arm or ??? happens to be there, "OUCH" !!! So, be especially careful around any metal "edges" with the wheel spinning. One direction it will be controllable. The opposite direction will throw/shoot the grinder so "stay focused" and be careful.
It did pull me a couple times!! Freaked me out
@@KellyBuilds It's been awhile since I have used the grinder with the wire wheel on it. I just remembered, that little "handle" that screws onto the side of the grinder body makes it much more controllable when the wheel catches and it wants to shoot off in another direction. That second hand on that handle allows you to hang on with much less "out of control motion". Stay safe !! Even knowing and understanding the danger, sometimes is not enough. ;o(
Look at tool wire wheels only cut at end of the wire thin flat cuts at side end,cup cuts at bottom end it looked like you where pressing on side of flat.
Yeah I didn’t really know what I was doing lol
Please be sure to wait for the angle grinder/ wire wheel to stop spinning before you move with it, k. Show everything all looking good.....
@27:05 You can't turn this into a show-stopper. It's just part of the needed work.👴🤷♂
That repair on the central drive-shaft tunnel looks very dodgy. I would not trust it one bit.👴🤔
Just happily soldier on.👴🤗
I definitely don’t trust it haha! Thank you!!
how is travis doing?
Good! Feeling better 🙌🏻
Give you credit for tackling floor pans. It’s not for the meek 😊
Haha it’s no fun!
Face it Kelly your a goil and goils don't have mechanical minds like us dudes do. 😉😉😅
What seems to be a bad repair could be the sign of a front or back half job?
Did you happen to find it annoying ? No shame in asking for help. Frustration can lead to mistakes.
So annoying! It’s frustrating when I want to just do things but constantly struggle. I wanna just get things done!
There was another person that does floor pans that tack welds handles on his drop in floor pans for easy removal. And the handles are easy to remove. Just a thought. (handles are reusable)
Just take your time. Film as you go, the good parts and bad. We are here to watch not get highlights of what was completed. Maybe save yourself some irritation while getting used to this work and have help step in sooner. We were all at your skill level when we started. Selecting projects is what we would like to hear about. How you determine what to buy and fix. Personally, I am not sure I would be spending time on the BMW when there is a 3 window coupe needing done. Are these customers cars you are fixing ? Sometimes business plans don’t match reality. I have not seen anything fully completed and rolled out the door. Is your business location located in an area easily found and is it visible to future customers. Now if you just build for yourselves it is not a business it is a hobby and hobbies have to be fed money. You two are entertaining and I wish you success but I don’t see production for your business only content for CZcams. Work to get sponsors for cash flow and parts. Enough from me. Thanks for letting us follow as you learn. Have fun and stay safe.
I guess I'll just keep it all in the videos! I get worried people are bored at some point lol. So I am working on the 2002 more because were waiting on subrails for the 32. The 2002 is my project and the 32 is me and Travs! He has a full time sheet metal business here with a pretty long waiting list for him to work on stuff. I was thinking of doing a video explaining what we do here better to get to know us and what we do more!
If being new at fabrication work and not having to do a few things over, I would bet the issues were edited out. What made you get the bmw...I am curious only because it would never have been a choice of mine. I also have no idea what the turnaround value might be. If you are building for yourself, that value means nothing. If the bmw will be a flip then I am shocked there is even a market for this car. Is the three window going to be sold or kept in house ? Both of you are fun to watch and don’t seem to take yourselves too seriously. It would be great to have you explain what you do. What I don’t need is another project will soon drop my order for a factory five cobra kit. Thanks for the comment
Take your time I hope you're getting paid for working on these vehicles? Personally I've had enough I'm looking at 3 to 5 years on CZcams before I make any money why bother? I can easily go out and remodel houses and make cash now
Be careful with the angle grinder.
Definitely. Freaks me out lol
Bake some cookies or something. It’s gonna take you 50x as long to replace those floors as someone who has done it multiple times. Stop whining, take off some or all of that safety chit and getter done.
Odd comment 🤨
Stick with it. I wanna see you finish those pans if it takes you the entire year.
THE GIRL IS BEAUTIFULL. BUT THE DISGUSTING PEPSI ADVERT WAS SO LOUD I MAY BLOCK THIS VIDEO SORRY.
THE PEPSI ADVERT WAS SO BAD I WILL NOT BUY PEPSI AGAIN.
MY COMMENTS ARE MY BELIEF ONLY WITHOUT
PREJUDICE.