Polishing BMW Wheel! BMW E39 540i Parallel spoke
Vložit
- čas přidán 18. 10. 2019
- NEW Video
• ホイール鏡面磨き!ヤフオクでジャンク品扱いの...
tool
・ Paint remover
・ Waterproof paper # 120- # 2000
・ RYOBI Sanda Polisher RSE-1250
・ Sanda polisher (# 120- # 400)
・ DREMEl3000
・ DREMEl flexible shaft
・ Flap wheel # 240
・ Shake Morley (metal polishing liquid
I used a translator ↓↓
Work carefully for a long time.
Gloves and goggles are essential because release agents are very dangerous.
A lot of powder is flying in the sky.
Use a mask.
1. Clean the wheel
2. Use a release agent to remove the transparent surface treatment agent
If you cannot remove it enough, use a stripping agent many times.
4L 2L was used.
3. Wipe off the release agent with a wet cloth.
Wipe off
Wash the wheel with water.
Stripping agents are harmful to the earth.
Do not release as much as possible.
4. Polish all wheels with # 120- # 2000.
All work can be done without machines.
But by preparing the same machine as me
You can save a lot of time.
You need to prepare the next machine.
Strong support for work
・ Ryobi RSE 1250
・ DREMEL 3000
・ DREMEl flexible shaft
・ Flap wheel (# 240- # 400)
If possible, prepare the maximum number of FLAP wheels.
In Japan, up to # 400 is common, but I wanted # 800 or # 1000.
It is difficult to obtain in my country.
5. When the paint is removed, the wheel skin will be displayed.
The skin is very rough.
It must be mirrored.
It is a very hard work.
Work while listening to music and watching movies.
First polish with # 120.
It can be mechanical or manual.
Make it completely flat with # 120
Keep working with # 120, # 240, # 400
120- # 400 is a very important task.
If not enough,
Finally you regret.
After working up to # 2000, I was not satisfied with the results and returned to # 120.
120- # 400 must do the perfect work to not be like me.
It is not recommended to work in a dark place.
Because scratches are very difficult to see.
Prepare an LED light to check for scratches.
The scratches are visible with white light.
It is the same as when checking the scratches on the car body.
6. Use # 600- # 2000 to polish the wheel.
600, # 800 #, # 1000, # 1500, # 2000
It is a very long work.
This work makes the wheel a mirror.
7. Finally, polish the wheel with a metal abrasive.
A metal abrasive called “Shake Morley” was used.
This may not be sold in your country.
But there are similar products.
A metal abrasive containing a coating agent is not recommended because it is difficult to wipe off.
Continue working until it is mirror-finished with a metal abrasive.
If it is not mirrored, you need to go back to # 400 and # 600.
If you get dull or black with a metal abrasive, try a strong metal abrasive before trying a finishing metal abrasive.
“Shake-Morley” is capable of strong polishing and finish polishing.
I hope there is a similar product in your country.
8. Use RYOBI RSE-1250 for deep scratches on the rim.
This machine is a “Random Orbit Thunder”.
Can also be used for car polishing.
Install # 120 on this machine.
Polish deep rim scratches.
Do the same for the entire rim so that the shape of the rim does not change.
Use # 120, # 240, # 400, # 800, # 1500, # 2000.
If you do not have # 800- # 2000, run it manually.
Finally, create a mirror surface using a metal abrasive.
* 9. Finally, there is important advice
In your country
If a cotton buff is on sale, please purchase it.
Attach a cotton buff to the "Random Orbit Thunder" and polish the metal.
Combination of cotton buff and metal abrasive
Make the metal mirror easily.
I recently realized it.
Although not in English, this video is helpful.
Cotton buffs were used after # 400.
The mirror surface can be easily realized.
・ • 鉄のバンパーは磨けば光る?パジェロミニの錆び...
This video is also useful for manual work.
This is the first video I tried to polish the wheels.
I worked without sleeping for days.
You will hear a tired voice at the end of the video.
・ • 中古ホイール磨き!剥離剤と耐水ペーパーとコン...
I wish you success.
Create a similar video again.
Since Japan is winter, the next video will take time.
but, I promise that there will be next. - Auta a dopravní prostředky
New Wheels Polishing Video czcams.com/video/ZvG3DUFrFsc/video.html
Thank for the great video. What was the music called? It was beautiful.
お疲れ様です!
動画編集凄すぎです!感動しました!
みてたら私もやりたくなってきたので挑戦してみます!
ありがとうございました!
美しい映像と音楽で、最後まで見入ってしまいました
ありがとうございます!
そう言っていただけて
頑張って磨いて、
頑張って撮影したかいがあります!
I like how he randomly opend up a bottle of whiskey
Me too....
Thank you!
@@JOHNSNOWROAD besides that, great video and nice work mate, really did a neat job
With a process like that, i would have been drunk already. Super tedious but this man got the skils down
Classy
Detail work has always been a Labor of Love it has a calming effect on the mind not to mention the satisfaction of a job well done, great video👍
That is some serious Mr Miyagi wax on wax off discipline. Nice touch with the Wilde Turkey. EXCELLENT editing and cinematography. Well done.
Thank you very much!
I am good at making videos like this.
I got the next old wheel.
Since Japan is winter, the next movie will take time.
Watch when the video is released.
Extremely impressive video, not just the content but of the editing - lighting - music (& polishing sounds integrated with sanding) and then the finished product. The rims look to be as though they came polished to start with.
Like I started with, very impressive video! Thanks for sharing the details.
Thank you!
I have the following plan.
Next, create a video that many people can understand!
Meticulous and amazing detail! Well done, looking to replicate this on my wheels
The important thing is to work over a long time.
Prepare coffee and move your hand while watching the movie.
No technology is required.
Surely succeed
雪道太郎 what is the product you put ? The Blue gel
いやーこれは、マジ凄いです。自分もDIYで作業しますが、見ていて気の遠くなるような作業ですね。本当に感動しました。これからも頑張って動画上げてください!楽しみにしてます。
Syuu Naka ありがとうございます!
今年は、ホイール磨きはやる予定はないですが、来年あたりまたやります笑笑
北海道は冬になるので、そろそろガレージでの作業がキツイです!
夜はもう外気が5度とかになります。。
今後も感動や情熱を与えられるような動画を作成できるように頑張ります!!
コメントありがとうございました!
Beautiful work with great results! Your E39 looks sweet!
Thank you very much!
e39 is a great car!
物を大事にコツコツと再生する姿勢が素晴らしいと思いますます!
自分も頑張ります!投稿ありがとうございます😊
ありがとうございます!なんでも自分でやってみないと気が済まない人間なもんでww
もうダメだってなったり、まったく知識が無いものに関して人を頼りますけどね!
今後も引き続き頑張ります!
Love this guys workmanship. He is such a perfectionist. My type of guy.
初めまして
映画のような作品ですね
セリフやナレーションも無いのに
見いってしまいました
空気感や音楽もセンスを感じます~
本当に好きな事してるこだわりが
随所に出てました
これからも素敵な映像期待してます。
大変嬉しいコメントありがとうございました!
このようなコメントを頂けることが
クリエイターとしてやっていて一番よかったと思う瞬間でもあります!
今後も良い動画を配信していけるように
クリエイティブな思考を鍛えていこうかと思います!
無言系は自分の得意分野かもしれませんねwww
概要欄で説明をし、映像もかっこいい、しかも広告入れる量も場所も鬱陶しくない。
視聴者から見て上からに思われるかも知れませんが完璧です!
でも一本目のホイールのアットホーム感ある動画も好きです!
ありがとうございます!
視聴者が上か下かなど考えたこともありませんww
画面の向こうには人がいる事を意識して
日々自分が接している方々と同じ気持ちでコメントを読んでお返事しております。
次のホイール動画企画の時はアットホームな感じで作りますね!
今年はもう寒すぎるのでガレージでの作業はギブアップですw
動画には無いですがストーブを使いながらガレージで作業してました!
That’s some time invested good job man!!
Since it took a lot of time, the wheel became a mirror!
Ich liebe solche Arbeiten. Sehr gute Arbeit 🤘🇩🇪
Vielen Dank
Ich habe bereits folgenden Plan!
素晴らしい根性ですね!!出来上がりの瞬間ニヤついちゃいました!
ありがとうございます!
自分もエンブレム付けて出来上がった瞬間に
ニヤけました!
So nice to see no lacquer! Much easier to maintain as long as you clean regularly and polish now and then!
Awesome detail, but the video does not capture the hours and hours and hours of finger breaking work. Kudos from the uk.
Thank you very much!
Exactly!
Maintenance is easy!
Because there is no lacquer, it has a wonderful gloss!
Did this to some old Rays. Took me about 3 weeks to polish the lips. Your wheels came out really nice.
It is a very time consuming work!
But worth the time!
No shortcuts. Just hard work. Love the video production as well. Keep it up!
Thank you very much!
I got the next old wheel.
Since Japan is winter, the next movie will take time.
Watch when the video is released.
Привет, очень хорошо!
Я как вспомню когда диски под покраску готовишь, пальцы ахреневают.
Надо много терпенья , чтобы так отполировать.
Респект вам !
Покури гашиша или сильной марихуаны, и сам не заметишь, как повторно торкнет в конце работы, глядя на результат,
да и пальцы болеть не будут. Много раз наблюдал наших препов под покраску - за 3-4 часа работы несколько косяков
пыхали, и это еще до легализации этой дребедени в Канаде.
А кто то сейчас посмотрит и подумает о фигня я тоже сейчас так сделаю😄
Потом приносят на полировку убитые диски и говорят что так дорого
Under tools, you forgot to mention Wild Turkey 🤣
Wild Turkey is an important fuel!
動画の編集も作業も仕上がりも、プロですね‼️
ワイルドターキーのむ所とか✨めちゃくちゃかっこいいんです
The Turkey says everything!!!!!👍👍👍👍 Very good work, respect from Roumania mann!!
Thank you!
I prepared the following wheels!
Beautiful music! Beautiful car, amazing job !!!! Respect !
凄い!とても地道な作業ですね。自分にはとても真似出来ません。脱帽です。
投稿待ってたぜ!!
ありがとうございます!
やってやりました!
めっちゃ疲れましたww
Love the vibe of your video, super chill and relaxing!
Lover your e39 too, keep up the good work!
Greeting from Australia~
動画も、車も、凄くいいと思います!
チャンネル登録をしました!
Thank you!
I have the following plan!
Watch when the wheel video is released!
動画もホイールもカッコよく仕上げましたね(^^) ご苦労様でした!!!!!
ありがとうございます!今回はいつもと違ったテイストに仕上げてみました!
ホイールもピカピカになり、全てにおいて満足いく仕上がりです!
why i saw this on recommended idk but you've really really perfect effords bro, congrats.. and this e39 looks amazing.
Thank you!
Next up is a more amazing wheel!
圧巻です!素晴らしい!
ありがとうございます!
今時あまり聞かない気合いと根性で
やりきりました笑笑
Just done one of my M parallel wheels and as you see in the video the preparation is the most important. Sanding in stages will get you the mirror finish. I've also used buffing wheels with compounds and that saves loads of time and adds loads of shine too!!!
Takes a lot of time but in the end they look amazing good job bro an like that wild turkey break too!!!😉
Amazing work man,great video and wonderfull music !!!! Greetings from Greece.
The fine job and the very nice video editing 👍🏼
Thank you very much!
I will do this hard work again.
The other day, an old wheel was shipped to me.
Japan is winter.
Time is needed until the next wheel video.
Please check at the time of release!
That's a serious amount of work to do by hand ! .....you made an absolutely beautiful job of it 👏
Thank you!
It makes sense to try it yourself!
凄い根気です!お疲れ様でした〜
ありがとうございます!
かなり頑張りました笑
ホイール磨きはまた来年です笑
I wetsanded down through clearcoat and polished a lip on a wheel.
It took quite some effort. That was nothing compared to this. This is so impressive!
A lot of work but the result is awesome. Great!
Thank you!
It was very hard work, but I was satisfied with the results!
お疲れ様!!
カッコイイテイスト動画!
いつもの喋りで副音声verも欲しいとこ
ありがとうございます!
今回は雪道太郎ではなく
クリエイターとしてTAKKU FILMSテイストで映像を作ってみました!
副音声の機能があったら解説をつけてみても良いかもしれませんね!
Damn, those looks nice! Good work!
Good job!!
It was all worth it, that e39 looks beautiful
Thank you!
e39 is a beautiful car
I'm no fan of BMW, but this guy, man, I swear. Made me sub. Great to watch!
You guys from Japan have some kind of born sense of taste and accuracy that no other nation will ever have. Great job
ja_i_gruzy Bosnian people are the same, investigate this: making of sargija
Thank you very much!
I have many friends who do the same thing as me.
I think Japanese people are good at this kind of work.
When I saw your video, I quit watching my favorite film. it's looks like 1000000 dollars! Greetings from Poland :)
So satisfying to watch this.. what an art
Thank you!
I will create another video like this.
The old wheel was shipped to me the other day.
Time is required until the next wheel video.
Please see when released!
Yeah, greatings form Poland since the title is... Polish ;-)
Wow! Incredible video.. great work!
美しい。根気のいる作業で恐れ入ります。
VERY well done. Those look fantastic
I like how you use wild Turkey in the process. That's a great idea to try 👍
and hash or strong marijuana before wild Turkey
good editing well done.
所作がかっこいい きれい
落ち着きます
作業が道具が渋い いいですね〜
Incredible! I want to do the same to my BMW 330i but I don't have the patience. Is there a machine process that I can use to speed up the process?
Nice work
お疲れ様でした。
ディスカバリーchannelを見てるかのような感じ。
画像にすると美しいですが
ここに来るまでの苦労は御察し致します。
素晴らしい出来映えです。
お疲れ様でした。
ディスカバリーチャンネルとまで言っていただけるとは
カメラマンとしてクリエイターとして大変嬉しいお言葉です!
とにかく日々技術向上を目指して車の撮影を行っていますので
今回はそちらの技術を取り入れましていつもと違うテイストにて仕上げてみました!
素晴らしいお褒めのお言葉を頂けただけでも疲れが吹っ飛びます!
ありがとうございました!
また磨いてる!
もう、本職になっているのでは(笑)
いやいや!本職とするならば
ブラスト研磨機とバレル研磨機が欲しいところです笑笑
もうソレ買ったら開業できますね笑
クリア塗装は外注すれば完璧です笑笑
This man got style with the whiskey.
That’s a lot of work man. Good job
Thank you!
Check this out too!
czcams.com/video/ZvG3DUFrFsc/video.html
some of the best looking wheels
Next, we aim for higher quality!
Bravo it was very difficult...very very nice
Very cool result bro!
Thank you!
I have the following plan!
Nice job with the M Parallel wheels. I like the way you edit your videos. Thank you
Thank you for your reply!
Thank you very much!
Next time I will paint this wheel!
@@JOHNSNOWROAD Hi
I have E38 740i with M Parallel wheels too. I sand blasted mine and then primed and sprayed in the color of the car (Titansilber). I had to apply several coats of ETCH primer, 4-5 coats of base coat, then 4 coats of clear laquer and at the end I put the M badges and sprayed the final coat of laquer on the top. The reason I did this as it rains a lot in Ireland and if I didn't protect the metal it will oxidate and corrode again after less than a year. ありがとうございました
@@TheKeenMechanic I saw that video!
So great work
!!
At Japanese car events, some people don't clear paint on the wheels.
The reason is that the wheels lose their shine.
The most shining thing is that there is no clearness.
But that's not practical!
@@JOHNSNOWROAD I understand. You have to choose whether you want the best effect and shine and practicality. I completely agree. Thanks for your comment
Can you do more videos of rims love your work man!!!!
I am very happy to have feedback from abroad!
I need time, but I'm planning to create a lot of these videos!
Thank you!
ia a very, very goob job. congratulations, my respect.
これは渋カッコイイです!
ありがとうございます!
やっぱり何だかんだ純正って良いな!って思いました!
すごい手間ですねでも美しい!質問これ削ったあとコーティングしない状態なんでしょうか?アルミのサビとかでないんですかね!
結構自分で簡易修理したりするので気になります!!
How much passion ,
Love the video !
Awesome work, car looks good!
Thank you!
Check this out too!
czcams.com/video/ZvG3DUFrFsc/video.html
今回の動画はなかなか演出に凝りましたね、買った方が早いのはわかっているけど、やってしまうのですね、旧い車でも、いや、だからこそオシャレをさせてやりたいですからね。
もともとはこういったテイストの動画の方が得意なので
今回は言葉を発しない感じで制作してみました
もし、言葉を発するバージョンを作ったならば
前回よりもボロボロな私が見れたかもしれませんwww
買ったとしてもフルで磨きの入ったMパラホイールは存在しないので
プライスレスなホイールになりました!
だいぶオシャレな車になったと思います!
Schöne Grüße aus Germany✌🏻 Dein BMW ist sooo Cool 😎 ein Prachtstück. Schön zu sehen das er gepflegt und immer noch fährt.
Vielen Dank. Ich installiere derzeit eine Luftfederung.
Wir planen, dass ein japanischer Handwerker einen Schalldämpfer herstellt!
Dieses Auto ist wirklich unglaublich!
That ONE wheel would’ve taken hours upon hours of work. Then I thought how you’d have to do it 3 more times for a full set. I think this would take a normal person a full 40 hour work week. Maybe more. But it looks great!
shoulda sprayed them with ceramic coating after...
love the car.. enjoy the wheels.
Good job on editing and the actual work you put into those wheels. What is the name of your soundtrack? Really like it.
Good video, excellent music, thank you very much.
The sombre soundtrack sums how I feel about kerbing 4 of my diamond cut wheels 😰 very expensive to fix every few months.
wow 😲 wish to have this rims on my bimmer. greetings from germany 😃
Get this wheel!
And polish like me!
ハンドポリッシュ!お見事です!
ありがとうございます!
動画にするのは2度目ですが
毎度のことながら大変でした笑
今年はもうやりません笑
自分のリバレル動画とはクオリティが違い過ぎて脱帽です
超まじめにコメントしますと
内容だけみればリバレルの方がクオリティは高いですよw
自分の場合は気合と根性さえあれば、だれでもできるただの磨きです!
リバレルにトライするなんてホントスゴイと思います!!!!
Great work - just sounded like a somber funeral service lol
The patience of this man to sit there and scrape all that paint off after the paint stripper...
Beautiful work and nice car greetings from Germany
Thank you!
I will create another video like this.
The old wheel has now been shipped to me.
However, since Japan is winter, it takes time to video the next wheel.
Please check it out when it is released.
Wheels look Awesome, car looks even better
I realized that wheels are important for cars!
Good job man! I know the process it takes plenty plenty time 👌
Thank you very much!
I will do this hard work again.
The other day, an old wheel was shipped to me.
Japan is winter.
Time is needed until the next wheel video.
Please check at the time of release!
@@JOHNSNOWROAD absolutely will stay tuned🤙
Wow well done , I have the same wheels on my e39 530d , do you have to strip the wheel before you cab polish them up , mine do not have the cerb rash your wheels had they only have minor defects , great video much love from Scotland
Is the paint remover safe for aluminum wheels? or is there a special material for aluminum? because I want to clean the paint on my alloy wheels that are already dull and want to change the color but I hesitate to use a paint remover for aluminum because I've heard that after being used in aluminum, the alloy hit the hole and cracked immediately.
"ありがとう"
Amazing Work ! ! !
Thank you!
I will create another video like this.
The old wheel has now been shipped to me.
However, since Japan is winter, it takes time to video the next wheel.
Please check it out when it is released.
T氏から噂でお聞きしてましたが、ここまでやられるとは凄いですね^ ^
素晴らしいです👍
ありがとうございます!
Tさんにも、Nさんにもいつも大変お世話になっております!
業者に出したほうが人件費考えたら安い!っと鋭いツッコミを頂きましたwwww
シリアスな磨き最高です。
冬のFR・・・案外走れちゃうってのは無しの方向で(笑)
koro _korosuke ありがとうございます!
今回はカッコつけて作ってみました笑
あの車庫から出して戻れなくなるのが怖いです笑
They look beautiful. Have you seen the 3 piece set someone made with the centers of a set of these?
How did you handle the deep scratches and fixed them???
May be a video to learn this?
Great work!
Please watch this video from 13:00
czcams.com/video/ZvG3DUFrFsc/video.html
May be useful for your question.
I think it is important not to pursue deeply.
I didn't lose the balance of the wheels.
Last but not least, I am an amateur!
I'm glad if you can use it as a reference!
Thank you!
これみて純正アルミを光らせるの良いなと思いました!
挑戦してみようと思います!
長い時間を用意して
なるべく妥協することなく作業してみてくださいね!
#120~#400が非常に重要な作業です!
Great job!, I would buy such an e39 without thinking over, especially with such wheels rather then a new car (y)
動画の撮影、編集がプロ!
This was awesome!! Attention to detail and editing! Excellent job. Was curious on how long this took?
This work took two weeks!
E39めちゃめちゃ渋かっこいいですね!
ありがとうございます!
だいぶ年数も経過して
シブいという言葉が合うようになってきましたよね!
Nice job!
Amazing work!
Thank you very much!
Best looking OEM wheels for e39
A Japanese friend told me the same thing.
He said, this wheel may be an OEM.
I will investigate.
Great Job......(*Claps appreciatively in the background*)
God is in the detail.
Music makes it more interesting.. intimacy..
Love from Indonesia 😘
To my fellow automotive lovers
Thank you!
Next, we will make a better selection!
my all time favorite wheels