Sat 7-10 years... Will it run again? Ebay Store Link: stores.ebay.com... T-Shirt Link: www.ebay.com/i... New Design www.ebay.com/i... Instagram Link: / frostcycleshack
I just fired up my 76 xlch after it sat in my shed for the last 10 yrs about a month ago. Only took about 5 kicks and it came to life! What a sweet sound they make!
Sounds good! I had a 1980 Sportster, sat 2 years , when I went overseas 2 years. Changed the Battery, cleaned the Mikuni carb. It fired right up! Good job on this!
had a 79 sportster years ago. kind of a bastard year. master cylinder in the way of rear pipe.mine was a rat . when i tore it down for top end rebuild, had a 60 over piston in front and a 30 over in the rear. got it running pretty good. went to a 60 pan after it. shovel top end. ah the good old days! getting older now. cant get rid of the harley bug. keeps me up at night. just finished a UL build. only cause i never had a flathead. good luck on your projects and ride safe
Hey Dave, yeah the 79 has a few quirks to them that are alittle different. I've seen all kinds of funky stuff over the years. I mainly stick with Ironheads and Shovelheads but have a buddy with a flathead that's given me an itch for one of those too. Thanks for watching buddy and I appreciate your comment!
I ride a 73 Sporter it is a friend bike but he doesn't ride now Ben standing in shad for 20 yrs I put it back on the road and ride the shit out of it love it
Hey thanks buddy I'm stoked about it. I run into all kinds of characters and sticky situations dealing with these old bikes, always keeps it interesting! Thanks for watching!
Great video! I am an Aussie and have a 1984 ironhead, beautiful old girl, I've had her many years and before a bad illness would ride with my mates from here to Broken hill, that;s 900 km through the Australian outback. loved tp hear her start.
l_t_d not sure if I will even get a response but here goes I just got handed down a 1975 Harley Davidson Ironhead unfortunately it has been sitting for about five years I've ridden many motorcycles but never owned a Harley what should I do for tune ups first on it last it was turned over was 2011
drain the gas if any out,flush it as best you can,put some fresh good gas in it see if it has sparkum! -oh,and check the oil out,probably needs changed,wouldn't hurt to check out the trans and primary oil too
Realy enjoyed it, my first harley was bought in 1984 it was a gray 1979 xlch I sure liked that bike still riding today and have had many different harleys I have enjoyed all of them but that first one will always be among the favorites
Thanks for putting this out Current project, 1977 sportster slow crank, cracked start solenoid, hoping that the slow crank is being caused by the solenoid. Wrench on.
I had a79 in 80 - it's the bastard year - almost no aftermarket parts fit. The battery is too small, and the electrinic regulator sucked too. After fixing those things, it did work ok, but the 57 - 78 frames were better. If you bought it right, you'll have fun on it but thefy are hard to sell. Have fun !
Yeah they've had that reputation, the 1 year sprocket cover and brake linkage is the big quirk. With the 80 cover and linkage it gives you alittle more flexibility. I agree there's a lot more 57-78 stuff for sure and typically what I look for in bikes. I still own this bike and a few more 79's since, I've kinda got soft spot for all Ironheads unfortunately, lol. Thanks for watching!
Hope the hater was the first to see this light off. Can't begin to grasp where these people come off with this business. Great job getting her to light off and idle. Really thrilled for your success. Made my night.
Nice! I love the 79' Model Harleys. I had a Shovelhead Harley and never had a problem with it. People like to bad mouth them,But this shows they are strong engines.
I have a 81 buried in my parents basement. Was my first street bike. Lot of fun. Learned alot, and made a bunch of noise.... 3rd gear rolling down a big hill in the city engine braking was awesome..
Ive done bikes all my life and have found that pieces about as big as a half dollar of a busted up grind stone work well in cleaning tanks.(also self tapping screws or lock washers will suffice)Sounds great!
Wow for not running and sitting that long that sucker sounds awesome, I’m looking to get rid of my Victory Vegas and get an older Harley just because I love the way they run and everything, working on The Vegas at the moment but yeah
Well the price was right and kinda thought to good to be true, then when he started jabbing I did start to wonder about it. The owner seemed like an honest guy so just hoped for the best and so far so good!
Ironheads catch a lot of hate, but I've always liked them. My father in law inherited an 83 Ironhead from a friend that passed about 10 years ago. His widow actually let it sit for about 8 years before she gave it to him. That bike has seen a lot if miles.
Nice Job, she's a beauty. I recently bought a 79 Roadster I've reading and cruising the internet for info. In my searching I discovered that 2 front disc brakes are only on the 79 Roadster, not Sportster. There's other differences also, 2 inch longer front fork, no kick start option and a few other things I can't remember, so congrat's, you have a rarer bird than you thought. Been doing some stuff on mine and wouldn't mind comparing notes in the future.
I had a 75 xlh iron head for 20 years. best bike I ever owned. Times got tough I sold it for $1500 IT was bored 20 over and head shaved .10. S&S super B carb and stripped down to nothing but a head and tail light. Never let me down . Wouldnt charge the battery so I carried a charger with me. Drove her home with only 1st gear for 50 miles at night. Felt like I was sitting on a volcano.
If it had a rod knock in the motor , then why did the other guy want it so bad...😅 Sounds good my friend. I have a 75 iron head sportster 1000. Has starter problems and the points need to be set and static timing done. She should fire right and run.
yea many times guys like that [ I know a few]don't stay sober long enough ..m any never have the money to get the dream barn find toys like a old sporty.. great video
i have a bone stock 79 sportster kick and electric with original simese exhaust.it even has the original goodyear a/t tires.great bike you have there.thanks for shering
I really appreciate you watching and glad to hear I've got some long time followers. Trying to get back into uploading more and it feels good, thanks for watching!
I don't know who got more excited you were me about that motorcycle starting. Sounds good so far brother. Won't be able to make it to the hill climbs I got family coming in do you enjoy yourself. Talk to you soon.
Yeah it's always exciting to fire them up for the first time, especially when it's that easy and so far so good! I kept an eye out for you at the hillclimbs, had a good time and got a pretty wild wreck I uploaded. Thanks for watching and we'll get together sometime!
I'll tell you what I think, I think it's awesome! I have an '01 solid mount evo sportster and it's great, but I would love to find an old ironhead like you have there! It looks like it will clean up real nice, too. I'm sure you'll have a blast with it, I know I would. Great find!
Looks like a mostly unmolested stock bike. Nice to find them like that. Ironheads seem to suffer a lot of abuse from ham fisted mechanics. I love my old '74 XLH. Good work getting her going.
@@jfrost77hd Yeah I've seen a few ways like diesel fuel and a handful of bolts and shake the hell out of it. Like you said a piece of chain. A pressure washer you got to be careful with that though certainly wouldn't want to blow a hole in the tank and then dry it out. A few shot's of methyl hydrate work. Stock Rock's
That's excellent man I will have to wait till next month I have just spent a bunch of my money and have to wait for funds to come back in but I have a nice little list going thanks for any help I appreciate it I will keep in contact and you keep pumping out those awesome videos Man👍
To treat a gas tank, remove the tank and pour a quarter to half a cup of engine oil in the tank,and swish it around,do that at the end of every riding season,and rust will never be a problem.later.
Had one just like it in 1984. Mine was xlch, but I added the electric start. I did like the new style kicker lever. I started with a totalled out bike went through the whole thing. I
Micheal Antisdel Very cool, yeah 79 was the last year for the XLCH. I've added starters to them and kickers to the XLH aswell, its nice to have both for sure. Thanks for watching!
I paced around the garage for a few before hand, it's one of them "well this is either going to be good or possibly really expensive" kinda moments. There's always surprises but so far so good, thanks for watching!
I like this statement, funny but true, "possibly really expensive". But sounds like you did all the right pre-start stuff on an unknown bike and were ready to kill the starter solenoid. I wouldn't have thought of this one. Great vids. Keep em coming.
Jack Price Figures since I emphasized the solenoid sticking figures it wouldn't happen, but it's one of those things that you only need to happen once to remember. I've seen it more times then not with something sitting this long so was ready. Thanks for watching!
Just found this video, watched alot of your others. Good stuff man! Heard you say you are just north of Dayton, I'm in Middletown. Would love to see the stuff you have and pick your brain about my 1988 XLH! If you dont mind, join "Ohio Sportsters" on FB. Small group of us all thirsty for your knowledge! Great looking bike by the way! Take care
Hey thanks Mike, yes I'm just north of Dayton but about to move an hour further north. I really only mess with 85-earlier bikes so not much help on your 88 unfortunately. I don't do FB either but sure a great group of you there. I appreciate you watching the videos 👍
Always cool to hear a Harley start and run, your bike is no exception, sounded great
I just fired up my 76 xlch after it sat in my shed for the last 10 yrs about a month ago. Only took about 5 kicks and it came to life! What a sweet sound they make!
Sounds good! I had a 1980 Sportster, sat 2 years , when I went overseas 2 years. Changed the Battery, cleaned the Mikuni carb. It fired right up! Good job on this!
had a 79 sportster years ago. kind of a bastard year. master cylinder in the way of rear pipe.mine was a rat . when i tore it down for top end rebuild, had a 60 over piston in front and a 30 over in the rear. got it running pretty good. went to a 60 pan after it. shovel top end. ah the good old days! getting older now. cant get rid of the harley bug. keeps me up at night. just finished a UL build. only cause i never had a flathead. good luck on your projects and ride safe
Hey Dave, yeah the 79 has a few quirks to them that are alittle different. I've seen all kinds of funky stuff over the years. I mainly stick with Ironheads and Shovelheads but have a buddy with a flathead that's given me an itch for one of those too. Thanks for watching buddy and I appreciate your comment!
Just wanted to let you know I appreciate your attitude so much I just bought one of your shirts. Very cool looking, I’m a Shovelhead nut anyway.
Hey thanks Rusty, I really appreciate the kind words, business and support! It's headed your way, thanks for watching aswell! 👍
Amf built some beautiful bikes around this time,the late seventies, I know because I helped style that 1979 xlh hugger sportster.
Awesome. But, it's an XLS.
?
Great video and this mechanic of 30 years is impressed with this garage mechanic.Cool as shit.
Hey Ted thanks I appreciate that! I really do enjoy wrenching and bringing these old bikes back to life, thanks for watching!
I ride a 73 Sporter it is a friend bike but he doesn't ride now Ben standing in shad for 20 yrs I put it back on the road and ride the shit out of it love it
I always liked the video when there's a good starting.. to the ending 👍👍
Sweet sounds man! Glad this one worked out for you with all the negativity thrown your way from that other guy. Sounds awesome!!
Hey thanks buddy I'm stoked about it. I run into all kinds of characters and sticky situations dealing with these old bikes, always keeps it interesting! Thanks for watching!
I’m buying an 80% complete 1980 ironhead bobber project this Saturday. I’ll probably be watching a lot of your videos. I’m pumped!
Great video I like seeing the old iron come back to life
Great video! I am an Aussie and have a 1984 ironhead, beautiful old girl, I've had her many years and before a bad illness would ride with my mates from here to Broken hill, that;s 900 km through the Australian outback. loved tp hear her start.
Wow that sounds really good... Thumptey Thump Thump...Old School
Drive it buy that guys house now 5 or 6 times....lol
Make sure that place is always on the way to where you go 😎
l_t_d not sure if I will even get a response but here goes I just got handed down a 1975 Harley Davidson Ironhead unfortunately it has been sitting for about five years I've ridden many motorcycles but never owned a Harley what should I do for tune ups first on it last it was turned over was 2011
drain the gas if any out,flush it as best you can,put some fresh good gas in it see if it has sparkum! -oh,and check the oil out,probably needs changed,wouldn't hurt to check out the trans and primary oil too
5 or 6 times.....a day.....
Hell yes..lmao
Realy enjoyed it, my first harley was bought in 1984 it was a gray 1979 xlch I sure liked that bike still riding today and have had many different harleys I have enjoyed all of them but that first one will always be among the favorites
Welcome to the'79 Only ' club- I rode one for 16 yrs, definitely a learning experience,lots of odd stuff on those
Thanks for putting this out
Current project, 1977 sportster slow crank, cracked start solenoid, hoping that the slow crank is being caused by the solenoid.
Wrench on.
I had a79 in 80 - it's the bastard year - almost no aftermarket parts fit. The battery is too small, and the electrinic regulator sucked too. After fixing those things, it did work ok, but the 57 - 78 frames were better. If you bought it right, you'll have fun on it but thefy are hard to sell. Have fun !
Yeah they've had that reputation, the 1 year sprocket cover and brake linkage is the big quirk. With the 80 cover and linkage it gives you alittle more flexibility. I agree there's a lot more 57-78 stuff for sure and typically what I look for in bikes. I still own this bike and a few more 79's since, I've kinda got soft spot for all Ironheads unfortunately, lol. Thanks for watching!
Hope the hater was the first to see this light off. Can't begin to grasp where these people come off with this business. Great job getting her to light off and idle. Really thrilled for your success. Made my night.
That sounds like something I'd say if I was pissed off. LOL.
My 2nd Sled growing up..........83 Ironhead. Roadster 1000cc.....Loved that Bike......
Nice! I love the 79' Model Harleys.
I had a Shovelhead Harley and never had a problem with it. People like to bad mouth them,But this shows they are strong engines.
Beautiful bike,those bikes were rolling works of art!
I love me a Ironhead. They make a great race bike.
Sounds awesome and those Sporters ran great back then.I remember the bike being heavy.
love it when the good guy's win screw him brother his loss.
I have a 81 buried in my parents basement. Was my first street bike. Lot of fun. Learned alot, and made a bunch of noise.... 3rd gear rolling down a big hill in the city engine braking was awesome..
As a 25 year Harley tech, I can tell when the guy I'm listening to knows his shit. This guy does. Good job.
sounds great ! the guy with the attitude was trying to scare you off!
sounds great brother you did well.
Ive done bikes all my life and have found that pieces about as big as a half dollar of a busted up grind stone work well in cleaning tanks.(also self tapping screws or lock washers will suffice)Sounds great!
Hey John thanks for the tip! I've used a few different things over the years aswell. Thanks for the comment and I appreciate you watching!
love your videos and knowledge on these old school bikes . My '72 XLH 1000 has benefitted quite a bit from watching your stuff .
Joe Campbell Hey Joe, glad you enjoy the videos and happy to hear your keeping another Ironhead running. Thanks for watching!
Very cool! Love to hear that old iron fire.
Good luck with that sweet old iron head.
Wow for not running and sitting that long that sucker sounds awesome, I’m looking to get rid of my Victory Vegas and get an older Harley just because I love the way they run and everything, working on The Vegas at the moment but yeah
Wow, ur bike sounds awesome! Lucky u.
Yeah that guys friend was full of shit. If it had rod knock why was he so butt hurt about trying to buy it.
Well the price was right and kinda thought to good to be true, then when he started jabbing I did start to wonder about it. The owner seemed like an honest guy so just hoped for the best and so far so good!
AWESOME FIND!!!!! H.D. FOREVER!!!!
NICE FIND❗Engine sounds beautiful💙
Thanks, I really enjoyed your video
Ironheads catch a lot of hate, but I've always liked them. My father in law inherited an 83 Ironhead from a friend that passed about 10 years ago. His widow actually let it sit for about 8 years before she gave it to him. That bike has seen a lot if miles.
Yea!!!!!! Sounded awesome !!! Excellent work brother
Great job mate ! Hope she runs well for ya.
Nice Job, she's a beauty. I recently bought a 79 Roadster I've reading and cruising the internet for info. In my searching I discovered that 2 front disc brakes are only on the 79 Roadster, not Sportster. There's other differences also, 2 inch longer front fork, no kick start option and a few other things I can't remember, so congrat's, you have a rarer bird than you thought. Been doing some stuff on mine and wouldn't mind comparing notes in the future.
I had a 75 xlh iron head for 20 years. best bike I ever owned. Times got tough I sold it for $1500 IT was bored 20 over and head shaved .10. S&S super B carb and stripped down to nothing but a head and tail light. Never let me down . Wouldnt charge the battery so I carried a charger with me. Drove her home with only 1st gear for 50 miles at night. Felt like I was sitting on a volcano.
That gonna make a fine bike.
If it had a rod knock in the motor , then why did the other guy want it so bad...😅 Sounds good my friend. I have a 75 iron head sportster 1000. Has starter problems and the points need to be set and static timing done. She should fire right and run.
That is a good looking bike.
awesome man!! the felling is great! hahaha very happy or something.. love it, congrats
Well done man! Enjoyed watching you "breathe" new life into that baby! Enjoy!
Sounded good! I use to have a 1980 Sportster.
That guy was just a sore loser, the iron head sounds great.
Hey Curt, yeah that guy was something alright! Good seeing you at the hillclimbs and hope you like the shirt!
Sure do, thanks again man.
yea many times guys like that [ I know a few]don't stay sober long enough ..m
any never have the money to get the dream barn find toys like a old sporty.. great video
there's a lot of B S going around, you did good, just keep going
love it! I'm going to look at a 82 tomorrow!
Cool, I may have just scooped a ‘78
i have a bone stock 79 sportster kick and electric with original simese exhaust.it even has the original goodyear a/t tires.great bike you have there.thanks for shering
Frost man,we are grateful for all your vids...Bailed me out a few times!!!!Thank you
Mazz man Hey thanks man, glad they've been helpful and really appreciate you watching!
Good job!
Sounds good 👍 keep er between the mustard and mayo and rubber side down later GBU
I got a 79 as well sweet bike man!
Awesome bike, rad sound. great content man 👍
Jo, if you want to get all the rust out of the gastank, try to puting coke in there and let it sit for a day
I've really been enjoying the videos! I hope you keep making them and not take a super long break again
I really appreciate you watching and glad to hear I've got some long time followers. Trying to get back into uploading more and it feels good, thanks for watching!
I don't know who got more excited you were me about that motorcycle starting. Sounds good so far brother. Won't be able to make it to the hill climbs I got family coming in do you enjoy yourself. Talk to you soon.
Yeah it's always exciting to fire them up for the first time, especially when it's that easy and so far so good!
I kept an eye out for you at the hillclimbs, had a good time and got a pretty wild wreck I uploaded. Thanks for watching and we'll get together sometime!
Looks clean man. And Sounds awesome 👍
Yeah I like it being fairly original and not riddled with peoples bad ideas, usually easier to work on that way. Thanks for watching!
Beautiful bike!
Great little Sporty
That's really nice. Hated that rear pipe on the 79's though. 80&^ cover and brake lines solve everything.
Sweet barn find brother!!!!
Hey thanks and thanks for watching, so far so good!
good deal i love the sporty`s
Awesome man! Can't wait to get mine running.
It's always a good feeling, hope you get it fired up soon! Thanks for watching!
I'll tell you what I think, I think it's awesome! I have an '01 solid mount evo sportster and it's great, but I would love to find an old ironhead like you have there! It looks like it will clean up real nice, too. I'm sure you'll have a blast with it, I know I would. Great find!
You need more vids, brother! Folks like you are what we want to watch. :)
Derek Odom Hey I appreciate that Derek, got a 74 I plan to make a video of here soon. Thanks for watching!
you're a down to earth guy J, nice score (Y)
Hey thanks I appreciate that and thanks for watching!
Looks like a mostly unmolested stock bike. Nice to find them like that. Ironheads seem to suffer a lot of abuse from ham fisted mechanics. I love my old '74 XLH. Good work getting her going.
That’s a good honest looking motorcycle and sounds awesome, good find my friend!!! 😎
Nice job, nice bike.
I wonder if CLR would work in the gas tank to get rid of the rust? Awesome when an old bike fires right up.And runs..
Possibly, I've never tried it. I've done a few other methods with white vinegar or evaporust and had good results though. Thanks for watching!
@@jfrost77hd Yeah I've seen a few ways like diesel fuel and a handful of bolts and shake the hell out of it. Like you said a piece of chain. A pressure washer you got to be careful with that though certainly wouldn't want to blow a hole in the tank and then dry it out. A few shot's of methyl hydrate work.
Stock Rock's
I actually nodded my head when you gave the thumb up lol
Harvey Smale Lol, hey thanks for watching Harvey!
That's cool. Love that sound.
Thanks for posting ...great video.
That's excellent man I will have to wait till next month I have just spent a bunch of my money and have to wait for funds to come back in but I have a nice little list going thanks for any help I appreciate it I will keep in contact and you keep pumping out those awesome videos Man👍
Sounds good man, look forward to doing business whenever your ready and appreciate you watching!
To treat a gas tank, remove the tank and pour a quarter to half a cup of engine oil in the tank,and swish it around,do that at the end of every riding season,and rust will never be a problem.later.
Had one just like it in 1984. Mine was xlch, but I added the electric start. I did like the new style kicker lever. I started with a totalled out bike went through the whole thing. I
Micheal Antisdel Very cool, yeah 79 was the last year for the XLCH. I've added starters to them and kickers to the XLH aswell, its nice to have both for sure. Thanks for watching!
Sweet, another one saved from the dust./rust.
Pretty excited about this one, don't find to many this original anymore! Thanks for watching!
thanks man
If that dude still wants it tell him it's more money for the rod fix. LOL
I got a '78 ,tough little buggers
Good job
Hey thanks for watching!
She's a beauty!
Sounds awesome Frost !
Hey thanks Jos, appreciate you watching!
Hell yeah man, sounds great. I get excited every time I fire mine up. Gets your blood pumping. Lol...
Hey thanks man it really is a rush. Also gets that blood pumping when the don't start, lol. Thanks for watching!
There is nothing like the first fire up.
John VanDenburgh It really is one of those things that never gets old and can be nerve racking but always exciting. Thanks for watching!
Love the green color nlre like a od green
My first bike.....good times!
Cool Brother !! I think its awsom ...
Do i get a t-shirt???? Yea me !!! 🙈🙊🙉
Old Sportsters are 😎
Sweet. I know the anxious feeling of the first fire up. At least you didn't have to kick this one to life.
I paced around the garage for a few before hand, it's one of them "well this is either going to be good or possibly really expensive" kinda moments. There's always surprises but so far so good, thanks for watching!
I like this statement, funny but true, "possibly really expensive". But sounds like you did all the right pre-start stuff on an unknown bike and were ready to kill the starter solenoid. I wouldn't have thought of this one. Great vids. Keep em coming.
Jack Price Figures since I emphasized the solenoid sticking figures it wouldn't happen, but it's one of those things that you only need to happen once to remember. I've seen it more times then not with something sitting this long so was ready. Thanks for watching!
Just found this video, watched alot of your others. Good stuff man! Heard you say you are just north of Dayton, I'm in Middletown. Would love to see the stuff you have and pick your brain about my 1988 XLH! If you dont mind, join "Ohio Sportsters" on FB. Small group of us all thirsty for your knowledge! Great looking bike by the way! Take care
Hey thanks Mike, yes I'm just north of Dayton but about to move an hour further north. I really only mess with 85-earlier bikes so not much help on your 88 unfortunately. I don't do FB either but sure a great group of you there. I appreciate you watching the videos 👍
Man that thing sounds great
Yeah I was real surprised, I cleaned the carb but set it back to where it was and never even had to adjust the idle. She's a runner!