Jaw-Dropping Maiden Flight of the Avanti V2 EDF Jet
Vložit
- čas přidán 5. 07. 2024
- @MotionRC
rc,rc plane,airplanes,airplane,rc airplane,rc planes,aviation,eflite,plane,edf jet,planes,rc airplanes,beginner rc plane,
thercsaylors,best beginner rc plane,aeroplane,flight,rc jet,model airplane,radio control,aircraft,rc saylors,plane crash,
crash,fms,easy to fly,the rc geek,flite test,brian phillips,beginner edf jet,ducted fan,fighter jet,edf,r/c,horizon hobby,
pilot ryan media,remote control,jet,rc crash,pilot,e-flite,fms model,viper,edf jets
00:00 Introduction
01:22 take off
03:00 chase cam
04:58 in-flight review
05:38 Landing
06:37 Speeds
08:06 after flight review
08:23 Jeffs maiden
08:42 taxi and take off
09:34 in flight - Zábava
nice flights...cooking ! 😎
It’s my favorite edf!
Just got mine, love the content! Keep up the good videos.
Thanks for checking us out!😄
That was super nice Bobby. I’ve got the V1 and now I think I need another one.
I sold my V1 and got the V2. I love it... Here's a video of mine.. czcams.com/video/wPKaATecSEw/video.htmlsi=t7sHqIwYw7sfakX0
Have a great rest of your day 👍🏾 Greetings from Douglas, Arizona 👍🏾 🌵 🦠 😷 🇵🇷
Wow. Nice and stable and quick. Would need a space and it would be in my fleet. Good showing.
Back in stock mines on the way! I am still flyin' the V1 and am honestly thrilled with it!
If you have a good v1, just buy the new edf and boom you got a V2
I have the v2 coming, i like the colors, gear, new edf, and the pilot and all. Its a nice jet and worth having. Ill leave the v1 as is and keep flying it. :)
Not an Avanti fan but they did a fantastic job on this, improving everything. You sure flew the snot out of it.
That sounds bloody awesome
I fitted the upgraded 9 blade & 120A speedy to my V1, beautiful sports jet. 👏
I'm going to do the same for my v1 too!! I just love them
@@RCPlaneReviewer
Added bonus of reverse thrust with 120A speedy, handy on bitumen runway plus looks and sounds super cool!
Great video and flight. Did you set the radio up for this plane precisely by the book? Or do you have special high rate, low rate, and expo recommendation settings? Are you using a receiver with AS3X and SAFE capabilities? Thanks
Hey thanks for checking out the video! Yes it was all stock by the book, no other changes
Can't wait to fly my got the freewing afterburner in my where are you located? I enjoy the channel
Hey! We are located in NC! Thanks for checking us out too really appreciate it
Dang that thing is cooking!! I need to put that power system in mine wow!!
I have it in my f-5...153mph no problem
@@RCPlaneReviewer I seen that video that was amazing!!
The avanti v2 and couger are my only 80mm jets where im happy keeping them at 6s. They just perform great the way they are. Stuck a 120esc in there tho as peak pulls are +115A. Performs like a Viper90 but at 2/3 of the cost.
You are absolutely right!!!!
Woohoooo very impressive!!!
CG 105-110mm?
Yep! All factory CG worked
@RCPlaneReviewer thank you for the quick reply!! 👍
Hey Bobby ,great video.
How did you program your ESC /programming card?
Hey Mark! I didn't program the esc, I normally never do anything with the esc in these videos, but this is all stock.
That's scary because mine came with timing High and lvc is set too high I have lost a few Jets not checking the perimeters of the ESC apparently there's no programming card for this particular ESC I contacted motion and they didn't know if you don't have any problems and that's good to know if you can run on high settings thanks for your reply have a great day
Omg that’s cooking. I wish I had a field like that. I’d have to have that ufcI had a place to fly it.
Come and join us!!
Hey guys, I enjoy your videos very much. Keep up the good work! I purchased the Avanti V2 based on your speed test. Can you tell me if you did anything special to get that performance? I only got a max speed of 115 in a dive, around 100 straight and level. I tried different batteries, then used the amp meter to confirm motor was working correctly. Would love to know how you did it.
I flew it all stock! With HRB 5000mah 60c lipos and HRB 4500 100c lipos. Nothing special other than a 10 knot tail wind. Also we are about 300ft above sea level. All these can have an effect on these edf! I appreciate you checking us out!! Subscribe if you haven't already 🫠
That helps, thanks.
@@RCPlaneReviewer
That takeoff was so fast and early for an EDF! 6S?
It's that powerful 2150kv edf unit!!! It's on 6s
Great 👍 Flying Guys I’m enjoying your content ✅
Thats quick for bone stock!! Love the glossy finish and the new fan system seems to be working really well!! Good stuff!!
I love it!
We did the speed trial and its WICKED fast!
Awesome plane , cool views of your field , was it cleared out just for Rc flying field ?
Yes it was! It's not the flatest but it's good!
4 the money it's a 10
Absolutely 💯 right. Alot of airplane for the money 💰
Hey Bobby, avanti v2, stinger 90, fms futura....which is the best and where are the main differences (i know that the etinger has a 90mm fan of course)?
Id say 1st the Avanti v2 2nd goes to Stinger 90 for power and speed and price, then FMS Futura. it's fast and nimble but I don't think it flies as well, stable and agile and predictable as the Avanti v2.
@@RCPlaneReviewer thanks bobby! i like your videos very much. you should have MUCH more subscribers.
I've a chance for this Avant, and I like it very much. The other very attractive EDF is the FMS Futura 80mm. I think the suspension is better on the Futura, the Viper 90mm, and FMS Viper 70mm. They both have main gear full trailing-links struts with a piston, the Avanti has odd looking springs. The
do you like the avanti better than the viper 90?
I do! i think it flys more stable and agile