NEWEL POSTS ARE INSTALLED!
Vložit
- čas přidán 2. 08. 2024
- Finally got these newel posts installed and I think you will find the method of installation very interesting. Thanks for watching!
NEXT LEVEL CARPENTRY:
/ @nextlevelcarpentry
MY WEBSITE: finishcarpentry.tv
GLUE I USE: finishcarpentry.tv
INSTAGRAM: / finishcarpentrytv
GET A SHIRT HERE: finishcarpentry.tv/
EVERY TOOL I USE: www.amazon.com/shop/finishcar...
www.dfwcrownmoulding.com - Jak na to + styl
Pro tip: When cutting metal with a chop saw, you want your thickest section to span vertically, not horizontally. In other words, stand your flat bar on its edge. It will cut A LOT faster and produce a lot less heat. When cutting angle, lay it on the table with the free ends pointed down and the intersection pointed up. It’s a lot easier to lock it in with the clamp and cuts faster/colder than it would if you position it flat.
I love Matt's channel, good shoutout to him! And nice work!
You have been a great inspiration to
Me
I live on cape cod have been doing carpentry
Sincei was 12 years old I am now 36
And finally quit my job to do my own custom work
When I started watching your videos
My life got better
Thanks bro
Post videos
This project just keeps getting better. Looking forward to seeing more of it.
First time seeing the wobble free post install. I love the idea and execution.
I appreciate that I can learn something clever each time I watch your videos.
Looking good Richard! Love the raised panels for sure. Perfection.
Threaded rod is what we use on all of our pony walls and large railing posts. We use a bit thicker steel plate, but you shouldn't have any issue at all, your span isn't very long and you're material is fairly light weight. Nice job once again, and thanks for the content! 👊
Fantastic look. Can't wait to see the railings! Keep up the great videos.
LOVE YOUR CHANNEL MAN! Your videos are super helpful, I enjoy watching you work and I do learn a ton from you! I'm a DIY guy but am a perfectionist and your videos help me a ton. Last but definitely not least Thank you for your service to us and your Country!
Brilliant work buddy! I love learning new tricks of the trade. Been a carpenter for 9 years and whenever I need to refresh myself on trim I visit your vids.
Nice alteration to the design of Next Level's post install. Very enjoyable watching skilled craftspeople design, try, and improve an idea or application. Thank you to both Finish Carpenters! -Bob...
Great video and product... I am a professional trimmer here in upstate NY...love your videos...I even have my guys watch them!!
Whoa! That is a brilliant plan and solution. This is an incredibly informative video, and my favoriate one yet! I’m so happy for you and the self gratifying rewards of do it yourself home improvements and ownership. (It’s my favorite hobby, and I have a LOT of hobbies.) I almost forgot to mention, those posts are absolutely perfect!
Cover the thread with liquid nails, the one that goes into the subfloor. And use a silver Sharpie to mark on dark, and metal surfaces. Works grear
Keep building ! I subscribed and I rang the bell. Love people who strive to be better at what they do and give credit to those who they have learned from.
I’m a huge fan of you and Matt. I watch everything you both put out. You’re two totally different carpenters, but both great!
Awesome job, they look great. I can’t wait to see it completed.
Love your channel dude, learning so much.
Tip for finding the center on the steel is just to scribe a line corner to corner and make a cross. Give. You the perfect centre with no measuring etc
Keep it coming
Looks great! CZcams definitely pays attention to what we watch. I was watching your progress and that same video you referred to showed up in my feed. Watched that, and now here you are. Thanks for posting the awesome content!
Awesome stuff Nice you gave credit to Next Level. Your a good man.
Amazing work! I’m learning and getting ideas from your videos. I ALSO purchased the miter protractor per your advice in one of your other videos. Thankfully I’m in FTW so I’m also going to the get materials from the plywood company you talked about.
I installed a knee wall that way back-plated through the subfloor 35 years ago. Great job.
Looks great! I might add some epoxy to the rod before threading into the floor joist, but I tend to get carried away with things. For instance, I am now thinking that it would be extremely rigid to cut out a recess in the subfloor to glue and bolt in a 3” x 1/4” plate to span the entire way under all 3 posts, and install your flooring over the plate. Then drill for your rod as normal, but run a tap through the 1/4” plate, so the rod has metal threads to grab on its way into the joist which would prevent the rod from wallowing out the bores in the joist and you wouldn’t have to worry about over-tightening and pulling your rod out of the wood.... Like I said, I get a little carried away and end up spending way more on a project than it should ever cost. Lol
I used the threaded rod technique and it worked great! Many thanks to you and Next Level Carpentry for the ideas.
Throw a block to keep the bottom
in place. Awesome way to mount them.
That's an awesome little trick on placing those posts!! Great work man!!
You keep getting better and better. I learn so much just watching your videos. Thank You.
Excellent! Thanks again. The knowledge keeps flowing.
Nice work Richard. You are r3ally stepping up the design of your home. Looks great.
MJ is an awesome carpenter and teacher. Nice work Richard.
Excellent work as always! Looking forward to next vid, thanks for sharing.
These posts are awsome. It was good to see how you installed them! Thanks for sharing
Nice job, I would recommend using a block at the bottom of the post inside to keep the bottom of the newel located where you want it. Maybe inset a cap on the bottom and just drill a hole. I've been doing more railings lately on my projects. Also I would recommend adding solid blocking at the rail attachment points and check out zipbolt for rail attachment. The old school rail bolts are a pain, but they are super strong. Regular screws, pocket hole screws are just not strong enough for railings. One more fyi most building codes allow you to go up to 8' between newel posts for rails.
Nice sturdy construction. Thank you for sharing.
Great post! Thank you for the tip! It will come in handy in near future!
PS! You don't need to measure to find the center of the metal. Just draw a cross (from corner to corner), then you will find the center.
Two of the best carpentry channels, Next Level Carpentry and Finish Carpentry. You both make things look way too easy.
Outstanding Marine, beautiful work.
Thanks so much, I drilled and taped crown stops to my dewalt DW705. Worked like a champ.
Thanks Richard for sharing with us all. They look beautiful! My finish carpenter isn't going to like me but, thankfully I only need three of them!
Love seeing home projects! You can always take it to another level compared to doing work in someone else’s house.
They are looking good. Take a dowel, drill a hole in the center, tap in a tee nut in the hole, drill a hole in the newell cap and glue in the dowel with the tee nut inside. Then you can screw Newell cap onto the threaded rod.
Nice work, that came out perfect. 👌
Great video, great system, I’d like to make some after watching. Engineers tip: always keep two bolt threads above the nut. Thicker top plate for that size thread, even timber plate on four corners. But solid system
Excited to see the finished product
Also adding a sleeve of rigid conduit over the all thread will take majority of initial deflection out . Great job and keep sharing .
Wow, alright, I end up saying wow every video I watch of yours, I am soaking up all this information! Thank you again!
Yes! we have done that on plenty of old houses. we try to get a nut and washer on the bottom too, when there is access.
Great job man! I really like that method of installation.
Nice work. I saw the next level video and thought it was brilliant. Kudos to you for sharing your knowledge.
Super nice newel posts! The wood that your top bracket sits on will compact a bit from the pressure of the bracket over the first few days, so go back and re-tighten in a few days before putting a top on. Also, like someone else suggested, a wooden square infill (like a square wooden washer really, that fits snugly inside the post) at the bottom of the threaded rod will assure that the bottom of your post cannot move. You are probably going to have some trim along the floor anyway, but a bit of extra sturdiness is never going to hurt.
Thanks for being honest n not being fake and NOT taking the created of another.
Awesome! Well done. Love the channel.
Super clever install Richard! Looks great.
Third segment video on your newel post construction, and installation. Looks fantastic. Kudos.
Una persona que reconoce la grandeza de otra persona, demuestra su grandeza y la humildad con que vive... Mis respetos
y mi admiracion.. saludos !
Great work!😎👍👏 Always learning something every day.
Wow this is so cool! Your house is going to be so cool when you’re done !
Hi Richard,
A little tip when need to mark black steel sticking a piece of masking tape always a fast way for marking your measurements, nice high quality workmanship you doin there, keep the good work up.
proudpalestinian1 or you could just use a sharpie
@@garykee9117 nah. pencil mark is always sharper than a sharpie mark.
lostintime86 they have point tip sharpies that mark metal no problem that will be as accurate as a pencil I use than all the time for union commercial work...
lostintime86 he’s not building a space ship a 32nd or even a 16th isn’t a big deal for what he’s doing either way a sharpie will give you just as fine a line as a pencil and you won’t need to tape or paint your steel before marking it
Use a scribe to scratch the metal. Fine line and very accurate.
Nice! I have an old Delta 10" compound miter saw I wore out ( won't hold a good enough angle for trim ) that I put a Dewalt metal blade on for cutting steel. Cheap and it works good enough for me.
Thanks for plugging Matt! You both are awesome!
Very interesting and yep looks really secure. Going to look awesome.
Watching this video, Texas came to mind. I hope you and family were ok during the storm and stuff.
That cool man , I might have added some adhesive to the bolt whole just to make sure over time it held , but what a innovation man. I’ll d fenatly use this in my next build thanks bro
I mounted my post the same method, after watching the same video you watched. Worked awesome
Thanks so much for taking time to share your knowledge and experience love every video ppsted thanks
I watch your videos all the ! Seem them all, some more than once. And I have used you teaches in mr Carpentry business. Keep up the awesome videos!
Well done to be honest watching that when you first put the rod in it looked that flimsy didn’t think it was going to work but what a finish absolutely perfect can’t wait to see the finished article 👍
Really awesome from the build to the install.
Going to be great looking when complete
Love it. To make it stiffer, while building the post put one of those bars in the middle. You could still get a nut on it with a crows foot and it wouldn't have to be super torqued as its just there to remove the flex as opposed to securing it like the top one. Alternatively or in addition to it, you could "double the wall thickness for a few inches at the bottom or even insert a block to make it solid at the bottom and/or put a tie bar down there as well. The more solid at the bottom, the more resistance to tilting. But I think with the other post you'll be fine. Last thought, pour some quick set cement in the bottom...wait...could that actually work, with four 1/4 inch rebar poles set into the floor and up a few inches?
You took that to the next level man, really nice build video. Cool of you to call out the next level carpentry, not may you tubers do that.
I way up north in Lucas, TX but maybe one day I will need your help doing some work.
Man you have shown me so much since I have been watching your channel. Thanks
Appreciate the detail. Excellent presentation. Keep up the good work!
Love watching your videos. You're awesome. I learn something every time.
Killer look man. I did a knee wall at top of an open case few months back. Used a similar method to lock the end in. But wished if have seen this 1st. That threaded bar was a nice touch. I'll have to remember that..
Part 2 please! I wanna see the whole process with all post installed with rails fully completed. Looks awesome.
Man, I admire your skills. Your customers are in good hands.
That’s freaking brilliant ! NLC a great channel as well !
Great job man! Thanks for sharing knowledge 👌✌️
so awesome great job and great way to install it
Great job! Keep up the great work!
Great Method. I do the same way but I use a hardwood sleeve at the bottom with washer and nut. So when you slide the post over it centers and gives it even more strength. , still using the top nut but I use a piece 3x3 or 4x4 3/8 steel stock so it’s captured at the top as well.
That method of Anchorage has been around for many years. I don't know the size of that bar that you drill the hole through on the top but it look like the 5/8 hole drill in it knocked out almost all the strength I would have gone with a wider piece. Thicker steel would have been better too. Keep up the good work.
Hey man, That will be very solid, usually what I do is I install a solid 4x4 post into the joist like 10” and wrap the post, but what you did is good idea, thank you
Super idea. I would suggest putting a block of wood through the bar and fixed to floor. It will hold post square so handrail cuts are good. Keep up the good work.👷
Even experienced carpenters can always learn something, good job. The long list of comments have a wealth of info. One suggestion Richard: I often will skip viewing a video because it is a bit too long for the time I have. Many of your videos can be easily shortened without losing any useful content, an accomplished writer explained to me about economy of words and this applies to videos as well. I think you can expand your views a lot by trimming the length. Thank you again Richard!
This applies to most videos on youtube...and I get where you are coming from BUT his content is good and cutting/trimming takes A LOT of time (multiply that by # of videos he put out). I don't fault him...his time is money. 200K subscribers says he is doing just fine w length of video
Very impressed mate. A lot of work gone in the that!
Looks rally good man,unbelievably very time consuming and a lit of work but is about to pay off, thanks for sharing.
Good job, If you scribe a diagonal line from the end corners of your piece of metal, where they intersect (center of the X) is the center, saves a lot of measuring
Nice looking work.
Great stuff as always Richard!
Awesome I had no idea the threadd would tighten st the bottom into the wood without a type of wedge anchor awesome video man
Great job, I would suggest using medium strength thread lock (the blue one) on the threads so the nut does not become loose over time
It’s called allthread and awesome job bud keep up the good work
One suggestion would be to put some resin in the hole for the threads to anchor to, that way it can never 'loosen up'. It would then be one solid unit with the joist.
Very nice job!
Looks great!!
Excellent as usual my friend...
Fantastic!! Subbed to Next Level. Thanks for the heads up!
Did you have some type of threaded anchor inside the floor when you installed the threaded rod
@@christdied4us It's done the same way Matt Jackson does it. The threads on the all thread cut their way into the framing below the finished floor. The hole drilled in the floor framing has to be no bigger than the shaft of the all thread, just like when drilling for any screw.
looks great as always keep up the good work
Brilliant mate 👍