@@southstreetbarbecue7875 Me when i told my mom i would be done working on my jeep in the driveway. I’m almost 18 and she might kick me out before i engine swap the jeep in the driveway
Um, Rudy… music choice? Congratulations! Best of luck on your new venture! (What I love is you have regular tools just like me… and the same number of people helping you… maybe my truck needs an upgrade…) I can’t wait to see the Rudycon full done!
Rudy I've been watching you and your fabrication skills for along time and as a welder/ fabricator myself for over 38+ yrs, your channel will do GREAT!!! Keep at it my friend! Your a good man! Troy
Rudy, you might want to add B and C pillar supports for your cage, as well as a side to side triangulated cross brace so it doesn't just fold over like a taco if it rolls. When I built my XJ cage, I did the upper halo, the A pillar support through the fenders like you did, then B and C pillar supports through the cab to the floor and then tied to the frame. I also added a side to side cross brace to the two C pillar tubes coming through the cab. I plan on adding one to the B pillar as well.
@@brandonthompson9957 Those would be D pillar supports, C pillar is right behind the back seat. When building a cage, the area around the passengers, A, B and C are the most important areas to cage and supports.
Rudy, you are one of my favorite characters on matts off road recovery, with the age that you are, your fabrication skills are phenomenal, can't wait to see what you do on the channel. Feedback wise, please get a wireless mic to mount on your shirt, the audio will be a thousand times better.
ditto on the cordless lapel mic. buut also with a dead kitty for windysettings. one step at a time eh ???!!!!!!!!!!!! he's got a great sense of humor ...
@@tracykooken2606 +1 for the better sound but just the dead cat for your camera microphone should help for a quick and dirty improvement. $10-20 and no extra equipment, editing, and audio syncing needed. Lavolier mic is great but more work money. Also I would recommend getting some people talent. talking to the camera is tough chemistry to maintain although you do a pretty good job.
Congratulations Rudy on your new venture. So, I'm curious, and I'm sure many are, about the shop and how this came about. Please do a video on the shop and where this all started and so on. I'm excited to see how this goes. By the way, the shops big and it echoes a bit in the videos. Might need to invest in a lapel mic.
Rudy I can't tell you how much I enjoy your Channel and how much I miss you on Matt's off-road recovery and that you and Janelle make a awesome team you've always been an enjoyable watch. THE roll cage was an awesome build and shows your creative skills and fabricating. So I can see that you wanted to go out and do your own thing and not be I won't say control but you wanted to do your own thing which I enjoy good luck I'll always be there watching
I was wondering where you had gotten off to. This is a great idea/plan. Your shop looks great as well. Looking forward to tagging along on all of your adventures!
what a go Rudy, by this time next year you will have an old man in a chair helping, an amazing mechanic friend stopping by and a hot chic as a regular!!! Oh ya dont forget the dog running around on your adventures. Mark my works you will have 250k subs by this time next easy peezie.
Here. Congratulations Rudy. Can’t wait to see where we go! We? Yes, because guys like you, Matt, Paul… inspire the rest of us to build stuff in our home garage.
One of my favorite parts of watching Matt’s off-road Recovery is the fabrication and custom work you guys do I’m looking forward to more of your videos!
That is THE nicest looking exo cage I have seen on an XJ. Awesome job Rudy. I would love to see how you did the uprights in the rear. Watching the roof video now. 👍🏻
2:17 Future handy tool - Could be as simple as a U-Bolt (muffler clamp) clamped to the end of round tubing. Level the flat. It's a good reference as to keeping the tube from spiraling while rolling it. 6:07 Put a hole in down tube that lines up inside the cross tube. Also have a hole at the bottom of the down tube. For water to escape. I am impressed with your fabrication & design skills.
I mentioned this before that he would do well having his own fabrication shop with his mad skills. Having his own channel and doing his thing is a huge step. Before you know it, he'll have his own camera guy.. Grats Rudy!!
You ABSOLUTELY shoud template every tube and make a feew of these to sell! Best exocage/rack I have seen on an XJ so far! I would probably buy one for our project.
I’ve been noticing things in the background over the last few months and especially during Rudy doing/welding that gate. I figured there was “expansion” in the air. Neat looking shop Rudy and congratulations. Oh, doesn’t look like you’ll have to worry about punching a hole in the ceiling with vehicles on the lift👍
Rudys adventure and designs and Matt’s off road recovery is the future for you and your kids, and your generation. Best way to expand great to see you whent solo Rudy Congratulations 🎊🎈🍾
Really very happy to see you starting up your own channel Rudy. I have really wanted to see this happen for sometime now. Really looking forward to watching your fabrications and other projects along with your off road adventures.
The off road recovery is great, but I live for the fabrication. I've seen you weld and you are good. I will watch every video you upload. Good Luck with your channel.
Glad ur fabing up stuff on ur own channel , u got good skill's ! Can't wait till half done is Full done lol but we all know ur never really done fixing up toy's 👍👍 take care and have fun and Thank's for Posting. ✋😎✌️
Wow, I found out that Rudy was going to get his own channel about 30 minutes ago……..and there is already 11,000 subscribers onboard. I’m seeing great things in this boys future. Go Rudycon!
Congrats Rudy, on taking the next step and starting your own channel!! You have amazing skills when it come to metal fabrication and the ability to bring your ideas to life! Can’t wait to see what the future has in store for your channel.
I came as soon as I heard you say you had your own channel. Don't tell your dad but I paused his video to come find yours lol. I look forward to seeing your builds. That's one of my favorite things on the channel. Congratulations on branching out. When I saw your exoskeleton the other day I was kinda upset there wasn't a video on MORR of it. This was a great surprise. I bet your dad's proud
Super cool roll cage Rudy. You have a real talent for designing and fabricating stuff. I still watch your Dad`s videos and i love yours too although i miss you in your dad`s. You have moved on and i am sure great things are in store. Love the adventures too. Best wishes from the UK.
I am super stoked to see what you do with this channel. Ny favorite parts of Matt's Off-Road Recovery fabrication parts always involved you doing your magic. You're quite gifted and I love watching it, and I am so looking forward to this new channel very much!
Congrats on your channel Rudy. I really enjoyed the fab you did on Matt’s channel and look forward to your creativity on your own projects. The Rudicon already looks great with the cage and really cool roof. Nice work man.
I love your dads channel but this is very cool seeing all the behind the “scenes” type of stuff as well, also you got a big bonus jump start on your channel from all Matt’s off road recovery fans it’s awesome to see 😎🇨🇦
Will be looking forward to watching many more videos Rudy. As a retired steel fabricator myself I was really impressed with the gates you made, so I am happy to be here on day one of your new channel. Good Wishes my friend and God Bless !
lots of fun hanging out with you, while you make your Jeep Rig ready to recover any call ... What we are all learning from you, Robby , Fab Fats , Holly and all of the other CZcams Family abd tiye Dad Matt is OVER BUILD , extra heady, , deep welds on both sides and double check everything !! .. Rudy = Ready for MOEB ! ... Have fun Bro , you work hard and deserve some down time.
We gotcha bud! As much as I do love watching the banana tear stuff out of nasty situations, I've always been a fan of what you're doing with your rig, on the fun and adventure side and find it inspiring for what I want to do and be doing with my XJ.
You really do great work Rudy. Glad you have your own channel, but I do miss seeing you more on MOOR! Hope you plan to stay busy on that channel as well. A man's gotta do his thing though...so I totally understand. You have some talent and I appreciate you sharing that talent with the rest of us. God speed.
Again Congratulations on your channel, looking forward to the adventures as well as the designs that you come up with. Glad to be on the ground floor of what is going to be an epic channel!!!
Love the way you are all supporting each other's channels and growing so fast! I look forward to Sundays SO much more these days. Rudy......fix the right-hand drop on that thing! :)
Rudy I am looking forward to seeing the videos on your new channel. You are a natural in my opinion when it comes to CZcams. I like the roll cage it will definitely be added safety to have
Wow Rudy….What you have created with this video was amazing. I have watched all of Matt’s Off Road. What you did was really well done. The “one man band” is a great perspective. I don’t mean that like you broke up the Beetles, but as nice break off from the recovery side of things. If Matt’s Off Road had a son it would be this, I mean it is this. Thank you and keep up the amazing work!!!
Congrats Rudy on the new adventure! Love the 'outside' rollcage. Haven't seen that before. Sure saves both headroom and doesn't inhibit your access or egress... Looking forward to joining you on your escapades even though only voyeuristically!
Looks great Rudy! Congrats on your starting a channel for yourself! Your a talented guy, as proven on your dad's channel. You've got my support. Subscribed!
I really enjoy watching all your fab work. Reminds me of my dad, he was always doing something like this; making his own topper for an El Camino or splicing two Lincolns together into a "Ranchero" look. The Rudicon is looking good. Keep up the work and channel!
I got a glimpse of that roll cage in another one of your guys videos and thought it would be interesting to see how you put it together. So far so good Rudi. We'll keep watching your chanel.
Your cage looks great. Consider tying the roof bar into a harness bar behind the front seats. Maybe add a piece of 2x4 from your frame rail to the slider as a harness bar mount through the floor. Would give you a secure place to attach some harnesses as well as shoring up the middle of the roof bars. I love the look though. Very nice.
Bravo Rudy-I like the vibe of your channel: nice music selections, appropriate time lapses, and you are a natural in front of the camera which is challenging when solo. 👏🏻👏🏻👏🏻✌🏻
step by step exterior roll cage build cutting, bending, notching to fitment and then final weld a great job is performed! Yaw is bound to have changed with all the high weight / center of gravity, but for much greater increased roll over protection, it's a solid trade off great job Rudy!
Seen every episode of MORR but I clearly missed the one where it talked about RAD... I was starting think your building the Rudicon of channel and we wouldn't get to see the build but super glad I found this channel!
Man I wish I had known about this a while ago. I think it's cool that you got your own channel and you're going to do very well obviously! Can't wait to see future videos
This is epic. I am capable of building things myself, but it is quite humbling and inspiring to watch someone at your level fabricate. "I don't have the ideal tool, but I do have this angle grinder with a flap disc" was highly relatable.
DUDE. Watching your video where you were testing the Rudicon. You stopped at Mavericks which we don't have here. But in the background we seen a FRICKEN Sinclair with the dinosaur. MAN, I haven't seen one of them since I was a kid. You made my day!!!!
For those that don't remember or didn't know, Rudy had a fairly good fabricating gig going when MORR started - made ATM machine frames, among other things, if I remember correctly.
Love what you're doing with 1/2 Dun! I think those front shock protruding mounts are badass. What your doing now with the roll bar and sunroof compliments the beefy shock mounts. I think for paint if you purposely give 1/2 Dun a rusted patina look it would definitely be Mad Maxx inspired beast. Interested in seeing what your vision will look like Cool channel
Looks great Rudy!! Once 1/2 dun is ALL DUN let me know if you need it painted :)
I have a feeling the name is going to change from 1/2 Dun to Nevr Dun. There's always something else to do with those beasts!
What colour do you think a Rudicon should be?
@@seemyworld1 He clearly likes purple ive noticed
@@southstreetbarbecue7875 Me when i told my mom i would be done working on my jeep in the driveway. I’m almost 18 and she might kick me out before i engine swap the jeep in the driveway
@@cablenowadays6586 I have an F250 in the garage waiting on a motor. My wife might kick me out if I don't get it done!
Um, Rudy… music choice? Congratulations! Best of luck on your new venture! (What I love is you have regular tools just like me… and the same number of people helping you… maybe my truck needs an upgrade…) I can’t wait to see the Rudycon full done!
Rudy I've been watching you and your fabrication skills for along time and as a welder/ fabricator myself for over 38+ yrs, your channel will do GREAT!!! Keep at it my friend! Your a good man! Troy
Rudy, you might want to add B and C pillar supports for your cage, as well as a side to side triangulated cross brace so it doesn't just fold over like a taco if it rolls. When I built my XJ cage, I did the upper halo, the A pillar support through the fenders like you did, then B and C pillar supports through the cab to the floor and then tied to the frame. I also added a side to side cross brace to the two C pillar tubes coming through the cab. I plan on adding one to the B pillar as well.
I was thinking the same thing.
Yeah, it's just a heavy duty luggage rack. Still a nice job.
It has C pillar supports, very rearward, right at the back hatch. You can see it in the testing he did in his first "I cut the roof off" video
I expect it's half done and we'll see more later.
@@brandonthompson9957 Those would be D pillar supports, C pillar is right behind the back seat. When building a cage, the area around the passengers, A, B and C are the most important areas to cage and supports.
Congrats Rudy! The fab part of Matt’s, Pauls, Chads, Robbie’s, channel is my favorite. I’m looking forward to your endeavors!
Don't forget the adventure! looking forward to that as well :)
I spent 35 years working with tubing and I am really impressed with Rudy’s bending skills.
Rudy, you are one of my favorite characters on matts off road recovery, with the age that you are, your fabrication skills are phenomenal, can't wait to see what you do on the channel. Feedback wise, please get a wireless mic to mount on your shirt, the audio will be a thousand times better.
ditto on the cordless lapel mic. buut also with a dead kitty for windysettings.
one step at a time eh ???!!!!!!!!!!!!
he's got a great sense of humor ...
plus 1 for a microphone
ditto ditto on the mic, I can't hear you half the time.
@@tracykooken2606 +1 for the better sound but just the dead cat for your camera microphone should help for a quick and dirty improvement. $10-20 and no extra equipment, editing, and audio syncing needed. Lavolier mic is great but more work money. Also I would recommend getting some people talent. talking to the camera is tough chemistry to maintain although you do a pretty good job.
I WOULD ADD TO KEEP THE MUSIC AT VERY LOW LVLS, i HAVE TO KEEP TURNING VOLUME UP AND DOWN, GREAT START TO YOUR CZcams CHANNEL
Congratulations Rudy on your new venture. So, I'm curious, and I'm sure many are, about the shop and how this came about. Please do a video on the shop and where this all started and so on. I'm excited to see how this goes. By the way, the shops big and it echoes a bit in the videos. Might need to invest in a lapel mic.
I like the echo ,, it’s a big building ,open ,, the echo is realistic ,, my opinion
Second that, except the audio. While it is echoing indeed, it doesn‘t make it less comprehensible. So, no need - at least for me.
And a Camera Man when he can. I'm getting kinda motion sick watching.
Agree on new shop. Those other guys might get jealous.
Happy to see Rudy striking out on his own. As the saying goes.."nothing risked, nothing gained"
Or no risk it no biscuit.
Yeah, a little dental manipulation, a High-and-Tight haircut. He could be a freekin' movie star! Big potential there.
@@inmyopinion6836 ok boomer
Rudy I can't tell you how much I enjoy your Channel and how much I miss you on Matt's off-road recovery and that you and Janelle make a awesome team you've always been an enjoyable watch. THE roll cage was an awesome build and shows your creative skills and fabricating. So I can see that you wanted to go out and do your own thing and not be I won't say control but you wanted to do your own thing which I enjoy good luck I'll always be there watching
I was wondering where you had gotten off to. This is a great idea/plan. Your shop looks great as well. Looking forward to tagging along on all of your adventures!
what a go Rudy, by this time next year you will have an old man in a chair helping, an amazing mechanic friend stopping by and a hot chic as a regular!!! Oh ya dont forget the dog running around on your adventures. Mark my works you will have 250k subs by this time next easy peezie.
Here. Congratulations Rudy. Can’t wait to see where we go! We? Yes, because guys like you, Matt, Paul… inspire the rest of us to build stuff in our home garage.
One of my favorite parts of watching Matt’s off-road Recovery is the fabrication and custom work you guys do I’m looking forward to more of your videos!
Can’t wait to see what you end up doing with this channel Rudy, happy to be one of your first subscribers 😁 good luck & god bless homie
7 hrs and there was 20k
@@matthewfrost532 almost 40k now 😳
He's going to get 100k in a yr easy.
As soon as I heard I got on I was at work when that video uploaded
@@matthewfrost532 looks like less than a week to 100k. !!
Yep lol
Rudy!!!!!! I found your channel! Yay! Tell your dad to link it in his videos descriptions! But great so far can’t wait to see more!! 👍👍🇺🇸🇺🇸🍻
That is THE nicest looking exo cage I have seen on an XJ. Awesome job Rudy. I would love to see how you did the uprights in the rear. Watching the roof video now. 👍🏻
2:17 Future handy tool - Could be as simple as a U-Bolt (muffler clamp) clamped to the end of round tubing. Level the flat. It's a good reference as to keeping the tube from spiraling while rolling it.
6:07 Put a hole in down tube that lines up inside the cross tube. Also have a hole at the bottom of the down tube. For water to escape.
I am impressed with your fabrication & design skills.
Everything was great, except the sound. That thing is a Beast.
Can’t wait to see the adventures!
Thanks Rudy.
Yes, this crew needs better mics.
Nicely done, Rudy, nicely done.
I mentioned this before that he would do well having his own fabrication shop with his mad skills. Having his own channel and doing his thing is a huge step. Before you know it, he'll have his own camera guy.. Grats Rudy!!
Yeah .... but don't pinch Trevoe ... lol. Bushyboy Oz.
@@ewengillies9826 Right 🤣😂
You ABSOLUTELY shoud template every tube and make a feew of these to sell! Best exocage/rack I have seen on an XJ so far! I would probably buy one for our project.
Very well designed, engineered and constructed Rudy. It looks great too!
Guest appearances from Ed would be a neat feature! Thank you for sharing the great content.
I’ve been noticing things in the background over the last few months and especially during Rudy doing/welding that gate. I figured there was “expansion” in the air. Neat looking shop Rudy and congratulations. Oh, doesn’t look like you’ll have to worry about punching a hole in the ceiling with vehicles on the lift👍
I am very impressed with the new roll cage. It turned out very nice. Good luck on your channel Rudy
Rudys adventure and designs and Matt’s off road recovery is the future for you and your kids, and your generation.
Best way to expand great to see you whent solo Rudy Congratulations 🎊🎈🍾
How exciting! Been missing you on your Dad’s channel. Good luck with your channel. I’ll be watching!!
Really very happy to see you starting up your own channel Rudy. I have really wanted to see this happen for sometime now. Really looking forward to watching your fabrications and other projects along with your off road adventures.
A beautiful "out of the box" roll cage Rudy.
I hope this takes off for you, I really enjoy the fabrication and modifications you have been doing to half-done.
Great job!!!! That is what makes a Jeep, an exo-cage! Very clean look too. I've seen a few nasty hatchet jobs. Again, great work.
The off road recovery is great, but I live for the fabrication. I've seen you weld and you are good. I will watch every video you upload. Good Luck with your channel.
Glad ur fabing up stuff on ur own channel , u got good skill's ! Can't wait till half done is Full done lol but we all know ur never really done fixing up toy's 👍👍 take care and have fun and Thank's for Posting. ✋😎✌️
Wow, I found out that Rudy was going to get his own channel about 30 minutes ago……..and there is already 11,000 subscribers onboard. I’m seeing great things in this boys future. Go Rudycon!
Over 50k now!
Just shy of 80k 🤯
Nice work Rudy well done.
Congrats Rudy, on taking the next step and starting your own channel!! You have amazing skills when it come to metal fabrication and the ability to bring your ideas to life! Can’t wait to see what the future has in store for your channel.
I came as soon as I heard you say you had your own channel. Don't tell your dad but I paused his video to come find yours lol. I look forward to seeing your builds. That's one of my favorite things on the channel. Congratulations on branching out. When I saw your exoskeleton the other day I was kinda upset there wasn't a video on MORR of it. This was a great surprise. I bet your dad's proud
I feel like people are going to learn a lot from you! I think this channel is going to be WAY bigger than you imagined
Super cool roll cage Rudy. You have a real talent for designing and fabricating stuff. I still watch your Dad`s videos and i love yours too
although i miss you in your dad`s.
You have moved on and i am sure great things are in store. Love the adventures too. Best wishes from the UK.
I am super stoked to see what you do with this channel. Ny favorite parts of Matt's Off-Road Recovery fabrication parts always involved you doing your magic. You're quite gifted and I love watching it, and I am so looking forward to this new channel very much!
I am there for you Rudy. showing how you get your angles and bends will make interesting content.
Congrats Rudy! Been watching you for years! Looking forward to your channel!
You are the greatest welder I have ever seen! Greetings from Chile!
Congrats on your channel Rudy. I really enjoyed the fab you did on Matt’s channel and look forward to your creativity on your own projects. The Rudicon already looks great with the cage and really cool roof. Nice work man.
Congratulations on the new channel Rudy... And dam that's some good fabrication work done there Rudy!!!..🙂🇬🇧🇺🇲🇬🇧🇺🇲
Your going to have a great channel, the skills and energy your bring makes it fun to watch.
Great job Rudy. Now all you need is one of them fancy camera people to do all the recording for you. Congratulations on your new channel.
We love Matt's recovery here in Dominican Republic and I think you will do an excellent 👍 program, just be consistent 🇩🇴
I have enjoyed watching you build for your Dad now for yourself that is great 👍
I love your dads channel but this is very cool seeing all the behind the “scenes” type of stuff as well, also you got a big bonus jump start on your channel from all Matt’s off road recovery fans it’s awesome to see 😎🇨🇦
WOW, 90K+ subs and your channel is 2 weeks old! fastest silver CZcams badge in history. Congrats Rudy!
Will be looking forward to watching many more videos Rudy. As a retired steel fabricator myself I was really impressed with the gates you made, so I am happy to be here on day one of your new channel. Good Wishes my friend and God Bless !
lots of fun hanging out with you, while you make your Jeep Rig ready to recover any call ... What we are all learning from you, Robby , Fab Fats , Holly and all of the other CZcams Family abd tiye Dad Matt is OVER BUILD , extra heady, , deep welds on both sides and double check everything !! .. Rudy = Ready for MOEB ! ... Have fun Bro , you work hard and deserve some down time.
We gotcha bud! As much as I do love watching the banana tear stuff out of nasty situations, I've always been a fan of what you're doing with your rig, on the fun and adventure side and find it inspiring for what I want to do and be doing with my XJ.
Rudy! Rudy! Rudy! Your channel is going to be great. Nice work on 1/2 Dun. ✌️🙏☘️
Congrats on the new channel, Rudy. Looking forward to seeing it blossom and grow!
You really do great work Rudy. Glad you have your own channel, but I do miss seeing you more on MOOR! Hope you plan to stay busy on that channel as well. A man's gotta do his thing though...so I totally understand. You have some talent and I appreciate you sharing that talent with the rest of us. God speed.
Again Congratulations on your channel, looking forward to the adventures as well as the designs that you come up with. Glad to be on the ground floor of what is going to be an epic channel!!!
I like the flow of lines and the integration of the old roof support holes. Function following form.
That cage came out really good! Its always tough to have a good sleek exo cage on jeeps. Keep up the good work 🤟
Cool concept Rudy, with the exterior design. Great job.
For those worried about a B/C pillar, he has additional vertical supports running inside the body in the back and the cage is bolted to that
Love the way you are all supporting each other's channels and growing so fast! I look forward to Sundays SO much more these days. Rudy......fix the right-hand drop on that thing! :)
Rudy, your channel is a great development, and I very much look forward to you designing and making plenty of cool stuff.
105K subs in a week??? WOW!!!!! that's AWESOME!!! Congrats!!!!
Great to see more of your welding projects.. exocages are pretty cool so you’re not banging heads on the usual roll cages on the inside …
roger that !!!!!!!!!!!!!!!!!!!
Rudy I am looking forward to seeing the videos on your new channel. You are a natural in my opinion when it comes to CZcams.
I like the roll cage it will definitely be added safety to have
Glad to see all the great stuff you come up with on this channel. I'm still interested in buying that sweet rear bumper you designed and built lol.
Wow Rudy….What you have created with this video was amazing. I have watched all of Matt’s Off Road. What you did was really well done. The “one man band” is a great perspective. I don’t mean that like you broke up the Beetles, but as nice break off from the recovery side of things. If Matt’s Off Road had a son it would be this, I mean it is this. Thank you and keep up the amazing work!!!
Congrats Rudy on the new adventure!
Love the 'outside' rollcage. Haven't seen that before. Sure saves both headroom and doesn't inhibit your access or egress...
Looking forward to joining you on your escapades even though only voyeuristically!
Exo-cage saves the body from getting damaged too.
That is a "RHINO CAGE......" AFRICAN SAFARI TRUCKS HAVE THEM AND HAVE BEEN USING THEM FOR YEARS......... good job RUDY.....
They are rhino proof and if built right , can increase the load and safety capacity to DOUBLE what the truck can actually carry into the field
Great job Rudy! I would love to see Robby get ahold of it.
Looks great Rudy! Congrats on your starting a channel for yourself! Your a talented guy, as proven on your dad's channel. You've got my support. Subscribed!
Looks like you channel is off to a good start. Good luck in your new venture. Your fabrication skills are fantastic.
Congratulations to you on stepping out on your own. looking forward to watching your promising future with builds and everything else you do
Rudy, great looking shop. Please do some videos as you build the shop out. We like lusting after tools and shop stuff also.
Here we are Rudy. Now entertain us 😂.
I'm sure this channel will do great things.
I really enjoy watching all your fab work. Reminds me of my dad, he was always doing something like this; making his own topper for an El Camino or splicing two Lincolns together into a "Ranchero" look. The Rudicon is looking good. Keep up the work and channel!
Looking forward to seeing great things on this channel.
I got a glimpse of that roll cage in another one of your guys videos and thought it would be interesting to see how you put it together. So far so good Rudi. We'll keep watching your chanel.
Your cage looks great. Consider tying the roof bar into a harness bar behind the front seats. Maybe add a piece of 2x4 from your frame rail to the slider as a harness bar mount through the floor. Would give you a secure place to attach some harnesses as well as shoring up the middle of the roof bars. I love the look though. Very nice.
I'd also recommend tying the back end into the chassis or whatnot too, to give it the extra rigidity
Nice! Congrats on your own channel, Rudy! Waiting for the Rudicon to be 100% DUN! from 🇵🇭
Bravo Rudy-I like the vibe of your channel: nice music selections, appropriate time lapses, and you are a natural in front of the camera which is challenging when solo. 👏🏻👏🏻👏🏻✌🏻
step by step exterior roll cage build
cutting, bending, notching to fitment and then final weld a great job is performed!
Yaw is bound to have changed with all the high weight / center of gravity, but for much greater increased roll over protection, it's a solid trade off
great job Rudy!
Awesome fabrication work Rudy! I love how that roof rack turned out on the Rudicon. Looking forward to future episodes to see what you build next
Nearly 50K subs in two days. Great start! I'll probably never do fabrication, but I can be envious watching you.
good luck on the channel Rudy, looking forward to more adventures
Seen every episode of MORR but I clearly missed the one where it talked about RAD... I was starting think your building the Rudicon of channel and we wouldn't get to see the build but super glad I found this channel!
Man I wish I had known about this a while ago. I think it's cool that you got your own channel and you're going to do very well obviously! Can't wait to see future videos
Glad to see you have your own channel 👍 Hope to see you helping your dad with recovery’s though.
This is epic. I am capable of building things myself, but it is quite humbling and inspiring to watch someone at your level fabricate.
"I don't have the ideal tool, but I do have this angle grinder with a flap disc" was highly relatable.
looking really good Rudy. i envy your dad. cape town dad supporting u
I really like the way you designed that. Love how tight to roof line it is.
DUDE. Watching your video where you were testing the Rudicon. You stopped at Mavericks which we don't have here. But in the background we seen a FRICKEN Sinclair with the dinosaur. MAN, I haven't seen one of them since I was a kid. You made my day!!!!
Great vids so far Rudy ! I love this type of work, hope someday to own my own thing doing work like this !
I like that roll cage! You did an excellent job Rudy!
For those that don't remember or didn't know, Rudy had a fairly good fabricating gig going when MORR started - made ATM machine frames, among other things, if I remember correctly.
Didn't know that. He's always been good at fabricating since we've been watching. He makes it look so easy.
He built safes that were motorized and retracted into the ground. It was on a Morr video.
Great for you to have your own channel. Good luck and God bless.
Love what you're doing with 1/2 Dun! I think those front shock protruding mounts are badass. What your doing now with the roll bar and sunroof compliments the beefy shock mounts. I think for paint if you purposely give 1/2 Dun a rusted patina look it would definitely be Mad Maxx inspired beast. Interested in seeing what your vision will look like Cool channel
Can'wait to see what you gonna do with the body..... color...etc... (posters from your suppliers would look great on those walls !)