Silence your Gaming PC with THIS
Vložit
- čas přidán 23. 07. 2024
- Pre-Order the DROP THX Panda Wireless headphones today at dro.ps/ltt-aug20-panda
Use code LINUS and get 25% off GlassWire at lmg.gg/glasswire
Can replacing your stock graphics card cooler with an aftermarket one give you better performance and a quieter system? Today we're taking a crack at installing the RaiJinTek Morpheus 8057 - and it DOESN'T go as planned.
Buy : RaijinTek Morpheus 8057
On Amazon (PAID LINK): geni.us/Y2Apd5X
Buy Nvidia RTX 2080 Super
On Amazon (PAID LINK): geni.us/lO8xk
On Newegg (PAID LINK): geni.us/b0QMpB
Buy ROG Strix 2080Ti
On Amazon (PAID LINK): geni.us/u54AlI
On Newegg (PAID LINK): geni.us/jMn2r
Buy Radeon RX 5700 XT
On Amazon (PAID LINK): geni.us/6NPl7
On Newegg (PAID LINK): geni.us/XugoM
Buy Asus ROG Strix Helios GX601 RGB Mid-Tower
On Amazon (PAID LINK): geni.us/LP9lw5
On Newegg (PAID LINK): geni.us/vLUQ4w
Purchases made through some store links may provide some compensation to Linus Media Group.
Discuss on the forum: *LINK TO DISCUSSION THREAD*
GET MERCH: www.LTTStore.com/
SUPPORT US ON FLOATPLANE: www.floatplane.com/
LTX EXPO: www.ltxexpo.com/
AFFILIATES & REFERRALS
---------------------------------------------------
Affiliates, Sponsors & Referrals: lmg.gg/sponsors
Get Private Internet Access VPN at lmg.gg/pialinus2
Get a Mech Keyboard: geni.us/RecNBTI
Nerd or Die Stream Overlays & Templates: geni.us/s8hBAgR
NEEDforSEAT Gaming Chairs: geni.us/needforseat
Get a Displate Metal Print at lmg.gg/displateltt
Use code LINUSMEDIAGROUP on Epic Games Store: lmg.gg/kRTpY
Get a 30-day free trial of Amazon Prime at lmg.gg/8KV1v
Our Gear on Amazon: geni.us/lmgamazon
FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
Twitch: / linustech
FOLLOW OUR OTHER CHANNELS
---------------------------------------------------
Techquickie: lmg.gg/techquickieyt
TechLinked: lmg.gg/techlinkedyt
ShortCircuit: lmg.gg/shortcircuityt
LMG Clips: lmg.gg/lmgclipsyt
Channel Super Fun: lmg.gg/channelsuperfunyt
Carpool Critics: lmg.gg/carpoolcriticsyt
MUSIC CREDIT
---------------------------------------------------
Title: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro Screen Music Credit: Approaching Nirvana - Sugar High / approachingnirvana
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 lmg.gg/fxHYK
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 lmg.gg/Q9yyQ
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 lmg.gg/8upii - Věda a technologie
Grew a beard and now voice is starting to crack. Our boy is finally hitting puberty; so proud!
He grew his beard after getting roasted by other tech CZcamsrs on that. Lmao. It was a filmed event.
The likes are 69
@@chevalierdeloccident5949 ...
pissed myself a bit on that comment, nice one mate
@@chevalierdeloccident5949 link pls!
* Multiple heatsinks fall off *
"Alright, let's try and really toast this thing."
Were those just regular thermal pads? They are not sticky at all. They should send double sided thermal tape with it.
@@1337Ox so you can put even more stuff between a cpu/gpu/whatever surface you're trying to cool and a heatsink? You know that despite their names all thermal compounds are there only to fill the gaps between two surfaces and adding more thermal compound/thicker thermal pad/thermal tape is only going to make cooling less efficient? The best solution would be if cooled surface and heatsink were perfectly flat so that there would be no air, no thermal compound between them so they would touch each other 100%, but it's not possible to mass produce right now.
@@1337Ox kinda defeats the purpose of a thermal transfer layer if you're going to put glue on both sides of it. Thermal compound should be called thermal grease because that's what it is, it fills gaps between both surfaces. the thermal tape that they use for VRMs and M.2 drives are really not even that great at being thermal transfer materials, they just squish the stuff down
Yeah it would have been nice if they had checked the memory and vrm temperature before and after the cooler was installed.
@@morthias666 @PsychoLucario guys, look up thermal tape. it's double sided tape made to withstand higher temps than normal tape and is good enough at heat transfer for these little heatsinks. it also is thinner than thermal pads and thus would likely have better thermal conductivity. it's the go-to method to attach vrm/vram heatsinks for aftermarket coolers. literally any Arctic Accelero, Morpheus, Alpenföhn Peter, Gelid Icy Vision, Deepcool VGA etc of the past 15 years has used thermal tape for this.
I just using the Raijintek Morpheus 2 on my Vega 56 since 2018, and not a single heatsink dropped :D The thermals decreased from 85 to 60 Celsius, and bye bye blower cooler :)
No
I bought one for my vega 64 because I wanted to use quieter fans, and all my heatsinks fell off and it's sitting in a box on my shelf... In the end I just ended up using the cooler it came with (not the blower model) and some upgraded paste, still not the desired result I can hear it sometimes under load but that's easier than making this thing work just to use Arctic P12 PWM fans...
@@RandarTheBarbarian I don't know, sometimes I check my card, its still fine, no problem since the install. Maybe too lucky this time?
Imagine using a Vega 56 🤢🤮
@@sainttrill1165 why? It's more powerful than a 1060 almost a 1070, nothing wrong with that. And 64 puts me within a couple percent of a 1080 and getting some decent games with it was neat value
“PCI express stœräje” nice job Linus. 7:40
Speech *100*
He said it correctly. Did he used to NOT say it correctly?
@@markjames8702
I think they’re mocking the very high voice crack in the middle of "storage"
I'd also be curious in seeing how this performs compared to just having the Noctua fans strapped to the stock heatsink of the Strix card.
That's a pretty common Ncase M1 mod, and it seems to work well for the people I've seen do it.
I did something similar with a reference Palit 2080 Ti Gaming Pro card and slapping a pair of Arctic P14 fans to it on a PCIe bracket, it runs much quieter but overall similar temp/boost clock performance compared to stock fans. But just being near silent is a good upgrade and to me that is what you mostly pay for with the higher end cards like the ASUS Strix.
@@kasakka yeah I've done it before with a 1080 and it worked well. I'll probably do it again with my next build as I'm planning a build-on-a-board style build and I'm intentionally making it look janky af
depends on the size of the heatsink. i tried that with two 92mm Noctua fans on a 1080 ti mini from Zotac. didn't work well, but it was silent at least
I just did this to my 5700xt and saw a massive die temp difference between the Sapphire Pulse cooler and the Morpheus. I posted it on the LTT forums.
'Oh yeah, smells like generic.' - Linus 2020
its not really a thing i usually cringe on tbh
- My friend when he eats my snacks that I buy from Aldi
lol
Generic smells strangely like Tuna
They've replaced him with the deepfake!
Wonder what's going on here, as my Morpheus II included thermal tape actually held heat sinks really well.
Defeqel he just dry wiped all the old thermal paste off instead of using rubbing alcohol to actually clean everything off
@@RaceboyYT no he didn't not
This channel are not serious and are incompetent.
same
@@RaceboyYT he did both dumbass. He specifically stated he likes to do a dry wipe before the wet wipe. Also the memory chips didnt have any paste on them, what are you on about?
Linus: *logs a bunch of data through several programs*
Also Linus: *doesn't actually show us the data*
Aight.
Add to that no measurement of fan noise, and tinkly soundtrack for video prevents us from hearing whether device makes unacceptable noise.
@@billraty14 Noctua fans at 600-700rpm are probably close to inaudible.
Did you mistake this for a tech channel?
No this is a showcase channel like unboxed therapy.
yea i was expecting the see the data myself but oh well, what you gonna do? 🤷🏾♂️
Given that the heatsinks fell off and it's a niche product, it's only to be expected that this was more of a "cool tech" video than an in-depth review. That's what LTT does for a lot of things.
I honestly think that the industry has to rethink the GPU mounting/cooling a little bit. We probably need the GPU heatsinks sold separately on higher end cards and have some semblance of standardization like what we have on CPUs.
That would be interesting, cpu cooling solutions seem to always be more efficient for some reason
@@grod5998 probably as many people don't want to go to the trouble of replacing a gpu shroud as it will likely be "good enough", but a stock cooler for a CPU is stereotypically not good _enough_
Will not happen because the GPU card manufacturers love selling coolers that cost 20 to 50 dollars for 100 to 300 dollar markups.
intel: if you insist, let me slap the same shitty cooler you can use on a i3 on an easly overheatable i9
Yes, please.
Considering how he lost all those heatsinks, he should have shown us what memory temps look like... at least with a thermal reader
Can he get at them with all the stuff on top?
@@visilyrom HWiNFO64 has memory temp readings.
I own a reference Vega64 and the Morpheus 2. I can tell you thermals on the fets get bad because the heatsinks don't fit, just like the problem Linus had. I tried some of my own heatsinks of various sizes and the card just sits way too close to the board for any to fit. On the V64, there is the option of using the OG plate that comes with the blower, and that seems to be the best option, but you also have to cut it to make it work.
In the end, I set the fans to a high static (75%) and just don't OC the GPU as much. Stays stable and is WAAAY more quiet which is what my main goal was. That blower sounds like a freaking jet engine, especially if you go past 50% speed on the fan.
@@dfuebermann1 that's why you get the accelero 3 xtreme, not the morpheus
I was checking for som info like that when researching the NZXT Kraken G12, where a lot of test (Gamers Nexus and Jay for example) came to the conclusion that the temps are probably fine even if the ram and power delivery is just hit with the breeze of a single fan even without any heat sinks. That is though with the info in mind that those chips are rated for constant load at temps around 90-95°C.
The Kraken doesn't even come with any heatsinks für the PCB. Just a 92mm fan that hopefully hits everything.
I guess when in doubt just get at watercooling backplate. That might help.
Can I just say, that this video is one my fav just because of the shot on 0:34? Kudos to the camera operator there
Ya that was super clean .
It's just zoom, bro.
@@Heliocentric nah bro, it's not just zoom, you cannot do this shot by zooming, there is camera movement in this shot.
@@steliosmouratidis3829 bro, you obviously havent ever done professional video photography. I can reproduce the same shot with macro and a tripod.
@@Heliocentric so no zooming, exactly what I said. And also, I know my self around cameras and lenses, I mean I work for a major company in the field.
You know what, I think that loud noise gives my lifeless room life
And as a bonus when you get married you'll barely be able to hear your wife too.
The fan noise drowns out the coil whine for me.
The screams of my blower card fill the lonely silence.
0:00
"Do you cringe?"
At least once a day, Linus.
did somebody say cringe?
around 1:00pm EST every day
@@jdwmyt r/beetlejuicing
Every time I see linus
@@cool_bug_facts the irony
Me: fires up cities skylines in 4k
My single fan mini 1060: aaaahhhahHaahHahahaahhaaha
Me: fires up MHW on my RX 560 at bare minimum settings
RX 560: I'm not even gonna bother
lol thank god I got the dual fan zotac amp version, extremely quiet and doesnt go above 75c
My GPU speed rarely goes over 40% and the temperature when gaming is around 60. Why do other GPUs heat up this much?
You guys have gpu's? I'm stuck with Intel 8th gen integrated graphics 😨😨
@@LSK2K Probably because your GPU is of a lower level (like mine) or it could be your environment is properly refrigerated so your GPU doesn't heat up enough thanks to the fresh air coming in.
Nice to see you guys covering this product. In many forums this is the way to go if you want to improve cooling performance of your graphics card.
I removed the shroud and strapped some 120mm fans to my stock heatsink. Load temps went from 70c to 40c.
Did you need an adapter to plug them into the gpu or did you use a case fan header on the mainboard?
@@ThePiprian Bro case fan, maybe get a lil extra power to the GPU since the GPU does not power the fans anymore.
Right? I was thinking the same thing from the begining: why to buy another cooler when you already have one? Just take away shroud and put bigger ass fans.
@@NoneRain_ thinking about doing the same, which fans did you bought and for which gpu?
rtx 2070 super ventus here, terrible cooling..
"This doesn't cost and additional $70-80 over Founders edition" When talking about the strix model.... The founders card launched at £1099, the Strix launched at £1499, it was a £400 premium for that 3rd fan.
KillerFugu you’re not just buying performance. You’re buying a brand
@@kman1898 To be fair, You're not buying performance. The FE usually outperform the Strix, because usually the Strix is a cutdown PCB with a beefier cooler. Go EVGA or Galax if You want performance.
@@valchanovgeorgi I have the strix, can confirm IT IS NOT cutdown at all- Fe is however normally better due to binning
I'd like to point out that the extra cost is not just the fact that it had an extra fan, but it also has higher boost clock compared to founder's edition which was rated at 1650 MHz at gaming mode and 1665 MHz at OC mode. The truth is both the founder's edition & ROG Strix both perform higher than rated clock when i tested. Founder's edition reach 1675 MHz on boost mode at 100% power (260W), and 1811 MHz at max power (123%, 320W), where as the ROG Strix reach 1767 MHz at OC mode at 100% power (260W), and 1876 MHz at max power (125%, 325W).
In these conditions the Strix have lower temperatures at 63°C default setting/standard fan speed, 59°C at max power & max fan speed, compared to founder's edition which reach 74°C standard settings & 66°C at max power & fan speed. It also perform 4-5% better in both standard & OC + max power output in 3d mark fire strike ultra graphic benchmark testing..
If you want to spend an extra to buy different cooler then yes, buying the founder's edition is better, but if you want stock vs stock pure performance & better cooling ROG Strix is the better option, plus it's got a cool "Aura Sync" RGB lighting.
@@jovanyv5972 Yep, just checked - the STRIX 2080 ti actually uses a similar PCB with a bit more power stages... And for £400 extra, they'd better do... However, As I said - usually they do not - e.g. 5700XTs... those were horid!
5:45 "What am I looking at here?"
You're looking at cross-compatibility with multiple different GPU layouts. Which is something you brought a lot of attention to just 3 minutes ago in this very video. :)
"It's good to do a dry wipe before a wet wipe to pull off the majority of the goop" I apply the same technique wiping my bum.
... do people use a wet wipe of their ass?
Linus should revisit this with 30-series GPUs, it may get interesting.
Seeing a heatsink on the chokes and none on the exposed VRMs... I physically winced...
I stopped the video and search a comment of this... Now play the video
you mean you cringed 0:00
Imagine not having your VRMs running at 105 degrees
@SaltinbanK peak temperature not is the recommended max (normally 115c) and not is the software limited temperature for VRM (normally 105c)... When the VRM reach this limited temperature the board down his speed or not reach "boost speeds".
You would think someone with so much tech and PC experience would know the basic anatomy of a GPU.
At this point Linus’ advertisements are so smooth that I WANT to watch it every time 😂😂😂
HA! I actually love that it is so obvious that he is about to do the sponsor spiel that it is easy to tell where I need to hit fast forward and when I can just quit watching the video. :)
They do the ads the right way
I always see it coming and skip it before he even say the brand, but had rewind to see the smoothness you talking about
At this point I'm buying the products
.
.
.
.
Not really
It has been my pre-sleep go to channel for like 2/3 years now 😂😂😂😂
I'd love to see more demos of quiet setups.
I recently picked up a PC tower for the first time in years after watching tons of LTT videos and choosing what specs I think I need for my use case, and although it's an old-yet-powerful PC, I'm astonished at how loud it is. I got it yesterday and after a couple hours spent next to it I couldn't wait to turn it off just to have some peace and quiet again. Last time I had a PC tower (in 2017) it had a nice low whisper hum at idle, and only got noticeably loud when it was under load. The one I now have sounds like a window A/C unit when it's just on idle.
Noise consideration is the one thing I don't know how to shop for (translating dB ranges to real-world experience) when researching components, so these test videos are really helpful.
Little did Linus know..
ASUS would actually make this a year later.
And next would be to have GPUs and CPUs share the same heatsinks, by simply having those heatsinks which have a gap in the middle, and have them offset by a bit to make them both fit in the case perfectly.
Yes but not for the rtx 3080 or 3090 :((
What do you mean? I can't find anything on the internet
@@Dj_Frixz asus noctua collab. linus did a video on it.
@@samsowden ah ok i thought it was a custom cooler
Like Linus concludes, I think a better idea is to go for an expensive card with a HUGE heatsink like some EVGA models and then go a step further. Remove the stock fans and use 2x 140mm fans instead. I'm very surprised how effective that is. Edit: You keep the stock VRM cooling that way and can put the original fans back on just fine. In the meantime during this heatwave, GPU temps are around 77 at full load with two 750RPM Noctua 140mmfans which is audible but still very quiet, for a 2070 super.
didnt expect to see you here Niels
Is it as quiet tho?
@@fixture3434 A pleasant surprise that's for sure
@@mrloominati3097 hell yeah brother
@@IamLegendAnon noctua is real silent
"or pcie sToRaGe" that voice crack was amazing. 7:39
I was wondering if anyone else heard it
@@wantse-rita25y.oopenmycana50 Filthy spammer. I see CZcams's spam detection algorithms are failing again.
I did something similar with an Arctic Accelero Extreme 3 a year ago on a superclocked 1080 from EVGA whose fans were constantly clicking and past warranty. I had such a surprise on the silence, lower temps and greater overclocking. I never hear the graphics card anymore and a bonus is the card's coil whine pretty much became inaudible. If you have a perfectly good but older card out of warranty that has mechanical issues, try something like this. It takes time and patience but worth it. FYI - Arctic's kit was nicely outfitted with accessories like heatsinks, paste etc..
7:40 voice crack hehe 😂
"Never trust double sided thermal tape", Now THAT'S a tech tip!
When I used it on my morpheus 2 its was SOLID, I had to use force and twisting to get them off. This was a half ass attempted at a review.
@@jsharp9735 I've tried it maybe 20 times and it's worked like twice for me lol. It's just not a good idea.
@@SirNickyT user error, just like linus video ;p
@@jsharp9735 It's all in the prep work. Get that oil off and everything CLEAN. The ones I've done in the past I could pick the card up by the stick on heatsinks. It really sucks that Linus has to half-ass this because haha goofy video for views and likes, and not just show how to do it correctly.
initial thoughts: That is a MASSIVE heat sink
Later thoughts: I want BIGGER
Does it help if I put this on an XFX RX580 (8 GB)? I ask because my video card already has two large fans and the heatsink covers almost the entire board.
lol i love how colin knows were everything goes without even looking
@RITA 25 y.o , I WANT SЕХ !!! OPEN MY CANAL !!! go to heeeeelllll
@@stefane.3169 just report man
@@Kionum done
This is what i did long ago and also the thing i asked of aftermarket coolers to make, a big heatsink with 2x 140mm fan support. It fixes all the sound issues normal coolers have and allows you to overclock the card without a problem.
This is a really good solution too for micro ITX builds where water cooling is impossible. I've been using an Arctic air cooler with 120mm Be Quiet fans in my Node 202 build for a few years and it's been the quietest setups I've ever had with no compromise on space or thermal throttling.
Also after watching further into the vid - the Arctic coolers VRM coolers didn't have any issues with staying on the board or interfering with the cooler itself. And I've only had 1 of the small heatsinks fall off after years of use.
No offense, but we barely got any actual data from this video. Fans are "barely" spinning -- what RPM exactly? No RPM to temp chart? How were the VRM temps after all the heatsinks fell off?
10:23 RPM... just 3 seconds after he said "barely spinning".
Pay attention.
Its a shitily designed product, so who cares besides you?
@@TristynRusselo Yeah but he made that number up, there's no way they were spinning at 600-700 rpm during that synthetic benchmark, my guess is it was around 1200. He didn't actually measure it.
@@QuantumBraced So, your argument is: "You didn't provide an RPM!", but when shown that he did, "I don't trust your word!". Why are you even here?
Agreed. I think this cooler could probably beat the strixx card on thermals and noise if they actually did some tests.
@@erathemonologuer1454 It wasn't '"his word", it was a causal guestimate based on his finger touching the fan blades after the test. Not exactly scientific. I mean I don't expect much from LTT in the way of data, you gotta go to GN for that, but still, give us something.
This video should have been a comparison between a card with a good after market cooler, Morpheus 8057, Arctic Accelero, and just strapping a couple Noctua fans to the existing heatsink.
Exactly. Also I think accelero is much better than this thing 😬😃
Bring it up with GN
@@nickfury999 the fact that the Accelero is almost the defacto standard for SFF computing mods kinda points towards it being better.
@@BrumBrumBryn more to do with the size and shape,there are bigger coolers that won't fit as well
I did a fan mod on my asus pheonix rtx 3060 V2 recently and ffs that is a difference in loudness like night and day. the stock fan of the phoenix runs at 1600rpm min and 3000 rpm at max but never got higher as 1700rpm while playing games or benchmarking. But those 1600rpm was so shockingly loud. I removed the cover of my gpu and placed one noctua nf-f12 onto the heatsink, plugged it in one of the case fan headers on my mainboard and controlling it via argus monitor. In idle it runs at around 600rpm at ~35°C and while gaming or benchmarking I set them with a custom curve to 1300rpm and it never goes over 60°C gpu temp and 70°C hot spot.
Luv it. And it's so quiet. So unbelievable quiet.
For anyone looking to try this, I'd personally recommend the Arctic Xtreme IV if you want to avoid those little heatsink thingies.
I installed the Morpheus II on my Zotac Gtx 1080ti Amp Extreme and I couldn't be happier with it. I, too, had a moderately difficult time getting the aluminum heatsinks to fit properly, but I also actually installed mine on the VRMs as well as the mosfets and they haven't budged since installation more than six months ago. With the new cooler I was actually able to push the factory overclock even further while dropping my full load temps by about 20°C on average. This removed any and all thermal throttling issues I had while playing competitive games on my 240hz monitor. Absolutely worth the upgrade for me.
No air GPU cooler I've ever seen even comes close to this performance.
I have the same gpu, and im curious why you would upgrade the fan setup, when their three fan setup already performs fantastic. I never see above 72c. And thats at 1440p 100 fps +
@@theberch I now never see above 50°C no matter the load, have reduced fan noise to near silence, and am able to push the overclock even further than I could with the stock cooler.
That's why.
@@Thrashman138 Dont believe you. Let's see you running 2k textures, pushing 100+ fps or even a benchmark and see 50c. Water blocks don't even do that. Anyway, if you want to lie, at least make it believable. If your doing 1080p 60fps, I might believe that.
@@theberch I don't care. Move along and stop wasting my time.
@@Thrashman138 I can confirm your results are plausible. I use Arctic Accelero Xtreme on my non-ti at 250W and it's the same picture. I was looking at the Morpheus but for me this cheaper option coming with fans included hit the spot. I used liquid metal though, so that makes up for the missing heatpipes and lower grade fans. Furmark maxed out 1440p at 28°C ambient temperature (yeah it's warm right now): 47°C Tmax full speed fans; 52°C with my low noise curve. Thermaltake Core P3 on desk, so I want it really quiet.
I used the Morpheus II on my AMD Vega 56. I went from usually settling into the low-90 degrees with fans pinned at max, to near silent running at 60-70 degrees max, overclocked. I'll be using Raijintek coolers from now on, considering how insane my results were. *If I can find a cheap Founder's Edition card, or compatible aftermarket card*.
That being said, I had the same problem with the tiny thermal glue heat pads falling off. I ended up having to buy some aftermarket heat pads off Aliexpress, so factor that into a purchasing decision.
Do you think the cooler could be easily attached to a Radeon VII? I waited forever for Raijintek to make a version for the VII.
Best thermal stickers are the ones I got from ID Cooling. Seem to work best if I took of the backing but let it be exposed to the air for while before attaching.
I just attached Arctic P12 fans on my Red Devil Vega 64 with zip ties. Worked a treat
AmusiaPrussia how are your thermals looking? Am about to do the same with my Vega 56. oh and did you repaste it before?
Thank you Linux for making this video, I really needed it.
This video is actually a perfect introduction into what can happen if u build a GPU cooler.
I would highly recommend a small tube of thermal adhesive (not just paste!). even then its not really easy, but with a bit of patience u are good to go 👍
I would highly reccomend giving the Arctic Accelero Twin Turbo a shot. I cheaped out on my first gaming rig w/ the single fan Gtx 1060 and constantly thermal throttled..
Replaced the stock cooler with the accelero and the card literally never thermal throttles even when OC'd.
I upgraded to the 5700xt last november. Safe to say i didnt cheap out on the version I bought this time 🤣
But how bout those instructuons though 🤣. The thermal pads had me stressing . But the end result was ridiculously good. Took my idle/load temp down like 20-30c, not exaggerating. I should have made an install/test video.
I put an Accelero on my 1080ti, no regrets at all. has been working like a champ for the last year on that rig.
@@vatsalverma7036 i cant dislike it twice
Accelero Mono Plus which is even cheaper cools my Asus GTX1070 Dual just fine with maximum temperatures of 66C. Just slam an Arctic P12 with zipties on it and boom, you have dead silent GPU.
@@dzenandervic1066 you can dislike the comment, and the video itself
4:26 "Where the heck does D go?" - Linus 2020
First time guys be like
Linus sex tips
@@qdnt7828 meh
L I N U S E X T I P S
Hello!
What do you think better setup for rtx 3080 3*92x15mm 2200rpm or 2*120x25mm 1900rpm?
Now i have 2*120 1500rpm noctua fans on 1080ti + VGA to 4pin connector and it has proud sound of noctua, but some less performance that stock Palit Jetstream on 90mm full rpm
I did something similar to my now sold off Zotac GTX 960. The fans stopped working and there were no options to fix it so I just taped two cheap 80mm fans on the card and the temps were incredibly better than it was before.
Instead of buying a blower style, just by an aftermarket oem with a good cooler, time and money saved.
Doesn't necessarily solve the noise issue at all. The FTW3 cooler on my card is great, but also far from quiet. I don't mind it, because when it spins up it actually means some good stuff is happening.
A lot of Prebuilts have blowers. SO for those people to upgrade this would be good.
@@17Codiferus You might just have to adjust the fan curve, if the cooler is really good, it will still work fine with lower fan speed
but what about the joie de vivre of the blower???????
@@simonfrohlich7766 It's as tuned as it's going to get. A 1080ti at 100% load only gets so quiet, no matter how good the cooling solution is. I don't really use it for gaming (much), and with the kind of workloads I hit it with I'd rather it stay as cool as possible rether than as quiet as possible.
lol this is Verge level of PC building, I like the part where he says he is sticking the VRM heat sinks on but then sticks them on the chokes where they will not cool the VRMs lol
NOW we see the truth about LTT!
@@stoneymahoney9106 It never was different though?
Their videos aren't enthusiast level and never will be.
They're conpact and give you basic information.
was excited to see it at first but after what I saw I could have not agreed more... you test the thing with everything Linus... shake it more maybe it will stick better
@@Erksah68 Whooooooooosh! (Edit: Also, doing something dangerously wrong on camera is dangerous, end of discussion)
@@IzzyCraft While the inductors and capacitors are indeed part of the VRM circuitry, they generate negligable quantities of heat. MOSFETs on the other hand will easily go well over 100degC under heavy load, and NEED that cooling. Linus showing that cooling configuration (and he really should know that's wrong with all his experience) and NOT mentioning to his audience that this isn't how you're supposed to do it is a touch irresponsible, even if some of us do get the joke.
I seem to recall Jay doing something similar and spent an entire follow-up video fixing his mistake and explaining it? (something like that)
Ok, but in which slot did they attach the fan's calbes? just a random spot? wouldn't that make it less efficient? like, the gpu is at 100% but the fans are running at the same speed. I tought about doing the exact same thing with my alienware aurora r10, but there isn't a precise spot for "gpu fans", i don't know what to do, please help!
I'm running a Morpheus 2 on my 1080ti and I can't recommend these giant heatsinks enough. They're fantastic, albeit a little unwieldy to mount.
When you realize he didn't put the heatsink on the MOSFETs
Rip
Yeah I noticed that as well he put them on the choke's, and then runs furmark essentially a power virus program!! 😲
The chokes are like "thanks.... I guess?"
@@stoneymahoney9106 "I think I forgot something. It's not that important if you forgot it. Yeah your right." *MOSFETs sitting in fire crying*
it doesn't even matter because it woulda just fallen off xD
Thanks again for early forum access LMG!
What? So why does floatplane exists
Tryhard
Plane go ✈️
@@oleksandrchubras9549 float plane gets it earlier obviously but forum has been getting it 5-10 or so minutes earlier lately
@PLK boat go
I recently did what you did sometime ago and cable tied 2x 120mm case fans on the the standard heat sink on my MSI RTX2070 Super Ventus GP and ahhhh silence is golden.
Blowy-matron noise is like an engine revving up. I enjoy it.
"When Linus casually draws on GPU with marker"
Lmao
@Tejas Ravishankar ok?
After 5 hours you have seen no one has commented so you have added a comment yourself for self-satisfaction, (i will do the same if no replies for this )
That moment when he puts the heatsinks on the capacitors and inductors. F :'(
(Tbf, I looked up the instruction manual and the picture is very misleading)
RIP powerstages. 2020-2020
yep, I too noticed that right away...
N
I was searching for this comment, knowing that I'm not the only one noticing :D And yes F to those powerstages
@@sonacphotos thank you!
capacitors and inductors when you touch them: adios
I have a similar setup for my GeForce 8800 GTS when I built my old system back in 2008 with 2 x SilentX 92 x 38 mm fans. I didn't use those double sided tape heatsink cuz they just fell off. The card had been working for 10+ years until I bought a new system, but it still works now, so it's not crazy at all to do this.
I remember using one of these Morpheus coolers on a Vega64. Never got it to work well so ended up just putting some quality thermal paste on the die and replacing the thermal pads before sticking the stock cooler back on. Even that helped somewhat with the Vega...
did you clean the dust off the memory chips and mosfets before installing the double sided thermal tape? dont think so
Why would there be dust on them??? They're already covered with thermal pads before removing them
@@yashpashar4758 Proper surface cleaning is very important for any adhesive or paint application. You can't expect good bonding if there is some substance between the 2 things you want to bond together. It might not be "dust", but it could be a thermal paste residue, grease etc.
@@yashpashar4758 Even worse, the adhesive won't stick to the oily grease from the thermal pads. You can tell if you ever worked with PCs
Doing so would have doubled the amount of thought put into the entire video. That does not make the work/reward, cost/benefit worth it.
@@tacomaken3338 Yeah I never said what they did was right was just saying that dust isn't the issue here xP this really was an awful video ngl
"Where the heck does D go?"
Linus Sebastian, father of 3
😂😂
I use the Accelero Xtreme IV. Dropped my FE 1080Ti down from 84c and the noise of a hoover, to 55c without the fans spinning up (as in from their lowest speed). A few weeks later it now hits 70c max, but fans still don't really speed up. Massively helped my tinnitus!
That probe lens shot is sick!
I have the older Morpheus 2, and it's been great on my GTX1070 for the last year or so, and I also didn't lose any of my heat sinks, but it also came with individual sinks for each VRAM chip, & i used some longer included ones on the VRM with great success, tho I'm sure it helped already having a better thermal tape than what was supplied. I plan to move it over onto my next GPU in the next couple years.
Seriously dont follow this linus installation. That mosfets tho 🔥
yep, i'm kinda glad that heatsinks dropped... and at same time really worried.
hm... how do you connect/control the sweet Noctua fans once you replaced the whole stock nVidia cooling and fan apparatus? like, there's not going to be some proper connector on the bare nVidia PCB, so how do you make sure that those two new fans spin up and down with the rise and fall of GPU temp?
Do you just plug the fans in the motherboard? how does it change speed according to gpu? the fan header on the gpu is smaller than the motherboard
It seemed like you may have installed the heatsink onto the chokes rather than the actual VRM itself, unless I just didn't see that correctly.
There were two slim copper heatsinks, one on the chokes and one on the mosfets. But they fell off anyway so...
@@georgf9279 Yeah, but my point is that the chokes weren't meant to have a heatsink, that heatsink was most likely meant to be directly connected to the VRM. I could be wrong.
@@dgraves14 Trying not to repeat myself: There were two copper heatsinks, one of them was on the mosfets (already). Unless you are somehow able to put two heatsinks in one place, there is no other sensible choice then to put the second one on the chokes.
Mosfets, or their more integrated brethren, "powerstages", are only one of the parts that make up a VoltageRegulaterModule. The chokes are also part of the VRM. Both need cooling the powerstages more so, but the chokes aren't to be neglected either.
7:40 ‘...PCI-E stOoOrage...’
That voice crack tho
Hi what Thermal pads should i buy to replace the ones on a msi 1080 duke im unsure because when i look up thermal pads they all have different thickness and not postive what to buy is going to tick bad??
Got to wonder how many times these experiments have caught fire when left unattended.
"Hmm.. Looks neat, maybe I should replace -"
"And a heat sink fell off"
"..."
"Aaand there goes another one!"
"..Abort! I repeat, abort!"
And another one down, and another one down. Get stick bugged lol
Hey, hey
You know what song
Get in the groove, babe
Steve walks warily down the street
With the brim pulled way down low
Ain't no sound but the sound of his feet
Machine guns ready to go
Are you ready? Hey, are you ready for this?
Are you hanging on the edge of your seat?
Out of the doorway the bullets rip
To the sound of the beat, yeah, yeah
Yeah, yeah, sing it!
(Another one bites the dust)
One more!
(Another one bites the dust)
And another one gone, and another one gone
Another one bites the dust
Hey, I'm gonna get you too
Another one bites the dust
How do you think I'm going to get along
Without you, when you're gone
You took me for everything that I had
And kicked me out on my own
Are you happy, are you satisfied?
How long can you stand the heat?
Out of the doorway the bullets rip
To the sound of the beat
Hey, hey, hey
Another one bites the dust
(Another one bites the dust)
And another one gone, and another one gone
Another one bites the dust
Hey, I'm gonna get you, too
Another one bites the dust
@@Heilzmaker
Riding in the bus down the boulevard
And the place was pretty packed (yeah!)
Couldn't find a seat so I had to stand
With the perverts in the back
It was smelling like a locker room
There was junk all over the floor
We're already packed in like sardines
But we're stopping to pick up more, look out
Another one rides the bus
Another one rides the bus
Another comes on and another comes on
Another one rides the bus
Hey, he's gonna sit by you
Another one rides the bus
There's a suitcase poking me in the ribs
There's an elbow in my ear
There's a smelly old bum standing next to me
Hasn't showered in a year
I think I'm missing a contact lens
I think my wallet's gone
And I think this bus is stopping again
To let a couple more freaks get on look out
Another one rides the bus
Another one rides the bus
Another comes on and another comes on
Another one rides the bus
Hey, he's gonna sit by you
Another one rides the bus
Another one rides the bus
Another one rides the bus ow
Another one rides the bus hey hey
Another one rides the bus hey-ey-ey-ey
The window doesn't open and the fan is broke
And my face is turning blue (yeah)
I haven't been in a crowd like this
Since I went to see the who
Well I should've got off a couple miles ago
But I couldn't get to the door
There isn't any room for me to breathe
And now we're gonna pick up more
Another one rides the bus
Another one rides the bus
Another comes on and another comes on
Another one rides the bus
Hey, he's gonna sit by you
Another one rides the bus
I bought one way back for my GTX770 because one of the stock fans was dead. As I remember it I didn't have any problems. Maybe quality went down over the years?
I would like to see this compared to Arctic's variant of add on GPU coolers and NZXT's GPU AIO mounting plate with a few common AIOs
If noise is your key criteria, we already know it's better. Doesn't use noisy undersized fans like AC and has a large heatsink... As for AIO's, they tend to be noisier unless you go with a double or triple rad - and then you're better off with a custom loop.
I suspect the Accelero II or IV would show much better results
My Arctic Accelero knocked 30 degrees off of my RX 480 and is now silent. Amazing bit of kit.
@@ed-te1fp I morely think it's a luck of the draw with AIO's. I use the Kraken G12 bracket with a completely unbranded Asetek AIO that was from a prebuilt in 2016 and my 1080 and AIO is nigh silent only reaching 50 degrees C with an overclock to 2012 MHz stable.
@@BrumBrumBryn I don't think your assumption is correct. A huge FOUR slot cooler, which is what the RanjainTek is, SHOULD be better than the smaller Accelero's. In addition, you cannot easily customize the small fans the Accelero's comes with and you cannot run them slow. In my system, not a single fan runs about 1000 rpm and my 2070 RTX Super is cooled by two high-quality Noctura 900 rpm 120mm fans on this heatsink and is very quiet. I did my research before going for the RaijinTek over the Accelero's, and am pleased with the results.
yea, ok but what about the Raijintek Morpheus 8057 on the strix card? are there any temp differences between the stock strix cooler and the Raijintek Morpheus 8057? because the stock cooler is very loud under load...
What do the fans connect to? The motherboard or somewhere in the gfx card? If it's on the motherboard then do the fans turbo up at the appropriate GPU temps?
I did the same thing with the morpheuse 2 on my gtx 1070 with 2 noctua 12x25 and for some reason my heatsinks are still glued to it 2 years ago so i dunno what they are doing.
7:39 nice voice crack Linus I hope puberty does you well and turn you into a strong handsome young man
so, if you are running a blower style 2080s would this be a good choice? i know another company makes an AIO bracket for it not sure which path to take.
This is the HSF I used to replace the blower fan on my Vega64. Works great, but I find the clips to be rather flimsy and not very secure. Had to find an alternative method for positioning fans towards it.
I've actually been hunting for this solution.
I was just looking at the no longer existing scythe Musashi.
Got one on my Sapphire HD4870. It was awesome compared to stock cooling although one of the fans died after 2 years
Take a look at Arctic's GPU coolers as well. Watching the heatsinks fall off the VRMs does not give me much confidence in this product.
Prolimatech also make the Mk-26 which uses twin 120 / 140mm fans, i had one on my 7870 and i could almost run it passively
Take a look at the NZXT Kraken G12 (or G10), it's hybrid cooling
I run the older Morpheus II (looks like literally the same thing but nickel instead of black) on my 1070 FTW with two Noctua NF-A12's on a fan header adapter/splitter and it runs so much more quiet than the stock already pretty decent cooler. OC'd the snots out of it and it's as quiet/cool as stock at stock settings.
I absolutely LOVE my Morpheus. My room has to be like 85 degrees (F of course) in order for my 1080ti to hit 55C while overclocked.
Why would you use farenheit for your ambient temp and then use celsius for your gpu :PPPP
@@viktorkarlsson5998 My guess is RR watched comp. temperatures (which is usually C even in us systems) and has a temp sensor in their room with farenheit units on it.
I never really expect to buy anything I see in these videos, I just click because I know you and your gang are going to do goofy stuff and make me happy
would it work if I just strap 2 120mm fans to my gpu?
got a "GTX 1080 palit super jetstream", it has a huge heatsink but only 2 100mm fans
are there any connectors available so I can attatch the fans to the GPU header directly?
the noctua fans draw very little power, so I think it should work fine in that regard.
I'm waiting for Linus to make a video called "robbing the international bank of CPUs"
♀️🚩
steve watched this video and seen the vrm cooling and instantly got a few grays lol
I built a blower with a noctua 140 mm IPPC industrial around the original card+heatsinks. Works a treat! I needed to solve a problem wih CPU fan ingesting hot air from GPU that is too close.
i really would be interested in where to put the fan 4pin pmw connector at?! has there been any connector on the graphics card?
7:40 are we just gonna ignore that voice crack
yes
Who cares
He’s an expert presenter he just straight up kept going
Yes
We didn't, the comments are fil’ed with people like you who said it 2 month earlier.
me: *making online homework that is already 10 hours late*
Linus: * launches a video *
me: aight ima procrastinate
if you get urself a laptop with sad battery life, then it'll force u to do the homework first or it'll die from youtube videos running it way harder than most homework sites..
you could also be like most people and actually be able to tolerate using the machine with the charger which i cant stand. (i use it in bed and having wires on my legs makes me very uncomfy)
@@DistantThomas i don't have a laptop lmao
just using my i3 3rd gen desktop pc
Went on ahead and bought this and it came, nice look and everything but upon screwing in the M3 into the clips, its not fastening? What could be the problem? without the clips they go in perfectly fine but when use the clips they are not tightening one bit.
This man cant quit !
Really nice to hear Linus actually giving tips and sharing wisdoms from experience along the way. Not saying he doesn't do that enough, but it's great when a channel continues to live up to its name, no matter how huge it gets. Thanks LTT.
*The wisdom of dropping*
You know what else weighs less??
-My wallet after buying everything you suggested
*Before
Poor pero playar like me
@@johnlionel3166 it is after
bc I have ridge wallet!!
the compact RFID blocking plates put wallet bulge down!!
~.~
"Cost effective"
@@aggy69420 Riiiiiiiidge Waaaaaaallet!
I always wondered why you guys never made a video in this it has been out for awhile now I have one and absolutely love my gtx 1080 never sees temps above 56°c anymore. Although I'm not sure how you guys set this up because none of my heatsinks fell off. Also you should get a gpu fan header splitter to 4pin headers so you can control the fan curve from the gpu directly
The first random video that actually helped me
7:40 nice voice crack linus 😂😂😂
7:40 that voice crack 😂
Already 10 years ago, I took the GPU fans off with the plastic cover, and put normal bigger fans on that are run from the motherboard settings. Then you can adjust speed nicely yourself. So with a 3080TI or so, just take everything off and mount 2x12cm Noctua's. This thick GPU look Linus is showing, is so familiair.
what would happen if you also put the passiv fins with adhesive on the board? I mean sure it messes with the card but I guess there could be even more improvement.
Linus: sharpies a GPU
Me: dies inside
I thought the same thing lol.
*"The Chosen One?"* is the Intro Title to this video.
I'm the hand of god?
Z
You were so proud of that Segway, hahah loved it
0:06 "hurry mothers, hide your daughters!!" xd