To load pallets on our Double Deckers you have to raise and lower the rear suspension so the bay dock ramps can fit. When you are loading the top deck the suspension has to be lowered with the trailer air removed to allow this to happen, then to load the bottom deck you have to raise the suspension with all of the trailer air at its maximum again so the bay dock ramps can fit, so we have 2 safe loading/unloading heights of our Double Deck trailers.
Shows nothing lol, the hardest part of getting on a bay is lining the trailer up, your video starts when it's lined up 😂
It's easy after many years of practice, nice clean trailer, inside and out.
Good tip to remove the lead
Intersting
I want to work for Buffaload!
No actual manoeuvre to show how to get onto the bay
Why not measure the height of the bay deck and set you trailer to the same height ?
To load pallets on our Double Deckers you have to raise and lower the rear suspension so the bay dock ramps can fit. When you are loading the top deck the suspension has to be lowered with the trailer air removed to allow this to happen, then to load the bottom deck you have to raise the suspension with all of the trailer air at its maximum again so the bay dock ramps can fit, so we have 2 safe loading/unloading heights of our Double Deck trailers.