Infinity G35 Crank No Start

Sdílet
Vložit
  • čas přidán 12. 09. 2024
  • Hello everyone, thanks for watching. This vehicle was from an auction for a crank no start concern. The shop had replaced the fuel pump and a few other parts trying to get it started. I was able to tell an engine mechanical fault right away just by cranking the engine over. Always start with your basic checks first before diving in.
    I apologize about the audio quality in this video!
    Info about the Pico 4425a and WPS 500x:
    www.picoauto.com
    Jarhead Diagnostics WPS500x Case:
    www.jarheaddia...
    Info and where to buy the ATS eScan:
    www.jarheaddia...
    Jarhead Diagnostics Swag:
    www.jarheaddia...

Komentáře • 37

  • @d.d4184
    @d.d4184 Před 4 lety +11

    Unfortunately it was to hard to hear you with all the noise from the shop.

  • @tattedpicasso
    @tattedpicasso Před 3 lety +8

    im having a similar issue my g35 2004 wont start took it to a shop and he gave me a run around and changed several parts and never found out the issue

  • @weldingjunkie
    @weldingjunkie Před 4 lety +5

    Dang man what’s the speed limit there 100mph lol watch out now. Excellent video. Stay organized “I forgot my Escan” 😂😂. That truck set up is sick.

    • @JarheadDiagnostics
      @JarheadDiagnostics  Před 4 lety

      Haha yeah, I took everything out of my truck the day before and forgot to put that back in. 😰😂

  • @richkindred
    @richkindred Před 4 lety +1

    Just ordered a decked system for my truck. Hope I like it. Lol.
    On a side note, when you use a pico in your videos, can you mention what setting you are using for each channel. It helps people understand what settings yo use if they’re “green.”

    • @JarheadDiagnostics
      @JarheadDiagnostics  Před 4 lety

      You’ll love it! And yes sir, I sure can. But the reason I put the screen shots up at the end is for people to pause and look. When I was learning that’s how I did it. Pause videos and look at their settings. Lol

  • @edgar4554
    @edgar4554 Před 2 lety +2

    Wait what was wrong with the car ???

  • @cumminschaos4391
    @cumminschaos4391 Před rokem +1

    So was there any codes to begin with?

  • @Properly-Gapped
    @Properly-Gapped Před 4 lety +2

    Damn them drawers are dope

  • @billyyoder8171
    @billyyoder8171 Před 4 lety +1

    Thank you for the video. Good job. Have a blessed and safe week to you and your family.

  • @glennallen7129
    @glennallen7129 Před 3 lety +1

    Should’ve show a known good cam crank vs the suspect but thanks for the video!

  • @AKusdm
    @AKusdm Před rokem +2

    Swapped a new engine into my g35 won’t start has no fuel or spark my dad thinks it’s a problem with the ecu but we swapped that with a new one and it still has same problem he thinks it has something too do with an anti theft system on the ecu itself because the vehicle hasn’t had an engine in it for a long time but I feel as if that is unlikely too happen but if there are any tips or ideas anyone has please let me know

    • @JarheadDiagnostics
      @JarheadDiagnostics  Před rokem +1

      The ton wheel for the crank position sensor is the flywheel. Did you install it correctly?

    • @AKusdm
      @AKusdm Před rokem

      @@JarheadDiagnostics im not home at the moment I will check tomorrow and I will let you know thank you for the suggestion I really appreciate it

  • @FourRingsAuto
    @FourRingsAuto Před 4 lety +1

    What tablet are you using the pico on there?

  • @alexandriabowe
    @alexandriabowe Před 4 lety +1

    Good stuff Brandon

  • @diegogomez5225
    @diegogomez5225 Před 4 lety +1

    My g35 is doing the same i was hoping it wasnt the chain another nissan falls victim to timing chain 😪

  • @ahmadhassounmusic6053
    @ahmadhassounmusic6053 Před 4 lety +1

    Good job bro

  • @estellaronquillo243
    @estellaronquillo243 Před 3 lety +1

    My car doesn’t let me crank the key but started with a tablet that my friend had

  • @martinmcfly8135
    @martinmcfly8135 Před 2 lety +1

    I’ wanna get in touch with you!
    I need your help

  • @Jo-hannson
    @Jo-hannson Před 3 lety

    good diagnose! thank you sir

  • @edmonmayfield2446
    @edmonmayfield2446 Před 9 měsíci

    i have a g37 and wont start ,my rpm needle does not move when it spins over ,what could that be ,replaced fuel pump still no start ,what causes car not to have a start signal

  • @sonofmontezuma3732
    @sonofmontezuma3732 Před 4 lety +1

    man that guy was getting after it with that impact.lol
    nice tool box ,myself i like the rat packs.
    great video

  • @TTV_TOXIC_MAD_YT
    @TTV_TOXIC_MAD_YT Před 2 lety

    I like you set up on your truck what's good scanner you us

  • @christopherryan1036
    @christopherryan1036 Před 4 lety +1

    Another great video! Thank you Sir.

  • @stephanevaucelles6378
    @stephanevaucelles6378 Před 2 lety

    thank for video

  • @joeking4160
    @joeking4160 Před 2 lety

    Lexington sweet place

  • @jayjb833
    @jayjb833 Před 3 lety +1

    Before I watch I think it’s camshaft sensor

    • @thegamepz
      @thegamepz Před 2 lety +2

      Faulty camshaft sensor will cause long crank but it will start. Low on power but it will be working. Faulty crankshaft sensor will make it not to start. There is another propper technique to diagnose timing issues - Cam / Crank correlation.

  • @MikeJones-eh6el
    @MikeJones-eh6el Před 10 měsíci

    Crazy that an 'automotive repair shop' had to call a mobile mechanic to diagnose a timing issue, I'll make sure not to go to that shop, maybe it's just a tire shop.

  • @jao906
    @jao906 Před rokem

    I have a 370 crank no start found my intake manifold gasket was leaking all around and map sensor was dirty. Scanner reading lean on alot of components. And gas gauge reading incorrectly it’s saying I need gas but flashing 70miles till empty I’m so confused