Service tutorial Ender - 3 S1 Pro cleaning the hotend throat
Vložit
- čas přidán 4. 04. 2022
- Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email:info@creality.com
Official website: www.creality.com
Any technical support in need, Please contact our official service email,remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email:cs@creality.com
Any inquiry of firmware and software,Please download it by creality official website:www.creality.com/download
Creality firmware obtaining tutorial: • Video - Věda a technologie
I have never in my life been able to use an wrench like that with one hand. Im blown away
Haha me too Engineering hands probaly😂
Thank you! Helped me a lot!
Gracias
can the ender 3 nozzles be used on the ender s1 pro?
How to clean your hotend in a worst way with a damaged heat block and bent screws, scratched throat and so.
Hello, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
There's a lot of reports of jams happening on the S1 pro perhaps due to the PTFE tube. Has this problem been fixed in the recent batches?
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
If say not cause I’ve only just got mine recently and it’s clogged too
New here to 3d printing and just got this printer. But isn't the s1 pro all metal hotend? I thought it didn't have a ptfe tube in throat.
My issue is that after a few hours down the line, mid print, the extruder stops extruding. No clogging. Just direct drive gear marks on the filament and the black outer gear wheel making tak tak noise and vibrating. Using pla, at 200deg, 0.3 layer, 0.8 retraction. SHOULD i release the gear spring tension screw of the filament feeder knob? Please help. Ender 3s1pro
Have you figured out your issue? Got the same one
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
@@SovietAra Also me the same, brand new, and I had other printers so far, never seen something like this. Did you solve the problem?
I tried all the methods but Nothing is working. Extruder is completely jam. There is something wrong with this type of extruder.
Please make a video on how to replace thermistor in ender 3 s1 pro what is the proper name of this type of thermistor and where from we can buy it? I purchased my ender 3 s1 pro from amazon.
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
@@crealityafter-sale5706 the gears on my pro are making a sound like they need to be cleaned or lubricated. Do you have a video on that? It’s nearly brand new!
Hello,
My Ender 3 S1 has some stringing and scraps a bit the infill
Hello, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Use 5° less Print Temperature for the filament. If its not better and still scraping try 95% flow rate. Be sure to not have too much overlap % in wall and or infill
Why did my S1 come with the V2 interface and not that touch screen interface? >:(
Touch screen has the Ender 3 S1 Pro
@@muzafferkarabulut9013 they released a fucking pro alrdy?... damn
@@mrphysics2625 Yes
@@mrphysics2625 I was out around the S1, just a tier up that has the touch screen, LED light bar and an all metal hotend for higher temps.
@@MrNickpeck36 See this comparison of the two... czcams.com/video/x7nIJoKfc78/video.html the young lady and her brother do an excellent job of this especially the difference in the specs.....