How to Update an Old Gas Fireplace
Vložit
- čas přidán 24. 07. 2024
- Gas Fireplace Restoration and Update. Learn how to update your old gas fireplace to improve its appearance and significantly improve the ambiance of your space, all while retaining your existing gas logs!
Keep up with the latest projects here at Project Billd by:
- Following me on Instagram: / projectbilld
- Checking out my website: projectbilld.com/
- Subscribing to my channel: / @projectbilld
Disclaimer: The following contains affiliate links. If you purchase a product through one of the links, I may receive a small commission (at no cost to you) that I can use to feed the platypus. And it’s always hungry.
Materials I Used:
High Temp Paint: amzn.to/3UgORLj
High Temp Sealant: amzn.to/3EbNSX7
Yellow PTFE Tape: amzn.to/3DKj1iV
Flexible Gas Line: amzn.to/3UtYLcg
Silica Sand (for Natural Gas Logs): amzn.to/3tcaD6M
Vermiculite (for Propane Logs): amzn.to/3Tiz3WO
Rock Wool: amzn.to/3WB16nv
Platinum Embers: amzn.to/3zUMYfb
Lava Rocks: amzn.to/3TeXvbJ
Aftermarket Glass Fireplace Doors (varies by fireplace model): amzn.to/3UDWQ4y
Tools I Used:
(in order of appearance in the video)
Adjustable Wrench: amzn.to/3zPGyxN
Ratcheting Screwdriver: amzn.to/3E5tT95
Respirator: amzn.to/3WM93WK
- As an Amazon Associate I earn from qualifying purchases
Music: www.epidemicsound.com/referra...
Chapters:
0:00 Intro
0:07 Remove the Old Gas Fireplace
0:54 Paint Firebox and Fireplace
2:28 Reinstall Gas Fireplace
3:16 Add New Materials to Fireplace
4:28 Man Make Fire - Goodbye! - Jak na to + styl
Hey all. A few people have pointed out that I should not have used tape on the flared connections of my existing gas line and gas log set. That is correct and was a mistake on my part. The tape is not needed for flared fittings and can only cause issues, so be sure to learn from my mistake. - Bill
This is great information, however, what are we supposed to use then if no the tape. I did the same project, painted my old bricks (looked just like yours) and updated the grate with paint, new rocks etc... When I removed the gas line it had like a white grease on it. Do I need to replace that or can I leave the old lubricant on and reinstall the line? Thanks in advance.
If you have flared fittings you don't need anything on the threads. I'd try to clean off the old stuff, and test for leaks after.
I like the lack of fluff in your videos. Everything is is informative and useful, I think if you keep hitting bigger projects and keep the same style you might build a spot for yourself
Thanks! That's the goal, don't want to waste anyone's time
Great tutorial! I'm updating our gas logs this weekend. Thanks!
Dude, this video was awesome - exactly what I wanted to see before I tackle a similar project. Seeing you complete your upgrade tells me that my fireplace may be able to experience the same. And thanks for all the product links.
Awesome, glad it was helpful!
Thank you for this tutorial. It's just what I needed.
You're welcome!
@@ProjectBilld Forgot to mention I subscribed after watching just this one video. Instructional but quick and to the point. Well done.
Thats gorgeous, you changed my mind, ty
You're welcome!
Exactly the video I needed! Thanks for the content bud!
You're welcome!
Nice job!
Thanks!
Thanks man!
This is something I’d have to hire someone for. I am definitely not this DIY savvy. This looks great. Wish I knew someone that could do this for me. I have never used my gas fireplace because it wasn’t hooked up correctly.
Good info thx
You're welcome!
Thanks to your soapy water tip, I was able to verify there was an actual gas leak on my fireplace gas connection! 🙏 🙏🙏
I was not looking for that. I was interested in how you would set up the logs. Then my wife mentioned she smelled gas and I tested it.
How about using that specific footage to make a CZcams Short? 😎 It may lives! 😊
Glad you were able to detect a gas leak! Never thought about making shorts from my videos, I'll have to look into that
@@ProjectBilld shorts are basically Instagram Reels for CZcams (or similar to TikToks!) think it would be a great way for people to find your content on CZcams. 😎
Not supposed to use gas tape on a flared join in Aus.
Nice video
Thanks!
Great video, thanks for sharing. Have you ever converted a double sided (see thru) fireplace into a single sided fireplace? I have a see thru fireplace between my master bedroom & master bathroom. I'm trying to cap off, then drywall the side in the bathroom, in order to build a shower on that side. So far, fireplace stores are telling me I have to replace the entire fireplace, which is very expensive.
I haven't done that but unfortunately I can't see it being safe to do without replacing the insert so the fire is contained. Might be worth searching in your area used market for a used fireplace insert that someone is replacing and refurbing it/buying new gas logs for it.
Looks great! Did you ever have any issues with fireplace micro switches?
Thanks! Like a millivolt switch? Neither of mine use that type of valve, so not particularly
I dig the look of this fireplace. I’m curious about the plastic valve handles and I believe starter button and heat. I would think that the heat would melt said hardware after time. Have you had any issues with this or are they high temp or heat resistant?
✌🏽
Haven't had any issues. That fireplace is over 20 years old so if it were going to melt I suppose it would have already
@@ProjectBilld ah yes I totally agree! ✌🏽
Great video! So helpful. Did you use Satin Black or Flat Black paint?
Flat black. The specific paint is linked in the video description
How well does your fireplace heat the home?
Thinking of fixing mine. Just moved into mine, and it has an older one. Love a fireplace and it could help in an emergency potentially.
Not particularly well really. It's mostly for ambiance and emergencies like you mentioned. It heats the room it's in alright, but not much beyond that room
Where can i contact you to do my fireplace in Surrey bc
Could I also refresh the paint on the fireplace surround? Should I just use the same paint?
Yes you'd want to scuff it up/sand it first to promote adhesion and then roll or spray on the paint, not brush. I'd probably use a different paint, I don't think the paint used in the fireplace would go on smooth. Plus it's overkill as the surround doesn't get as hot. I'd look for a heat resistant latex paint. This also allows you to choose a different color than black if desired.
Is this a Superior VF6 fireplace? That's what I have and I can't find the glass doors that fit it anywhere.
It's not. If you contact me through Instagram or my website contact info I can try to help you find doors that fit
Can you tell me where did you buy the pieces that goes inside of the firebox that you painted?
Which pieces?
I have a barely used propane gas fire place. The flame, quite frankly, is pathetic. I pulled the logs, etc, out, blew out the line from pilot to gas line. Nada. I just ordered the rocks and wool and am hoping it could generate more flame. There is no second gas line above which really looks great. I'm somewhat embarrassed as I keep trying to fit the logs in the metal templates and the holes which I'm thinking the gas/fire shows. Got pictures, etc. but obviously can't upload them. Just subscribed and will watch your videos. the answers might be in them. Regardless, thanks! Very informative. Oh, when I said barely used, it was barely used (maybe a dozen times).
It's possible that you'll need to get a new log set. Can't do much about it only having one burner unfortunately. We have a second fireplace in our house with a bad set I'm going to have to replace
Wow. Thanks for the fast reply!@@ProjectBilld
How do i upgrade my gas logs? The ceramic logs are just laying on the metal rack and the flames dont really spread out. There is no burner pan, its just the grates. Do i upgrade the logs and burners together ?
Yeah pretty much. Typically you'd buy an entire new gas log set that includes burners and logs. I'll be doing that for the other fireplace in my house as the valve is broken and it has a larger opening that could benefit from a longer log set.
Hey your fireplace looks Gr8 can you share the burner model no if possible
Thanks! I think the burner model is temco AD29N and the fireplace unit is heatilator e36
Thank you for quick response really appreciate your help 🙏🏻🙏🏻
Where did you get your new fireplace doors. Can you share the link?
They are linked in the video description
Dude you should never gas tape a flare fitting. If you tape the threads for a flex line you can cause a leak at the flare because the tape doesn't allow the flared ends to seat as tight as they need to. Otherwise good job. But the tape is very dangerous in this application
I agree that's it's not needed for flared fittings and that's a slight oversight on my part. But I don't agree that it's dangerous. As long as you check for leaks there shouldn't be any issues
@@ProjectBilldit is dangerous in the long run.
@@ProjectBilld wrong, teflon is a mild lubricant and is direct counter to the friction seal of a flared fitting, very dangerous
Thanks for the feedback all. I pinned a comment letting others know that this was a mistake on my part and to not do the same
do you have a link to the glass doors?
Yes, look in the video description for aftermarket glass fireplace doors. It will be in the materials I used section
This fireplace looks like it has never been used!
I recently bought a house, it already has that chimney system, but I don't know how to connect the gas bottle, the connection is outside the chimney outside the house, can you help me?
It's hard to say without seeing it firsthand. Are you saying there's a propane tank outside? And is there an existing line running to the fireplace?
What exact paint did you use, and was it flat, matte or satin?
Flat black. It's linked in the video description
Thank you so much. Great presentation.
I removed the ceramic logs and hose them down with plain water and left them outside to dry, they were still wet the next day? How long before they're completely dry?
Were they lightweight fiber logs?
@@ProjectBilld no heavy
Ok good, sounds like they are the kind that can get wet. I don't know how long they'll take to dry, that depends on the temperature/wind/humidity outside. I'd try to bring them inside to dry if you can
Can I burn them while damp?
I don't know but I wouldn't. Best case it would release steam and vapor from any cleaning product if you used any which isn't great. I'd worry that they might crack due to the expanding moisture
You do not put "tape" on a flared fitting!