1.28" Round LCD, Touch Display, Type-C, ESP32-S3 Development Board, Accelerometer&Gyroscope Sensor
Vložit
- čas přidán 6. 12. 2023
- ESP32-S3-Touch-LCD-1.28 (240×240 pixel) is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch capacitive touch display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.
- Věda a technologie
Really smooth looking piece of kit. Can you run external sensors off it and trigger motors? I might have to get one to play with
This depends on the interface of the sensor or motor. It can run motors or sensors with UART, SPI, and I2C interfaces.
I got this and I tried to install the demos and examples but unfortunately all fail to compile. do you have working examples for use under Arduino IDE?
Hi dear, you can ask for support on this service.waveshare.com/
The demo code has an error when it tries to read and display the battery voltage. You have to comment out the 'result = DEC_ADC_Read();' code. It will crap out every time on a memory overload if you dont.
I understand that this module is compatible with MicroPython, but can I flash a micropython program to it and use it independently as a smartwatch?
Hi dear, you can contact our support team about this service.waveshare.com/
Can it be used as an extended display? To work directly via windows?
it can't
I cant get this to work with LVGL and TFT_espi at all. Been spending days of hours trying to make it work. Just cant seem to no matter what version or tweaks I make. Why does their demo just use a home baked display code?
hi dear, pls feel free to contact our support team service.waveshare.com/
sorry what did u do in the end bcs i have the same problem
@@Vincent24467 Never got it worked out. It always fails to initiate the display properly.
does it have a mic and can we connect a battery to it?
Hello Dear, you can contact our support team service.waveshare.com/
Do you provide the connector as well?
There are the lcd and the SH1.0 12PIN cable included
Is this amoled?
i will literally pay someone to help me get an animated gif onto one of these, i bought 3 and cant get any of them to play nice (not this exact model but very similar)
hi dear, pls feel free to contact our support team here about the usage problem service.waveshare.com/
Hi!🔥 I have successfully created several interfaces with this device and I can definitely help you run an animated GIF on it. I have worked on similar models and overcome the same challenges you face. If you want I can send you screenshots where you can see the projects I have developed, just help me with your email.
Is it possible to download demo from this video?
hi, you can refer to our wiki: www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28
We purchased this board, do you have any documentation for it? If yes where can we find it?
Hi dear, you can refer to this www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28
@@waveshareelectronics we are having troubles with the setup of the CST816S, could not find the sda, scl, rst, irq. Any advice?
Does this device have an IMU?
yes QMI8658
Where's the touch code?
Dear, you can refer to our usage resource: www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28 or ask for product usage support here: service.waveshare.com/
Zero input/output pins :/
It has an SH 1.0 12 pin connector for that. But the question is do they provide the cable
Dear, you can refer to the package content part on this website: www.waveshare.com/esp32-s3-touch-lcd-1.28.htm
@@waveshareelectronics thanks, and any mounting points? I want to use this board in my project but I don't know how to mount it in position.
How much price in inr plz
pls feel free to contact our sales Dear
More details: www.waveshare.com/esp32-s3-touch-lcd-1.28.htm
Usage resource: www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28
Support: service.waveshare.com/
yes, this animation is very smooth. Great product, 3 years too late lol