HP Omen 30L AIO Cooler Upgrade + Benchmarks: DROP TEMPS BY 20 DEGREES!!!!
Vložit
- čas přidán 19. 06. 2024
- Do you have a HP Omen 30L? Is the cooling not up to snuff? Do you want more performance?? This video is for you then!
In this video I show you how to upgrade the cooling in your HP Omen 30L to a 120mm AIO. It will drop temps by degrees celsius, increase your clock speed, and result in Higher FPS.. DO IT!!!
Check out Havocshield @ havocshield.com/
Subscribe!
Follow me on Twitter: zapartha.com/twitter
Business Email Inquiries: jeffery.reedit@gmail.com
Parts Needed and Recommendations (PAID LINKS):
Noctua NT-H2 Thermal Paste amzn.to/2JMV2r0
Noctua Cleaning Wipes: amzn.to/3lL2EYn
Ifixit tool kit: amzn.to/2Lctw71
Cooler Master AIO: amzn.to/3mMF3rE
Kraken AIO: amzn.to/2VKxTrK
Corsair H60: amzn.to/3lKAxsc
The above links may provide me with a small comission
#HPOmen #AMD #Upgrade - Věda a technologie
Awesome video man. I'm in the process of upgrading all my fans and adding 2 more. I'm hesitant to do the cpu cooler for the mere fact I'm a noob. But this video definitely helps in getting through the process much easier. Thank you!
You're welcome! I am glad that it helped.
It's the only way to learn I went off of his psu upgrade video to change mine. If you have the 30l with a 2060 gpu and a Ryzen 7 3700x processor.. then you are going to want to change the cooler and the gpu.
I dont like to down anyones video, but u dont have to do anything similar to swap out your cooler. take the other side panel off and the cpu backplate is easily accessible from there. also, i wouldnt trust factory installed thermo paste. get your own and apply the X pattern.
Not with this case. The bracket is hidden behind another metal "plate"
This is giving me ideas, thank you!
You’re welcome!!
Just installed a NZXT Kraken M22 on my Omen 30L and this video helped me a LOT! Thanks Jeff! You da man! ❤
Did you have to pull the MOBO to do this?
@@xSambora Yes I did. It wasn't that bad though.
does the rgb work?
Did u r rib work?
I have a 30L prebuild that came with an RTX2060; I'm not super-smart with building a PC, so I went with a prebuild.
I looked up what were acceptable temperatures and my system runs ok; I did use Ryzen Master to undervolt the 3700x it comes with and that really helps the CPU. I also replaced the RTX2060 with a Zotac RTX3070, and that GPU runs within comfortable temperatures. While I don't need to do anymore to the system, I would definitely like to add better cooling and a better power supply (the current 500w PSU doesn't have issues, but once I start upgrading, I will definitely need to start feeding the machine more power). Thank you for this video Jeff! SUBBED!
Thanks for subbing and good luck with the upgrades!
Your a life saver just purchased your fan kit and Aio cooler through your links my omen 30L might as well be a space heater 😂
Haha yeah it’s a hot boy for sure! Good luck with the upgrades!
Thanks, I needed to get the back thing off the motherboard and your tutorial helped
Glad I could help
Did this and completed it thank you!!
You’re welcome
Thanks for the video, especially the temp comparison at the end. Super helpful!
Question: Will you be able to customize the color of this cooler using the OMEN Light Studio? Like other lights and rams?
very in depth review, and was very helpful i liked and subbed 👍
nice review ... keep up the good work
Thank you. I will!
Thanks for the video. The AIO is coming in today. Not crazy about taking the bracket off the motherboard but I will just take my time with it. Not crazy high temps when gaming but around 75c the entire time while playing rust and pubg. Would like those to come down. Glad to know I don’t have to use the rgb. I’m not crazy about a lot of rgb and with 4 ram sticks I feel mine has enough now.
Awesome
What is the temp now after upgrading the aio?
Ima subscribe btw you have really helped me out a lot
Glad to hear it!
Great video. Just curious what your idle temps were and what they are now? Thank you.
60s with the stock and down in the 35-45 range with the new AIO
Just installed mine thanks again, my max clock has improved from 4.2 to 4.3 as well as 20 degree temp drop.
Rock on!
@@JeffTheITGuy i get my 30 L today will i need to do this?
@@xXReaperXx714 if you want more performance and lower temps
@@JeffTheITGuy does the temperature stay under 70?
@@xXReaperXx714 with the stock cooler? No, not at all
Glad I came across your channel! Gonna be installing this same liquid cooler in on Thursday! Also see your upgrading the power supply which is something I want to do in the future so glad you’re posting that. Will you be posting more upgrade videos in the future for the OMEN?
Thanks. Hope you enjoy it and subscribe. Yes I am doing videos on upgrading every component In the omen.
@@JeffTheITGuy Saw a crazy decrease in temp from around 84c to 56c and saw performance increase when playing Black Ops Cold War! Definitely worth the investment.
@@bulldoggamerchannel Sure is! Glad it helped your out!
Very helpful thanks
You’re welcome
alright finally gave in and grabbin one. Ive been running a box full of fans so far and its starting to not manage quiet as well anymore, if it was ever managing it at all! lol
Haha yeah
@@JeffTheITGuy more nervous about actually working on this stuff. But i reckon ill learn.
@@kanenine5838 just take your time, be careful, and follow my steps and you should
Be golden
@@JeffTheITGuy knew it was an upgrade of a rig when i got it, so knew it was matter of time till i decided to learn to upgrade.
PC parts were hard to find a year and a half ago, so i got the pre-built to start.
Appreciate youre quick active responses! Especially on an older video!
Have a good day! If i remember ill letchya know how it went!
I took the radiator bracket off and I don’t know what I do with it am I screwed or am I still able to put a radiator?
if I just wanted to do a motherboard swap and my system already comes with the stock liquid cooler I could reuse the same backplate?
Can I still install my radiator the mount the omen 30 came with I have no idea what I did with it, so am I screwed?
im curious why you had to change the bracket on the back of the motherboard. if i bought a am4 compatible AIO and my socket is in fact an Am4 would i have to do this?
Hi Jeff, I find your instructional videos very helpful! However, I've come to notice that a few other people have mentioned that they were able to install the AIO without removing the motherboard. As a first time PC owner I'm a little nervous to even touch it and cause damage considering it voids the warranty. Is there any way you'd be able to look into how they were able to pull it off? A lot of the IT people I come across on here say that it isn't possible without removal and I'm sitting here wondering how these people were able to make it happen. Their videos lack depth and are more of an after installation video opposed to your step-by-step videos. Thanks in advance!
I tried to make it happen, I truly did. The thing with the bracket is that it doesn’t allow for the cold plate to touch the CPU.
Hey Jeff, your videos have been an absolute savior. I’ve just ordered all my upgrades so it’s no longer a space heater under load. This will be my first time pulling the motherboard and I’m just curious about how to disconnect the 2 wires connecting to the WiFi component. Any help would be great, thanks!
There is a clip, unscrew the clip and remove it then lift up on the antennas
Incel!
@@youngzar1296 must be a console player
If i were to order a cooler that used the intel bracket, would I be able to get around having to remove the motherboard from the case? BTW thanks for your videos you are my go-to reference for uppgrading my omen
Unfortunately not. The standoffs on the stock bracket are too tall and the cooler won’t make contact with the CPU.
I just ordered a 30L today. It's a shame you can't just pull off a back panel, and get access to the cooler retention bracket.
I'm sure glad I'll have your video one day.
I’m glad you’ll have it as well
You can take off the back panel. At the bottom of the pc in the back right there should be a screw and once you get that off you push the backplate down
Or just watch Dankamyouknows vid ab it
@@ronsnipess5587 I will eventually try this. Thanks.
So I just recently bought a 120m NZXT air cooler but I'm having trouble it seems it didn't come with then AM4 amd back bracket would I need to buy the stock AMD SOCKET AM4 BACKPLATE & is it compatible with the motherboard?
It's like I want to attempt to do this, but removing that plate behind the motherboard looks scary to do haha.
Just did it yesterday just be careful and go slow
@@dokzu2741 thank u. Have u added an aio to your omen?
@@ElReySupr3me yes I added the same aio in the video it does a great job cooling
Yeah its kinda spooky but just be careful i just used a flathead and a guitar pick and i got the corsair and got like a 20c drop in temps for games its worth forsure
It's super easy. For me in general for upgrades, it's just a PITA.
hey jeff, i was wondering if i would have to take the motherboard off and go through the same process you did if i bought the air cooling noctua nh-u9s. or would that even fit in the omen 30l? i have the amd ryzen 7 3700x with the geforce rtx 2060. thanks in advance!
Yeah you probably would. The standoffs are super tall for the proprietary heat sink
Hey Jeff! Would a Corsair hydro series 120mm Radiator CPU liquid cooling system work with the HP omen instead of the Cool master brand CPU?
Sure would
Doing this in 2 days. Afraid but I’m ready
Get it! Just take your time and be careful
Just ordered this cooler, gonna install on my 30L this weekend, doesn't look to bad of a project! Good vid! You have any vids of it running with the cooler? Just curious on noise
Hey I talk about noise and temps in this video and in a video I did about changing all the fans in the case
@@JeffTheITGuy got it installed tonight my guy, everything works great! i couldnt get the wifi plug back on at all, tried for like 20mins but i just said screw it since im ethernet run anyway lol your vid helped me out!
@@swaggasaurusrex949 glad you got it take care of!!!!!!! Now enjoy the cooler temps and quieter operation. Play some games!
@@JeffTheITGuy thanks! Do you have any suggestions to get the RGB workable on the AIO?
@@swaggasaurusrex949 do you have the stock motherboard
I installed the m22 kraken my issue is the RGB doesn't work bc of the motherboard does not have a USB 2.0. Anyone having this problem
Is the stock aio that comes with it any good? I bought the same version you installed not knowing that none came with water cooling installed. Debating whether to swap them out or return mine.
I haven’t tested the stock AIO. It should be on par with the one that I recommended
I wonder if removing the sag bracket on the GPU helps with airflow at all. I imagine the CPU cooler does much of the heavy lifting cycling hot air away from these blower style cards, so I could see removing that little obstruction aiding breathability by a bit.
I removed it and it didn’t help
It's best to get a whole new case. I just swapped out my Omen internals with the Corsair 400D case. It took maybe an hour or so getting things to where I wanted them to be. Bad thing about these motherboards is that they only have 3 fan headers. 1)for the intake 1) for the exhaust and 1) for the CPU coolers. I luckily had a Thermaltake 3 pack with RGB that had a fan hub that connected 3 fans to one motherboard pin. If you want to add RGB or really anything that requies another internal USB connection, you're out of luck. This motherboard is just about as barebones as it gets.
@@lazava5150 yeah the stock motherboard sucks
Actually you can remove the back plate to sabe removing the motherboard, it has just one screw you remove from the inside at the right of the power supply, so it should be easier right?
There isn’t a cutout on the backside of the PC. The screw beside the power supply just lets you take off the other side panel. If there was a cutout on the other side behind the motherboard then you could change it without removing the motherboard.
Do you have to take the motherboard out to replace the retention system? Wouldn't it be the same dimensions?
You do have to take it out. The stock retention system standoffs are too tall and the block won’t touch the CPU
i have a 30 L with a 3080 and 10850k im definitely gonna need to consider this
@nicholas kowalski Where does that fit inside the case exactly?
What are your idle/gaming temps with that combo?
@nicholas kowalski can you link that for me?
I have the exact same build. I’ve had it since November and I overheated for the first time last night. I bought a prebuild due to lack of knowledge so not sure what the best route is
@@TW_GTA the issue is with the processor man, a i9-10850k runs way too hot for a 120mm AIO. some people upgraded the stock AIO with a nocta cpu fan, so you can go that route.
Do you think its worth all that work? Im not too comfortable taking out my motherboard so maybe theres another aio that fits onto the plates without disassembly you recommend???
Only AIO that works is the one from HP. You could contact them to see if it is possible to purchase one
Hi Jeff, will this work on the intel version with the already installed water cooling?
Possibly. Why would you want to change it if it already has water cooling?
So in these HP Omens, even though its a Ryzen (AM4), you do not use an AM4 back plate or assembly for AIO coolers, you need to use Intel?
yup, just ran into the same problem with a buddy, it's one of the dumbest designs I've ever seen. Thanks HP.
when you took original cooler off it looks like there were already stand offs , did you measure if they were a similar height to ones in the kit ? I just wonder if you could have used original plate and the grub screws maybe with a washer
I mean you could have used washers on the back of the board to make the standoffs shorter,. But at that point you would have to remove the Motherboard and backplate adhesive so why not replace the backplate instead.
@@JeffTheITGuy thanks I didn't realise they were too long. I'm thinking of installing cooler over next few days. Great video 👍
@@cmbrightuk thanks
Do you know if this 30l’s motherboard has enough fan plugins for a 240 mm AIO? Note: I’m getting a new case so fitment isn’t an issue.
You will need a fan splitter for sure or a fan hub. I believe it only has 3 headers..
Noob question? Do they make liquid coolers for the stock back plate for direct replacement?
I don’t think you can buy them new. Might be able to find one on eBay or contact HP.
I have a really good question do you have to take out the motherboard i don't want to break or mess it up?
You absolutely have to take it out to upgrade the cooler unless you can get a hold of one of the HP Omen Branded AIO coolers
Sorry if I misunderstood but if you have the intel version do you still have to remove the MB and change the bracket?
Im not sure, I haven’t worked with the intel version. You could always try a test fit and see if it makes contact
so is it crazy to like the case but not like the motherboard, could you change it out (i want 4 slots and abit more ports for fans and such)\
Yeah sure can. I have a video on my channel about changing it
Can You add a 3 way RGB splitter and connect it with the Light bar?? Really helpful btw. Subbed and liked!!
The lightbar isn’t RGB and it connects to the daughterboard at the bottom of the case by the power supply
If you remove the back panel to access all the wires in the back there’s an extra rgb wire where you can connect rgb to the fan .
@@genarovasquez1076 fr ?
@@genarovasquez1076 any chance you could link a picture?
I installed a arctic intake fan in the front of the pc w a pwn 4 pin only no rgb i noticed it isnt spinning as fast as the rest of my fans and whenever i boot up the omen command center my fans are always at turbo. Any suggestions on how to fix this?
Not all fans have the same fan speed. The small 90mm is going to have a much higher RPM than your front fan. Some fans will spin at 2500 rpm and some spin at 1700rpm.
Is there a certain style of bracket that would work so I wouldn’t need to take the motherboard off?
Not that I know of
Is this worth voiding warranty for? I have one coming and I’m worried about temps, but I also don’t want to become defective because I plan on installing the AIO right away, should I wait or install it right away
I’d wait. Make sure it isn’t defective first
Can you fit a three fan?
What temp readings are you getting for the GPU? I wonder if it makes sense to add liquid cooling for the GPU....
Hi, I upgraded the fans in the whole system. I have a video on my channel that shows a change of 6c on the GPU and like 10c on the GPU.
Awesome video bought my sons a 30L loved it but one they deemed the cpu to be defective due to the heat only ran for two days.. we did in fact noticed the temps ran very warm didn’t like that we are going to give a cyber power supreme gaming PC a try that actually comes with a liquid cooler already if it doesn’t work out going to Swap back for the 30L and make the upgrade.... came across another upgrade suggestion about installing the cpu fan with a noctua with top case fan as well as two lower fans.... to get the same drop in temp or even more.... I know everyone has a different stance on liquid compared to air so what would you really suggest is the best cooling upgrade liquid or air?
Given the size or the case liquid
@@JeffTheITGuy okay if we swap back for the 30L I will definitely be installing this AIO cooler? Any other upgrades you would recommend along with or just the cooler should be enough...main game they play is call of duty..
@@serafinlopez7237 if it doesn’t have 16gb of ram then definitely upgrade the ram
@@JeffTheITGuy yes the 30L we had was 16gb ram.... what’s your thought on the CyberPowerPC - Gamer Supreme Gaming Desktop - AMD Ryzen 7 3700X - 16GB Memory - AMD Radeon RX 5700 XT - 1TB SSD
honest opinion...or go back to the omen and install the suggested cooler...?
@@serafinlopez7237 the CyberPower is good the omen is a bit better
HI! Does that top mount bracket for the radiator come with the aio or do you buy it seperately? Also, for the gpu can you control it in the omen software?
The top mount bracket comes with the Omen 15 PC. What do you mean by control the GPU?
@@JeffTheITGuy oh my bad i mean can u control the cooler in the hp software for the lighting. Did the rgb work/did you find an extension for urs
@@JeffTheITGuy just subbed
@@nj_grails3182 UI can’t control it and I didn’t worry about the RGB haha you just need an extension and it should work.
are there any cheaper options ofr the ifix it tool, i would liek to purchase one but i would like to know if there are any cheaper options for me
Yeah they make several different kits at different price points.
@@JeffTheITGuy thanks, also another questions you said we had to take out the motherboard to place the AIO, im kind of a noob any suggestions on how to do this without messing everything up
Do i need to change the water cooling system for the one with i710700k and 3800 or is it enough to change the cpu fan to Noctua NF-A12 to make it cool a bit better?
I’d change the thermal paste and fans in the case. The water cooler is the equivalent of what I put in. Changing the thermal paste and fans can lead to almost a 10c temp difference
@@JeffTheITGuy Allright thx :)
I can’t find the header for the RGB on the motherboard, where is it located?
It doesn't exist on the motherboard, I mentioned that in the vid I do believe
Hey Jeff! Is there any way to make it light up besides getting a SATA to Molex adapter? Like out the box? I have the HP Omen 25L.
I don’t think so no.
@@JeffTheITGuy what kind of SATS to Molex adapter is it i have no knowedge on cables. thanks!
@@pswag4 just a regular SATA to Molex
Does the 240l version work if I were to get a different case or fit?
You would need a different case.
Heyas,
Will this work the same for an i9 Omen 30? (i9-10850K) I am close to buying one but don't want to fry it. Thanks! Awesome vid.
I think the i9 variants already have water cooling
they come with water cooler... upgrade the bios out of the box or your temps will be 100c solid
Will this void your warranty? If so, let your system melt while waiting a year for expiration? Or just say screw it and replace the aio?
Yeah it’ll void it. It’s a gamble if you aren’t familiar with upgrading PCs
This is my first pc and the first mod I’ve done to it. Is there any cpu cooling solutions for the omen 30l that don’t require taking out the motherboard? I just can’t find a definite answer anywhere and the stock cooler absolutely sucks.
I’m not sure. Probably the HP Omen AIO that cooler master makes
Do you know where you can buy that Aio ? I have looked everywhere!
@@zachburgeds1331 bro I’m not too sure if u can buy it separately, did a ton of looking to no avail. Ended up just taking out the motherboard and installing the one in the vid and it really wasn’t that much of a thing as long as u follow along good.
@@dashii111 I don’t think you can buy it separately. I looked for it for a long time before getting the one I used in the video
I bought one of these recently. Luckily, mine came with a liquid cooling fan for the CPU in the spot you installed yours. However, my GPU still gets up to 76 Celsius. Should I look into adding more cooling?
Upgrading the fans can make a huge difference. About 6-10c
@@JeffTheITGuy Can I upgrade the fan on the stock liquid cooler?
@@rice6022 yeah that is easy.
@jefftheitguy Jeff quick question after I set up my cooler I’m running into a Ram issue my left slot doesn’t recognize the Ram anymore both my 8go Ram sticks are working fine but can’t seem to get my PC working with both Ram in. Keeps getting me those 3 beeps noise . But when I pull out the left Ram from the slot the PC boot up perfectly fine . Any idea buddy?
Push the ram in more firmly, check all your connections to make sure that everything is plugged in correctly. Also, when you took the backplate off, I hope you were super careful!
Also make sure that you didn’t over tighten the motherboard to the case. Check those screws as well.
I was super gentle and careful thank you Jeff I’m going to look for those as well. Will update you thank you
Just order the kraken aio, does the come with a bracket for the omen 30l?
You have to use an intel bracket. The AIO will come with an AMD and Intel bracket. You have to remove the stock omen bracket which can be tricky and then use the intel bracket that comes with the AIO
@@JeffTheITGuy ok thanks, new to the pc world. So just trying to get everything right. Lol ive seen a few videos where people some kind of “water cooling screws” where you do not have to remove the motherboard, but thats taking short cuts.
I have the intel version, Do i need to change the mounting bracket?
More than likely. The stock bracket has tall standoffs. You can try without replacing then do it if you need to
I found a cooler that sounds better but what would be the difference in them. They have the exact name but the one I looking at doesn’t have the V2 also the pump dimensions are a little bigger than the one your using
V2 is just the updated one with a better pump and such
Nice
Would the Kraken X53 240 mm fit with the Omen 30L? or would I have to stick with the M22 120 mm since the spacing may be tight?
M22 only
@@JeffTheITGuy Ty for the quick response! I was just peeling through some reddit posts saying the same thing. Is the M22 just as good in comparison to the one you installed?
@@Mattduncan78 yeah absolutely
I’m having trouble getting the lights to work? Where did you connect the rgb connectors?
There is an extra RGB cable or was in mine in the top that was taped down.
@@JeffTheITGuy I ended up just getting a sata to molex adapter. It worked great! In case you still were looking for a solution! Thanks for the vid man! It helped tremendously
Do you have any idea on Changing the case? I like the case but it’s a bit too small for my liking
Yeah you can change the case. I like the H510 and Phanteks P400
@@JeffTheITGuy as far the motherboard goes, it doesn’t have any more fan ports does it? Unless I’m blind haha, thanks for the help too !
@@phrzy no it doesn’t
Can you put a 240mm liquid cooler in this pc?
No, there's not enough room at the top. even if it had the holes, the hard drives at the front block it.
Can i use the NZXT Kraken M22 120mm - RL-KRM22-01 for this too or nah
Yeah the M22 will work.
I enjoyed this tutorial for its authenticity and I am going to give honest & fair criticism,
1.) If youre going to do an Ad roll, the speaker should either be not inside the video footage of the Ad or offset to the actual Ad image itself,
2.) I can tell you are using some type of LED backdrop lighting because it is literally reflecting off your skin causing minor facial distortion. Turn down the brightness/saturation slightly and add some ambient back lighting. There are tons of videos online covering this topic but just watch some "professional" podcasters/tutorialists and you can see their basic lighting setup. Some podcasters add posters, bookshelves, etc to absorb some of the light being reflected inside their environment. The eye and optical eye are very interesting in how they absorb and process light.
Keep it up, good job, and give me a video of the actuall tool kit you used, there aren't many in-depths on that subject.
Thanks for the feedback. The light is from LED soft boxes and I had the iso up too high. It is definitely a learning experience for me. This is the first time doing an ad so also learning experience. And I can probably arrange the video of the tool kit.
Thanks!
@@JeffTheITGuy 'practice does not make perfect; only perfect practice makes perfect.' -Vince Lombardi- Once you get the settings dialed in, you'll be alright, take care bo!
My bracket doesn’t fit to the back of the motherboard to where the adhesive is touching any recommendations?
Which bracket? You have to use the Intel one
@@JeffTheITGuy yeah there was only one all black bracket that will fit on the back of the motherboard right ? Theres little bumps where the silver part goes through the mother board to screw in so it doesn’t sit flush on the back of the motherboard
@@dominicmussomele3260 the bracket has two sides. One for AMD and one for Intel. I would suggested looking at the instructions and making sure.
hey question! if i wanted to buy one of the nzxt liquid coolers, would i be able to install it on the hp omen 30l?
Yeah the 120mm like the M22
@@JeffTheITGuy the nzxt have 3.0 usb for lights where I can put that
@@MasterGamerBR1 a usb header on the motherboard. If you don’t have a header available you can get an internal USB Splitter
Good tutorial but you failed to explain will you use the Intel or the AMD mounting kit? I will do this to a friends 30L but no one seems to explain this. Can you please tell me?
Thank you.
You have to use the Intel due to the spacing
@@JeffTheITGuy Thank you
@@Teksers you’re welcome
How come my plugs aren’t plugging in?
Btw if u buy one with one already installed they dont remove these plates so there wont be airflow
True that
I really need to do this, my Omen averages about 82c when gaming and the fan is constantly running like a jet engine.
Yeah it is worth it
Did you check your advanced power options? Hp has the processor running at max as the default.
Will this make my room cooler? I live in Florida and my pc makes my room extremely hot
Nope, it'll dispel more heat into your room but your PC will stay cooler
@@JeffTheITGuy gotcha thanks
I need help im installing this right now. When i put on the back bracket with the adhesive and screwed it in. Is it supposed to be loose on the mobo. Shouldnt it be tight ?
It’ll be a little loose
@@JeffTheITGuy thank you for the fast reply thank u !!! I will post the results brother 😅
I heard there were some adaptor brackets that you could use to avoid taking out the mobo.
There could be. I have not seen them which I didn’t try to look either....
Justin can you post a link to said adapter? Almost seems it’d be better to just find a aio with 0 RGB.
@@XDaWsOnX2 I 100% used the CM because of its price.
Jeff The IT Guy I was really considering adding a AIO or a Mobo upgrade but damn they have made it a super pain.
@@XDaWsOnX2 LOL yeah it is
Greetings. Do u know if its room for a ek waterblock?
Doubt it. It’s a right squeeze
hey, i have a 10700k with AIO and for some reason launching certain games my AIO sounds like its a jettt engine taking off. is this normal? :D its a omen 30l with 3080
Oh yeah that’s normal. The 10700K is a hot boy. My suggestion would be to upgrade all the fans in the case like the ones I used here in this video. It’ll help drop your temps all across the board .
I have a omen 30l and I just got the same aio. My cpu has one “ CPU/ Pump fan” slot . What do I need to plug the fan into?? Or do I need to split that slot with a y split cable and plug the pump and the pump fan into it. Plz reply
Hi, you can plug the AIO into the CPU pump and there should be a fan connection around the CPU/Pump. If not you can totally use a splitter
@@JeffTheITGuy there is a LC_FAN near the top to the right. Will that work for the radiator fan?
@@bryshaunporter4782 yeah
Help does this cpu cooler work on the 30L Ryzen 7 3700x/ 2060/ 16gb Pc ? it looks similar to mine ???
Yes.
20:35 "we run"? Your the only dude doing some IT things lol.
Are there any ways to lower gpu temps for this pc?
Install better front and rear fans
whats the tools (screw) name that u used to take the 4 screws out of the CPU fan , i cant find one that fits
Just a Phillips
@@JeffTheITGuy i used a phillips set i have and nun of them work :(
@@cobrx9024 hmm. Try a torx
@@JeffTheITGuy ok ill let u know cause i have to buy one
you can do this without taking the motherboards backplate off, just use the stock backplate and get a sata to molex adapter and a 4 piece water cooler screws and cut a centimeter off, it doesn't need to be perfect just close to it, and attach the LGA mounts to the block and put the paste on take off the sticker and mount everything, my temps, at idle its 105 F 41 C, and in game for 20+ mins its 130 F 54 C.
So can you mount a noctua U9S with this method? Would you use an lga1200 u9s on an am4 processor?
Installed a Corsair h60 now my left ram slot won’t work. No pins are messed up. Two other users on Reddit had the same issue any help??
That is very strange. Did you make sure it is seated all the way? Did you clamp too hard on the cooler
@@JeffTheITGuy I adjusted everyscrew on the mobo and the cooler itself. I’m gonna order one 16bg ram stick and use Ryzen master to get the most out of it. Pretty lame I’m here now. Thanks for the response
Is it possible to change the motherboard on the pc I have the same one and I want to make some upgrades.
Yeah I have a video about it here on the channel
@@JeffTheITGuy thanks man
what’s a way you can do this without removing the motherboard
You can’t. Unless you can source one of the Cooler Master HP Omen Water Coolers from eBay
Does the 2 fan cooler master work?
Will you check if this fan will work www.bestbuy.com/site/cooler-master-masterliquid-ml240l-rgb-120mm-processor-liquid-cooling-system-with-rgb-lighting-black/6303592.p?skuId=6303592
Hello, I also have an HP Omen 30L but with a Ryzen 9 3900x and I always idle with the standard cooler so about 60-65 degrees would this AIO also bring something to my system?
Is your standard cooler an air cooler? If so, then yes it will help tremendously
@@JeffTheITGuy Yes, I had a small standard cooler on it and now I have a Be Quiet pure rock, but this doesn't really help much
@@racer20210 I see yeah, due to the limited air cooling in the HP Omen an AIO works better
Watched a bunch of videos, I just opted to get a new motherboard, new case, and a 240mm AIO. Going to put it all together soon, hopefully I don't screw something up haha.
Sounds like fun!!!!
I installed the notura air cooler and used toilet paper to remove the old thermal paste and pulling the board was simple. I preferred the air over water. Part of me screams don't put any liquid period near my electronics it is bound to break
Noctua is great!
@@JeffTheITGuy I went with the u9s brought my twmps down from 93 at full load to 72 at full load
does this work with a 140mm version
Only 120mm
Can I still do this with the cross air version?
Cross air or Corsair?