Must Have Tools For Painting A Car At Home Part 1 of 2 - Kevin Tetz & Eastwood
Vložit
- čas přidán 10. 06. 2015
- Kevin Tetz, America's paint expert, walks through his shop and shares what he considers to be the must have tools for painting at home in this 2-part video.
LINK TO BUY MIG 175 WELDER: www.eastwood.com/eastwood-mig...
LINK TO BUY SOFT SANDERS: www.eastwood.com/soft-sanders...
LINK TO BUY CONCOURS PRO Paint Gun: www.eastwood.com/concours-pro...
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.com/blog
ARE YOU AN EASTWOOD GUY? - Auta a dopravní prostředky
For anyone watching....you dont need a 60 gallon air compressor, get a 30 gallon 120v compressor and a LVLP spray gun, you can paint a car without having to buy the same compressor used in a full industrial paint shop. If you have the moeny to spend thats another thing, but if you are poor dont think you just cant do the work because you absolutely can paint your car with a LVLP gun and smaller compressor. You need to check your CFM airflow on the compressor and make sure your LVLP gun falls under that CFM the compressor puts out.
Great video! You almost covered Eastwood's entire catalog for painting in this video.
I’m 20 years old, have been building my 79 z28 since I was 16, finally have the car finished mechanically, and have been watching your paint series over and over again as I’m doing bodywork because I’ve never done bodywork before much less paint, but hey you’ve gotta start somewhere. But after watching your series, I’m ready to shoot the paint this weekend! Thanks man! Shout out to Eastwood also for most of my supplies
how did it turn out?
I'm amazed it's never boring. I been watching you're videos and I'm learning a lot. excellent job. Thank you
Notice his black thumbnail war wound? This dude actually works on stuff... not just a TV personality. Thanks bro, great video!
I have watched you on tv for a very long time I would say least 20 or 25 years. Your the best on tv
How to paint candy on candy
I'm getting ready to paint my 66 Barracuda, should be ready in about a week. i am watching videos to keep my passion fueled, and stay informed. It's a lot of friggen work, a lot more physical than I've ever imagined. first and last car i will ever restore. it's a good thing i love her.
Kevin i am watching u from germany you r really competent and nice Person...
Great video, I’m from Tennessee also, I’m a beginner and learning from your videos
Wow, this is just the video I was looking for. Thanks, Kev!
really appreciate these videos very very informative. im a mechanic tech with no body paint experience that being said. i reconstructed the front of my tenth anniversary 99 miata the paint cracked all the way to the metal all the way around the front when i got wrecked. sanded the whole car down to base metal and am going to paint it two tone sky blue with 4-5in of white at the bottom. watching half a dozen of these live videos i feel confident i know what im doing to make the car look great at the end.
Very informative video Kevin. I have gone through most of your videos seeking the knowledge of paint types/systems right from body work till final glossy finish, but haven't found any. can you please make a separate video to guide us about these different paint types and also would appreciate if you can guide as how to distinguish between different systems and their pros and cons.
Kevin is the most entertaining person for this kind of stuff. I like the spray paint videos he did.
SOY JOSE MARIA.. DE ARGENTINA MUY BUENOS LOS VÍDEOS. ESTOY RECONSTRUYENDO UN CHEVY HACE ONCE AÑOS JAJA.. Y SUS VÍDEOS DAN UNA NOCIÓN DE COMO HACER LOS TRABAJOS DE UNA MEJOR MANERA!!
Excellent video!
"Play with the dog, walk the kids " 😂😂😂😂😂😂
Thanks Kev for all the videos I'm watching here in Australia. I would like to see a video on how to sandblast a car body, what size air compressor to use and what blasting material to use as I want to restore my old 450 SEL 6.9 Mercedes.
It is a shame that this isn't getting more views. I wish that the camera would zoom in when he is showing us products that he is explaining for us newbies.
thank u sir for more idea...i learn more from u...
Im stripping down my 77 firebird formula was my gramps car from dealership in 1977 than he had it in bar for 15 + years has 79,000miles on car . Than he started restoring it found out he was dying from.cancer tha t I bought it off him before he past away . Love ur shows bee watching ya for 20 years . Much love from lethbridge Alberta canada 🇨🇦
This is phenomenal information for a knucklehead like me LoL 🤣 thank you 😊
Great info and giant commercial. Good job Kevin, I bet those producers were pushing info in your headset and then telling you to breath and slow down then speed up. Better you then me. Ha ha
wow nice tools 👍 perfect
awesome video...
There are LINKS TO BUY some of the products mentioned in this video. For other items visit www.eastwood.com for everything you need to DO THE JOB RIGHT!
Eastwood Company You guys took all my willful money from me, donate me a sanding block :) lol
yall have a lot of nice stuff and alot of choices but im afraid to buy your cheap chinese made tools again. I would have bought one of everything you guys sell by now but the quality from what i have seen from the things you put your name on is very poorly made so for the most part....i spend the extra money and buy all my tools from snap-on. start selling somthing that has made in usa on it and youll get my buisness back
Watching you from here in Crossville TN, I am in the middle of restoring a 66 Chevelle and I use Eastwood products I love there products and watching your videos is helping me a lot specially in the body work area of which I am not the best at but with your help I am gaining confidence to do the job right, I do have a question is it necessary to strip the whole car practically down to the metal before applying primer?
and he is an excellent technician is just that by endorsing eastwood he makes money easier.
I love my mig135
+Eastwood Company did you guys ever upload the paint planning template?
I’ve always wanted to know how to do body work . I’m 32 years old . Love old muscle cars .
what grit do you recommend for candy colors. It's my first time with a tri coat. and I have not picked up a spray gun in 35 years. starting to get back into auto body work to pick up some extra money, and just because I enjoy doing it mostly.
Note in future use some of that inch and half tape to cover up blue point logo on trolley''Haha''love your channel
When stripping paint by hand down to the sheet metal with sanding what is the finest grit you should sand to before you start doing anything else?
Recommend any Technics for fiberglass and patch work? Currently working on a moped for daily driver with broken panels
wish i had the need for a mobile workstation.. shop so small; need a hammer/dolly - reach to the left.. need grinders/drill - reach right.. anything else, search the attic, garage, or somewhere in my house..
Hello .. Mr. Kevin
plz help me about candy paint i want to know how to paint it and how to mix
thank you ..
I don’t need a welder to paint is a commercial for Eastwood !
Kevin,If I soda blast a corvette, what is the best sealer to use to protect the fiberglass as a do small repairs?
do you have a large ventilation system when you are doing your sanding to clear the air?
Thats allsome
How can you catch a regular sanding disc onto a orbital sanding pad
I want to do a respray on some fenders, what grit do you use to sand that down and do I just go straight to color and clear???
Just a quick question. What is the nest msskimg tspe to use. Amd masking paper? Tjsnls Kevin. Yoi have tsught me so much.👍🤟🏻👌😁
I just need your PM so when I am painting that I can ask you question!
With enough prep, and following up with enough wet sanding, and clear coats... is it possible to have a good job with spray paint rattle can?
I know you guys do cars But I'm a starting out luthier I fix and make guitars what do you recommend for an air compresser for finishes on guitars I heard 3.5 hp is good enough not sure the psi. I figure its a smaller job than autobody
How recent are the techniques in the paintucation videos. I'm real picky who I learn from.
This really helped me. But you did go back and forth
How do I prep galvanized body panels so they don't peel like the factory finish did? 94 Chevy K2500.
i have a car im working on and have 2k primer on it and have block sanded with 400 .i want to know if i sand down back to metal during blocking and guide coat do i need to spray self etching primer over the spots i have took back down to metal or what do you suggest
My dad used to live in Franklin
Would metal infused bondo work well instead of short strand Fiberglass bondo
Eastwood is cool. But have you heard of Harbor Freight?? Lol. Kidding. I have a MIG 135 promise
I have a question with plastic on a car it can cause static would you have to have the gun to get rid of it or can you have a ground underneath hook to the frame
How do you know what a good quality pain is what is usually the pain with ratio and really good quality pain
Where can I download the "plan your project " form to print?
Hay can you do a peroile green paint
How much paint to paint a car / truck ,gal.? Love the product, 100% great stuff !
A standard size car takes about a Gallon of Base and a Gallon of Clear.
A full size pickup might take a bit more of each, a soft top convertible will take a bit less.
Kevin what is the best spraygun for a small compressor
Where is the best place to install a dessicant whip? At the compressor end or the paint gun end, does it matter?
larryz24 Paint gun end is the best place. That way it reduces the chance of any moisture build up that could occur along the length of the air line. If you get a chance to see a painter in a booth, they'll often have a belt on that connects to the long air line and then they have the whip hose connected to the belt, going straight to the gun. Makes it easier to control the air line too as you only have to focus on the ~3 feet of hose.
Hi I’m wondering do Eastwood sell in Australia.
is the best way to get the old paint off with dustless blasting to get down to bare metal which saves a lot of sanding and then immediately spray metal prep to keep from rusting?
the absolute best way would be to media blast the car!
What is the best spray gun for your buck
I'm trying to better myself in automotive painting, I am restoring a 74 pontiac fire bird and I am looking for better painting techniques and lower costs for my budget
Bring back Tetz
Anyone know what the wet on wet primers and sealers are?
I will go with the biggest and less expensive co. I think you are remarketing the same product as less expensive co. What is your answer??
This my first time painting with a gun I got the black paint and thinner from your company and measurement cups with strain and stir sticks is there anything else that you think I need dont know how to determine how to get the right mixtures the first part I'm painting is the frame as soon as I'm ready
Is this what you're looking for? czcams.com/video/csH10VkBfxc/video.html
Kevin, how does the Eastwood concourse 2 hvlp paint gun kit 16287 compare & perform vs the concourse pro kit that you use & recommend in these paint videos? Keep in mind I am a beginner painting from home. Can i still get great results?
Kevin hasn't used the Concours 2 as of this date (3/5/18).
Eastwood Company I am seriously considering getting that paint gun. You have it on sale for $129. Is free shipping available as well?
17:36
He sound like he was about to freak out lol. But any real quality loving person, whether beginner or expert, know you must have all components ready to do any job and can't worry about so much on the price. Being cheap when you don't have to really hurt you in the long end.
Have a 69 F100...just starting on it and have never done any body work. Intimidating to me...certain parts are hard to get to with body hammer sets like the roof of this truck...How can I get to those hard to reach areas?
Would Bulls Eye Picks help? www.eastwood.com/eastwood-bullseye-picks.html
Eastwood please open a store in Hawaii you would kill it out here all the shops here has nothing even close to your products I tried ordering online from your website and half the stuff I ordered couldn't be shipped here because they can't air ship
Hi
kevin I'm a personne who never touch painting and i want to know which product to use for repainting car from scratch i was looking at por 15 to use as a primer and then expoxy primer and then finish paint and clear coat would that be good if not would like to know the con and pro and my second thing i dont have any compressor is it possible to use an electric gun instead thank you
andre
calgary alberta
Hi thank
yes the reason why i ask for the por 15 is for its strengh and for underneat the floor and engine bay to prevent rust and pealing of the paint
dvds for sale in australia?
don't you just change the filters on the mask to keep painting? and is there a place to have your mask inspected to see if it is still good and extend the service life?
Assuming your using the proper cartridge for the work at hand, if they're collecting dust or debris it'd say change them once you notice it's hard to pull through. Also for chemically filtering, say spraying 2 component paint, if I can smell it it's time to change filter. As always, best practices should be followed by manufacturers to be totally safe.
Who makes Eastwood's MIG welders?
are you still giving the dvds or have it missed that?
It's passed. DVDs are available here: www.eastwood.com/paintucation-6-dvd-set-53589.html
Hello Kevin Tetz, Eastwood, or to anyone in this industry,
I have been forced to change my career. My age is 49.5, I am an extreme perfectionist, I'm extremely detail oriented in everything I do, and I learn quickly. Lastly, I am OBSESSED with cars and trucks. I'm considering beginning a career in the auto-body, painting, and restoration industry. I was planning to retire at age 65... That gives me 15 years, or longer to learn, work hard, and try to be successful.
My question is: "Am I too old to begin a career in this particular industry?"
jeeeeeeezzzz 6 min before even he starts talking about what title is.
when someone says"they not gonna try to sell you anything " BS and this is testament to that .
What’s a DVD?
hey Kevin. what do I need for paint prep at home? thanks
how much ur air filter sir?
How do you blame new paint with your old paint
Play with the dog and walk the kids ... LOL
why would i need a welder to paint a car?
I think a LOT of people are confusing painting a car with a restoration of a car.
When I think of painting a car I think of just that putting color on a car, not all the crap that has to be done to restore a car before paint.
Can you post a video on what you need to actually JUST paint a car at home?....like minus the car restoration that comes before the paint
We have another video focused on just body work and paint. Check it out here: czcams.com/video/Lw0ObOdWnRE/video.html
I've got a question, actually few questions.
You see, in my country, we devide body work from paint jobs works (one guy does one, the othet dude does the second). I would like to specialize for paint jobs. Ive already got a guy that does a great job with body work, so its on me to paint it and just finish up his work (filler etc) therefore i dont need a gun for dents and such. I want to learn about paint guns, fillers, primers and more. Cars only.
So, i need a air compressor, air gun, paint gun(s), fillers, plastic for mixing and putting filler on car, sand paper (or orbital sander).
Can you help me out with picking whats necessary? From tools, sand paper, orbital sander and all that. Or drop a link of forum that i can search for all that. Thanks in advance. Cheers
Check out this video which has a link to get a complete list of instructions and products needed: czcams.com/video/Lw0ObOdWnRE/video.html
Lol. He seceritely picks on Lincon and Miller without saying the names XD.
Do you wear gloves working with filler
Best practices would be to wear gloves, filler can dry your hands out a bit.
Honda civca
"86" this lmao....former server talk lol
2356hrs and I'm still not done :(
6:18 :0
PLAY WITH THE DOG AND WALK THE KIDS..LOL ITS LIVE VIDEO, U NEVER KNOW WHAT MAY HAPPEN..LOL
Kinda obvious to not trust any man who were on the love of my life, before me....
Too much chatter
all he does is push eastwood products he is not teaching shit.
I know right. It feels more like an infomercial rather than a demonstrative video. Pretty sure he's related to the Sham-Wow douche.
Did you even read the title of the video? Where did they say he was going to teach?
Comes to an EASTWOOD sponsored video describing what tools to have, and complains they try to sell him EASTWOOD products. Were you expecting a Snap On commercial you fucking genius!?!?
You reminds me of Richard Dreyfus.... He talks too much.
You talk to damm much
How about less promoting and more work
more than 3 mins of blah blah blah..