Video není dostupné.
Omlouváme se.
Epson desktop print head cleaning with PHD-M
Vložit
- čas přidán 23. 01. 2017
- Print Head Doctor Mobile (PHD-M) is a portable print head maintenance and recovery machine that can unclog any piezo inkjet print head directly on a printer.
FEATURES:
● Fluid pre-heating up to 45°C.
● Automatic and precision pressure control up to 15 psi
● Vacuum and pressure.
● Rechargeable battery for a cordless operation.
● Easy to carry around using a handle.
● The waste bottle is housed within the machine.
The flex tray shown on this video can be used on any printer with a fixed head position. It only needs 1.5mm of clearance.
For UV printers with adjustable head position, use a Low Profile Tray (not shown here).
See us at www.PrintHeadDoctor.com
me interesa equipo para destapar cabezales de epson. sobre todo para la serie L
Hello this machine working with print head ricoh gen 4
Hello .
I'm from Brazil and I would like to know if you sell a machine like this for min.
Sincerely listening to your response. thank you . Your video is incredible.
hello sir what is the price this desktop epson printer print head clening machine?
price?
Hi how much is this, i hope do have available to order online and ship overseas..
This machine starts at $690. We can ship overseas. www.digitalsigntech.net/print-head-doctor-mobile.html
How to order
digitalsigntech.net/PrintHeadDoctor/print-head-doctor-mobile.html
Hi send emails and comments for here but no have answers
Where to buy
digitalsigntech.net/PrintHeadDoctor/print-head-doctor-mobile.html
Pumping liquid into the head is a flawed method.
The liquid must be pump out of the head.
Direct pressure can easily ruin the head.
You are right. Any pressure higher than 2 psi can damage an Epson head. That's why we are bleeding fluid into the head at a very low pressure. If you connect the vacuum tube to the print head, you can pump it out of it, but only a tiny amount that's already inside. This is the best you can do without removing a print head.
@@digitalsigntech therefore, the head must be removed and cleaned correctly by pumping liquid out of it
@@miklfaradey7306 You can pump the fluid out of a print head without removing it from a printer. Just connect the vacuum tube to it and run the PHD-M machine for a few seconds.