Great videos! Would you happen to know if this repair can be done in the engine compartment for a 2010 Lincoln MKT? I have some concerns with the clearance in that engine compartment.
Most thorough Ford repair videos on the internet. Brian, I've said this before, you are an asset to the Ford community. Thanks for taking the time and effort to create these vids. Thanks for being open to questions.
First off, THANK YOU for your MILITARY SERVICE! Secondly, your focus on the job at hand is LEGENDARY! Last but not least, your DISCIPLINE answering (or not) some of these EGOBOOST haters/challengers/doubters in the comments section is just AWESOME!
@@jasonplank8803 How long did the job take you and what did you spend on parts and special tools? And how many miles on your Ecoboost when you took this job on. Congratulations on a successful job!
I’m actually doing this on my truck now, and can honestly say it would’ve been 1000x’s harder without this video, even with the TSB instructions I printed out from Ford. Only thing is ford calls for 9 hours lol it takes much longer. I took the inter cooler out which I think is a must. Hardest part is actually getting everything off to get to the chain and phasers. And last thing is he doesn’t change the secondary tensioners because they were ok but they come in the kit and mine were showing signs of wear so I swapped them out as well
@@jrolla1858 what kit did you get? I was trying to go Ford OEM all the way if I could just having a hard time finding the parts for things like the guides and Tensioners. BL3Z-6D256-C has several parts in it but not the guides and tensioners. I don't know much about Melling and thought about getting their kit along with the BL3Z-6D256-C kit but that would leave me with two primary chains since both include one. Thanks for any info if you get around to it.
This is what you hope all mechanics aspire to be. This guy is the only guy I want working on my truck. I love the professionalism and willingness to change out all of the proper seals, o-rings, etc. Excellent video!
Thank you so much for these videos. I am a tech we work on all makes all models. And anytime I have Ford issues. I always look for your videos. You helped a lot during the chains on the last 5.4 I did. Keep up the good work !
just finished part 1. Absolutely amazing content! Blown away by the thoroughness and quality. Looking to buy a used 3.5 eco this weekend and wanted to know if I can do this under the shade of a tree. Thanks for this amazing work
Thanks for the Video's, My dad and I are following them and find them very helpful. Turns out both fords we own needed to change the Chains and we did not want to pay a garage a small fortune in our area. Lifesaver!
Hey now! aRE YOU me? I have the same truck and so far so good for me too,...I get a rattle about once a month maybe less! but I am watching this getting ready for the worst!
70carlton I had this my 2011 f150 eco boost 1 time which lasted 1-2 sec so I thought I added small can of wynns engine tune up for cleaning lifters and rings to the oil , I was thinking the problem was tensioner either sticky or not enough oil getting to it fast enough . I did add the wynns engine tune up ran the engine for several 15 min intervals left it over night ran again 15 to warm up no noise changed the oil and filter with good quality synthetic 5-30 and 6 oz motor kote no more rattle .
In hind sight , the engine does have 100,000 miles on it and it about that time for a timing chain . Still, there is a lot going on under that cover. Your customer is fortunate to have found you. I can also see why ford wants you to run light weight oil in that engine. Lubrication is a must as well as matiance. You do nice work. Thanks again.
Any chance Ford covers this out of warranty? Seems like a total design flaw on their part timing chains should not be stretching enough to cause this at such low mileage.....
Great video! very detailed! you do a fantastic job! and your new shop is incredible. You really know Ford engines extremely well! Stunning job! love it!!
Have you considered creating a video showing the behind the scenes organization that you do on a major project like this? It'd be great to see how you keep bolts organized with parts, etc. Excellent video series that I hope to never need!
About to do my 11 ecoboost. 226k km Thanks for the video, so well detailed. I already saved the turbos that had seized wastegates. Removed the hot side of the turbo. Removed the wastegate flapper, cleaned everything really well and welded that tab back on for the wastegate actuator. Its been working great, until about two months ago… (when I started having my current issue which is the timing chain)
Awesome job! Man you are good! That coolant tube under the timing cover is what Ford engineering has now suggested needs replaced ...as well as the water pump and o rings, gaskets etc...for the persistent leak on my 2018 Raptor ecoboost...this will be try #3 at the dealer.. really not too confident in these motors now.. I think it's back to a 5.0 or 5.2 voodoo engine for me after watching this video, cuz I don't have your knowledge or skill. Thank you for the video
Brother you are so detail, you are a master teacher for real, I will do it to my truck that is sound loud, iam not mechanic but I got this vid and I will do exact as you teach here. God bless you and your family, in Jesus name amen
Mr. Makuloco Sir, thanks for the great video, everything you do is so important for folk that want to save money and learn how learn to fix their own vehicle. Again Thanks Respectfully; Andy
Thank you for pointing out all the details that most people take for granted what a complicated process for a water pump.do it wrong and the engine will be junk thanks again
Have you ever found metal shavings in packed in the vct solenoid screens? I'm working on a 2011 3.5 eco, the chain was still intact but the sprockets were worn, all that metal went past the oil pickup, filter and packed up the vct solenoids so i pulled the cam bearing caps. Sure enough the cams and bearing caps were damaged I'm sure the rods and mains are damaged as well. A stretched timing chain has turned into my buddy needing a new engine. 115,000 miles oil changes every 3,000 miles with ford oil and filter. This is a heads up to people doing this job. CHECK those vct solenoids for metal shavings.
Thank you so much for making all these timing chain videos. I have actually used it to show how to get to the oil pump, as mine went bad, and your videos are SO detailed and amazing. Again thank you so much man. I do have one question, what happens when the timing marks don’t line up and I can’t get the cam shaft tool on?
I had mine replaced by the dealer at 70,000 Km's. I'm now at 102,000 Km's and it just started with the rattle again!! Why would this happen again?? I thought the last TSB was a permanent fix? Will this just continue to happen if I get it fixed again? It's a 2011 F150 3.5 ecoboost and has always been serviced at the dealer. Thanks for any and all help! Great video! Thank you for taking the time to make it!
Hi, I would ask the dealer if they replaced the van phasers and the secondary chains/ tensioners. If you just go in and replace the main chain it can possible happen again.
At 41:57 the seal that you slide on. In Part 4 you show the same seal and you're putting it in the timing cover plate. I think you have to put this seal in the cover and slide the seal on with the cover plate. That's what I had to do.
This engine is pretty clean and well maintained, why it has stretched timing chain ! look at the cam loops, no single scratch. Even those Chevy V6 engines.
What is the book time for this repair? I usually don't work on smaller trucks like these but I have a client who wants it done. How many hours does it take you?
Very well made video Thank you !! As for timing cover sealant, I have used Dirko bond (German sealant) b4 on Porsche, Audi, BMW, ect. Seems to work fine and have no issues
Great video!!!! Very helpful. I was wondering where to get a complete oem timing chain kit(camphasers, water pump, chain, guides,etc.)? Or product that is equivalent. Thank you
I have a 2015 Lincoln Navigator 3.5 ecoboost. Will the listed parts apply to my engine too? Thanks a million! I’ve been watching your videos for years! You helped me with my 2005 F150 5.4 3v!!!
If you are rebuilding the timing chain on this engine, I highly recommend to change the water pump, because if that crap fail ( which is often) you can go back and take the whole engine apart and if lucky, you might be able to save it
I love your videos! I am preparing to tear apart a 2017 Ford mustang 5.0 and I was wondering if you have any links or help with a guide on the proper timing procedure?
How much does this job cost. I need my 3.5 done I'm just worried about it not getting done and cleaned up right. Were the mechanic trying to skip doing something because they're lazy and then charging me for it I've actually had that done to me before.
I want to go back to the engine they had in the 60s anybody could work on it you needed a bare minimum in tools and they would run forever! All this plastic engine parts and exotic parts and specialty tools!
Is it worthwhile to pull the condenser and radiator so you can sit on a stool facing the motor to do all the timing chaing work? You're 2 hours into this and my back is aching just watching it! and you know exactly what you're doing!!
Seems like a very good time to clean the intake valves and install a catch can. My truck just started making this noise. It isn't terrible yet. Any guess how long before it becomes a serious problem?
At least the phasors are pinned to the cams. Better than the 4.0L S-O-H-C. Probably, the reason there isn't much in the Aftermarket area is that this engine is strained to near its mechanical and strength limit. Just a thought.
Can you tell me if there is a complete kit that includes timing chain and phasers seal etc ... or do I have to purchase separately .... Awesome video .. Thank you
Great video series. I have a 2011 F150 with an intermittent start up noise on my 3.5. I was quoted $1,800 to $2,200 to complete this job. Does this sound reasonable? It’s a big job, A service advisor said Ford allows 10 to 12 hours of labor to complete it.
Nathan Johnston I had the same chain rattle I added small can of wynns engine tune up for lifters and stuck rings my reasoning was that the tensioners might be sticking or the oil lines to the tensioner was clogging any way I ran it for 15 min in park let it sit overnight started the next day ran for 15 min , started it again let it sit for a few days restarted ran in park 15 -20 min No noise . Changed oil and filter added 6 oz of motor kote and 5-30 synthetic oil and new premium oil filter no noise since , I am working on the truck and won’t get on the road till spring as I just welded in cab corners rockers with my welder and prepped primed and covered with bed liner but the weather here in Ontario Canada has turned to cold to do much else outside and I need to get front vac hubs ,differential clutches ,brakes ,touch up paint and get 2 new tires then safety check at local shop
@fordtechmakuloco I just had my 2012 3.5 done.. all vcts, phasers, guides chains were you replaced. after a short drive home 30 miles from the shop it jumped timing..we dont see clear conclusive evidence that is hit a rod but we do see tiny mark that it may have hit a rod on the piston but my question to you is why did it jump timing, did one of the new components fail?
Thank you for the video. I have a bad water pump on a 2012 MKT its been 5 months nobody wants to work on it. not even the dealer they offered me a new engine for $9k instead...I'm at the point where I want to fix it myself. but the engine locked up when water pump went out because it was running on highway when it happened. can i still change it the water pump even though the engine locked up or was any other critical damage?... Thank you in advance for any experienced input.
Good day Sr, I got a question for you I have a 2013 Ford 150 3.5 ecoobost with bad engine I’m home I have and 2009 ford edge for a customer….. never come back long story .. the edge have on it a 3.5 engine that’s same engine ?
Replacing the water pump. I am trying to align my camshaft pulleys and crankshaft sprocket to the proper position. My left camshaft pulley is close to being in the correct position, my right is way off. Now I can't turn the crankshaft any further. I am in a bind because now I feel like I have completely messed up my engine timing and the crankshaft bolt won't turn anymore, and I am afraid to force it in fear of breaking the bolt. Do you have any guidance on how to remedy this.
ok i know this is an old video but please i need help, my timing chain slipped and i have no idea where i should line the crank timing mark and the cam timing marks before i install a new chain, Does it matter as long as the chain marks line up with the gear marks?
Question i hope can be answered. On my crank sproket, it only lines up at the 2 o'clock postion when my phasers are lined up like the video. I've turned it over several times, but when phraser dots are like the video the crank sproket dot is 2 o'clock postion. Any thoughts
Well I have 320k miles all original miles. Water pump failed so I decided to dive behind it and do this job too. I currently waiting on additional parts. Phaser chains had worn the tensioners, crank pulley had a slight grove from the seal. I replaced the oil pump with a melling while I was right there. Crank sprocket showed wear as well. Timing chain guides looked ok but cheap enough to replace. A few other various wear parts I thought would be smart to replace as well. Thanks for a well made video. Some how I had it 180 degrees out when I pulled it all off. Had to move the crank to clearance position and set the cams. Oops.
I have the duratech 3.5 Taurus. I am taking the right-side phasers off in order to replace that upper chain guide. This secondary tensioner pushes down fairly easily. I noticed, just while checking things out that the left side secondary tensioner won't push down at all🤔. Does this mean that tensioner is shot? I wasn't planning to do anything to that side.
I know this is an old video, but hopefully you will reply. Why didn't you replace the 2 small upper chains that go on the phasers? Wouldn't they age the same as the main chain?
Did I miss it, or is there not a link to the cookie wheel for cleaning the gasket surface? I have also looked on Amazon, but so far not finding any like yours yet. Also, thanks for the videos.
Thank you so much for doing these videos you've literally saved me a ton of money! I love how detailed and precise you are on your break downs. The extra side tips are awesome too. Hands down your videos are a God send. I only have 1 question, I'm in the process of doing this exact same procedure on my 2011 Ford F150 ecoboost and I noticed after removing the phasers that the little nubs on the camshafts do not align 12 and 3 12 and 9 they are slightly off from that. Does this mean my camshafts are out of alignment and if so how do I correct this?
What I found out on the secondary chain tensioner, on the the left side of the engine, I seen that it wasn't pushing up on the chain, could you verify this process for replacing them. I took the one that I felt it was bad, I began to compress it about 3 times, and it released to full tension. My concern was I put both left and right tensioner new and once I pulled the plastic tab out they didn't spring up to full tension. I am hoping that I can remove the valve covers and plunge them down and get them to release to full tension. Was wondering if you have seen this problem?
How tight are the bolts? I am working on one and I'm worried about breaking the bolts or camshafts. Breaker bar and wrench on the camshaft but don't wanna budge
Great videos, I followed these to the t and installed new solenoids phasers and a complete timing set. I now am getting intermittent p0016 and p0017 codes. My actual versus desired on both exhaust cams is exactly 5° all the time and holds a very steady. Did I set the timing wrong?
Your the best. God is really using you with your amazing gift of teaching. Jesus Loves you, and I pray for blessings over your business in Jesus's name.
Thats some tedious work, people like him deserve every penny for that job, paying for what they know, instead of Bubba with the chain hanging from the tree
These are the Tools and Parts I Recommend:
****LATEST PARTS****
Intake Phaser (2 Required)-
amzn.to/2IBfdDc
Exhaust Phaser (2 Required)-
amzn.to/2u55yS7
Intake Phaser Bolt (2 Required)-
amzn.to/2u3Nech
Exhaust Phaser Bolt (2 Required)-
amzn.to/2FV0xx6
Primary Timing Chain-
amzn.to/2IGlKwy
Timing Chain Tensioner-
amzn.to/2GpN14E
Intake gaskets-
amzn.to/2FYsBPW
Valve Cover Gasket Drivers Side (All Years)-
amzn.to/2FROlBe
Valve Cover Gasket Passenger Side (2011-2012)-
amzn.to/2pr2dXY
Valve Cover Gasket Passenger Side (2013-2015)-)-
DL3Z-6584-C
High Pressure Fuel Pump O-Ring-
amzn.to/2FW19Cs
High Pressure Fuel Pump Mounting Gasket-
amzn.to/2pxj6QP
Water Pump Gasket-
amzn.to/2pvVWum
Pump O-Ring-
amzn.to/2psqCfX
Coolant Inlet Seal-
amzn.to/2prwJSw
Front Crankshaft Seal-
amzn.to/2prBfjZ
Front Cover Radial Seal-
amzn.to/2u59yC7
Crankshaft Pulley Bolt-
amzn.to/2u7P2kt
Motorcraft Front Cover Sealant (MUST USE)-
amzn.to/2psPqo2
Motorcraft OAT Coolant (3-4 Gallons Required)-
amzn.to/2prxpY4
Engine Oil 5w-30 (6qts Required)-
amzn.to/2GLtahd
Crankshaft Pulley Remover-
amzn.to/2G0lS8s
Camshaft Holding Tools-
amzn.to/2FXx7yd
Secondary Tensioner Holding Tool-
amzn.to/2FWeKcR
Cat Claw-
amzn.to/2IBBJM6
Scotch Brite Cleaning Pads-
amzn.to/2Ga6GbV
Air Wand-
amzn.to/2DIe74L
Vacuum Bleeder-
amzn.to/2FWdWol
Oil Catch Can Kit-
amzn.to/2pnZvn1
****OPTIONAL PARTS YOU MAY WANT TO REPLACE****
Engine Valley Coolant Pipe O-Rings (2 Required)-
amzn.to/2HPpYAC
Degas Bottle Heater Hose (Common to Leak)-
amzn.to/2HRq3Up TORQUE SEQUENCE AND SPECS:
Front Cover-
drive.google.com/file/d/1vvzqqEtyVb-ncDzoaGumVRJ8ZsoMr3xR/view?usp=sharing
LH Valve Cover-
drive.google.com/file/d/1_N1FFgp0ApZTaHuCum4muzBNVfigww_G/view?usp=sharing
2011-2012 RH Valve Cover-
drive.google.com/file/d/1O-QxJdoZ2r1wIKJErGMkkRhMRkuu2pX4/view?usp=sharing
2013 and Newer RH Valve Cover-
drive.google.com/file/d/1IL0rZz7uJLkS61bhPm24raulzfJoFBAb/view?usp=sharing
Intake Manifold-
drive.google.com/file/d/1W3s3GzR7T69OzV35Ehrm8-kf86eCZNFG/view?usp=sharing
Water Pump-
drive.google.com/file/d/1WdDoFxPYrGkam6PjeJr8B3RH0lhhm76T/view?usp=sharing
Thermostat Crossover-
drive.google.com/file/d/1f6_ZJOi2He-iLdAvcOO3fEmc1hh5yrIZ/view?usp=sharing
None of the links are working at this time, where could I find the actual part numbers for the latest parts?Thanks
Do you have a list of parts for a 2017 f150 eco boost
Can you please give us the part number and where to buy
the front crankcase seal driver tool ?
Where can I find that tool to pound the front seal in? Thanks for the list and video btw it's very helpful!
Great videos! Would you happen to know if this repair can be done in the engine compartment for a 2010 Lincoln MKT? I have some concerns with the clearance in that engine compartment.
Most thorough Ford repair videos on the internet. Brian, I've said this before, you are an asset to the Ford community.
Thanks for taking the time and effort to create these vids. Thanks for being open to questions.
First off, THANK YOU for your MILITARY SERVICE! Secondly, your focus on the job at hand is LEGENDARY! Last but not least, your DISCIPLINE answering (or not) some of these EGOBOOST haters/challengers/doubters in the comments section is just AWESOME!
Just finished this process, and I couldn't have done it without this video series! I'm so grateful for this series. Thank you so much.
Such a well made video man. Makes me honestly feel like I can do this with a laptop set up next to me playing your video!
That is what I did. I was able to complete the job (successfully).
@@jasonplank8803 How long did the job take you and what did you spend on parts and special tools? And how many miles on your Ecoboost when you took this job on. Congratulations on a successful job!
I’m actually doing this on my truck now, and can honestly say it would’ve been 1000x’s harder without this video, even with the TSB instructions I printed out from Ford. Only thing is ford calls for 9 hours lol it takes much longer. I took the inter cooler out which I think is a must. Hardest part is actually getting everything off to get to the chain and phasers. And last thing is he doesn’t change the secondary tensioners because they were ok but they come in the kit and mine were showing signs of wear so I swapped them out as well
@@jrolla1858 what kit did you get? I was trying to go Ford OEM all the way if I could just having a hard time finding the parts for things like the guides and Tensioners. BL3Z-6D256-C has several parts in it but not the guides and tensioners. I don't know much about Melling and thought about getting their kit along with the BL3Z-6D256-C kit but that would leave me with two primary chains since both include one. Thanks for any info if you get around to it.
2011 platinum EcoBoost here 102× and heard the noise just once and now im getting ready to do this myself. Thank you the detailed video.
This is what you hope all mechanics aspire to be. This guy is the only guy I want working on my truck. I love the professionalism and willingness to change out all of the proper seals, o-rings, etc. Excellent video!
I'm a FEDEX retired master tech. This video is excellent, I can see you take time to do repairs correct with using proper tools and knowledge
Thank you so much for these videos. I am a tech we work on all makes all models. And anytime I have Ford issues. I always look for your videos. You helped a lot during the chains on the last 5.4 I did. Keep up the good work !
just finished part 1. Absolutely amazing content! Blown away by the thoroughness and quality. Looking to buy a used 3.5 eco this weekend and wanted to know if I can do this under the shade of a tree. Thanks for this amazing work
Wow! You put together some great videos. Your style and presentation is top notch. Very well done. Great job 👍
Thanks for the Video's, My dad and I are following them and find them very helpful.
Turns out both fords we own needed to change the Chains and we did not want to pay a garage a small fortune in our area.
Lifesaver!
Super happy you made this series...I have a 13 ecoboost with 100k...oil has been changed on time...so far so good...
Hey now! aRE YOU me? I have the same truck and so far so good for me too,...I get a rattle about once a month maybe less! but I am watching this getting ready for the worst!
70carlton I had this my 2011 f150 eco boost 1 time which lasted 1-2 sec so I thought I added small can of wynns engine tune up for cleaning lifters and rings to the oil , I was thinking the problem was tensioner either sticky or not enough oil getting to it fast enough . I did add the wynns engine tune up ran the engine for several 15 min intervals left it over night ran again 15 to warm up no noise changed the oil and filter with good quality synthetic 5-30 and 6 oz motor kote no more rattle .
In hind sight , the engine does have 100,000 miles on it and it about that time for a timing chain . Still, there is a lot going on under that cover. Your customer is fortunate to have found you. I can also see why ford wants you to run light weight oil in that engine. Lubrication is a must as well as matiance. You do nice work. Thanks again.
Gonna be doing this job on my 2017 Raptor. Thanks for the walk through
Any chance Ford covers this out of warranty? Seems like a total design flaw on their part timing chains should not be stretching enough to cause this at such low mileage.....
Great video! very detailed! you do a fantastic job! and your new shop is incredible. You really know Ford engines extremely well! Stunning job! love it!!
Have you considered creating a video showing the behind the scenes organization that you do on a major project like this? It'd be great to see how you keep bolts organized with parts, etc. Excellent video series that I hope to never need!
I have considered it yes and may soon in the future.
About to do my 11 ecoboost. 226k km Thanks for the video, so well detailed. I already saved the turbos that had seized wastegates. Removed the hot side of the turbo. Removed the wastegate flapper, cleaned everything really well and welded that tab back on for the wastegate actuator. Its been working great, until about two months ago… (when I started having my current issue which is the timing chain)
Awesome job! Man you are good!
That coolant tube under the timing cover is what Ford engineering has now suggested needs replaced ...as well as the water pump and o rings, gaskets etc...for the persistent leak on my 2018 Raptor ecoboost...this will be try #3 at the dealer.. really not too confident in these motors now..
I think it's back to a 5.0 or 5.2 voodoo engine for me after watching this video, cuz I don't have your knowledge or skill. Thank you for the video
Brother you are so detail, you are a master teacher for real, I will do it to my truck that is sound loud, iam not mechanic but I got this vid and I will do exact as you teach here. God bless you and your family, in Jesus name amen
Mr. Makuloco
Sir, thanks for the great video, everything you do is so important for folk that want to save money and learn how learn to fix their own vehicle. Again Thanks
Respectfully;
Andy
Thank you for pointing out all the details that most people take for granted what a complicated process for a water pump.do it wrong and the engine will be junk thanks again
Have you ever found metal shavings in packed in the vct solenoid screens?
I'm working on a 2011 3.5 eco, the chain was still intact but the sprockets were worn, all that metal went past the oil pickup, filter and packed up the vct solenoids so i pulled the cam bearing caps. Sure enough the cams and bearing caps were damaged I'm sure the rods and mains are damaged as well. A stretched timing chain has turned into my buddy needing a new engine. 115,000 miles oil changes every 3,000 miles with ford oil and filter.
This is a heads up to people doing this job. CHECK those vct solenoids for metal shavings.
Thank you so much for making all these timing chain videos. I have actually used it to show how to get to the oil pump, as mine went bad, and your videos are SO detailed and amazing. Again thank you so much man.
I do have one question, what happens when the timing marks don’t line up and I can’t get the cam shaft tool on?
Turn the camshafts ever so slightly so the tool can slip over them.
Thank you for your time and step by step instructions. I was just told my F150 has a leaking water pump. Take care bud.
Great vid. Thanks for taking the time to make such an in depth video.
Where did I see mentioned that there was a better Ford chain tensioner from an earlier model Ford engine that’ll work on a 3.5 ?
ive got one of those 3/8 long reach ratchets its got a lockable head its quite new really like it
Nice to know I'm not the only one that talks to myself
These videos are gold ! Keep up the great work
Great job with the video series Brian. Clear and precise.
Remember the old cork valve cover gaskets? ;-)
Not since my military days.
ahhhh the ford ecoboost....saving you $300 in gas and only costing you an extra $3000 in repairs in 100k miles.
I've got 218k mls on mine and its just now needing to be replaced thankfully. It was one of the repairs I had planned on quite a while ago.
@@robertlalum1461same mileage for me except on an explorer non-eb. Wish I had just done these when I had it open for the water pump 5k miles ago.
I have 229k first major an oil pump
Mine failed at 50K, and dealer cost is now $4900.
This is by far the hardest repair I've ever done
I had mine replaced by the dealer at 70,000 Km's. I'm now at 102,000 Km's and it just started with the rattle again!! Why would this happen again?? I thought the last TSB was a permanent fix? Will this just continue to happen if I get it fixed again? It's a 2011 F150 3.5 ecoboost and has always been serviced at the dealer. Thanks for any and all help! Great video! Thank you for taking the time to make it!
Hi, I would ask the dealer if they replaced the van phasers and the secondary chains/ tensioners. If you just go in and replace the main chain it can possible happen again.
Any update on this?
Ford I miss the old style engines
132turista demexico the old style that were workout at 90k? And had less power than today's engine's
Jondavid Bristow so I guess my old 302 in my explorer with 257,000 miles is "worn out" not hardly there jabronie!
@@jondavidbristow9819 there is a reason fox body's are as popular as they are.
chad harmon your 302 didn’t boast over 100 horse power per liter.
At 41:57 the seal that you slide on. In Part 4 you show the same seal and you're putting it in the timing cover plate. I think you have to put this seal in the cover and slide the seal on with the cover plate. That's what I had to do.
This engine is pretty clean and well maintained, why it has stretched timing chain ! look at the cam loops, no single scratch.
Even those Chevy V6 engines.
Brian must do these jobs in his sleep now! Great job at explanation!!
Hey Brian. Are the cam phasers a necessary replacement when doing this job? Thanks.
What is the book time for this repair? I usually don't work on smaller trucks like these but I have a client who wants it done. How many hours does it take you?
You saved my ass today.... Thanks Bro!
This video is very professional EXCELLENT !
Outstanding!! Great info for us DYI Mechs. Thanks!
Very well made video Thank you !! As for timing cover sealant, I have used Dirko bond (German sealant) b4 on Porsche, Audi, BMW, ect. Seems to work fine and have no issues
Great video thank you do you have Crankshaft Front Oil Seal Installer information?
Great video!!!! Very helpful. I was wondering where to get a complete oem timing chain kit(camphasers, water pump, chain, guides,etc.)? Or product that is equivalent. Thank you
I have a 2015 Lincoln Navigator 3.5 ecoboost.
Will the listed parts apply to my engine too? Thanks a million! I’ve been watching your videos for years! You helped me with my 2005 F150 5.4 3v!!!
Camera work is nice
If you are rebuilding the timing chain on this engine, I highly recommend to change the water pump, because if that crap fail ( which is often) you can go back and take the whole engine apart and if lucky, you might be able to save it
hey i'm about to tackle this job. are we not upgrading the oil pump at this time. 2013 f150 3.5 eco boost
I love your videos! I am preparing to tear apart a 2017 Ford mustang 5.0 and I was wondering if you have any links or help with a guide on the proper timing procedure?
Would you happen to recall what oil that was running and mileage on motor? Looks pretty good inside.. Thanks.
How much does this job cost. I need my 3.5 done I'm just worried about it not getting done and cleaned up right. Were the mechanic trying to skip doing something because they're lazy and then charging me for it I've actually had that done to me before.
I want to go back to the engine they had in the 60s anybody could work on it you needed a bare minimum in tools and they would run forever! All this plastic engine parts and exotic parts and specialty tools!
Is it worthwhile to pull the condenser and radiator so you can sit on a stool facing the motor to do all the timing chaing work? You're 2 hours into this and my back is aching just watching it! and you know exactly what you're doing!!
Can you please give us the part number and where to buy the front crankcase seal driver tool?
Seems like a very good time to clean the intake valves and install a catch can. My truck just started making this noise. It isn't terrible yet. Any guess how long before it becomes a serious problem?
By the time I watch part 4. I will be able to do this. Anyone have a 3.5 that needs a new timing chain??? Thanks man great video.
At least the phasors are pinned to the cams. Better than the 4.0L S-O-H-C. Probably, the reason there isn't much in the Aftermarket area is that this engine is strained to near its mechanical and strength limit. Just a thought.
Can you tell me if there is a complete kit that includes timing chain and phasers seal etc ... or do I have to purchase separately .... Awesome video .. Thank you
Do you have a link to purchase that tool to replace the crankshaft seal?? I will be fixing my ecoboost soon and that is the only tool I don’t have
There goes my ecoobost!!! i really miss my 5.0.......
Great video, wonder why these fail though. The chain looks pretty robust. Specially compared to earlier 3.5s.
Yuo one best very help i fix my own truck thanks to yuo .
Haven't had to do one yet. I think it would be just a simple to remove the engine? Or lift the body? Thank for the videos!
Great video series. I have a 2011 F150 with an intermittent start up noise on my 3.5. I was quoted $1,800 to $2,200 to complete this job. Does this sound reasonable? It’s a big job, A service advisor said Ford allows 10 to 12 hours of labor to complete it.
Those prices are dirt cheap.
Nathan Johnston I had the same chain rattle I added small can of wynns engine tune up for lifters and stuck rings my reasoning was that the tensioners might be sticking or the oil lines to the tensioner was clogging any way I ran it for 15 min in park let it sit overnight started the next day ran for 15 min , started it again let it sit for a few days restarted ran in park 15 -20 min No noise . Changed oil and filter added 6 oz of motor kote and 5-30 synthetic oil and new premium oil filter no noise since , I am working on the truck and won’t get on the road till spring as I just welded in cab corners rockers with my welder and prepped primed and covered with bed liner but the weather here in Ontario Canada has turned to cold to do much else outside and I need to get front vac hubs ,differential clutches ,brakes ,touch up paint and get 2 new tires then safety check at local shop
@fordtechmakuloco
I just had my 2012 3.5 done.. all vcts, phasers, guides chains were you replaced. after a short drive home 30 miles from the shop it jumped timing..we dont see clear conclusive evidence that is hit a rod but we do see tiny mark that it may have hit a rod on the piston but my question to you is why did it jump timing, did one of the new components fail?
Thank you for the video. I have a bad water pump on a 2012 MKT its been 5 months nobody wants to work on it. not even the dealer they offered me a new engine for $9k instead...I'm at the point where I want to fix it myself. but the engine locked up when water pump went out because it was running on highway when it happened. can i still change it the water pump even though the engine locked up or was any other critical damage?... Thank you in advance for any experienced input.
Good day Sr, I got a question for you I have a 2013 Ford 150 3.5 ecoobost with bad engine I’m home I have and 2009 ford edge for a customer….. never come back long story .. the edge have on it a 3.5 engine that’s same engine ?
Replacing the water pump. I am trying to align my camshaft pulleys and crankshaft sprocket to the proper position. My left camshaft pulley is close to being in the correct position, my right is way off. Now I can't turn the crankshaft any further. I am in a bind because now I feel like I have completely messed up my engine timing and the crankshaft bolt won't turn anymore, and I am afraid to force it in fear of breaking the bolt. Do you have any guidance on how to remedy this.
What is the torque sequence and spec on the primary chain sprocket and plate?
I feel like taking you my truck for this
ok i know this is an old video but please i need help, my timing chain slipped and i have no idea where i should line the crank timing mark and the cam timing marks before i install a new chain, Does it matter as long as the chain marks line up with the gear marks?
What a freaking mess Brian 😲
GREETINGS! AND THANKS FOR THE VIDEOS. IS THIS PROCEDURE THE SAME FOR 3.7L f-150 year 2012?
So ford recommends a
Metal prep wipe before silicones applied? Guess I’ll head to ford
Do you have a part number for the timing chain guides and the secondary/primary chain that the link are still working. Much appreciated
Question i hope can be answered. On my crank sproket, it only lines up at the 2 o'clock postion when my phasers are lined up like the video. I've turned it over several times, but when phraser dots are like the video the crank sproket dot is 2 o'clock postion. Any thoughts
I think toyotas sealant, FIPG, Is one of the best sealants ive used. You should check it out if you havent heard of it. i use the black one
Do the phaser chains need replacing too?
I don’t
Well I have 320k miles all original miles. Water pump failed so I decided to dive behind it and do this job too. I currently waiting on additional parts. Phaser chains had worn the tensioners, crank pulley had a slight grove from the seal. I replaced the oil pump with a melling while I was right there. Crank sprocket showed wear as well. Timing chain guides looked ok but cheap enough to replace. A few other various wear parts I thought would be smart to replace as well. Thanks for a well made video. Some how I had it 180 degrees out when I pulled it all off. Had to move the crank to clearance position and set the cams. Oops.
Btw mineral spirits melts that silicone gasket. Soaked it and plastic brush took it right off
Forgive me if I missed it, but you stated the HPFP bolts are torque to yield. I don't seem them in the list of parts to get.
I have the duratech 3.5 Taurus. I am taking the right-side phasers off in order to replace that upper chain guide. This secondary tensioner pushes down fairly easily. I noticed, just while checking things out that the left side secondary tensioner won't push down at all🤔. Does this mean that tensioner is shot? I wasn't planning to do anything to that side.
You have got a lot of patience
wow after working on a number of 5.4L engines this looks like a nightmare
I know this is an old video, but hopefully you will reply. Why didn't you replace the 2 small upper chains that go on the phasers? Wouldn't they age the same as the main chain?
What kind of grease were you referring to when adding back in the seal and also on the ignition tube seals?
I use trans gel
Well, now I love more my 5.4 2v.
Does the 3.3 L time in the same manner?
Questions the sprocket need move together with the can because when I move the sprocket the can take little to move thanks hope u can help with that 😉
Did I miss it, or is there not a link to the cookie wheel for cleaning the gasket surface? I have also looked on Amazon, but so far not finding any like yours yet. Also, thanks for the videos.
Thank you so much for doing these videos you've literally saved me a ton of money! I love how detailed and precise you are on your break downs. The extra side tips are awesome too. Hands down your videos are a God send. I only have 1 question, I'm in the process of doing this exact same procedure on my 2011 Ford F150 ecoboost and I noticed after removing the phasers that the little nubs on the camshafts do not align 12 and 3 12 and 9 they are slightly off from that. Does this mean my camshafts are out of alignment and if so how do I correct this?
how did you end up correcting?
@@jacobstover1949 I bought a used motor lol, my repairs didn't work!
@@danlawrence6571 what part of the repair didn't work Dan?
amazing this stuff works at all
What I found out on the secondary chain tensioner, on the the left side of the engine, I seen that it wasn't pushing up on the chain, could you verify this process for replacing them. I took the one that I felt it was bad, I began to compress it about 3 times, and it released to full tension. My concern was I put both left and right tensioner new and once I pulled the plastic tab out they didn't spring up to full tension. I am hoping that I can remove the valve covers and plunge them down and get them to release to full tension. Was wondering if you have seen this problem?
Can i rub a little bit of engine oil on the valve cover spark plug rings instead of grease ?
How tight are the bolts? I am working on one and I'm worried about breaking the bolts or camshafts. Breaker bar and wrench on the camshaft but don't wanna budge
I have mine stuck as well! How did you crank it out ?
Great videos, I followed these to the t and installed new solenoids phasers and a complete timing set. I now am getting intermittent p0016 and p0017 codes. My actual versus desired on both exhaust cams is exactly 5° all the time and holds a very steady. Did I set the timing wrong?
Did you figure out what happened?
My truck at Ford Service now with a Rear and Front seal leak. Only have 68k miles on it. Luckly I still have a warranty on it.
Your the best. God is really using you with your amazing gift of teaching. Jesus Loves you, and I pray for blessings over your business in Jesus's name.
Thats some tedious work, people like him deserve every penny for that job, paying for what they know, instead of Bubba with the chain hanging from the tree
Is now a good time to replace the thermostat? Is that a part thats prone to fail?
Why were the colored links of the chain not on the timing marks when you had the cam tools in place?