Nutribullet DIY Fix - Don't Throw It Away
Vložit
- čas přidán 4. 09. 2024
- Hello and welcome back to The Handy Outdoorsman!
Today I’m tackling a high priority task, high priority because it was handed down from “The Mrs.“ Lol.
She uses a Nutribullet daily and lately it has become difficult to operate in that one of the 3 activator tabs in the base gets stuck to the point where the blade and cup won’t fit into it properly and that prevents effective chopping/pureeing/liquifying of the ingredients.
It’s under warranty and I spoke with a Nutribullet Rep who was aware of this type of problem and gave me a solution that should fix it but didn’t seem very thorough. I decided to try my hand and go a little further. Do note that your warranty will be voided if you attempt any DIY.
But follow along with me (especially if you don’t have a warranty) and you may save yourself a few dollars. It’s a simple yet little-known fix and more importantly, “The Mrs.” is happy.
Thanks for watching.
Until the next video, take care & God Bless.
The Handy Outdoorsman
“The most simple things can bring the most happiness.” ~Izabella Scorupco
Thank you very much. Easy to follow video. I repaired my Nutribullet following your video. One of the 5 Rs - Reduce Reuse Recycle REPAIR Refuse. Congratulations! You have successfully saved a landfill. 😊
I agree let's keep stuff out of the landfill, it's planet earth our home after all.
Very thorough. I think most people without a warranty just toss them out when they stop working. This should be helpful.💕
Thank you for the tutorial…. I followed your directions and my nutribullet is working again, beautifully. Thank you thank you. Took me two days…part one I disassembled it. Part two put it back together. It was worth it to not see it on the trash heap! I’ve gone that route before. Wow!
Happy to hear the video was helpful. Thank you for watching and commenting!
Greetings from Romania. You’ve just saved me +100€. I was prepared to ditch it and buy another blender, but then I found your video and fixed my Nutribullet with a screwdriver and a 10 minutes job!
Thank you!
Awesome 👌 Glad the video was helpful, thanks for watching and commenting
@@thehandyoutdoorsman9014 do you still have this nutribullet? I'd love to see a video of the actual motor and i dunno the terms here gear box? opened up and lubricated to extend the life of the blender
You, sir, are a lifesaver! What a great, informative How-To video! Your detailed instructions worked like a charm. I'm back up and running. Many, many thanks! Bob
Your welcome Bob.👍 Glad the video was helpful.
Thank you - just taken mine to bits and cleaned it out and put it back together again and hey presto!!! all good again, and i've had mine for years :)
Awesome
Thanks so much, I followed your instructions and my Nutribullet now works! I knew I shouldn't have listened to my husband who told me to throw it out! Also, hot water with a dropper? What a ridiculous suggestion from Nutribullet!
Glad the video was helpful. Congratulations on a working working Nutribullet!
This so incredibly helpful! 3 years of bliss and our machine decided to give up the ghost. Certainly worth spending the time doing this than spending the money to send for repairs or potentially a replacement altogether. Thank you 🙌🏻
"Gave up the ghost" that's hilarious 😂 Glad it was helpful and thanks for watching!!
A video I never thought I’d NEED! But HOWWW did it come in handy! Thank you for taking the time. Your clear steps saved me time AND money...we’re keeping it!
Glad it was helpful!! Yea sometimes I think CZcams took me down a rabbit trail I will never need, then one day I realize I saw a video on that once. Thanks for watching and commenting.
Thank you. That was a huge help when it came to dismantling so that I could clean up the commutator and brushes.
This is a godsend!! Thank you, sir! My mom was devastated when her nutribullet was no longer working. Im not the tinkering-type, and I never would’ve figured this out on my own. Many thanks!!
You are welcome. Thanks for watching and commenting!!
helpfull video .when opened mine up the problem was with false base plate was broken at both lugs ,pieces being attached to the screws .also one lug on the one true switch was broken ,replaced with longer screws and had to repair the false base plate with super glue .works fine now .
Wow that was a lot of repairs. Happy to hear the video was helpful. Thanks for watching and commenting!
I pulled mine out of the trash and repaired it. Thank you for your video!
That's great - glad the video was helpful! Thanks for watching and commenting.
Thank you!!!!! Was ready to throw it away, but thought I'd CZcams it first. You just saved me some $$$. Thanks again! :)
You sir, are AMAZING!! Girl power followed your corrections and added a little WD40. Good as new!! Bless you..
Yep WD40 would works as well. Glad the video was helpful!
Thanks! Mine stopped working tonight. Was going to pitch it and buy something else. Now, I'm going to follow your video step by step.
Good luck!
Thank you for posting this! Our Nutribullet stopped working and was ready to buy a new one - didn't even occur to me to look at those levers. FYI - Didn't even have to pour the water to solve the problem - I started by taking a small knife with a sharp edge and carefully cleaned out dried food/buildup from each of the edges of each lever. Took about 10 minutes max. WORKS PERFECTLY now! In my case it was an easy hack but wouldn't have thought of it without your video.
Amazing totorial ... my problem was slightly different ... it still allowed me to reach your level ... without you i am not sure i would have made it.
CRISTAL CLEAR !
And actually, doing what you did would probably have made my nutribullet much softer ... it was always a battle to light it on !!
now it is smooth and soft.
thanks a lot ... and my wife says probably thanks too 🙂
AWESOME! Thanks for watching and commenting.
Thanks for the video. Mine wasn’t due to the stickiness but following along to this, I did discover one of the screws holding on the brackets for the press down pieces had cracked out of the plastic so it wasn’t pressed flush enough for the white rod thing to press the latch to turn it on. I got a longer screw and drilled it into the plastic a little further and now it works! Hope it holds for a while.
AWESOME! Thinking outside the box, love it. Happy to hear the video was helpful.
Thank you so much for this video. I wasn't brave enough to look inside prior to watching your content as I have no idea about how electric things work. You showed it in such detail and made it look easy so I gave it a go. Looking inside I found a cable that was cut probably by the propeller. I watched another video on how to reattach wires, reattached it, put everything back together and voila my Nutribullet works again. I'm so pumped about this. Not just that it works but also because of the satisfaction of fixing something yourself. So thanks again!
Nothing more satisfying then fixing something yourself. Happy to hear the video was helpful !! Congrats on taking it one step further and fixing the cable. Thanks for watching.
Excellent video and explanation. I used a small handheld steamer to loosen and remove the food residue on the unit( careful to avoid electrical parts). Then I wiped it thoroughly with a cloth and let it dry.
That was a great idea!
@@thehandyoutdoorsman9014 I literally just did it yesterday. I had made a mess by accident, but it worked out! 🤣
Thanks for the detailed video mate. The plastic assembly that holds the spring of that strip which is supposed to click - one of the 'legs' had snapped on my 13 month old nutribullet (just one month out of warranty). So ended up connecting the red wires bypassing the switch - there was at least one activator making/breaking the connection. So it works now no worries.
a little ingenuity there, I like it. Glad the video was helpful.
The plastic "legs" on one of my switches broke too (where the switch screws in to the assembly). Clearly the plasic used is not strong enough to handle that torque. I didn't try your workaround yet, but if what I did doesn't hold, I will. Thanks to both of you.
Referred to your video again as today, the blender stopped working yet again. Found that the one activator that was making/breaking the connection had its legs snapped too. So ended up disconnecting the wires from the circuit breaker and joined them together, so its a direct connection. The only downside is, the blender will turn on/off at the wall now instead of the jars weight.
@@happybuddha13 thank you for this suggestion. One of my "legs" broke off, too. I gorilla glued it back on. hope that will do the trick.
Thank you! As a fellow member of the #DIYAssociation this video gives me leverage with my lady. Showing this her now!
Happy to hear the video will score you a few brownie points with your lady! Going to borrow your phrase "As a fellow member of the #DIYAssociation"
@@thehandyoutdoorsman9014 don't just borrow - own it! No membership dues needed. I'll be sure to update you on my clean-up. Confirmed it works still but it feels unsafe knowing there might be liquid on the inside.
Thank you so much for this detailed fix video. I fixed mine bc of you (threw my previous Nutri-Bullet away)!
Feels so good to be able to fix it myself and save $100.00 !
your welcome. Glad the video was helpful.
Thank you, I was going to throw my nutribullet away. God bless you.
Your welcome!
Worked a treat and saved me some £££. Only took about 15mins to do. Try this before buying a new one. Thank you very much! 👍 😁
I bought mine many years ago and never used it.
Now I am ready to use it and it is not working.
I watched your video and I found out the problem.
Thanks a million
Your welcome. Thanks for watching and commenting!
I took mine apart and found a broken bracket on one of the safety switches. I MacGyvered a fix by drilling through, adding a new screw, and using my Dremel tool to cut off the excess. It worked like a dream! Thanks for the helpful video.
" MacGyvered a fix" - how awesome! Thanks for watching and commenting.
If you overfill the cup, it will leak
Thank you man! In my case, one of the little plastic pieces that held the tabs/spring/switches to the body was loose because a piece of the body itself broke. Thanks to your video, I opened it, cleaned the devilish gunk that definitely forced the failure, and reseat the switch in the bit where the dummy tab was. Made the spring shorter on the dummy tab to release tension since now it's held by just one screw. Soldered a bit of extra cable between the switches ( the live one), greased everything, put it back, and saved $100. And the missus is proud of me. Nice friday afternoon project.
Happy wife - happy life ! Sounds like you had a different issue and was able to correct it once everything was apart. Congratulations on fixing your unit. Thanks for watching and commenting!
My wife was ready to throw it out. Thanks to your Video, I cleaned it up very good. I liked your video over others because you actually showed EVERYTHING(taking off all screw and putting them back).
Thank you.
Happy wife - happy life!! Thanks for the view and comment.
Thank you so much for this really easy to follow video. It saved me buying a new blender for £70. And I'm not the best at diy either😊
Happy to hear the video was helpful 😀. Thanks for watching and commenting.
I just followed your video and now my Nutribullet is humming. Thanks so much!
Awesome! Thanks for watching and commenting,
Thank you for the upload ..followed the steps ...and voila its working again
Happy to hear your back in action! Thanks for watching and commenting.
God bless you too brother
It worked! We had the same problem. I was getting ready to throw it in the trash and decided to take it apart and try to fix it myself. It wasn’t until I was almost ready to put it back together that I found your video. I took apart what I had already put together and cleaned those plastic strips and cleaned all the crud out and then put it back together. It works great! Thanks!
Happy to hear the video was helpful. Thanks for watching!!
Thank you for this demonstration. I really appreciate all your time. But honestly, I have just decided to remember that before I use my Neutra bullet from now on, I will soak just the lip with those three little knobs that should push in, in hot water, and just about a half inch of water and I’ll be good to go. Thank you again, but I hate taking things apart.
Thanks so much! I guess this is another problem because it still doesn't work, but the video helped me a lot. thank you so much.
Raul - your welcome - good luck in your troubleshooting.
Laid it on the side and pour hot water on mine and it did the trick. Thanks for going that extra mile.
Perhaps this would be the fix for others as well. Thanks for sharing!!
Appreciate this. I have 2 "broken" ones. I just love the form factor, ease of cleanup, and take-apart everyday use of this blender. But no more $$. I bought it twice.
Great fix! Now I can have my own smoothies!!!
How awesome is that!! Thanks for watching
Thank you so much 🙏🏼 Mine is now fixed because of your video. You have saved me ££’s. I no longer need to buy a new one 🙌🏼
Nic 🇬🇧
Happy to hear the video was helpful! Thanks for watching!
Now let's talk about the little plastic activator tabs on the cups that if broken won't activate the machine.
Excellent Video! I had given up fixing my wife's NutriBullet as I could not get it apart. The 3 screws under the silicon stoppers were all covered by gunk so I couldn't see them. Lots of gunk inside. Once I gave it a thorough cleaning I discovered one of the switches had a broken plastic threaded part below the switch. The switch would flex under pressure and wouldn't make contact. A little dot of epoxy and all is well. My wife is happy, so I am too. Thanks for your info.
Happy wife, happy life! Glad the video was helpful.
Thank you so much for this video! My Nutribullet started smelling, I opened it up using your instructions and found some dog hair on the motor (shouldn't be surprised). Then I put it all together and it works!
How awesome is that!! Glad the video was helpful.
Thank you so much for this video sir. Very detailed and thorough. Got my nutribullet working ok again 👍 👍 👍
You are welcome. Glad the video was of some help!!
Brilliant! The eye dropper/hot water trick worked like a charm
Awesome 👌
This is the second time it happened to mine, wish I had googled or CZcamsd it, great fix took me 20mins, thank you.
Happy to hear the video was helpful. Thands for watching and commenting!
Thanks much for this video. Before disassembling I applied a half eyedropper of boiling water to the two white 'trigger tabs' that were stuck and after a bit of pressure from a screwdriver was able to free up both of them. Followed that up with a drop of lubricant in each. We'll see how long it lasts.
My video is for those that have given up on the hot water treatment. Good luck, hope it works for you!
@@thehandyoutdoorsman9014 I wouldn't have known about the hot water fix without your video so thanks again!
Thank you i was about to throw it away until i saw your video.
Very clear demonstration of all steps. Thank you. Great job.
Your welcome! Thanks for watching and commenting.
I took mine apart because of your video and it WORKS. you did GOOD!
Awesome, happy to hear the video was helpful!
Fantastic video! Was just about to throw the nutibulit in the bin. Followed your video & now it works!!! Can’t believe I fixed it! So happy, thank you!
That's awesome! Happy to hear the video was helpful.
Thanks for making this video. Easy to follow and incredibly useful! Cheers! My mum's NutriBullet is now working again so thank you - much appreciated.
I am sure your mum is happy you took the time to fix it!! Thanks for watching!
Ahh! This is so satisfying, (like popping a zit---ewww!). I have an older Nutribullet (at least 10 years old?) I have been able to keep it working b/c I could always free up the sticky motor triggers, but because the inner liner of the base is see-through, I could also watch as all sorts of guck worked its way down and behind...and then grew moldy and grosser and grosser....with absolutely no way to take it apart and clean it, rrrgh! The moldy gunk cannot get near the food you are preparing, but I hated that it was so gross to look at and uncleanable.
I have to say, I love the power of this blender, but it has a hundred and one nooks and crannies that are stupidly hard to clean. The seal around the blades has to be taken out to clean or it gets horrid and smells awful, but to get it out, you need to use a pointy knife tip which inevitably nicks the rubber. If you have never pulled that ring out, be scared! And surely that sludge intermingles with the food contents, if only a teeny bit.
I do a lot of toothpick cleaning of the machine which is obnoxious.
For ten years I have wanted to take the motor base apart and "have-at-it", but couldn't figure out how to disassemble the unit. In fact, even following this tutorial, I had my doubts it came apart the same way (because there are a few parts that have changed slightly from the ones you see in this video)....Trying to get the inner cylinder off was almost impossible....I would never have known it WAS possible! I pried with a screwdriver and finally with the machine upside down on the floor and grasping the silver ring with the edges of my feet and pulling, pulling, PULLING it finally cracked free. I think it was glued on by years of hidden gunk!
What amazing gratification! All the inner parts except the motor were covered in gunk. What an awful design. I'm over the moon knowing I can get this apart to clean when I want to now!!! One word of warning to others with an older model: Those 3 white plastic trigger pieces are extremely fragile. There is a little factory seam that broke just washing it gently under running water with fingertips. Then the next one broke even though I was watching out this time. I am currently trying to superglue them, on a piece of parchment paper with an eraser on top to hold it flat while the glue sets---yikes. The design of these triggers now looks much sturdier and improved in your video.
On a side note, I also find the food container nearly impossible to unscrew after blending. The threads, though very clean, have grown gritty. I have to wear rubber gloves and brace the cup against my inner knee to unscrew. The container always leaks a bit, even though it is so tight you cannot open it! (So I put a towel over my knee....I have dedicated rubber gloves and towel for all this rigamarole!)
Anyway, you are my hero, and I feel like a hero getting this thing apart! Hopefully these triggers will glue up okay so I can put it back together again :)
Thank you! I just finished fixing my Nutribullet. Very thorough and so helpful. It works just fine now. :(
Glad it helped!
Thank you very much sir for the the detail and well given explanation.you are a life saver.😊
Happy to hear the video was of use for you! Thanks for watching and commenting.
Thanks a million, you helped me fixing a road block in my life!
Your welcome. Happy to hear the video was helpful!!
thank you sir!
we've had our nutribullet since 2014 and im surprised it never stopped working haha
finally decided to disassemble it and omg it was so NASTY
Glad the video was helpful. That's a good run on not having issues. Should last you a long time with occasional cleanings. Thanks for watching and commenting.
Hey 😁 you work as fast as the million dollars man 😉
The best way to fix the nutribulit.
Worked like a charm. Thanks!
How awesome is that! Thanks for watching.
Very helpful instructions. I fixed mine today and work just like new. Thank you
Awesome!
Yes, I agree with the others, about halfway through the video you have clearly voided the warranty. I’m curious how long it would take to ship this to the manufacture and have them repair it. They would probably just send you a new one
Thank you. Very helpful
Much appreciate this step-by-step instructional video it did help me clean mine as I watched, awesome. Q: That caution blue plastic inside the motor base, other than it being a cautionary or a warning usage on it, do you know if the plastic itself serves any other purpose than that? mine is peeling and I am debating weather or not to remove it. Again, appreciating your time in sharing your knowledge and help, as well as, any reply to the question. Great season to you and your loved ones.
If I recall I believe it is just there for warning purposes. You could wrap some clear tape around it if it is in the way.
A very big thankyou to you sir , you saved me a lot of trouble ,
Glad the video was helpful
Great video. Do you know where I could buy replacement parts? One of the grey plastic mounts for the activator has snapped so the slide switch no longer pushes the activator. So I need to find a new plastic mount.
Unfortunately I do not. May I suggest a thrift store or a good will store.
Thank you so much. Just fixed mine after watching your video.
Your welcome!! Happy to hear your back in business.
What's the name of the product that you're using to replace the Nutri Bullet as well Please?
Great help to fix the activators
Happy to hear it was helpful! Thanks for watching and commenting.
Thank you very much, you're a great help.
Just did this was about to throw mine away this was 100% helpful thanks 🙏🏾 again 👍🏾👍🏾👍🏾👍🏾
Happy to hear it was helpful. Thanks for watching and commenting!!
I used silicone grease to lube springs and plastic parts. wont effect or hurt palstic. Plumbing silicone is fine they sell small tubes of it.
Sometimes lithium grease can degrade plastic over time.
thanks I have the same problem, great video
Hope the video was helpful. Thanks for watching!
What if it's smoking?! Because mine began to smoke, so I might think I'm gonna buy a new one😯🤷🏿♂️
If it is smoking replace it. Smoke is an indication there is something wrong with the motor. Pretty sure that can’t be fixed.
So, I was all excited to fix my Nutribullet, took it apart, and cleaned up all the gunk. Got it all put back together and now it has no power at all. Any ideas of what I could have done wrong? It had power before, it just didn't spin...now, nothing.
Thank you, you’re so helpful and clear instructions.👏👏👏
Your welcome.
Thanks for sharing this with us..
I have a problem with mine too.., but in my case the motor makes a terrible sound recently.. any idea ???
Have you taken it apart to see if any foreign matter leaked into it? Other wise I have no idea what it may be. Good Luck!
Just fixed mine. A switch stopped clicking. I guess a piece of something got in the way. Took it apart and pressed on the little metal piece a couple times and it started making that clicking sound again. Voila, fixed!!
Awesome!
Hello, thanks for the video. The activator tabs on my nutribullet do still go up & down freely, however, it won't turn on, unless I push it down. If I push the cup down, it works, but as soon as I let the cup go, it will stop. Any thoughts on what could be wrong with it? Kind regards & Thanks for your time.
Perhaps I am not understanding your question. The machine is not suppose to come on unless you are pressing down on the cup, that is how it is suppose to works.
@@thehandyoutdoorsman9014 To clarify, usually I can put the nutribullet cup on, and it will turn on (at which point I don't need to be pushing the cup down). Then when I am satisfied with the blending time, I twist it off to stop it. But recently, I put it on, it starts, but then stops the moment I let go of the cup. So now I need to push down on the cup & hold it down til it is finished blending.
@@RememberToLove Did you take the unit apart and clean it? If not then there might be a buildup on the activators that is causing it not to stay engaged.
Got mine working again... thanksbsir
You are welcome!!
Thanks! That worked!
Awesome, glad the video was helpful. Thanks for watching.
thank you good job !
Glad it helped!
Thanks 😊👍👍👍👍
Help!.... this morning i heard a terrible grinding when using my bullet. Been looking for video to help, you seem to be the one to ask. I immediately stopped and there where pieces of medal. One piece looked like half a ring. Looking and looking, it seemed to come from the little, "whole", that's on one side. I dont know how this could have happened. I call myself talking good care of it. Keeping it clean etc. I'm afraid to use it since i don't see this can be replaced. Might you be able to tell me something?
Sorry I do not have any suggestions.
Great step by step video! Question: Do you know if the Nutra Bullet RX is built the same way! I sure hope so , because I made a BIG BOO BOO while making a hot dipping sauce. It had been awhile since I had used it...I forgot that I am supposed to use the vented lid when making hot stuff in it. Well, as you probably guessed, pressure built up and exited straight down and through the base! I turned it off immediately and cleaned what I could, but I know its gonna be a mess inside. I'm 2 months past extended warranty, of course. HA! I don't want to run it til I know its cleaned out...don't want to put any stress on the motor.
I'll check back for your answer. THANK YOU!🤗
I am not sure if they are the same. My guess is they are, but have different size motors. Personally I would take it apart in the same manner I took mine apart. You have nothing to loose. As you said you really don’t wNt to run the motor if there is foreign matter all over it. Good luck! 👍
Thank you, you were great 👍 👌
Your welcome! Thanks for watching and commenting.
Thank you so much 🙏🏾
Your welcome
Thanks for the great video. Its too bad that Nutribullet designed something to essentially fail every 6 months.
I would agree, adding the proper seals might prevent things like this. But then again, they don't make money unless they are selling units. Thanks for watching!
Agree 100% Some features are clever, but the materials they used are designed to break. Metal screws going into plastic... will fail in no time
Has your wife had a problem with sealant ring popping out? I can't get mine to stay inside the extractor ring. I just bought the darn thing too! Isn't that just the beast?!?!
At this time this has not happened to her.
I have another question to ask you please how do I fix the top motor property for the NutriBullet 900 series as well?
Properly
This is super. My only problem is the blender is full of smoothie! I will proceed cautiously...
Happy to hear the video was helpful!! Good luck.
Great video. Very helpful. However, I can’t separate the decorative housing. I think smoothie mixture got stuck there. Suggestions? Krys
This might be where using a bit of warm water to dissolve the residue will come in handy. Since your applying it between the two casings it wont be directly on the motor. Good Luck!
Thank you for this. I took apart my NB to clean and needed to assemble it back. Are you able to tell me, when you screw the plastic tabs onto the spring (start at 12:15) do you leave some room so you can jiggle the tabs (and feel the spring) or tight all the way?
I put them on loosely at first so everything lined up and then once aligned tightened firmly
Great video but honestly I don't see myself doing this. I've had about 3 NutriBullets and tossed each one. I probably won't buy another one. I didn't use them all that frequently and it just seems like there should be a better design or something. My smoothies did seem to leak a lot. Maybe user error lol. Think I'll try a Ninja next
Its not that difficult - even if you followed Nutribullit's suggestion of placing a couple of teaspoons of hot water down each side you would be back in action with little effort.
@@thehandyoutdoorsman9014 I meant to come back and edit my comment. I actually did NOT throw away my last NutriiBullet as I had thought and decided to try and fix it. You're right, it wasn't that hard and it has been working like a champ ever since! Thank you!
The plastic housing that holds the spring is broken on mine. It’s load bearing so will it hold if I superglue? Probably needs more thorough repair
Do u find a solution? Ive same thing
Do u find a solution? I've same thing
@@amanyalghamdi7018 it needs to be drilled through and bolt put through to hold it. Glueing won’t hold it due to downward pressure
Thank you so much for this video. You should add a $ donation button to your video(s) . You have helped so many of us that we would gladly chip in small amounts to repay you for your service. And to keep more videos like this coming .. Thanks again and good luck!
Will have to look into how to add the donation button. Thanks for watching!
Just the video I needed. This is my second Nutribullet and I've had really good experience using this monster. Now it's kaput! :-( Bugged down after a year of usage and I was thinking of throwing away mine because the activators (the 3 white plastics you took out) have been totally chipped and there was no way I could turn it on. I felt it was a waste of money for only a year of use. After viewing this video, it gave me hope. I can fix it but my question for anyone who has the slightest idea is where can I buy spare activators? I am desperate at this point. Can anyone give me more hope? Super thanks!!!
Have you tried reaching out to Nutribullet to see if you can purchase them? If not see if you can find one on eBay for parts. Glad the video was inspiring for you to try and fix it yourself. Thanks for watching!!
@@thehandyoutdoorsman9014 I got my Nutribullet from. Australia but I live in Malaysia and unfortunately thryndint have an office here. Tried checking out eBay but there was none...perhaps they may have been using a different name for the parts? I'll try to email them instead. Thanks for that quick reply.