Motor breakdown Ep.02
Vložit
- čas přidán 30. 09. 2023
- The full process of removing the copper from the motor sector. One more tool was added to the mix. As you will see towards the end I had a few coils that did not want to release. So I used a 1/2x6 flat head punch and the 3/16x5 in punch to get it out of the motor the rest of the way.
Tools:
1/2x6 flat head punch
3/16x5 hole punch
Hammer
Flat head screw driver
#scrap #scrapmechanic #copper #copperbars #motor #makeyourmoney