Mk7 GTI Air Inlet Scoop - OEM+ Intake Set Up
Vložit
- čas přidán 20. 10. 2020
- Check out the air intake ducts here: bit.ly/3YTv32l
DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
Without going full aftermarket on the Mk7 GTI intake, we added the bigger turbo elbow, ECS silicon hose, K&N drop in filter and removed the snow guard. Now, we've cut out the driver's side air ducting and added the ECS air inlet scoop. It's a cool and subtle mod that should help to increase the air flow to our turbo and make the overall system more efficient.
Thank you all for watching! Please be sure to subscribe for more and drop those comments and leave a like!
SUBSCRIBE - bit.ly/2IHFZcj
WATCH MORE NC MIATA CONTENT - • Restoring and Refinish...
FOLLOW COLORED IN LIGHT:
INSTAGRAM / coloredinlight
FACEBOOK / coloredinlight
Watch More Colored in Light:
Vlogs: • Custom RPF1 Center Cap...
Car Meets and Events: • Driving with some FAST...
NC Miata 101: • NC Miata 101 | How to ...
ABOUT COLORED IN LIGHT
Jackson Ralston, or known here as Colored in Light, is a video creator and car enthusiast based in Texas. On this channel, we take a deep dive into all things Miatas, cars and life in the pursuit of all things automotive! From how-to videos, vlogs and product features and reviews, Colored in Light is the place for car enthusiasts.
-----------------------------------VIDEO CREATION GEAR-------------------------------------
CAMERAS
DSLR Camera (Sony A7) - amzn.to/2qU95BU
GoPro Session - amzn.to/2sBBcWV
GoPro Hero 3+ Black - amzn.to/2EnfKHZ
CAMERA MOUNTS
Suction Mount - amzn.to/2LYIgUI
Joby GorillaPod 3K Kit - amzn.to/2YTEkcZ
GoPro Accessories - amzn.to/35uDd5X
CASES and PACKS
Cheap GoPro Travel Case - amzn.to/2PpIx55
LENSES
Sony 50mm FE - amzn.to/2M0Vdx8
Sony 28-70mm FE - amzn.to/35oJNLg
AUDIO
Rode VideoMicro - amzn.to/2PPRDai
Rode VideoMic - amzn.to/2PSq8wH
Sony VO Recorder - amzn.to/36I4t1e
THE MOD LIST
All Products and Links - docs.google.com/document/d/1j... - Auta a dopravní prostředky
keep up this series! I really enjoy it! :)
Same for all MQB platform cars. There is also a plastic part you can buy to block the hole on your passenger side so the air being scoop goes to the intake instead of the engine bay and removing the snow guard also helps.
Where can i fine this piece? Link ?
I found that you want to take that plastic block piece off in the summer it keeps the engine and the oil a little cooler UNLESS you do alot of city driving, then keep that thing on. My engine temps are like a full 20 degrees higher at idle or in start and stop traffic when I take that plastic piece off in the summer. But if youre moving most of the time keep it on. The car runs hotter than it tells you it does
Dam bro I just bought a mk7 and looking at your build it’s amazing little by little
That’s a pretty cool little mod. I’ve been looking at that air intake for a couple months and this is the best how-to take I’ve seen on this. Subbed an looking forward to following your mods. One thing I’m wrestling with is adding camber on the front, and looking for simple weight saving items for autocross. One of the smaller batteries is something I’m considering for race days.
One youtuber(forgot who) has a good theory on why there is the opening on the passenger side duct. He says it is kept open so that snow wouldn't build up and block the airway. Probably the best theory that makes the most sense. Openings in the grill and pretty much the radiator is sufficient to cool the engine, hence why they have the oem blockoff plate.
Forgetting last week, we don't normally get any snow in Texas, but the theory makes sense.
I think the block of plate is for keep water from entering direct to the airbox.
I checked out a new MK8 today. The opening on the passenger side of the air inlet is now a flapper. The driver's side of the air inlet is still closed off.
@@1iaris the flapper manual or controlled by electric?
love the intros!
Thanks!
I also have a NC Miata and a VW but a Passat. For the Passat I have a OBDeleven of course.
I picked up an obdeleven as well!
ECS is the only place I shop at about to get the APR stage 1+, I'm planning on a same build good for the everyday family man but fun for the driver in the back roads.
Good choice!
On my 7.5, it has matching factory slits on both the driver and passenger side if someone wants an OEM look. I still had to open up the intake duct as you did though. Maybe this was part of their improvements for the new 10hp more on facelift models?
Hi, thanks for this video very interesting, been thinking about opening up the drive’s side on my GTI, since I can’t find any open dual air intakes, wanted to ask if you felt any difference with the car after this mod, would you recommend it? I still have the stock airbox, bigger turbo elbow, larger intake pipe & a drop in filter.
I added this (along with the ECS Luft-Technik intake system). I used the provided template and mine stuck just fine; I lined up the holes and thought I was doing a good job but my install isn't right. It'll work but it's crooked. OP's install is nicer than mine. I suggest you skip the template and just eye-ball it.
Pregunta, como puedo conseguir esa entrada de aire.
Tight.
I cannot find it on ECS site!
u also couldve bought the dual inlet luft technik snorkel from ecs
i want to buy , can you give me link for oder ??
I removed the whole cowl now all the vents are open 👌
That works too haha
@Bryce Czirr agree
Need your help i have uk mazda mx5 mk3.5 1.8l ventura edtion it dosnt have cruise control but I'm thinking of buying another steering wheel with the buttons on it and installing it will this work.
You sure you have the right video?
Done the same intake mod except for the grill thing and the ECS inlet. Even then I got a lot more turbo sound (im on the GTD Though)
Is the inlet scoop any good with the GTD? Ive been debating to get it but don't know if it'll actuallt benefit it
@@joshwilkinson4177 opening up the intake will only give you more turbo sound on a diesel, that's why I've done it. No performance benefits.
If anything then maybe the turbo might spool quicker if you add a thinner filter like a pipercross but I didn't really notice.
For performance get a remap
Thought so, I've already taken out the snow filter below and cut the additional holes out the main feed, extra turbo sound is always a plus though
Dope video! What’s that cutout in the front grill? Is that for the license plates? What’s the product name?
Cutout in lower grill is for the front assist sensor
I got the set but, in black... Stealth Mode 😂
Nice!
I ordered this and it was inventory item , they delayed it twice already but they have the passenger side in stock , with it fit on the driver side. From my understanding it that the curve will be different and it wont sit flush , thats it or it wont fit at all ? Thanks
Won't fit on the side it's not meant to go on
Can I just cut open the vents and leave a open rectangle instead of installing the vent? Or would that be unsafe for the intake
I'm sure you could but would look a little sus
I have a open cold air intake not a stock box !
Would this help with more cold air into the intake or the opposite?
In theory, this product should divert more air to the intake. It's definitely debatable though
@@ColoredinLight thanks 🙏
Do you have to worry about water getting to ur turbo with this mod?
Doubtful, driven in the rain for multiple hours and everything is fine.
hi,
is it not possible that water gets into the suction while driving in the rain?
Doubtful
@@ColoredinLight really?
Yea
Or pressure washing the car
I just ordered this , my concern is would it let water in during heavy rain! Did that happen to u at all? I live in michigan
No
@@ColoredinLight what do u think about blocking the passenger side duct ? Isn’t there to throw air at the oil cooler located next to the oil filter ?
Lotta different opinions online which leads nowhere honestly 🤦♂️
My oil temps have been fine with it
@@ColoredinLight and it was worth it for the purpose u have it on after all ?
BTW are you thinking of tuning the ECU?
Definitely at some point!
@@ColoredinLight nice
This is kind-of cool I would do both sides just so they match
I did!
👌👌👍👍
Also possible for the 1.4 tsi? even though the intake is a bit different?
You taken snow guard out of intake under filter?
Yeah
Oh god, those sensors in the bumper are HIDEOUS!!!!
Omg I know right
@@ColoredinLight I'm in the market for a 2021 and was looking at the older ones in reference and my God VW....what were you thinking lol. Still a kickass car though!!!
link to the part?
I dont usually link to parts that I paid for myself. It's from ECS tuning.
@@ColoredinLight I couldn’t find it on their site.
The only thing you don’t have a link to is the actual product !
I dont like to link out to products that I pay for. Especially if I havent decided if I like it or not yet.
Colored in Light fair enough, it's just the type of thing I've been after
Mine is from ECS tuning and its call an Air Inlet Scoop!
Lol and I thought my dremel job was the worst out there. Makes me feel better I'm not the only one who was fine with just shredding the thing up. Who cares. Fuck that thing
It's not there if you can't see it
hi since 3y something go inside like a stone or something else?* wait a minute when u clean ur car its obvious the water gonna go inside easily right? 😂
There's still a filter any debris would have to pass through in the intake. Water wise, it would have to be a deluge to travel through the intake system and flood the filter so no worries there. It's all been fine.
@@ColoredinLight thx
All water 💦 will get inside of intek
Hmm doubtful
It was raining the last 2 days and drove the car around no problem
I agree. Would be curious to see how damp the filter gets after a drive home in the rain.
None damp
$160+ for both sides lol what a joke
🤑🤑 it's not that much lol