Video není dostupné.
Omlouváme se.
IH 1086 Hi-Low Trans Cover Reassembly with Creative Genius Technique, Keep Fuel Tank On
Vložit
- čas přidán 14. 02. 2019
- Trans cover going back on. Always needs a little persuasion going back on and a string comes in handy. No fuel tank removal!
If you ever have to do that job again I have two good tricks that make it easier. I always drilled and tapped a hole in the cover for a 5/16" bolt in a spot that would hold the reverse detent lever over. After the cover is installed thread the bolt out the detent will snap over to the reverse shaft put a little silicone on a short bolt thread it in to seal the hole. Also put a socket or nut under the park linkage on the cover to hold the park pawl out of the way. Clean the reverse shaft with emory cloth and that cover will drop on no problem.
Every brand of tractors has there problems, we grow to love what we grew up on. You learn to fix them and come up with home made tools along the way. Great job for trying and not giving up!
Good job guys, them old beast will last a lifetime with a little tlc.
Been there done that job before. Then got rid of the 986 and got a 4440. All JD's here now except a 766 that has sentimental value.
Great video I had a 886 love those 6cylinder and high and low really good hay tractors..
A IH 1086 was the largest and newest tractor we had on our farm. Did a lot of plowing in that tractor when I was a teenager.
I'd be happy with two 1086s to get all our heavy work done.
The IH tool tool to keep the reverse shaft down in the shift fork does work good. It basically pulls the cover up by pushing down on the reverse shaft.
Good job! That is a job I will have to do at some point on our 706. But for now with just the right amount of clutch, brake, and lever action I can still hit reverse and most of the time hit the 3-4 side of the gate lol!
hahaha, you'll get annoyed with that one day.
Hi mate i reckon you should put some duels on the 1086 and a good restoration with video cheers Damien Skinner. I love watching your videos awesome job mate
Your dad is a cool cat. That's good news!
I saw one or two opportunities where I thought a bigger hammer might have been fun. seriously Jacob that was tricky. but then with farming there is no other choice but to keep up a good fight.
I know I’m late but I like to put a safety wire on that spring so it won’t come off in the transmission like the original ones did. Also we always make our help put our 86 series tractors in neutral and let completely out of the clutch just in case it’s still stuck in low range before you put it in park or it will cut all the teeth off the reverse gear.
Good luck with the 1086
I thought about doing something to ensure the springs positioning, but after the first one stayed for forty years, I hope this new one will survive that long. Then we shall see about the state of the rest of the machine.
Least you can fix it with tools rather than having a dealer plug a laptop in
Yep
Good to see you keeping the old girl running with doing all that work to it you should try and get the doors on and tidying the tractor up and put some nice lights on leds would help you and at least you would have a good working tractor with working lights so you don’t need to strap your battery powered light to the front of the tractor
"Lights only let you loose sleep."
It needs some deep inspection on the wiring to get any light functional first.
Jacob that was very interesting nice video.
Thank you
good job
Thank you
Nice job on a difficult repair!
Thank you
Farmers must be everything from computer engineers to landscape architects and everything in between.
By the way great job on repair little brother
Thank you
That range cover is a real bear. Had it off on our IH 3788 2+2. Replaced the shift lever with the updated one: www.hy-capacity.com/index.php?page=Search&partid=2001
Cover removal and installation tool available from any Hy-Capacity Dealer: www.hy-capacity.com/index.php?page=Search&partid=1992
I can't decipher the use of the bit on the right of the photo. The center and left pieces we substituted a a pieces of rod and a hammer.
@@boehmfarm4276 Memory serves me, you use it to accomplish the same thing that you used the string for.
I truly wish you was my neighbor so i could help with hay, and learn about row cropping, and silage, really need to know how to make it right, next year growing 25 acres of regular hemp to make silage feed for cows 3 years ill be in the first hemp fed beef youll find , its gonna be bigger than organic or grass fed, not to mention its a higher quality feed than about anything else, and your cattle will be much healthier
Only way for our cattle to be healthier is for them to finish in a year.
Hope it works for you, hard work on them 86 series models I have a 1066 and 766, The 766 is in need of shifting work, and a clutch!
At least it is work I can do myself.
There is a farmer out there that makes a shift kit for those tractors it's a lot better then the factory parts. Can't remember his name see if I can find it for you.
Save Gas, buy a John Deere .
They only run half the time ;)
Cause they get work done twice as fast!!! HAHAH!!
ha
ha
ha
right....
John Deere always burning to the ground lol
@@damienskinner3602 i want to burn my 986 to the ground because its an absolute piece of shit.
How are the pigs doing ? would be nice to see an update on that last batch .
They are eating, pooping and growing.
It nice father and son I wish I had that.
Have you thought of growing hemp, i just received my license gonna grow 1 acre of cbd hemp, should yield 2000 pounds of flower for an average of 50 dollars a pound....its federally legal now...you and brad oughta try it. Itd be a great addition to the farm
Who's! That is a lot of zeroes for 1 acre. Unbelievable!!! They should grow it
Do you have a buyer ready and waiting?
@@boehmfarm4276 Now you are sounding like my dad. In our area, when we were farming, the farmers got together and built their own Canola processing plant. It is still there and about three times the original size. They sell to their own cooperative. They also did this with a natural gas processing plant. Everyone signed up for supply to house, garage and machine sheds. Sure beat propane tanks. And if course that coop now ships into the natural gas lines feeding the USA. So you may have to investigate co-op feasibility... But big money!
@@boehmfarm4276 yes we have a collective of 63 farmers in my area, it is all sold just have to get it there
Just out of curosity. I am an IH guy myself, I have been driving a 784 4-wd for nearly 4 years now. And when the time comes to change tractor i've looked on other IH tractors. But I've also looked on Zetors and Belarus/MTZ, I like the big cabs on them and the simplicity in them. Whats you're thoughts on those commies? Also, great video. Love the 1086, shame they nearly don't exists in Norway.
The Zetor Crystal 8011 12045 16045 were some tractor
We have a Zetor 120 on our farm does all tillage amd heavy work. Their is about 500-1000 hours and only problem is twitch my grandpa forgot to close the door and it got caught on a trailer or anything and shattered. But their great easy to work on cheap parts cheap to buy no computer and electronics crap so anyone can work on it. I mainly believe in that you pay more for the colour of the tractor look at a120 hp John Deere compared to a Zetor 120-140 I bet the JD I more and the Zetor may do a better Job?
preston kerr never had a Zetor but neighbors have and they seemed like a good tractor. The problem when buying a tractor is different for many ppl, where I live getting parts and resell is everything, so Yes a Jd is gonna cost more but parts are easy to get and resell is high. If you plan on keeping the tractor forever and can wait for parts in the mail then don’t buy a Big name brand.
I'd love a 784 with front wheel assist. I'd keep it till it dies, rebuild it and forget any other tractor anyone else made afterwards.
The 1086 exhaust is more crooked than a politician. Please Subscribe to my channel.
Yeah, it needs a new muffler to remedy that, but the muffler still functions at noise reduction.
Did you go to the farm show
No
I was wondering how your harvest went, were you able to get everything in and how the beans and your corn did?
Well, there's still video to edit, and still some corn left. The beans grew well, but harvest delays killed.
👍👌🇨🇦❤
International made great tractors until the case days. Never cared for a case....internationals torque amplifier or high low never worked very good...everyone i know with one removed shift lever so people didnt use it....to keep from grenading tractor....i was always partial to deere growing up in Illinois, but i personally only buy orange these days ive found kubota to be unbeatable for general utility and haying tractors...hard to beat the fuel economy and reliability
I always found swearing loud and long, using several accents, to be beneficial when standing on my head, trying to make unwilling parts fit. Give it a try next time.
I will, thanks.
can you play fs17 with mods of all the tractors and combines and stuff plz thx and cool vid
Why fake farm when I do it in real life? My dream is to have enough clout from the channel to have map made with all our equipment as mods.
@@boehmfarm4276 yeah ur right i just really want to live on an old farm like yours and go from old tractors and stuff to new ones and i have fs17 so u know we live on a old farm: no animals no tractors we have nothing we have a house and land u see i just want to farm like you
When all else fails....Get a bigger hammer and stay with it, till it fits.
yep