How To Replace A Basement Window / DIY Home Improvement / Step by Step Window Installation
Vložit
- čas přidán 17. 01. 2024
- In this video, I will show you how to replace a basement window. Like most home improvement projects, there will be some unforeseen complications along the way. In this video, you will see that I too have some problems along the way, but luckily, I am able to work through them. If you have the tools and the desire, you too, can replace your basement windows. Basements are great place to learn how to do home improvement projects. These are places that allow you to make your mistakes without drawing too much attention to them. In other words, since nobody’s looking at your basement, you can make your mistakes there so you won’t make them when you are doing these home improvement projects in more noticeable places.
My Etsy Shop: etsy.me/3qgDnr8
My Website: www.artisanmadethings.com/
Follow: / artisanmadethings
Materials
Window (measure with at least 1/4 inch spacing (3/8 is optimal) on the sides and top of windows.
Treated 2x4 or 2x6 (this depends on the pre-existing frame)
Construction Adhesive: amzn.to/420mwgX
Window and door foam: amzn.to/3vGobMw
Window and door caulk: amzn.to/3U00Qj1
Window flashing: amzn.to/42alm2n
Concrete anchors and masonry bit: amzn.to/3S64rcR (Smaller quantities can be purchased in local stores. Purchase desired length. I usually double the thickness of the material I am attaching.)
Window well cover: Check local suppliers for for your desired size. Lowes and Home Depot sell them as well.
3 inch screws suitable for treated wood: amzn.to/3tZx97a - Jak na to + styl
Kudos to ANYONE who makes an informative video on how to do ANY DIY project. Yes no one is perfect and ALL DIY projects are usually finished off with plan D.1.2.A 😀 😂
Thank you for this video. I have a 50 year old window that is steel frame, concrete poured around it during house construction. Pain to cut it out but it is in dire need of replacement. Too expensive to hire it out. So it will be a DIY, which most all of my home projects are, i was just researching some ideas. Again thank you 👏👍🙏
Hmmm ... "Well equipped to handle anything that is unexpected" 😂 I think that means a credit card and enough gas in the truck and available time for six trips to the big box store to buy what you thought you needed. Nonetheless, I will continue to think that "this should be pretty easy" and do it myself. But each project brings with it new knowledge (and probably tools) that makes me more agile for the next undertaking!
Btw... a plastic bag inside the window well while you're doing the work would help keep dirt and debris out of the caulk and foam.
This is very true. How many tools do I have that I only used once? Too many!
I live in upstate NY and need to do this exact same thing…and have been seriously procrastinating! Thanks for sharing!
You’re not alone. lol.
so thankful for this video. I was DREADING replacing my basement windows....although I'll wait until spring😂
Good information for any window replacement. No basements here in West Coast Florida, but have fond memories of our basement in New Jersey where I grew up.
You did the right thing getting out of here.
Good job
Nicely done!
Nice video, like the explanation
Any suggestions for a decent frame but a window that's a little big for it? I had been trying to chip away at it with a reciprocal and use a grinder. It is all so awkward. I wouldn't have much room for foam.
Good stuff, did you have to shrink your window due to adding 2x4 around the whole jamb? That’s 3” total lost on the extra framing.. looks good tho, I recommend using OSI quad max for the sealant, stuff is the bees knees for sealant
Thanks for the tip. Window was close to the same size as the old one.
Amazing work 👍
Thank you!!!
Thank you teacher :) You should have listed the things twice :) ... in the beginning and the end.
Great video! Question, if you are finishing the basement should you use pressure treated wood? Just concerned about the fumes from the wood' s chemicals. Can pine be used? I would have liked to have heard more on how you determined the framing dimensions.Thanks in advance for the feedback!
If the wood has repeated contact with moisture you should use pressure treated. I’m no expert in the science but I think with such a small amount of lumber it’s not a concern.
Just wanted to mention that you should check the manufacturer's documentation on the Protecto Wrap tape you used. I'm pretty sure you can't leave it exposed like that. You will need to cover it. It usually only has a short UV exposure window.
Usually it is covered with siding. There is no harm in leaving it exposed since the alternative is to cut it and expose the treated wood
"Now you've got something."
I would have gotten the foam wrap that goes around the window, it fills that channel around the whole window.. it makes a big difference in drafts when it gets cold. you will feel leaks. .
No leaks here.
What vacuum did you use ? Thanks
An old rigid shop vac.
I have to replace some similar basement windows on a 1932 house, what size is the window you bought it error. I might be able to take off your hands. if the size is good just quote me a price and we figure it out.
I have it in the attic. Are you from Long Island? If so, I will go up there a measure it.
yes, Nassau County@@ArtisanMade
verns wifes eighteen five
grates asphalt alieda drive
5