Shimano/Campy Front Derailleur Won't Shift Up Onto A Bigger Chain Ring | 4K
VloĆŸit
- Äas pĆidĂĄn 8. 09. 2024
- Campagnolo / Sram / Shimano Sora - Tiagra - 105 Front Derailleur Won't Shift Down On Smaller Chain Rings Like and subscribe for more videos to come and to support the channel!
Every cyclist should Have all these !
đșđž For people in USA:
amzn.to/3mVgoRxâ Castelli Mortirolo Jacket amzn.to/36ROC2Uâ Fizik Bike Shoes amzn.to/2In0EYAâ Castelli Jersey amzn.to/3jEDCclâ Parktool multi tool amzn.to/2UCAm7eâ parktool screw drivers amzn.to/3fe40JFâ microfiber towels amzn.to/3kFxjpjâ CL1 parktool Lube amzn.to/32ZbkDPâ AWS-1 Wrench amzn.to/3kLeocXâ Tire Livers amzn.to/3303xFMâ Floor pump amzn.to/2Iop8ARâ Giro Agility helmet amzn.to/3qE4rlxâ Gopro Hero 9 Black
đŹđ§ For people in the UK:
amzn.to/3nI7ZAtâ Fizik Bike Shoes amzn.to/3ijcn8lâ Castelli Jersey amzn.to/3sh8Xr3â Parktool Multitool amzn.to/2MPQ9iiâ Parktool CL-1 Lub amzn.to/2Lp4XEcâ AwS-1 Wrench amzn.to/2LLeEfYâ parktool pump amzn.to/2MPQKk2â Gopro Black 9
đšđŠ For people in Canada
amzn.to/3nFCOWuâ Fizik Road Shoes amzn.to/3i8FGu2â Castelli Aero Jersey amzn.to/3bz39Duâ Multi tool parktool amzn.to/39vhxKpâ Parktool Lube amzn.to/35D99Y6â Parktool Pump amzn.to/2LkCbouâ Aws-1 Wrench amzn.to/3bz2L7Oâ Gopro 9 black Here you can purchase my bike quide and you can start buying your collection of finest bikes, as well as flipping bikes for profit. gumroad.com/l/... / ivansbikes Business email: ivansheraton@yahoo.com Paypal: www.paypal.me/... FILMING EQUIPMENT Camera Tripod-Monopod amzn.to/2Mud3qs Samsung S9 Cellphone amzn.to/2Ona3wx Canon EOS Rebel T5i amzn.to/2vprgyz IVAN'S FISHING VIDEOS (My fishing channel) goo.gl/UHaJUJ RJ The Bike Guy
thank you for pointing out the problems
Mary huge thanks for supporting the channel.
The tension seems fine, but the shifter (which rotates) of extremely stiff and impossible to turn. But when there's zero tension, it shifts fine, so I don't think it's a shifter issue
Are the limit screws adjusted? They could be blocking the movement of your derailleur.
@@IvansBikesBmws they are perfectly set. I took apart the shifter thinking it would be dirty, but it's clean. The derailer is at the perfect spot at the 3rd and 1st gear. It is just insanely difficult to twist the gears when trying to shift up. Down is no problem
@@michaelfrymus
Your shifter has too much friction on it and it needs to be taken a part to be relubed. That is the only suspect left.
@@michaelfrymus i have the same new cables new derailleur and nothing no chance set big ring you can break finger :/ pain in the ass
Thanks for the informative video, was able to fix the derailleur
Raymond my pleasure. Please consider subscribing.
Tysm keep up the good work man
Thanks !
Check the cable tension and limiting two screws.
my shimano front derailleur won't go to the big gear. it takes 3 clicks to get from small gear to the middle and getting the 4th click is extremely difficult. The 4th click does not get me to the big gear. The H limit screw is all the way up, so there should not be anything blocking the derailleur. By click #4, its the derailleur seems to be stretched over to its max with the cable being extremely tight. When down shifting, i can feel the feedback as the tension cause the derailleur to snap over to the lower gear. There is no dirt or debris build-up, and the cage has space to clear the big gear.
Help =)
Willie it still sounds like it was not adjusted properly. My advise, play with inner cable so that you have enough tension to get it to shift on the biggest cog. That is considered the limiting screws are set properly as you described.
Let me know if that helps.
got the same problem
I have the mech position on point, cable tension is the max I can do (and using in-line tensioner), screws are set appropriate, but it's like the mech just can't do it. What's weird is that it initially worked ok, but only briefly.
@@IvansBikesBmws I donât have any clicking in my front shifters
Sir my shifters doesn't shift frim2 to 3 in ine click it takes 2-3 click to do so. And when i try ti check it on stand it works perfectly so us it pa proboem with my gear or i am doing somethung wrong,i am a newbie
No matter how much I loosen the barrel adjuster or tighten it, or mess with the hi and low limit screws, I can't get the derailleur to shift to top gear on the front sprocket. Would loosening the bolt that keeps the cable attached to the derailleur and tightening the cable make any difference?
Yup. Always check the cable as well. It probably has cable slack , so you it will not push on the biggest ring.
And give an update after pls.
Beautiful bike
Thanks for the kind comment. The comments help with algorithm so other viewers benefit from it.
Why does my bike not shift up to the big ring when climbing a hill but works on the flat without any issues thanks
I have seen that one my bike. The first thing to look is your cable tension. There is usually lots cable slack. Your cable needs to be adjust just a bit.
Thanks Iâll try that
@@jeanchristie5468 whenever you can not get that chain on the bigger chainring, that means you got some slack in the cable preventing it to do so.
My shimano gear is not shifting to 3 and 2 ring the medium ones and the biggest one it's stuck on the 1st one what should I do
it needs more tension to move it up on the bigger chainring
Please it it a like and glad I was able to help. Thanks
Is it also possible that not shifting between rings has something to do with the chain and/or tension on the chain?
Not at all. I seen bike shops test the front derailleur without a chain. I do it to when I do the installation from scratch.
My shimano tiagra wont shift to big ring, it doesnt have click if i try to shift it from lever
Joe the front derailleur is not going to click because it is not indexed like the rear derailleur. Try adjusting the limiting screws and you will be fine.
@@IvansBikesBmws thanks, it works
If you need any questions , I am here to answer
I have ques but it in language hindi
Can i ask in hindi
@@mdajmalkhan4098 I mainly answer in English.
Please help - cannot shift from large to small. Giant, Shimano 105
@@nikmalinin8786 Gotta adjust limit screws on the derailleur and you be good
Nothing happens when I loosen or tighten the H and L limit screws.. My bike will only shift down but not up
Andreas your cable needs to be adjusted. It seems there is slack and it will not push it on your biggest chain ring.
@@IvansBikesBmws I've tightened the cable and there's no slack but it still won't shift. It's not just up to the biggest chain ring but it won't even shift up to the 2nd biggest
@@andreashenriksen1485
There is definitely a problem. What happens when you test the front derailleur with your finger? I always test it manually by pushing it up on the biggest chain ring just to see if it works. I have seen it stuck sometimes.
@@IvansBikesBmws The front derailleur moves just fine when I use my fingers to push it - So it moves freely
@@andreashenriksen1485
Okay , that is a good news. So there is an issue with cable not giving it enough force to shift onto your bigger chairing. Have a look at the cable and shifter again as the issue is there.