ArdubroFX Mini Trilogy - Public Domain PCB's
Vložit
- čas přidán 26. 06. 2024
- I've finished a set of three slightly different Arduboy FX compatible handhelds. All my files are now available from the following links :
OSHW Labs : oshwlab.com/mzoid/ardubrofx-m...
TinkerCad Share : bit.ly/4bnZiED
There is no actual build guide currently. Just notes on the OSHW site.
The original Arduboy FX and Arduboy FX Mini site : www.arduboy.com - Věda a technologie
This is really awesome
Brilliant! Thanks for all the work you put in to publish your designs. I think the screen on the right is the best...
No thanks needed Lee. I was thinking of sending the one on the right to the States 😉 Just waiting for stick-on pads. 😄
Hi Megazoid if I send you something could you possibly design a case for it? Its a calculator of sorts, similar to these
Hi, Is the firmware instruction suitable for the second board?
The second board? ArduBroFX-ProMicro-Regular? if it's that one, the "Burn bootloader" instructions are the same as Mr.Blinky's DIY Arduboy GT project (link on my oshwlab page).
Both projects I listed have good instructions on burning an ArduboyFX bootloader.
The Teensy and ProMicro-Regular :
* From the tools menu select Board > Arduboy versions > Arduboy
* From the tools menu select bootloader > Cathy3K (starts with menu)
* From the Tools menu select your programmer (Arduino as ISP when using an Arduino)
Burn bootloader
ProMicro-Alternate-Wiring
Very different Arduino IDE settings. Refer to the settings shown on the "Arduboy DIY with FX" hackster project (link on my oshwlab page).
Hi, I really liked your project! Where can I find the gerber file?
I thought people would probably create a Gerber using the Fabrication tool in EasyEDA (Fabrication menu > PCB Fabrication File(gerber) ). However, I've now added the ready made Gerber's to the OSHW Labs project page (link in description) at the bottom as attachments. Pick the one you want. The boards are regular thickness (1.6mm). All tested and working, but build this project at your own risk 😉
@@megazoidThank you very much!
@@megazoid Hello, which board is better to choose?
LOL, you've got 666 subscribers! 😆😆😆
Uh ho! 😯😲
Hi, What kind of PNP transistor is needed?
You need to look at the BOM list on the oshwlab project page.
Hi, Portable Activator The link to the file does not work. Where can I find this file?
I can't post URL's in comments, but it's in MrBlinky's GitHub page > Arduboy-FX-mod-chip. The link in the "Arduboy DIY with FX" Hackster IO project works just fine BTW.
@@megazoid Thanks you!