Trimmer won't stay running, fixed.
Vložit
- čas přidán 27. 08. 2020
- Links to products I have in my tool bag.
Compression tester. amzn.to/2NMgeze
Spark Checker. amzn.to/3bnXjmA
Tygon Fuel Line. amzn.to/3aCGntm
Carb Adjustment tools. amzn.to/3k7cgxe
Primer Bulb. amzn.to/3dC0WYK
Fuel Filter. amzn.to/2ZC0T7i
Thanks for watching. This Stihl trimmer starts and runs but it won't stay running. Fortunately the fix was pretty simple. - Auta a dopravní prostředky
I don't watch vids that are too wordy and poorly shot. This was PERFECT! Clear, concise, and to the point.
Thank you Mary Vogel
Thanks for the video. My trimmer was running rough even after I changed plug and air filter. Watched the video and checked my screen in muffler. Clogged with carbon deposits. Burned carbon and used wire brush to clean screen. Runs like a champ now! Thanks again!
Glad it helped
The first two minutes of your video helped us find what we spent days trying to figure out! Thank you!!
no problem and thank you
I bought the disposable weed eater when that all I could afford. I now have an Echo and it’s been wonderful I actually let my wife pick it out since she does 90 percent of the weed eating. I have an old 034 Stihl chainsaw and I wouldn’t part with that baby ever. I think they are all good depending the job matches the product. Care is what it’s all about
You are absolutely correct about that
Thank you for making and posting this video. Shows me how to adjust the idle speed and low/high mix. (Very clear explanation). Thank you for the explanation of the work you did in this video. God Bless.
Glad it helped
I own an FS-91R and love it. It really helps with the thicker SE Louisiana grass. (Dat torque!) I have a larger yard too so the extra fuel capacity ensures I don’t have to go back to my shed to refuel. It is heavy, but I added a Darwin’s Grip and a speed feed to make the job easy. Plus I’m a big guy so weight isn’t and issue. The factory Stihl head is ok for a tap and go but the Speedfeed is way easier to re-spool. Echo has Stihl in that department. I figured I spend a little more ($300 new) for a unit I can maintain for a decade or more rather than a cheapo unit that will last a couple of seasons. I contemplated the FS-94 as an alternative but I figured the extra torque would be better for the pole saw attachment or brush cutting when I needed it.
You can't argue about that torque. Thanks for the comment
I have a Stihl fs74 trimmer that is ~30yrs old.
Last few years it was not running well. Pretty sure the diaphragm was shot, but put a whole new carb on it last year, and it ran pretty good out of the box. But this year I had the same problem as described in the this video - runs but quits at idle after < 1min. So followed the tuning recommended by adjusting the Low jet screw to give it a bit more gas at idle. Got it running perfectly again!! Thanks for these video's you put up, they are super clear & very well done.
And yes btw... I would highly recommended Stihl. They make great power tools.
No problem and thanks for the comment
I would pick up a used one in a heartbeat! I use a friend’s Stihl on his yard and a Shindaiwa on mine. I use a shoulder strap on the Stihl but don’t need one for the Shindaiwa because it is so light.
I have a Murray and it did the same thing, took the carb apart cleaned it, still the same problem. I used a cut off wheel cut slots in the screws 1/4 turn and it worked fine, I wound up turning the screw close to the engine 1/4 and the outside screw about 1/3 of a turn. idles good going from idle to full throttle it's smooth and fast .
Glad I found your channel
Seems amazing that such a small adjustment makes such a big difference.
Thank you SIR for posting this video
No problem and thanks for the comment
Great video! I have had one of these for three years and has been flawless. Lots of torque
Torque seems to be one of its best traits. Thanks for the comment
I grew up using stihl, its what my dad always bought. Every year we spent hundreds on "tune-ups" between our saws, trimmers, ect. Now that I have my own house I bought a husqvarna saw and it's never given me trouble. I do try to take good care of my equipment. I have switch everything to husqvarna and i am happy with how they run.
I'm glad you're having a lot of success with them and thanks for your time
@@MightyGimp I’ve heard guys say this for either brand. I’ve had a husky saw since 09 for processing ab 2 cords a year, basic harry homeowner use.
Been great so far.
@@MightyGimp I don't recall seeing professions with a Husky. Maybe they do, but Stihl seems the most popular choice.
@@shegocrazybecause they're cheaper lol
Yeah stihl sucks, I'm not a huge fan of them
Thank you for your time in producing and uploading the video. I have the same trimmer with exactly the same issue. Its now fixed thanks to you. Cheers!
Edit: I forgot to mention that I subbed to your channel as well. Thanks.
thank you bb1490 for the sub, I appreciate it.
same i sub@@HomeGaragechannel
I bought a sthil trimmer. It has been good for trimming around the house.
yes I completely agree with you
Thanks for taking time to show us. I hope I can fix mine after watching here.
thank you Darryl Carpenter I hope so too.
You make very great videos. My friends and I from Luxembourg always watch your videos ;)
thank you Its ChareIII for watching.
This is the same thing my Husqvarna is doing. I replaced the carburetor, spark plug, fuel lines and filter. The Air filter and as soon as it warms up it dies. I will try to adjust the carb. Hopefully the same as your Stihl. Thanks for putting this video out.
no problem
I've had the same Stihl weed trimmer for 20 years now and I haven't done nothing to it FS 56 RC runs great
Wow nice running machine. What's your secret?
Yeah what’s your secret , ethanol free fuel , maintenance every year?
@@HomeGaragechannel Hey man, great videos. So much good info. My stihl fs 56 only runs at full choke. If I give it gas by pulling on trigger it sputters and turns off. Just got before last summer and this year when I went to use it this was the problem. Got any suggestions for that?
@@ronsin777 sure, try turning the L screw counter clockwise about half a turn, and turn the Idle screw clockwise about 1 full turn.
The only dealer we have in our town is Stihl so that's what I've been buying for 28 years. I've probably bought 20 Stihl power tools. I
Think 19 of them have had carburetor issues. If there was another dealer I would go there. They are also expensive and rarely go on sale. I've tried taking some back for warranty and they never honor it, just make excuses. You Tube has been a big help with maintenance. I've been doing a lot of it myself. I own a landscape maintenance business.
I had a STIHL FS56 RC trimmer too. I got it on July of 2015. But I had to sell it year on August. Because we moved to South Carolina. And the private gated community I live in. They not really any grass there except for small parts. And plus since it’s a very quiet community people don’t like gas equipments. The only gas equipments I see are when the maintenance people in our community are trimming grass and weeds. And two of my neighbors have gas power leaf blowers. But thankfully since I work for maintenance at our golf course I still get to use gas power equipments there.
How did you like that fs56 rc? Was it heavy?
I own several chainsaws, blowers and weedeaters made by Stihl. They are reliable, durable and require little service as a homeowner with 3.5 acres to cut and trim. As a retired automotive technician I find it no more problem to service than anything else I've owned. Never been back to the dealer for service. Most problems are fuel related and I dump mine at the end of the season and only use premium fuel. Works for me.
thank you Larry Dering for sharing your experience .
Stihl all the way I have a trimmer I bought in 2003 brand new and it still works excellent. As long as you keep up on maintenance it will last
You are absolutely correct about that. Thanks for the comment
I bought Stihl products new. Yes, they are expensive, yet are of high quality. I own a FS56CE and it has not gone wrong in nine years. It is a great machine.
nice
Best video yet. You've outdone yourself with how much time you took to video and edit. Thank you.
Thanks man I appreciate your comment
@@HomeGaragechannel Hope your wife knows she has someone awesome.
@@999thenewman lol.. yeah I think she knows
@@HomeGaragechannel Careful now, she reads these comments.
I have a UK Stihl FS38 and it's doing the same thing so will have to look at that as it's embarrassing when it keeps cutting out. Big up from Scotland 👍
Good luck, and thank you for the comment Ppp
Thanks! Fixed my trimmer because of this video.
Glad I could help!
Depends where you buy it from and your skill level. Stihl only sold at dealers that will start and adjust run it first. My experience with newer Husqvarna from the box stores is they typically need adjusting out of the box. Fortunately I was able to do that. If you can't I would purchase from a dealer that makes sure it runs!
Thank you Mike Buehler
Easier that I thought to find. Its on the way! Thanks for the video!
Glad I could help!
Thanks mate! I fixed my whipper snipper, back on the job now💪 Cheers mate👊
no problem and thank you for watching
Stihl has definitely been worth the money for me. All my equipment is Stihl now and will be Stihl in the future if things remain the same.
Thank you Albert Banks for sharing your experience.
I have had an FS 45 trimmer for years and had running problems. The selling dealer was over a month behind in repairs, so I bigger a new carb on eBay, installed it and it runs great. That was when I switched all of my 2-cycle engines to canned pre-mixed fual. No problems since. Eould I buy another Stihl? No. You can't get parts just anywhere.
wow thanks for sharing our experience. I appreciate it.
I’ll take Stihl any day over any other brand I’ve had one for years .matter of fact the one I use now I’ve had over ten years it’s a fs 55r it’s a little heavy but will cut through anything and if your not cutting thick stuff you don’t have to run wide open I try to talk my friends and the people that bring me there weed eaters to fix to get one they cost a bit more but if you take care of them I feel like they will last a long time and save you money in the long run . Great channel be safe
Thanks Randy Griffin. They are definitely great trimmers I would love to get new one some day.
Older Stihl equipment is great. However the newer ones flood easily & can be hard to start. All my personal 2 cycle equipment is either Echo or Shindiawa.
Very good point. Thank you Alan Marshall.
Thumbs up echo!!!!!: been using their backpack blowers for over 12 yrs 7 days aweek they flat out run... we do use stihl handheld blowers n saws but echo makes a damn good saw as well
Great choices...note Shindaiwa and Echo = same parent company...like you I prefer these brands over Stihl also...
The adjustment screw worked for me. Thanks!
you're welcome
Thank you. I followed your step by step demo and solved my problem.
Glad it helped
And just like that, mine just kept running, thank you so much for this video!!!
Glad it helped!
thank you for the vid man! I was afraid i was going to have to dig into the carb again but it just needed a small adjustment
Glad I could help and thanks for the comment
Stihl FS 56 C has been very good on 6 acres fence line for three years with minimal maintenance.
very nice trimmer!
Well I just bought a FS 56 for 200$ new, and not long ago I bought Echo 2320 for the same. So far running both The Echo has a better balance a couple inch's longer shaft. I would say the Stihl has more torque an is more stable on the back of a truck. Echo has a pretty strong motor for 21cc though were as you have a bit heftier motor on the Sthil at 27cc. So far happy to have both my Kawasaki ktf27b has seized up. I took the spark plub out an could see metal all round the piston moving. Not good lol had her for 16 18 years though so was a solid machine.
Thanks for sharing your experience. I'm sure it will help people make up their minds.
In a neck and neck tie - I would recommend the Echo since you get the best SpeedFeed head in the industry without having to spend another $50 and install it...but I prefer the Echo or Shindaiwa trimmers anyway...
I love stihl they are a great company
I 100% agree with you
In my experiences I think stihl trimmers have more torque but I found they also have the most problems, especially with the carb. Echo’s are cheaper but have less power, but they also really reliable and last wayyyy Longer then stihl. That’s just my opinion. Have a good rest of your day
You put that very well. Thanks for the comment
Not one minute of regret on my Stihl purchase. My complaint, if any is that I should have purchased a rancher model based on my yard. Four years no issues. Performed my spring check, burn off the carbon & now adjust the carburetor. 👊🏾
thank you for sharing that
I had the exact same problem with my STIHL trimmer and I just purchased and received my replacement carburetor last night. I didn’t think to adjust the screws (and your runs perfectly). Yet I think I’ll replace it anyway
thank you Tymothi Coffee.
I bought a used Stihl trimmer from a guy I worked with because he bought a new one. About a month later he ask if he could buy it back. Told him no and I still (stihl) have it. That must be pushing 20 years ago. Good trimmer.
Oh yes very good trimmer
How dare you?! Not nice Mark,not nice...lol nah jus kidding. Give him the 🖕..... 😂😂👌
@@Lawless187indika Actually I didn't say no right off. I offered it to him for twice what I paid him. He declined. No pleasing some people. ☺
I own 2 stihl fx94r and 2 echo srm-2620T a Stihl FX100r and a Stihl 110 and 130 Kombi system power heads I truly believe you get what you pay for.
I also believe the same thing. Thanks for the comment
Good one mate.. quick tune and it’s good to go again....
Yes luckily it was easy. Could have been worse
@@HomeGaragechannel yes mate
Enjoyed video as I just got done weed eating yard. It doesn't stay running every time so will review video again before working on my Stihl.
good luck to you
Have three of their tools love them I’ll have to find that tool to adjust the carb. Thanks
no problem and thank you Nick Acoutin
Worth the $20 to order a full set from Amazon...then you can adjust all brands 👍
I owning nothing but Stihl. At 49, I have plenty of time behind saws, trimmers, blowers, edgers. Stihl has always been my go to, I have owned Echos before and yes they are good. From my experience Stihl has always worked out for me. They may cost more, but I would rather have tools last me a lifetime or close to it, then replacing them every season.
thank you Kris W.
Good ol’ STIHL. That one just needed adjustment. No biggie. Never had a STIHL product fail on me. Reliable as hell. Well, that’ll go for most brands if maintained correctly. But, ya know, unfortunately a lot of people in this don’t give two shits about their engines. Anyway, great video!
Very well said thanks for the comment
Home Garage can you tell me If a trimmer runs rich will there be black stuff around the exhaust pipe I think it might be burned oil but I am not sure
@@flix8743 I'm going to say yes. I hesitate because even if it was running slightly lean, it should still have carbon on the tail pipe. Its best to remove the spark plug and its thats black as coal then I would say its definitely running rich.
Thank you for the links.
No problem!
As a former service mgr/mechanic I found Husqvarnas hard to service (trained on Stihl), Stihl and Echo were easiest, but for quite a while had no dealer in the area (Echo) even though they were based/made about 100 miles from here. Now I'm more inclined to go with Echo as they keep their units more basic. Stihl and Husqvarna have gone to more "style/design" which IMHO makes them more complicated to get into for service. Looking pretty hanging on the wall, or sitting on the bench doesn't mean much to me.
thank you Todd Ostendorf for the great comment.
RIGHT! I agree with you totally. Looks don't cut the grass.
My Stihl edger idles low like this one, but it doesn’t quit by itself. I do like my equipment to idle lower because it consumes less fuel if I need to check something and don’t want to stop the engine
that makes sense.
Hi thank you, I'm normally pretty good with mix motors, I've checked all the usuals mix ,filters spark ect, didn't realize the the adjustment screws would move from normal use, I do have to adjust my chain saw but never figured it on the trimmer. Peace and thank you
thank you MarK Johnson.
Hello sir, I have an echo-30weedwacker, I watched the video on starts but wont stay running and figured that would do the trick and it probably would have except apparently, there are NO adjustment screws on the carburetor otherwise I checked all the usuals,and the filter in the fuel container. What else can cause it to start but not stay running? The adjustment screw I found seems to control the idle speed but not the fuel air mix flow. Any advise would be appreciated. Thank you.
sure, if you can't adjust the carb, then you must replace it.
thanks buddy that's was the problem I was having
no problem Billy Rayburn
If I was a
Landscaper yah it would make sense to buy a STHL. But as a home owner a MTD (Made To Die) will do just fine.
Lol. Nice
Hahaha
Yup keep making more waste and spending more money
If you are in the US...just buy an Echo SRM-225 from HD...$199 (at least they were before Brandon's inflation!)
The fs56rc is an awesome trimmer!
yes It is
I’ve had an echo trimmer for 25 years and it’s still going strong but I have a few friends with sthil trimmers and they completely broke after just three years
thanks for the information
I had an old handlebar Stihl trimmer but it was awkward to use. It was really a brush cutter but I had used Echo and it was really reliable so that's what I got. I wouldn't mind a Stihl but it'd have to be 2nd hand because Echo works just as well. Thanks and Blessings!
it's a real toss up so I'd say just get both
@@HomeGaragechannel There you go!
@Arsene Lupin III Mine had a carbide table saw blade and was as dangerous as a gun with a hair trigger and an itchy finger in a ivy patch. It wasn't worth much trimming being too awkward but was a terror to clear and underbrush with. Cut stuff 3 and 4 inches through in a blink from the back side. Wind it up and hold on. Never did break the shaft or gears but the Echo convertible was a lot more versatile.
@Arsene Lupin III I don't blame you one bit. If they can't breathe, they can't breathe. I've never had that problem but have had neighbors that have and I've been the maintenance man on others that have so I understand perfectly. My MS440 Magnum saw just had one exhaust outlet. Now it has 2. Anything can be improved upon, don't care what it is. YOU are the one that has to use it and there's no need for any more boat anchors. Gopher it and BLESSINGS 2 U!
@Arsene Lupin III Sounds like the price was right. Mine was 35+ years ago and bought new. Now I gave all my 2-cycle stuff to my son-in-law and we have 2 battery trimmers. They're not nearly as good as the 2-cycles but when you get geezerish you sometimes have to do something different.
Exactly my problem,
thank you
no problem
You’re the absolute MAN!
Thank you gmezg
I have the same trimmer and also my dad he has had his for 5 or 6 years.
nice, it's a really good trimmer to use.
Yes i ranned Stihl for 26 years but i didn't have any luck with their 4 mixes problematic,so i stick with Stihl 2 cycles easy to work on
I have to agree, I find their 4 mixes.. a bit temperamental
Yes in fact I have this same model and I really like it. The last trimmer I had was a Troy Built and it not worth the money. I rather pay more and get a trimmer that works.
I completely understand.
Didn't solve my issue but I learned something so thanks!
hey I appreciate it.
Maruyama trimmers if you can find one hands down the best most reliable very little maintenance needed ever worth every penny built the way things use to be built Japanese perfection also Tanaka is a very good brand solid machines
Oh I completely agree with you. They are definitely worth the money.
Is this what you do for a living? You make really high quality videos.
No its not. Thanks for the comment
Home Garage oh ok. Was wondering how you come across so much equipment. Maybe a side gig then.
@@makibnadam most are from friends and family
Just bought this exact trimmer yesterday and am already having this issue. I’m about to try and adjust it but… 1 day old and my 1st Stihl! I’m not impressed yet. 😏
I wish you luck with it
I have a Stihl trimmer and it’s always been extremely hard to start once the machine is hot. If I finish the yard in one shot after mowing I’m good. I’ve been told this is very common with Stihl’s
really? because It seems like a carb issue to me.
Mine does the same thing. Whenever I have to put fuel into it when hot it won’t start.
I have a Stihl auger that's always been finicky to start after adding fuel. It's prone to flooding, so the choke is only used when cold and only for a couple pulls
Hi thanks for ur video's
I have a fs 45 stihl trimmer where i have spark, petrol, im getting alot of resistance when starting and i have done alot of things to it like
Clean spark, clean the exhaust, new caburettor, new coil
Now im running out of idea's, im wondering if you have any bright idea's where or what should i do??
Yes, I would consider pressure testing the engine for a seal leak.
stihl,,all the way for me....
nice video...
Thank you raffick mohammed
Awesome video, thank you so much!
no problem and thank you for watching
Great video. Thanks. I'm headed back out to adjust my trimmer.
No problem Jeff H
@@HomeGaragechannel figures. Got it running right, then picked up some fishing line that's gone into the shaft. God is telling me no more yardwork today. Haha.
Excellent, thank you
You are welcome!
I only buy Stihl. I don't have a problem with the other quality brands, it's just what I have always used! Kind of an, if it ain't broke, sort of a thing!
very well put
We 've use stihl on the job for years, me personally owns a Husqvarna and think it's just as good.
they're good too
I have a dealer not to far from me so its easy to secure trimmers and if its giving problems i buy parts and repair it myself becuase its usually really expensive
You are very fortunate you have a dealer close to you. What model do you have?
Yeah we had the same weedeater so we had to buy a carburetor rebuild kit and it worked but is a carburetor always the problem
seems like 9 times out of 10, yes, it's typically the carb. But the problem isn't the carb, its the person who's not taking care of them properly. The problem is most people won't take responsibility for it though.
My fix was on the ignition coil at the rubber part at the top of the spark plug there is a black rubber wire that pushes into the backside of it and it must have gotten pulled away far enough for the spark not to travel to it so I pushed it back up the neck at the back and it works 100% the spark needed to connect closer to this spring inside the rubber head
thank you David Vancouver ,for the tip.
@Arsene Lupin III I’ve been happy with all my pieces so far but can admit the design of this spark plug is poor
I have a Stihl FS75 and it's driving me crazy. Tried running it without the screen in the muffler and air filter removed. Tried to adjust the carb and it still will not idle. Runs great when you rev it up. Hard to start after it gets hot and heat soaks. Think I'm going to check out a new Echo.
have you considered replacing the carb?
Yes i want to ask what kind of fuel do you use do you a gas and oil mix ir the ore mixed stuff you can by at home depot
I mix my own fuel. 89 octane and a non synthetic 2 cycle oil and of course some stabil.
I only buy Stihl products. I have several weedeaters that are close to 20 years old and still running fine. Same with chainsaws. I seldom have any problems with any of my Stihl products and when I do it is easy to get any parts and service that I need. A little more expensive, but like anything else in life, you get what you pay for.
Thank you Barry Henry. I also feel the same way.
I'm having problems with mine when I start it up it runs by itself without pulling the throttle sometimes full power
has it always done this ?
Stihl are expensive found a toro on the street and fixed it by watching your videod
I agree and thank you Ray Rodriguezr
Well done. Thank you.
thanks
Brill....again....thanks.....👍🏴
Excellent and thank you for the comment
If you didn’t adjust the idle screw, do you think the L screw adjustment alone would have fixed it?
no. if you have to adjust the L screw it will affect the engine idle so they kinda go hand in hand.
I have a very similar trimmer, I believe an FS 70. The setup is nearly identical to yours, but maybe just a size or two different. Anyway, I have fresh gas in. It starts and idles fine, but when trying to accelerate over 1/3-1/2 throttle, it tries to bog down and die. I tried turning the high screw up and down but seems to make no difference. It's only 4-5 years old and not used very hard. What could be the issue? I ran it only a week or two earlier and it was fine then. Thanks!
for bogging on during acceleration, I would turn the L screw instead half a turn counter clockwise instead. The High screw is for when it doesn't want to die at full throttle.
I still Run STIHL. I have an FS 56RC and now a 91R and they have been solid. Just use the top quality fuel and they will last. don't buy gas station crap buy pre mixed ethanol free cans at the hardware stores.
My leaf Blower is a Makita backpack though :)
nice trimmer, but I'm jealous about about that Makita. Thank you leadnsteel
@@HomeGaragechannel at least we are not California.. they just banned the gas lawn equipment
I know, those poor souls.
I have a Stlhl F5 55 RC Trimmer and it starts but its idling speed is underpowered. I start to trim the edges of garden always 10 minutes and it stops every time. I change the fuel, new spark plug and could not find fuel filter. The other point is adjusting Carby. It has been a good trimmer, need help in one direction to fix problem.
Dave help please!
replace the Fuel cap, I believe the air vent on it is clogged.
I have a Husky that runs great and I have no issues tuning it. I have a Stihl I got from a friend that only runs on choke. May just need a good cleaning. I need to get it to stay running in order to adjust it. This video was all basic stuff I already, know. Good vid though
thanks and this video was not meant for the advanced repair person.
i just got an fs91R for 50 bucks.. sold it same day for 250, needed carb adjustment..
also yes i'll buy anything if the price is right..
personally bought into the husqvarna 525 series, L string trimmer then ECS edger... looking into getting the 525 pole hedge trimmer next...
professional equipment stihl, echo, husqvarna = worth the money 100% of the time.. new or used
I definitely agree with you on commercial equipment
@@HomeGaragechannel hey man im stumped. Been doing this 15 years...
Have a bolens b110 string trimmer..
Getting spark, cleaned carb the primer isnt not pressing fuel into the cylinder but even when i prime it with gas and a spray bottle it still wont start....
Any ideas?
@@LegendMuscle can you get a compression reading for me in the engine? If that's good take the flywheel off and see if the key has sheared.
@@HomeGaragechannel i will compression test it but it felt like and sounded like it was good.. Is it worth fixing a key?
@@HomeGaragechannel yes it has compression. Lower around 12 according to my crap harbor freight gauge but has it. Suction with finger test too
Stihl, Echo, Husqvarna are excellent trimmers
Yes they are!
I've got a brand new husky and the fucker won't stay running on its second use...
@@Slingin_Bait checked spark? Fuel delivery? Compression?
I have a fifteen year old Husqvarna trimmer, every year I change the spark plug and air filter, on the third pull it always starts. When it'll hit the bucket my next trimmer will be a battery one.
interesting. Can you tell me why the next one will be electric? you're husqvarna has lasted so long i would think you would get another?
@@Amedeus1756 ohhh. That makes sense.
Nice video .. I just bought a echo 225 from a yard sale. The owner said he put regular gas with no oil and I bought it for 40 dollars and the trimmer is brand new. My question is can it be fix ? Please help 😂😂😂😂
Yes you need to buy a new piston with rings and a new cylinder and replace them.
I would like to try & buy a 4 stroke trimmer such as the Honda GX35 powered unit that my father has,Ryobi used to make them but they only seem to make either 2 stroke or electric powered line trimmers now so I don't know what has happened !
You and me both.
Why don't you like the two stroke? They are lighter and more powerful for the cc...no oil change, level check or starvation issues...I would consider a quality battery product if I only needed less than an hour run time...but at the EOD I like 2-cycle small engines best
You need 10000 subsscraibers. I like your videos 🤠
Thank you Gasper Ajdnik for the comment I appreciate it
I have the same trimmer, and im not sure what it is but a knocking/clicking noise happens when I press the trigger slightly. Checked the carb and it was spot clean. Should I check the muffler and the engine? Any ideas?
it wouldn't hurt but I can't really guess what would be making the noise without taking it apart.
@@HomeGaragechannel alright thank you, love your videos its interesting to watch!
Yes I would
I have to of the fs 56 and love them
nice. how have they been working for you?
Home Garage they are great no problems at all
mine idles but when I give it gas it just dies. looks like I need to crack it open and give it a look! thanks a lot for the video, if this doesn't solve it I know I'll need to swap out the fuel line next lol
that should work but I think replacing the carb would yield a better result
I have an echo 225 new carburetor replaced lines/primer bulb/cleaned the exhaust screen/new spark plug adjusted carburetor and it runs but dies if I let go of the gas
you still need to adjust the New carb to the engine.
@@HomeGaragechannel yea it was the top flat head screw on the carburetor couldn't find it anywhere on a vid until you mentioned it in this one runs great now