Smashing Out the Inside of This Abandoned Boat. The Start of a New Chapter | SAILING SEABIRD Ep. 48
Vložit
- čas přidán 30. 11. 2023
- Smashing Out the Inside of This Abandoned Boat. The Start of a New Chapter | SAILING SEABIRD Ep. 48
THANK YOU VERY MUCH to all the generous people who use the links below:
Ko-fi - ko-fi.com/sailingseabird
PayPal - www.paypal.me/sailingwayzgoose
Patreon - / sailingseabird
Amazon Wishlist - www.amazon.fr/hz/wishlist/ls/...
You can also follow us on:
Facebook - / sailingseabird
Instagram - / ___sailingseabird___
Business enquiries:
sailingseabird@mail.com
Don't forget to like, subscribe and click the notification bell if you want to follow this adventure!
Hammock Fight by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 licence. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Thank you,
Stuart & Marina & Seabird
For the plywood, suggest that you treat this material with penetratingly epoxy to resist rot and increase the strength.
Was ich persönlich total toll finde, es gibt keine vorgegebene Lösung für alle Arbeiten.
Jede Arbeit erfordert eine neue Planung, neues Denken.
I think that doubling up on the plywood can only help. Just don't forget to seal all of the end grain on the plywood before tabbing it in ... bilge water will wick into plywood really fast, so a good penetrating epoxy coat is essential followed by generous coats of bilge paint to perfect the seal. Best way to template is cheap pieces of disposable wood glued together with a hot glue gun (many you tube videos on this) ... you just cut up various lengths and work you way along gluing each piece to the last across the boat -- then trace the outline on the plywood and make slight adjustments to the final product once in place. You guys are killing it!! Keep up the good work!!
Great advice.
It's all a learning curve.
Cheers for watching 😃
Hi guys.
A stringer runs fore n aft to strengthen the hull. You are renewing the FLOORS, and doing a fine job of it.
Thank you for the vote of confidence.
Cheers for watching 😃
Buy a sheet of door skin. Rip it into 2" strips. Get a hot melt glue gun. Cut the strips to fit across the beam in two or three places, depending on the depth of the bilge. Make sure the ends are pointed and the points contact the bilge where you need them to. Cut strips with pointed ends to glue vertically with the points touching the curve of the bilge. Lay the template on the plywood and mark the points. String a batten along the points. Mark a line along the batten. Cut your template. Perfect fit every time. As to color, I like a semi-gloss white with the natural wood trim varnished. The contrast is nice and with the natural wood and white it provides a warm, nautical environment.
That seems to be the standard.
Great tip on the door panels, I'll see what's in the shed before buying more wood.
I'm sure I found some thin 🤔
Cheers for watching 😃
You could jump 13 double decker buses with those gloves!
Those gloves were a great find.
Cheers for watching 😃
I watch several boat channels. I really enjoy this one. As far as the structural parts. I feel you are doing right with the stringers. They need to be tough. Better than going back and redoing at a later time because you didn’t reinforce the way you are I think a good coat of paint to the interior will make you happier after you finish all of your work.
Hopefully, they're not a "too strong"
We'll see...
Cheers for watching 😃
Cracking on well guys… how about using strips of door skin ply or stir sticks and glue gun to make your templates around complex curves 🤷♂️ ? You’ll get there 👍🏻
We hope we get there.
Its a long journey...
Thanks for the tip.
Cheers for watching 😃
Marina noted that they are ‘innocent’ and I think I agree BUT they are not daunted. She and Stuart think about problems then have a go and are making progress. I like the minimum cost approach an dumpster diving which will also help them achieve their goals. Their greatest asset is the ‘can do’ approach and positive attitude. Keep up the good work team!
What kind words.
Everyone here is so helpful, I'm sure if we had any issues, we'll get tons of advice.
All of you are making this happen!
Cheers for watching 😃
I love Stu's optimistic approach to everything.
Wishful thinking...
Cheers for watching 😃
For the white wash use much (!) more paint thinner. Apply with a cloth. Layer after layer until you are satisfied. Go for it 😀 💪💪
Thanks for the tips!
It's all trial and error...
Cheers for watching 😃
Keep it up, guys, and keep warm. At least its not snowing down your way 😅
You got that right!
We're doing our best...
Cheers for watching 😃
I love these guys. Thanks to all Yous other lovers and supporters. ☝️❤️ from Tynedale Australia 🇦🇺
Thank you for being a supporter.
It really helps with our project.
Cheers for watching 😃
Ship happens episode 63, use a compass for your templates. I'm Robbo. Good luck.
Template: we use the spline and cardboard method. Great job. thought grey looked OK and the double plywood stringer should be extra strong. Stew, your a marvel with the sander.
Thanks for the advice.
Hopefully the next template will be better.
Cheers for watching 😃
I’m always surprised at the things Stu finds dumpster diving. I think the white walls will brighten up the boat. Oh glorious sanding as Mads would say.
I really enjoyed this episode. I hope you get a process you are comfortable with for the remaining stringers. I personally don't like the whitewash and just LOVE the wood itself. Anyhow, great work!
We'll find what works.
Only have five or six to do but each one brings its own challenges.
Cheers for watching 😃
Bare hull! The only way to go! You can't be wrong with that!
Hopefully it all comes right...
Cheers for watching 😃
Ribs go across the hull, stringers are longitudinal forms that are laid in line with the keel.
That piece you put in is a rib.
Makes more sense.
😂🤣😅
Cheers for watching 😃
You are both doing so well! Your enthusiasm for the project and willingness to learn new skills as you build is wonderful. Paint the walls white - keeps it bright and easy to touch up if damaged. Keep up the good work and thank you for your videos. 😊
Hi Stu and Marina. I think you are both doing a fantastic job on the floor. Keep up the great work. 👍❤️❤️❤️
Hi. Re making bulkheads and fitting have a look at the Duracell project. He’s very good with glass bulkheads and epoxy. To do the bulkhead templates use a hot glue gun and battens to get the shape from a reference piece. Keep going!
Thanks for the encouragement and advice.
We still have a lot to learn.
Cheers for watching 😃
From the sounds of it you know the answer about the paint 🤣👍
You guys definitely did the right thing doubling the plywood for the stringers.
So much work, you guys are doing great. Looking forward to seeing the stringers matted in.
Very soon!
Just about to check the state of them.
Once the sun is up, I'll get to it.
Cheers for watching 😃
When I have installed interior bulkheads I made templates from strips of thin (3mm), cheap plywood. You cut the strips maybe 4 cm wide and hot glue them together to make up the required shape. Adjust the length of the strips to get a decent fit. Final detailed adjustment is done by sanding the edges of the strips. Once you figure it out the method is very quick and easy. One sheet of the cheap plywood will make quite a few templates since you can break up a template after you use it and reuse the strips.
One point of nomenclature. Stringers go for and aft and floors go athwartships - across the boat. What you put in is a floor that the cabin sole will sit on. Classic boat terminology often doesn't make sense. For example, in your v-berth (forward cabin) the wood strips on the inside of the hull are called Ceiling and what is called ceiling in a house or apartment is called "overhead".
As far as the paint goes, I like what is called Herreshoff style interior which is white/light painted bulkheads with varnished wood trim. That really brightens up the interior.
Mr. Dunn's coment here is right on the money in every respect. For videographic examples of using thin strips and hot glue to make templates, you might check out Aladino's work on Sailing Magic Carpet channel. Aladino is a professional boatwright who is in the midst of a major refit on a Cape George 36. For glassing in floors and stringers also see the Expedition Evans channels early episodes.
I appreciate Mr. Dunn's use of the proper nautical terminology. Another name for the forward cabin is the forecastle (fo'c's'l).
I agree with Mr. Dunn on the paint, as well. If you want to brighten up down below but retain some of the varnished wood finish, the Herreshoff style is the best way to go. Paint the plywood bulkheads but keep the solid wood trim a natural finish.
You two are so scrappy I have the utmost admiration for you. Keep plugging away at this hard work despite the fact that you barely have a pot to piss in. Much respect to your humility and stalwartness.
For me I like to have light and bright.
Please dont forget to leave a drain hole at the base of the stringer/rib so that any water can flow through the bilge!
Thank you for the heads up.
There's a nice gap for the water.
Cheers for watching 😃
hi guys, Stringers and ribs, really what you are fitting are ribs, the Stringers run fore and aft and act a bit like floor joists in a house. To make the templates, you need a glue gun so you can stick pieces of cardboard together, that way you know you have the exact contours of the boat. 😊
Hiya,
I think there will be many examples of me using incorrect terms, please bear with.
Cheers for watching 😃
@@SailingSeabird of course, not a problem, you are doing a great job. For making your templates, take a look at the last video from 'The Duracell Project'
You should replace one stringer at a time for the boat doesn’t loose his shape, even if you thing won’t bend its receiving upper forces from outside stands. Good luck and it will be very useful to watch Math on how to vacuum bag epoxy parts on the sailboat on the channel Duracell project.😊
those Elvis gloves are cool, out the dumpster yeh right probs got them off amdizon😂😋😂
Hi . For your parterns use soft paper on the old structures before you smashed them 😊 . Trace with Pencil, fold, eventualy cut. Animo y suerte !
Yay, strength and success💪🪶💫
I really enjoy your programme love from South Africa.
Youre 2 awesome people
Thank you so much.
Just two people trying to get an old boat working.
Cheers for watching 😃
The white wash looks good on camera
Tbh we thought it looked horrible.
But we tried. . .
Cheers for watching 🙂
Look up ‘joggle sticks’. Made all the bulkheads for Dad’s boat with them
We'll be sure to check the out.
Cheers for watching 😃
I used to paint houses for a living and I always found that just applying a solid finish is easier in the end than any kind of faux finish. The result is also generally more durable, from a practical and taste point of view. Maybe you could just match the off-white that you already have in the boat? Or pick a nice warm white and eventually refinish all the white. You two are doing so well! Hope the weather warms up soon!
Also is you like the graininess of wood make the last strokes with a wide brush to leave long brush strokes in the finish coat. I’ve done it on paneling and like the look. Leave the wood finish on the trim if you want.
Lol bit of a terrifying discovery seeing daylight thru bottom of the boat. Keep up the great work. I look forward forward to your videos every week
If you like the paint that’s all that’s needed. Who cares what others think, it’s your boat. Keep going you are making amazing progress !! ❤
Coat all the surfaces with epoxy to seal the wood then glue together with epoxy. then fiberglass all the stringers to make a solid base. and do this with bulkheads to make a strong and stable boat. you can use this system to do all your cabinets so they are protected from moisture. and you can either paint or stain the epoxy what ever way you desire
A layer of epoxy is a must.
We've covered every exposed surface, hopefully 😅
Cheers for watching 😃
Keep doing the good work. Great vibes from you two.
Thank you! Will do!
Cheers for watching 😃
I love how wonderful relaxed you guys are
Thank you, glad enjoy our videos.
Cheers for watching 😃
Use paint sticks and a hot glue gun, I've done so many templates this way, works perfect and fast. ..
I would forget the white washing and paint the wood a cream or oyster colour. You are doing a fantastic job. Your perseverance has inspired me on my own boat project which so far has taken 3 years. I have also picked up some tips. Thanks.
10 out of 10 for your efforts, just keep thinking of all the beautiful places you can go when finished. No moor rubbing down and filling, just blue sky's and freedom.
Sometimes, the dream seems so distant.
It's hard to comprehend that it's all interlinked.
I try to focus on the job at hand. The rest will all come naturally.
We'll get there and bringing you all with us 😅🤣😂
Cheers for watching 😃
Hi
Nice job, looks strong enough
For the templating have a look at Matt from the Duracell project.he is making templates in almost every episode from small pieces of thin plywood and a glue gun
This seems to be standard.
We'll give it another go. More to do and I'm sure we'll improve our skills.
Cheers for watching 😃
Have you watched Aladino on Sailing Magic carpet , he makes up templates by stapling strips of wood together ?
Looks great! I think what is unique about your channel is the raw honesty of thinking your way through projects. Truly refreshing, you both are diamonds in the rough! Thanks so much for sharing your journey, it's inspiring!
I think a few white walls will brighten up the boat and make it look bigger! I left my comments a couple of times to help with the algorithms! Let us know if this will help!!!
Hi, we had the same probleem in our sailingboat. It was all pretty dark wood in the cabin. We decided to paint part of it a kind of vanIlla kind of white. The result was amazing. The cabin became a lot lighter and brighter and we never regretted the decision to paint. We did a solid color, because we had so many different colours of wood. And now it is just the nice wood and the painted wood.
I love watching your video’s! Keep up the good work!
Thanks for the tips!
Cheers for watching 😃
I would love to do something like this. Thank you for sharing your project with us.
The stringer looks great!
Thank you.
Cheers for watching 😃
I don't know enough about boats to give you advice but I can tell you that I admire your work quite a bit. Keep up your great attitude.
You are an inspiration guys, keep happy and positive...we lookford to launch day with great expectation...perhaps we could come out to see it ?😊
Sounds great!
We are a world away from launching.
Contact us via email, might be better.
Cheers for watching 😃
Cold weather means ... NO MOSQUITOS ! Yeah !
I like the look of the white wash. Will absolutely lighten the inside. Not so gloomy. All in your time. Practice makes perfection.
Couldn't agree more.
Keep playing, you'll soon find a tone and a method that works.
Cheers for watching 😃
Doing a fantastic job, get another multi tool, they are invaluable on a boat, good luck!
Thank you.
Another multi tool is on its way.
Cheers for watching 😃
I hope you sealed that plywood stringer with epoxy before fixing them together, including sealing the cut ends, especially those down on the bilge floor and water passway.
Good work, both of you !!!!
Glued and screws the two pieces together.
Once tabbed in, covered with epoxy.
Will do a final cover before painting.
Cheers for watching 😃
Love the white with wood trim...light and airy and not sooooo old fashioned. From our point of view the stringer looks perfect. 😊🎉 Things are moving along...
Thanks so much!
It's a slow process...
Cheers for watching 😃
Fab work, as always, you two. I see a lot of people are not too fond of your whitewash finish, but it's YOUR boat, and if YOU like it, that's all that matters, honestly. The transverse (athwartships) "stringers" you are replacing are caller "floors". Stringers run fore-and-aft. Good idea to double up the thickness of the floors, they will add strength to Seabird. If you don't already, look at Sampson Boat Co's CZcams channel, they often make templates and you might get ideas from their work restoring an old wooden yacht. You're doing well, good luck and best wishes always!
Thank you so much for your great videos!
I did see other CZcamsrs see using a „Joggle Stick“ to help creating templates. But I don’t know if that might help you in your situation. Have a great week!
Watch the boat Butler he does the same work. He also fully explains what he does. Great work don't beat yourselves up you are doing great.
Thanks for the vote of confidence.
We are very green with what we are doing.
But we're learning and it's fun.
Cheers for watching 😃
i know nothing about boats but love watching you every week so from now on i'll just comment "comment" to help the algorithm ! though is one word enough ?
Happy Holidays! As your taste in decorations I am fine if you are happy. As to the 😢 dust from fiberglass please don’t be casual about the danger to your health. Please remove all the dust as soon as possible. Respiratory track infection is NOT what you want, speaking from experience! All the best. Robin
We are trying with the dust.
It's a total nightmare 😕
Cheers for watching 😃
I would apply some resin on Your "stringers'" playwood before installing.
Just soak it using paint brush, to make it waterproof all around.
Its a bilge, so water will be there at some point.
In case of future delamination or cracking, the ply will be more protected.
Good to do this on every wooden framing in your new floor, cabinets, settees etc
Greetings from Poland!
Great advice.
Cheers for watching 😃
I think they are evil
Knievil gloves? That’s a tester for you younger guys. Definitely getting there.
Those gloves are hilarious.
Great find.
Cheers for watching 😃
I really love the white washing.. . It makes it look more open and clean. As for the stringer.. you can never be too solid. Great work both of you.. looking forward to seeing the inside fished.
Don’t worry too much in getting an exact fit on the shape of your replacement floor. Small gaps filled with epoxy is more than good enough. Some would say that a small gap is better as it prevents hard spots and potentially places that would delaminate in the future.
Thanks for the tips!
That's why we've added the balsa, to prevent hard spots.
Cheers for watching 😃
Good job so far!
Others may have suggested this but here goes anyway:
You can use a cheap pencil compass/ protractor and scribe the edge onto the cardboard with a bit more control than your ruler and felt pen.
Or, make a templet with door skin pieces 1/16" thick, or stiff cardboard and hot glue connected each piece to the next following the bottom contour .
Seal the wood with epoxy prior to joining them esp. the bottom side
Great tip!
The compass sounds like a good idea.
Tomorrow, we are on another floor brace/stringer.
Cheers for watching 😃
I've got a nice finish before using liming wax, which is a white wax. It will go into the grain. Gives a kind of washed-out driftwood kind of look. You can use a brass wire brush to pull out some of the grain beforehand to make the look more pronounced.
Great tip.
We'll search for this wax, Thanks.
Cheers for watching 😃
Always enjoy your updates.
Glad to hear it.
Slowly, slowly, we try to make progress.
Cheers for watching 😃
You both are gems... Keep loving each other, and loving up on that boat. Cheers.
Thanks so much! We’ll try! 😊💪🏼
Can't beat free gloves!!
There are special multitool blades for cutting the GRP. You can use a dust shroud in order to supress the dust when using the angle grinder
Love the way you introduce and close each episode so welcoming and kind so many utubers become single minded and over the top and false you keep it real as always love the fact you give everything a good bash 💯 percent this is why your Chanel is succeeding 😊
Thank you so much!
We are just being ourselves.
No airs or graces...
Cheers for watching 😃
The way you start you videos talking to us all on a personal level is really what make me feelnim part of your journey, love ya heaps, greeting from Australia
Jim
Make the tabs extra wide, both on the floor and up the marine ply. 💪
I have an opinion on your walls. If you like it,I love it for you.
You guys are gonna have a top notch vessel.
You two are an inspiration to us all. You work well together and I love the can do attitude. My humble NZ opinions. Hi-gloss walls will brighten the spaces and be easier to wipe clean. Cardboard templates always worked for me. Check that the cradle pads do not distort the hull inwards when the old frames are cut out. Once the new frames are glued in, Thats the shape of the hull. When glueing in the new frames, brush all the edges with unthickened resin to seal them before the thick glue is applied. Plywood will wick up water very quickly especially in the bilge area.
Thanks for all the advice.
We've covered the exposed areas of the wood.
We are still working on a white shade we prefer...
Slowly Slowly 🐌
Cheers for watching 😃
Keep up the great work. Can't wait to see the next video!
I really like the blue & white combination in your temporary “home” boat. Seems bright and homey to me.😊
I know you were disappointed with not making more progress but as Stu said early in the video, one step at a time! Keep up the great work and I can't wait till next week!!
That blue and white paint on your new boat is stunning and very relaxing to look at ❤
I hate to mention another channel,but Spear It Animal did their floor stringers flooring and galley and salon turned out really well. Thanks for your hard work and dedication to put out a fantastic product!
I love the way you tested the heights of your tower!!! Too funny!
Wow Stu, I love your gloves! A bit of Evil Knevel 🙂
cheap doorskin 8mm or less wood you cut into strips and use a hot gle gun to put them together. then you cut triamgles of doorskin and glue them to the strips where the point touches the hull. connect the dots. sand the paint and stain or varnish, wood is warm not dark.use cushions for color.
well, I watched sanding, sanding, and sanding; so I did some chores and took a nap. Hoping you feel that sense of accomplishment that I feel. The wife says "thanks".I guess for shaming me into doing stuff. haha. I commented!!
If you are going to glass over the stringer, round of the edges. I painted my bulkheads in the 90,s and never regrated it as maintenance was easy and it did lighten up the boat and accentuated the wood trim
Good point.
A lighter interior would be great.
Cheers for watching 😃
Use thin furring strips (like paint stir sticks) and a hot glue gun for creating templates.
Great tip.
Cheers for watching 😃
You are replacing frames, stringers go fore to aft. You are getting on with it and doing well. I enjoy the show.
Great job you two, well done....love watching your progress ❤
Thanks so much! 😊
Cheers for watching 😃
Looking forward to seeing what you're doing this week.
Too strong is better , than not strong enough!
That’s what we thought 😅
Sailing wave rover shows you how to make templates on his channel. Basically put them together bit by bit with a hot glue gun.
Many people have suggested this process.
We have more to do, so I'm sure our templating skills improve.
Cheers for watching 😃
Stuart is a lucky guy.
Try using a mains electric multi-tool. More powerful and worth it for the inconvenience of the cable.
We don't have one.
They are great tools.
Cheers for watching 🙂
You Guys are doing a great job ,,, Concerning the color you are going for on the wall ,,, well ,, I am partial to the natural wood color , but that is just me ,, I say , go with what you like .. I have seen some people using small pieces of thin wood and gluing them together to make a pattern . You might try that the next time ,, just a hot glue gun and small pieces of thin wood ... Take care and look forward to the next episode :)
Seal it enough so that you can clean it easily. It will be much easier to wipe down the walls.
Sanding paradise !
The joys...
Cheers for watching 😃