whats up youtube...heres a clip of me getting some the stuff on the truck..enjoy comment thanks for watching...was it an upgradeđ or down gradeđ....
Yo g! You should do a front bumper removal! Im gonna be replacing my front grill and headlights like you did i want to get rid of this rusty ol chrome bumper too
Looking good bro. Keep it going and keep the upgrades coming. I'm working on a '96 Silverado 1 ton dually. Just had the engine rebuilt. Waiting on euro lights to come from CarID.
NEVER use auto car washes. They have acid wheel cleaner that will kill your clear coat. I wish you could come to our car show this October in Iowa but your probably down in California. The best part about the 90's Silverado/Sierra CK1500 series is that it's all bolt on. Highly unsafe but super simple. And your "Nut Things" are actually called "Speed Nuts" AKA "Self Clearing Nuts". Whatever you do, don't over tighten your parking lights. They're renown for snapping the side plastic off.
When I put mine in...I didn't notice that at the bottom of the headlights there's a sticker that cover a hole. You have to remove the sticker so that when it rains..the water will run out of the hole. They don't tell you that in the directions.
Looks awesome bro, love the new grille and the headlights look like the twin 88-89 ones which were the best looking. I was thinking of getting one of those steering wheels but in black, does it have the same offset/backspacing as the factory wheel? Love your truck bro
Hey man just a quick question. I bought a grille from Summit Racing and when i was installing it, the holes on it for the corner signal lights and reflectors were too far apart. Did they give me a wrong year grille? Mine is a 93. Appreciate it. Badass truck too!
I did not know that the parking lights have those little rubber inserts on the side for the screws to go into and that the screws go in at an angle since they do not lineup 100% therefore I accidentally over tighten one and cracked one of the parking lights right where the screw bolts down on one of the corners
Love your truck bro, I'm going to start doing videos on mine once I start working on it maybe youll give me a follow. I've got a tip for the corner lights that I'll make a video of. I love the corner lights with clear lens and black housings I've been having on my truck for a few years now but right when I put them on I didnt like the edge all the way around with the clear plastic it just looked cheap but if you pull the corner lights off and mask off the entire front of the lens with tape and the hole and take gloss black Rust-Oleum spray paint and paint the back of the lens edge that is clear so that rocks cant chip the paint its makes that edge gloss black from the front view and looks FUCKIN DOPE bro no more cheap clear plastic look Ive had mine for almost 3 years still looks perfect and you will never look at anyones corner lights the same because you get the gloss black edge with clear lens where the bulb is but it has the back housing so it just looks all together black but nice. đ
Wow bro...dam well that seems good ..il give a follow fosure..and yea post it when you do it so i can learn how to....and 100% bro about them looking cheap ...dude that was the reason why ive never added them on my obs because they look cheap but this time i was like whatever...but your idea seems to help so after you post a video later on il try it fosure because i dnt like that cheap look ..i want it to look like stock quality not cheap
I did too..I ordered a set of the LED park lights, and they are not direct bolt on. It's like something is missing. You got the wire with the white connect. Then it plugs into what seems like a ballast. But there's nothing to get power to the lights from the truck. đ€Šââïžđ€·ââïž
209StreetDriven thank you so much and I just wanna tell you that your work kinda has sparked a greater interest for me on my 99 Tahoe keep up the good work
Great question. I wanna know too. I'm rebuilding a '96 1 ton. Waiting on euro headlights and turn signals from CarID. Thinking about painting the grill white to match the body.
Thereâs no other better feelings than getting more car parts. Feels like Christmas. Your build is getting đ„
Yes sir...you know
Where can I find those spacers for these lights
Links to the parts from Amazon?
Yo g! You should do a front bumper removal! Im gonna be replacing my front grill and headlights like you did i want to get rid of this rusty ol chrome bumper too
I kind of did but I know i didnât go into depth..
That looks a million times better!!đđ
Looks great my OBS brother. The grill and headlights are the biggest improvement you can make. Good video.
Looking good bro. Keep it going and keep the upgrades coming. I'm working on a '96 Silverado 1 ton dually. Just had the engine rebuilt. Waiting on euro lights to come from CarID.
Looks good man big difference đ€đ»
Awesome truck I love watching you videos. By any chance in the future would you do a cinamatic video with your truck ? Cause if so that would be sick.
Thanks bro...Hell yea bro that would be sick...i can see it already
I just joined your channel. I'm working on a 94 Silverado 1/2 ton 2 wheel drive. Getting ready to put a tuned port 350 in it, with a 700R4.
Nice đ good job
Looks clean vato,
You should paint the front and rear bumpers black and see how it looks I feel it would cleaner
bad ass truck my boy doing mine the same
Looks awesome man
Thanks bro
that's clean af bro
Looks really good bro
Thanks
Looks sick đ€đ»đ€đ»đđ»đ
looks clean
Sick man Iâm starting an obs buildsone of the first mods Iâm doing is the grill I love the red outlined bow tie
Nice man ..yep it looks pretty clean đ
NEVER use auto car washes. They have acid wheel cleaner that will kill your clear coat. I wish you could come to our car show this October in Iowa but your probably down in California. The best part about the 90's Silverado/Sierra CK1500 series is that it's all bolt on. Highly unsafe but super simple. And your "Nut Things" are actually called "Speed Nuts" AKA "Self Clearing Nuts".
Whatever you do, don't over tighten your parking lights. They're renown for snapping the side plastic off.
I know bro in cali..and thanks learned something new...speed nuts đ and yes i did that the the previous ones i installed a while back..
When I put mine in...I didn't notice that at the bottom of the headlights there's a sticker that cover a hole. You have to remove the sticker so that when it rains..the water will run out of the hole. They don't tell you that in the directions.
Really bro...thanks il give it a look
Una chulada como siempre đđđČđœ
Gracias đđ
New grille an lights look good
Thanks bro
Weâre did you get the bow tie? Red outline? Itâs the 454 model.
Yes it is ..and i bought it off lmc.com...or even just typing 454 ss emblem on google it will show up
It's nuts how much a little emblem like that is, $70-$80 CAD
@@ryantoews3886
Thats peanuts compared to what new things cost for new vehicles đ€Šââïž
Everyone watching and asking where you get the grill and lights from? It says it in the video title AMAZON ...đ€Łđ€Ł
đ€«đ
Nice
Looks awesome bro, love the new grille and the headlights look like the twin 88-89 ones which were the best looking. I was thinking of getting one of those steering wheels but in black, does it have the same offset/backspacing as the factory wheel? Love your truck bro
I think so bro im not sure they seem like they do
Hey man just a quick question. I bought a grille from Summit Racing and when i was installing it, the holes on it for the corner signal lights and reflectors were too far apart. Did they give me a wrong year grille? Mine is a 93. Appreciate it. Badass truck too!
Hey bro did you ever fix it ?? I have the same problem
Maybe you need to flip each lense around to see if they would work in the hole
mine has the same problems I think maybe get the 454 year I am gonna try this out ?
I did not know that the parking lights have those little rubber inserts on the side for the screws to go into and that the screws go in at an angle since they do not lineup 100% therefore I accidentally over tighten one and cracked one of the parking lights right where the screw bolts down on one of the corners
Bro i knowni almost did that..i was like crazy looking for them ..until i looked it up đ€Ł
209StreetDriven do you guys know where to get those inserts?
@@ezequielsanchez3617 when you replace your headlights usually you just pull them off of the old OEM pair and put them on the new ones
Big dan I didnât have them with my old one so Iâm wondering where I can find them
@@ezequielsanchez3617 junk yard
Looks badass bro đđđđ
Thanks brođ
Did a great job buddy!!how much for the bowtie?
Where could I get them bottom clips for the headlights?
Love your truck bro, I'm going to start doing videos on mine once I start working on it maybe youll give me a follow. I've got a tip for the corner lights that I'll make a video of. I love the corner lights with clear lens and black housings I've been having on my truck for a few years now but right when I put them on I didnt like the edge all the way around with the clear plastic it just looked cheap but if you pull the corner lights off and mask off the entire front of the lens with tape and the hole and take gloss black Rust-Oleum spray paint and paint the back of the lens edge that is clear so that rocks cant chip the paint its makes that edge gloss black from the front view and looks FUCKIN DOPE bro no more cheap clear plastic look Ive had mine for almost 3 years still looks perfect and you will never look at anyones corner lights the same because you get the gloss black edge with clear lens where the bulb is but it has the back housing so it just looks all together black but nice. đ
Wow bro...dam well that seems good ..il give a follow fosure..and yea post it when you do it so i can learn how to....and 100% bro about them looking cheap ...dude that was the reason why ive never added them on my obs because they look cheap but this time i was like whatever...but your idea seems to help so after you post a video later on il try it fosure because i dnt like that cheap look ..i want it to look like stock quality not cheap
@@arturoochoa8 it looks so much better and blacked out so its freshđ
Nice bro thanksđ
What brand parts do you have on your drop?
Make that video
Clean my boy
Thanks bro appreciate it
Hey bro whatâs that part called at 6:16 need it for my conversion?
I bought new headlights for my obs but the corner lights donât fit my 454 ss grille
Same here those lights are from 94-98 u have to get a 94-98 grille
Where my takuaches at?
Cuuuuh
How did u install the grill lights
@209street driven Looks good, I have the LED headlights myself. Where did you get the red bow tie from??
You got a link to the bowtie and grille?
Where you get the red Chevrolet logo for the grill?
Where did you get that grill? I have only found them matt black.
On amazon bro
You got a link to the bottom and corner lights?
What do the filler screws look like
Where did you get the side markers?
Hello. The grill n light look bad ass. Where did u get the grill? I need a black one and I can't fine any nice ones. Is the grill metal or plastic?
Muy chingon tu proyecto amigo !!!!đ.. una pregunta que modelo de rines tine tu camioneta ??
Gracias đđ ...son basset d ring 15x8
Big upgrade cant wait for u to get the dip and mirrors on it
Yes sir i got the mirrors today toođđ ..soon upload
What size and offset wheels are you using? They look good.
whats ur wheel setup backspace etc
Yoo u skipped the one part i need which was how to wire up the new lights
Looks real nice đ where can I get this set up ?
Amazon bro
How much did the grill, and lights cost?
Came here to see how you do the wires for the bottom lights and its skipped đ
What do you meanđ...i just unplugged everything from the old lights and plugged everything on the new headlights
I did too..I ordered a set of the LED park lights, and they are not direct bolt on. It's like something is missing. You got the wire with the white connect. Then it plugs into what seems like a ballast. But there's nothing to get power to the lights from the truck. đ€Šââïžđ€·ââïž
He bro when u bought all the front grill and light was it from 88-93
Does the black inside the housing limit the brightness???
No sir they are nice and bright ..
Waddup player whatâs the part you use to clip on or screw the bumper filler to the grille. I just got the same grille with no parts.
Was the emblem a direct fit or did a need some clips to hold it in place?
Ayy where can I get the same drop as yours and how much did you spend in total for the drop
I got it done at stockton ca ...1350 a 5/7 cnotch beltech drop
You had the turn signals upside down.
How do you know?
Where can a purchase those bottom light "clips" 6:15
Junkyard bro ..go take them off ..đ
My bottom lights donât fit my grill
I have the same problem with mine if you dont have those black clips he has they wont line up
6:15
Weâre did you get the corner lights please let me know
I got them off the existing grill
Link to lights please
I have that same grille emblem what retains it to the grille on the inside?
Where U get the parking lights screw spacers ?
Weâre did u get the headlights
Amazon bro
I ordered the chevy emblem but didnt fit the grill it falls off what did you do to make it fit
Did you have to take the bed off the truck for C-NOTCH?
I actually got it done at a shop i didnt do it my self
@@arturoochoa8 awww man well thanks for the reply the truck looks great man!!!!
@@lexthelonewolf1864 u dont have to take the bed off but it would be easier
Thanks
Hey bro!!! I like what you did to your truck. Will that grille fit a 94 chevy silverado?? If so where can I get that one at???
It will
Yuhh where you get those side amber replacements?
I used the stock trucks
What size were the nuts on the side markers?
What kind of bulbs did u put bro? 8k hidâs?
So how did you keep the bow tie on
Where did you get the grill and headlight feom
Off Amazon..
@Gabriel O'Campo VIPMOTOZ For 1988-1993 Chevy C/K 1500 2500 3500 Pickup Suburban Blazer Headlights - Matte Black Housing, Driver and Passenger Side www.amazon.com/dp/B0743YVYV7/ref=cm_sw_r_cp_apa_i_FeJnDbZVQM862
link for the headlight housing??
Whats the wheel set up?
What kind of exhaust are you running?
What kind of drop do you have on your truck
Where did u buy the rims bro
I got them on Craigslist but you can find them on summit racing
Hey man whatâs the link for the lights they lookin sick
Check this out at Amazon.com
VIPMOTOZ For 1988-1993 Chevy C/K... www.amazon.com/dp/B0743YVYV7?ref=ppx_pop_mob_ap_share
209StreetDriven thank you so much and I just wanna tell you that your work kinda has sparked a greater interest for me on my 99 Tahoe keep up the good work
Thanks bro appreciate it....great to hear bet that tahoe will look badass
Cuanto esta tumbada y que Tamayo d llantas le tines Puestas?
I would Actually like to do a grill swap on my 98 and put a 93 grill would it be difficult
It shouldnt...it should be fit on ..one of my buddies did it
can this grill fit a 1996 silverado?
Great question. I wanna know too. I'm rebuilding a '96 1 ton. Waiting on euro headlights and turn signals from CarID. Thinking about painting the grill white to match the body.
Yes bro it should fit right in ..i have buddies that have done the swap
Is there a way to put that same grille on a 92â GMC Sierra?
Yes i do believe you just have to switch it
Have a link of this Ătem???
How much was the grill
Where could I get those headlight clips to screw them in
I got the clips off the old one and the light on amazon but i saw them discontinued
Will it fix a 99 ?
I thinkso bro ive seen people swap it
Im not sure if they had trouble but they have
where did you get it bro
Everything off amazon bro
I just bought the same set up but the bottom lights done fit in the grill.....??
Really? Hmm...mine did ok but maybe defected or something?
@@arturoochoa8 i dont have the black plastic inserts did your light line up without them
Did you ever find them ??
I got the same problem
is that a facelift??
Where did you get those clips at to install your parking lights?
I took them off the old ones they just screw off
@209StreetDriven do you know the name of them?
Where did you get your headlights and grill at?
From amazon VIPMOTOZ For 1988-1993 Chevy C/K 1500 2500 3500 Pickup Suburban Blazer Headlights - Matte Black Housing, Driver and Passenger Side www.amazon.com/dp/B0743YVYV7/ref=cm_sw_r_cp_apa_i_Aa4wDbA896QS2
Chevrolet Pickup Truck Headlight - OEM Style Grille Argent Composite Headlamp www.amazon.com/dp/B005FLZCS4/ref=cm_sw_r_cp_apa_i_ga4wDbR5AGREV
where the wheels from
Where are the links?
whats all done to the engine
3702 edelbrock plus cam, edelbrock intake manifold, jba shortiee, trickflow heads and thats pretty much it a intake and throttle body spacer
where did u get that hood from?
Summit racing bro
Where in Stockton did you get your drop
Norcal muffler off pacific next to chuckie cheese
Was it expensive?
Where did you get your hood?
Summit racing bro
Thanks