Easiest way to clean radiator + benchmark cpu temps
Vložit
- čas přidán 5. 09. 2024
- Wowstick 1F+
www.amazon.com...
easiest way to clean a pc aio radiator without removing from cpu
also did a before and after benchmark on the cpu temps
this radiator has not been cleaned in a year so it was very long over due and the results show!
1600 dpi 3.0 in game 1.78 monitor coefficient
Logitech G Pro wireless
pc specs
ryzen 7 5800x
MSI 3080 Gaming Trio Z
trident royal z 4x8gb 3600 c16
nzxt 360 aio
cooler master case
b550 msi
JHensley13 beats
/ @jhensley5008
Logitech G Pro wireless mouse/headset
sony a5100 camera
logitech webcam for KBAM
#pccleaning #dirtypc #benchmark
I just use a small blower. Same ones that are used for car engines/leaf blowing.
Works pretty well.
I take my cpu outside and use the blower on it directly and it cleans the entire thing. Been doing it since 2019 and haven’t faced a single problem.
Big tip, if you're gonna clean anything with water, always use distilled water. Contaminants in tap water or even purified water could lead to erosion. Even worse if used on electronics as certain contaminants are conductive and can hold a charge. Obviously using it on a heat sink and fans should be safe but something to keep in mind. If you don't trust water, use 97%+ Isopropyl Alcohol.
Hi! In near future I am going to clean my aio but distilled water is not easy to get in my city, are you sure 99% Isopropyl will not damage my aio or something? (ofc i will use very very small about of it and be careful)
thanks for this video its been extremally helpful. when searching for a way to clean all i kept getting was how to flush the pump, aio placement, or fully removing the system for cleaning, i wasnt sure if i could keep the system intact like this or not.
Awesome!! I appreciate it!
Dude, this is an amazing "how to" video. Not only do I know how to do it without taking the AIO out, but I realized mine is not all that bad 😅. I can hold off for a while if yours was running with that gunk after a year.
You'll often find that dust only really hurts your temps by 3C most of the time. If it's gotten to the point where your temps are becoming unfathomably terrible or you're running into actual overheating issues.. then that's your cheapest "repair" to your problem.
Def an effective way of cleaning the rad without making a mess lol
thx bro. had mine for 2 years im gnna do this in a few days. just wanted to see someone else do it.
How dirty was it and did it improve performance?
Yeah that's a super safe way to do it I take my pc outside put it in the car and hang the radiator out the window so I can pressure wash it 😉
Hahahaha 😂 hell yea clean is clean
how do you not destroy the grille in there with a pressurewasher haha. I handle rads at work all the time and if u pick it up the wrong way you're damaging the grille
Takes a tooth pick and makes them straight only takes about 4 business days lol
@samh7805 I don't set the pressure to" remove paint" lmao I set it the lowest setting
Dang I was hoping at least 1,000 lbs of pressure be a good video at least once lol
You are the Goat! Thank you! Sun from me.
Thank you i appreciate that!!
Looking for how to clean the radiator. Found a perfect one ❤️
Clean with simple water !
What if i wanna clean it with complicated water?
i have mine at exhaust i dont expect to need to clean it that much since the air will alr be filtered from the front filter but in case i decide to do this one day its good to know
Which air compressor gun are u using bro?
do i still have to clean the black pump or water tubes? or just the radiator
I am just still confused on how to take the radiator out
What case is yours in? Usually which ever end your fans are on the radiator screws will be on the opposite side. So my lian li case I take off the back door on the case and then the screws will be accessible
@@RyderTech Yep thanks my uncle helped me get them out, but ill remember this for when I have to do it myself
Can having a dirty aio cause bad Temps? Like 90+ c°?
It can but 90+ there is probably more than just dirty maybe it’s not seating down all the way on the cpu maybe the fan direction is not optimal maybe not enough thermal paste maybe over time it’s lost some water inside so it’s not cooling that well
West Virginia cooooool 🫡
Dyson the world😆
Which compressor gun are u using bro?