Trumpeter 1/200 R.M.S TITANIC (
Vložit
- čas přidán 12. 11. 2020
- Join eModels video team member Ted as he builds Tumpeter's 1/200 scale R.M.S Titanic. In this episode he prepares and paints the hull.
Get this kit for yourself and build along: www.emodels.co.uk/trumpeter-1...
Remember to visit eModels.co.uk, the UK's number one retailer for all your modelmaking needs! www.emodels.co.uk
Join us on Facebook: / emodelsltd - Jak na to + styl
Good to see you building models again Ted....Matt from Australia 👍
Ted top job there really superb paint job stay safe 👍👍
Well done Ted, I like the reflective foil idea! The shear line is a real pain being where it is and I have been thinking about making my own decals to get that nice and crisp. Glad to see that you are on the case with this kit now! Regards JH :-)
Great work.
Hello. Excellent video Lots of useful tips Regards Mark
Bit of advice. If lighting the hull do not use bright white LEDs. Use a dull white, somewhere between creamed yellow. That way it will look more authentic to the scale and Titanic's lighting in 1912. (I would bin the kits lighting system). Also, this is crucial - do NOT put the deck mounted LEDs on the deckhouses that are used to light up the funnels. Titanic and her sisters never had such features as ships funnel lighting did not come into use until the mid 1920s.
I tried to use the funnel lights to light the inside of the hull, but wasn’t very successful, I’m looking for an alternative
Well done Ted, I was starting to wonder when the third video was going to show up. I figured that since the kit is so large you were building an extension to your hobby room! Looking forward to the next video.
Fun video. I'm somehow relieved that your 'not' doing the photo etch, or enhanced decking. It will be nice to see it as it is from the box. Are you planning on doing the rigging lines? I do find it odd that such an expensive kit doesn't ship with them. It will be interesting to see what you come up with for those if you're planning on doing them.
Hi can I use a 12v phone battery LED lights as I've put the 5v light in with the 1/200 trumpeter Titanic kit and put some 12v lights in but not stuck the 2 top decks in yet
Nicely done Ted. When painting the hull why not use the natural lines to mask off the area to be protected. It seems the pencil line is a bit of an over kill?
What did you use for the red antifouling paint?
Did you use primer before painting the antifouling?
As the historian who assisted with Trumpeter on this kit I can honestly say that Trumpeter's paint guide/colour chart is off. Long story, not going to even go into it.
since there were no colour photos of Titanic, only white star flyers/ posters how do you know where the colour scheme is wrong.?
Slap it on
Plus beau que le Revell...A+
You should definitely add 1:200 scale people to the ship.
Ted can you please help. I have painted the Titanic in matt. Can I put matt Varnish on before the decol. Regards Brian
Just to be certain put a gloss coat on just in the areas the decals, then overspray them matt to match the rest of the model
I wish you could film in higher definition. What is your estimate of total hours into the project so far?
It is filmed in HD CZcams will send it to your settings for your device ( you can change them) . As for hours.. just a rough guess 50 hours
Did you clear coat the hull ?
How is your Hull ?
My Hull is warped really bad had to by correction kit bulkheads , not very impressed with Trumpeter on this one
Greetings from Perth Australia 🇦🇺
Fortunately I didn’t have any problems with the hull. However I ave ears other have had the same warping that you experienced. Hopefully your all sorted now
someone make the TINtanic!
Part 3? 4? come out of the anaesthetic Ted and get on with it