Bonding 3D Printed Carbon Fiber Panels | The Legacy (18)
Vložit
- čas přidán 7. 11. 2023
- Today the team shows you how to bond and install the 3D-printed carbon fiber parts onto the electric converted 240z datsun. We also show you how to flat-clear coat your parts for the ultimate protection against scratches and sunlight damage. Hope you enjoy hanging out, hit that like button if you enjoyed it!
➢ Follow us on Instagram:
• Makehastecorp: / makehastecorp
• Ash Thorp: / ashthorp
• Colorsponge: / colorsponge
• Street Bandito: / streetbandito_
• Industry Garage: / industrygarage
#SEMA2023 #CarbonFiber - Auta a dopravní prostředky
It looks so crazy when the clear coat reveals the carbon weave!! This car is so sick!!
appreciate it 🖤
Congratulations to making it to SEMA!!!
All around excellence! Camera capture...story...right level of explanation...creativity...no artificial drama...thinking...execution...project direction...Keep doing this type of work!
Especially the "no drama" part. Far too many channels press that well beyond the limit...
Can you please produce super high resolution and quality posters of this amazing build that we can buy and frame? Maybe some design concept pics, some different angles in a nice, futuristic ish setting or something. Love that design, build and quality of work and videos ❤
once we get it driving proper this shall be done
Letss gooooo!
i’m about to send you a video on how i read this lol
This is such an epic build. I've done composite buck, mold, and final parts work in my past and know how much effing work this has been for you. Plus, as an ex-Datsun Z builder (1970s) its great to see what you have done with the beautiful chassis.
I was scared we weren't gonna get this video, bless you
always. SEMA just took a lot of manpower from everyone but now that we are back time to get back in routine.
@@StreetBandito Well keep up the good work, this build is so sick!
Standing ovation for everyone who made this car a reality !
Thank you for sharing these epic construction moments, I hope you had a lot of fun with this project !!
I really can't wait to see the next episode 🤩
No words, just wow! Thanks for sharing all the details, drooling over here....
Can i just take a second to appreciate xaviers amazing editting boy aint got knees but damn he do some magic with them fingers boy pause hol up
lmaooooooooo legit dying. appreciate it 🙏🏽
@@StreetBandito ily
Music is FIRE!!! Great job Tim and Dad's back lets go!!!
Ffffffffuuuuuuucccccckkkkkkk! When that first coat of clear went on, and the carbon showed through, my jaw dropped! What a sick build! Not a huge fan of electric cars, but this is REALLY GNARLY! Congrats boys! GREAT WORK!
Found this channel randomly and I'm in love with all of this, super inspired and really want to dive in and learn everything.
I know its "done", Ive seen the SEMA photos...and yet Im sitting here waiting for the next video already haha
haha ayee glad we still have the community buzz. glad to be back.
@StreetBandito I'm not even into EVs and 240s/280s. I just dig quality work, carbon and vintage wide body race cars haha
Thank you for the great content! Congratulations on making it to SEMA! It was really awesome to get a chance to meet the team and get my hat signed!
Funny to watch this when I already saw the car at SEMA on a SA video! Well done!
This might be the most beautiful car I've ever seen. Incredible work!
I saw this car at the SEMA show got to admit , the work you did was just draw dropping , loved the work that went into this and craftsmanship
Man, this looks so tight; stoked to get the details on stuff like the rear taillight (Transparent 3D printed SLA? I want the details!), all the gaps from all the angles, interior, and definitely keen to see this thing drive ❤ Such a quality build!!
Goated build right here
Just wanted go say that im feeling the tech/house music from this build series
BANDITOS ASSSSEEEEEMMMBBBBBBLLLEEEEEEE WE MADE It to SEMA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
yeaaaa boy round yo the rest of the crew for the post sema party!
I love the level of detail u show in this series. It almost feels like a bunch of tutorials. Amazing craftmenship
Happy sema boys! Ya’ll did fuckin great, looked absolutely fantastic
Thanks for scratching my carbon itch once again! The Z is looking Awesome!
man, i learn so much just off of following this build! you guys kill it with every video!
this car is proof that EVs can be actually cool.
I have been loving this series!! Great work car looks amazing
Great work! So awesome. Congrats on making in the battle of the builders. Can't wait for more episodes
Tatt made the video 😂 Greg keeping it real with the donimos.
Amazing job as always! Also good to see Greg again
Such an insane amount of work. Props 👏
The management and plumbing is going to be something else what a job, this thing is incredible I’m stoked for the next vid
Blown away how good it looks!
just amazing work!!.
Wow, been waiting on this video for quiet sometime now, please guys can we start going in-depth videos of how you make the panels, it looks amazing 🤩 WELL DONE 👍
Incredible workmanship, and phenomenal documentation of the build!! Great work guys, especially in such a ridiculously short timeframe.
Love the dubtechno you’ve been using for the vids recently!
8:09 X sounded like some Renegade Angel.
love how consistent your posting guys
SQUAAAAAAAAD!!!!!
you know what time it is!!! round up the gang.
@@StreetBandito *Bird 👐 Call* 📢 "Cuh-Caawww Mudasakas!!!"
Nice work, guys!
Who’s to thank for the good tunes?
Love the carbon, love the music.
Totally! Best music of any car build channel by a long shot
lol glad you enjoy 🤙🏽
All the thumbs up for not rushing out episodes and instead making a proper introduction of things you've done. I would have liked to see a bit more of the little stuff that went on off-camera but that's ok! Though some quick update clips wouldn't have hurt. Something like just a few minute raw-cut shuffle. I was a bit worried, but saw the community post after looking for it.
Cannot overstate what an amazing job you all have done. Wish you could come to Japan and help me with a carbon roof and rear quarters on my S15.
Absolutely awesome work as always. Now that I see how you can sand down the gelcoat a bit to improve the surface before putting down clear, I will have to add this to my carbon part making process. Any recommendations on UV resistant gelcoat?
Looks amazing. Well done mate 👍🏻
appreciate it 🤙🏽
Fantastic 🤙🏽
Y'all killed it man! Congrats on making sema with this beauty. 👍🏻😎
Can't wait to see what's next. Maybe an update on the crazy f1 ev swapped Ford? 😀
Bandito type shit 🔥🔥🔥🔥💪🏿💪🏿💪🏿
We know will with the knees and x with no knees and now we got tim with the knee
Music selection on point as usual.
my favorite drinking game: drink when you hear anything about stabilized carbon fiber or v weaves. lets goooooooooooooooooooooooo
The coolest shit on the internet!
Awesome.
Great build! Please cover how you build and finish the tail light. 🙏🏻
you guys are moving so fast in this project
I like this project so much more than the Gas Monkey Testa. Keep up the great content.
Oh snap we got some dawgs on the channel
diamond dogs unite
There's just something about watching spraying POV that's so relaxing
i understand how you feel lol. anytime i can ill try my best to capture that 🫡
IceJJFish kinda build hell yeah
more power
yesssss
Yeeees!!!!
SUPPPPPPPPPPER
Love the music on this vid. What's the playlist?? Please 🙏
X you upped the musak game in time BONDING TIME... sweet
haha thank you!
Are you guys thinking of doing any 280ZX S130 parts now that S30s are getting expensive? S130s are gonna need body panel replacements as they get older and some carbon replacements could be awesome (and any weight savings is a good idea on that chassis)
Awesome build, the rivnut for a sway bar mount is a little concerning though.
What wash and wipe do you recommend for fiber glass/carbon?
We already know you made it to Sema because it's already over and we saw it there
Have you thought of doing forged carbon fiver project? Or is it to complicated . Great job i know you don't show the real work, cause this stuff is a lot of work and takes endless amount of time.
Congratulations !!! Can I know the brand and type of GLUE used in this project? Thanks
🔥🔥🎉
less gooooo
It looks absolutely amazing, although I am still a little bit confused about the headlight situation. I understand the aesthetic choice for minimalism but are they not a compliance requirement for street legality ( this was probably addressed already but I have been watching this in the background of other things so apologies if I missed it)
🎉yay 🎉
First because 3d printed things
welcome to the future
All hands on deck
The clear makes it look like you’re painting the carbon effect on😂
🤭
I would like to know the dual component glue used for this project...
👍🏼👍🏼
What bonding epoxy do you use?
Ya'll better have won ev sport car of show at least :P IF not best JDM CONCEPT.... !
Amazing car, but I hope you later find a different solution then a rivnut to mount the front sway bar. I'd be concerned the rivnuts will fail due to the stress on the sway bar.
I was thinking the same thing...
Do you know what software was used for the design?
💪👍👍👍
IceJJFish is the GOAT
lmao classic
Where is 50 Tyson from? That's an enigma that's plagued the internet for years.
Guys, I lost my knees
glad you came around and embraced the name lmao
Stabilized carbon? Anybody?
Who needs stabilized carbon when you can just do a v-weave? Some people, seriously
got to do 10 pushups everytime it’s said lol
Greg says donimos right 🤌🤌🤌
DONIMOOEEEEEES
He drinks Bud Light
Dude ask your dad if he knows of or remembers AJ's Z-Shop in Savannah Ga?
It feels amazing to have seen this build from start to finish, but you guys must be elated! Great job, looking forward to see a detailed reveal here on YT as well, but take your time :D Take care!
I wants duck trunk for my drunk funk.
okay, so how do I win this?
What no stabilized carbon in this one!?
Z стала похожа с боку на dodge viper мне кажется 😮
@23:44 is that Dylan Mulvaney?