I get the impression he’s done this a few times before. Takes me 3-5 tries to get around the hoods right. He does it in one go and doesn’t even look back.
It takes me about an hour and a half to tape my bars and it still looks rubbish. That Tinkoff guy couldn't just drop in to my garage for five minutes, could he?
I swear that is the same thing I was thinking I thought the video was in a faster rate here at the bar is faster than I was able to unpack the bar tape from its package
I think second guy's girlfriend was send a screenshot with heart notification on top and he ask to his friend what that notification is. Few months ago ı was entered same situation and ask in reddit. İt was scary. By the way after scary three day ı was learn what that is; it was just relationship meter app.
According to Calvin Jones at Park Tools, the wrap on the RH side should be wrapped in a clockwise direction from riders point of view, and counter clockwise on LH side. The Park tools video gives step by step instruction.
I don't think Calvin Jones wraps 10 bikes a day. This is how a PRO mechanic wraps the bar tape for a PRO rider, just stick to the proper tried and true method.
@@poxcr I’ve wrapped mine in both directions and they both work, and look great. The figure of eight isn’t necessary when wrapping like the pros, so probably the preferred method for getting the wrap done quickly.
Yeah on the drops it should be wound the other way as tendency is to pull-down and outside on the drops, which will gradually loosen the wraps 😳, but then if he’s changing the tape on a regular basis it prob doesn’t matter that much.
Really doesn't matter if you wrap inside out or vice-versa: It's a pro bike. With that base wrap, the top layer is going nowhere anytime soon, and it will probably be re-wrapped before the next race.
PROcrastiDRIVE SV fizik tape is garbage, It wraps like shit. Bar tape is one time use, who gives a shit if it rips when you take off. SUPACAZ makes good tape. Not the best but better than fizik. Good cushion, decent stretch and doesn't stay wet like fizik.
lol, I have had literally none of the issues you are talking about with Fizik bar tape. Which specific type are you using? I'm talking about "Fizik superlight classic" bar tape. Also, there are plenty of times where reusing bartape is acceptable. Like when you're just swapping bars or correcting a mistake when you initially wrap the stuff. It helps when it just peels off rather than tear off in chunks :) Never heard of SUPACAZ before... where do you buy it online?
+PROcrastiDRIVE SV Peter Sagan uses supacaz. For the record the wrap issues I mentioned were my own fault lol. I had 3 sets of this tape and ran it for a while. It's more of a smooth sticky feel. I personally prefer textured wraps. I'm running cadence right now. It's Simliar to most fizik wrap I see. They're all good wraps. Just personal preference.
Except he didn't. I mean there's different philosophies, and ultimately its up to the rider, but generally when you come out of the figure 8, the tape is suppose to be wrapping in the direction of the front wheel not back to the saddle. But there's two things to consider....rider preference, and the fact that this tape doesn't even get close to being worn out or stretched before it's replaced.
It's a Supacaz bar tape. I have one (teal) wrapped on My Salsa WarBird handlebar. It's quite attractive (if a bit overpriced), but not as much as some (I prefer Fabric and Lizard Skin). Also, it's extremely fragile: My sticky (a result of washing) gloves peeled of the surface layer in absolutely no time. I do, however, like the look of the metallic purple Supacaz headset cap I have on two of My bikes.
Bicycle sunday I had them in 3,2mm and they couldn't be tightened via allen key (I also lost one end plug in like a week, very poor quality), plus they were NOT COMFORTABLE compared to the originals once I had on Specialized Tarmac Compact... they felt like plastic... rain weather also bad... too expensive... they are HYPED as hell, don't understand the positive reviews
That's expertly done - chapeau! Although I always thought you should wrap from the inside outwards? In other words the opposite way to the way he's just done it?
Andrew Pike Indeed, so that holding the handlebars would actually tend to tighten the tape. Maybe this tape is so good that you don't even need to pay attention to that detail.
wiwh I doubt it's the tape. They probably just wrap it so often with fresh tape that there is no need to worry about the long term wear and tear of it.
The guy at park tool said to wrap the drops in the direction of the force that the wrists tend to rotate, right side clock wise left side counter clock wise when facing in the direction of the front wheel. does Peter Sagan tend to rotate his wrist inwards on the drops?
another pro mechanic that wraps to the inside of the bars, ( several video's on here that do that ). Your hands twist to the outside when in the drops and to the front wheel when the hands are on top. To wrap any other way you are going against the grain so to speak, more of a chance of unraveling. With the modern quality sticky tapes if you do a good tight wrap you probably are not going to unravel no matter which way you go, but correct is correct.
The theory here, especially on a sprinter's bike, is that he's actually pulling on the bars when in the drops. I prefer to wrap this way and I never see my tape or any of my customers' tape come unraveled.
Cody: Yes you may be pulling on the bars when sprinting or out of the saddle but your fingers are still wrapped around the bars from the outside going around to the inside. When you pull or apply pressure your elbows are out and your fingers are tightening to the inside. At least mine seem to be doing this but i admit i'm no expert, as i said if you do a good tight wrap either way it probably will never come unwrapped.
Another reason I wrap this way is that I could never get it just right at the lever clamp when wrapping outside-->in. I'd end up with a lot of bulk at the clamp or have to resort to using the cheater strips. At the end of the day as long as it looks good and stays put, everyone's happy. Cheers.
That is a common misperception in the proper way to wrap bar tape, this video is done correctly. The issue is do you want the tape to tighten or loosen in high stress situations. If you are just riding casually on the drops or the tops of the bar then you are correct that you would be twisting the tape looser not tighter but you are not doing so with enough force to unwrap the tape. However when sprinting hard in the drops you are rocking and pulling the bike side to side and will actually be tightening the tape and same for hard climbing efforts most riders are not leaning on the tops but pulling on the tops again twisting the tape tighter.
A regular mortal will start twisting his hands to the outside when riding on the drops, whereas a pro really twists inside in those hard push moments. Thinking you are a mortal, clockwise on the right side is perfect for you. And for me. :)
Intrigued why he starts at the plug end and finishes on the top. The factory applied tape on my bars goes from the top, self-trapping itself (no electrical tape required) and runs to the bar end plugs where the plugs retain the end.
Because then the leading edge would be on the side closest to you, all the way down the bar. This means that your natural grip will cause the edges to curl up. Fine if you don't ride a lot or you replace it every few months.
That tape is specially made! That’s not what you get in stores. The adhesive is thicker and the tape design is different too. It also seems longer as well. I wish I could buy THIS tape
do you realize that you CAN buy the exact same tape right??? you can get it ordered by any bike shop. heck you can even get it directly from the manufacturer online.
I can't understand people who choose cylindrical cross-section handlebars to ergonomic, aero flat profile ones. The only advantage of the former is that it can accommodate more accessories like mounts, brackets, lights. The latter is much more comfortable, is more aerodynamic and looks better.
@@matteocristini6221 I beg to differ. While carbon ergonomic handlebars are ridiculously expensive, so are carbon cylindrical cross-section ones. Alloy ergonomic handlebars cost about the same as their round cross-section counterparts - €40-70 - not cheap, but somewhat affordable. Check out the Vision TriMax alloy ergo handlebars. Or Pros. Or Zipp ones. As for Sagan, of course, Sagan's sponsors can easily afford to give him the most expensive one there are.
@@LeoInterHyenaem I see your point and respect your opinion, but I mean most people are fine with what comes stock on their bike I guess, or at least I am.
In questo video non è interessante il nastro manubrio di Peter Sagan ma è interessante vedere l'attacco manubrio che usa che è molto strano e particolare fate vedere quello
I get the impression he’s done this a few times before. Takes me 3-5 tries to get around the hoods right. He does it in one go and doesn’t even look back.
😂😂😂 probably 'cause he's got 10 more bikes to do before lunch!
@@joelyons886 The only downside is that it has been turned upside down.
"it's not the engine, it's the driver".... "it's not the handlebar tape, it's the mechanic"
His wrapping skill is faster than my unwrapping skill.
I have to say that, of all his different bikes over the year, this paint scheme was my favorite by far.
Poetry in motion. Top mechanic!
Well said👌🏿
It takes me about an hour and a half to tape my bars and it still looks rubbish. That Tinkoff guy couldn't just drop in to my garage for five minutes, could he?
Well, I supposed it depends upon when you want him to be there and how much money you have!
😂😂😂
I swear that is the same thing I was thinking I thought the video was in a faster rate here at the bar is faster than I was able to unpack the bar tape from its package
This is very satisfying to watch.
1:20 "Dude I guarantee that's Tinder. Tinder for sure."
Matthew Avery he is talking about the bar tape wrap job it's so damn sexy it immediately got 10 matches
unless your an obsessive maniac like me.. then it takes forever while I second guess myself the whole way..
I think second guy's girlfriend was send a screenshot with heart notification on top and he ask to his friend what that notification is.
Few months ago ı was entered same situation and ask in reddit. İt was scary. By the way after scary three day ı was learn what that is; it was just relationship meter app.
@@TayyarePilotuOfficial Good English 👍
😆
this means it will take me 30 mins each side to install my supacaz tonight lol
According to Calvin Jones at Park Tools, the wrap on the RH side should be wrapped in a clockwise direction from riders point of view, and counter clockwise on LH side. The Park tools video gives step by step instruction.
I think I'll Trust this mechanic
I don't think Calvin Jones wraps 10 bikes a day. This is how a PRO mechanic wraps the bar tape for a PRO rider, just stick to the proper tried and true method.
@@poxcr I’ve wrapped mine in both directions and they both work, and look great. The figure of eight isn’t necessary when wrapping like the pros, so probably the preferred method for getting the wrap done quickly.
Yeah on the drops it should be wound the other way as tendency is to pull-down and outside on the drops, which will gradually loosen the wraps 😳, but then if he’s changing the tape on a regular basis it prob doesn’t matter that much.
This mechanic knows what's up: Uses a leather punch for the remote shifter, not scissors.
thechosendude When i saw that, i felt a rush of pure excitement
i almost covfefe'd
LOL
thechosendude d
Did you get a hard-on when he did it?????
Love how he uses the hole puncher for the sprinter switches.
It's nice to watch someone experienced who can do this so fast. It takes me several times as long and I still don't get it as neat. Envy!
Really doesn't matter if you wrap inside out or vice-versa: It's a pro bike. With that base wrap, the top layer is going nowhere anytime soon, and it will probably be re-wrapped before the next race.
Beautiful work !
That was amazing to watch. Very nice work.
That is one beautiful bar tape.
I did this last night with the exact same tape and absolutely bollocksed it up.
Another reason to use Fizik bar tape. Absolutely no issues when reusing it... Doesn't tear, doesn't leave residue, awesome.
PROcrastiDRIVE SV fizik tape is garbage, It wraps like shit. Bar tape is one time use, who gives a shit if it rips when you take off. SUPACAZ makes good tape. Not the best but better than fizik. Good cushion, decent stretch and doesn't stay wet like fizik.
lol, I have had literally none of the issues you are talking about with Fizik bar tape. Which specific type are you using? I'm talking about "Fizik superlight classic" bar tape. Also, there are plenty of times where reusing bartape is acceptable. Like when you're just swapping bars or correcting a mistake when you initially wrap the stuff. It helps when it just peels off rather than tear off in chunks :) Never heard of SUPACAZ before... where do you buy it online?
+PROcrastiDRIVE SV Peter Sagan uses supacaz. For the record the wrap issues I mentioned were my own fault lol. I had 3 sets of this tape and ran it for a while. It's more of a smooth sticky feel. I personally prefer textured wraps. I'm running cadence right now. It's Simliar to most fizik wrap I see. They're all good wraps. Just personal preference.
Hahaha I feel stupid because I just realised the weed theme for that supacaz bar tape. That probably explains why it's sticky
nice to know that I wrap my bars like this guy.
I wish that I had that skill of wrapping bar tape fast and correctly
perfect practice makes perfect - keep watching - keep trying
you just need practice. i have a bike shop and wrap too many everyday. it should not be perfect symetric, just warp it, it is fine.
Except he didn't. I mean there's different philosophies, and ultimately its up to the rider, but generally when you come out of the figure 8, the tape is suppose to be wrapping in the direction of the front wheel not back to the saddle.
But there's two things to consider....rider preference, and the fact that this tape doesn't even get close to being worn out or stretched before it's replaced.
Great video! Thats our neon print Super Sticky Kush Tape
And you too can have it punters, just bend over!
just got your glow tape for my tcr
I just bought mine but im scared shitless to install it!
Bike mechanic with about a $6,000 Tag Heuer Carrera Chronograph. Wow.
Lord Sagan likes it in reverse, I like how he did the bar end start full wrap besides stuffing it in the bar end.
Right side of the handlebar - you (always) do it counterclockwise! (And on the left side - clockwise.)
This is awesome
Why was this so satisfying to watch
the only reason for tinkoff uploading bartape vids repeatedly is bc of how satisfying it looks 😍😍😍
YEP because the way you moved it around when he went around the brake handles is EXACTLY WHAT I NEEDED!!!! or no no that is NOT what I needed!!!
プロの仕事ですね
Perfection at its best
For those unaware, most bikers take up to an hour to do the same task. 🤯
The technique he uses only works with symmetrical bar tape. Any asymmetric tape appears different on upper bar and drop when wrapped like this.
I've been using same handle bar tap until it worn out didn't had enough money
So thx to utube videos
I used my old tire tube and it worked just fine
thank you sir
Good skill. How often do you replace the tape for pro rides?
It's a Supacaz bar tape. I have one (teal) wrapped on My Salsa WarBird handlebar. It's quite attractive (if a bit overpriced), but not as much as some (I prefer Fabric and Lizard Skin). Also, it's extremely fragile: My sticky (a result of washing) gloves peeled of the surface layer in absolutely no time.
I do, however, like the look of the metallic purple Supacaz headset cap I have on two of My bikes.
appreciate that this mechanic had a hole puncher. annoys me when they just stab a hole or go around it
perfect job
Pro at work.
とても素早くて綺麗に仕上がってますね！流石です(๑•̀ㅁ•́ฅ✨
Wow you've wrapped a few bars in your day. Very sure hands.
Just like wrapping a tennis racquet handle.
레버옆 버튼을 누르시면 페달이 자동으로 페달이 돌아갑니다 수동으로
If only everyone did their jobs with such precision.
bar end plugs that can be tightened via an allen key? Oh yeah... that's wassup...
yep, I bought Lizard Skins and they don't have it... poor, will never buy again
Martin Zvarík But they have 3,2mm ☝🏻👍🏻
Bicycle sunday I had them in 3,2mm and they couldn't be tightened via allen key (I also lost one end plug in like a week, very poor quality), plus they were NOT COMFORTABLE compared to the originals once I had on Specialized Tarmac Compact... they felt like plastic... rain weather also bad... too expensive... they are HYPED as hell, don't understand the positive reviews
Too heavy, simple ultra light caps
Omgosh, seems he's doin it first time! And no Beer before taping??!! It can only be wrong!
😉
shit took me 1 hour each side and this man finished under 5 minutes
He's put sticky face up electrical tape before the wrapping so it sticks good.
I like to think that tape no longer squeaks and they make the noise themselves from now on.
skinny55772 correct that's why they never show the guys mouth. many pro mechanics do it, it's their efficient yet mysterious hive language
Valeu a dica muito boa
Right side - start counterclockwise???
reversed
hermoso trabajo
That's expertly done - chapeau! Although I always thought you should wrap from the inside outwards? In other words the opposite way to the way he's just done it?
Andrew Pike Indeed, so that holding the handlebars would actually tend to tighten the tape. Maybe this tape is so good that you don't even need to pay attention to that detail.
wiwh I doubt it's the tape. They probably just wrap it so often with fresh tape that there is no need to worry about the long term wear and tear of it.
It depends on the rider's preference, most people prefere it as you described. But some like it this way.
The guy at park tool said to wrap the drops in the direction of the force that the wrists tend to rotate, right side clock wise left side counter clock wise when facing in the direction of the front wheel. does Peter Sagan tend to rotate his wrist inwards on the drops?
Good Job
Do you have a video on bar roll for a gravel bike . I'm getting numb hands/fingers and I'm sure it due to bar roll
Terasa mimpi punya sepeda seperti kepunyaan Peter Sagan
wrong direction at the botton
another pro mechanic that wraps to the inside of the bars, ( several video's on here that do that ). Your hands twist to the outside when in the drops and to the front wheel when the hands are on top. To wrap any other way you are going against the grain so to speak, more of a chance of unraveling. With the modern quality sticky tapes if you do a good tight wrap you probably are not going to unravel no matter which way you go, but correct is correct.
The theory here, especially on a sprinter's bike, is that he's actually pulling on the bars when in the drops. I prefer to wrap this way and I never see my tape or any of my customers' tape come unraveled.
Cody: Yes you may be pulling on the bars when sprinting or out of the saddle but your fingers are still wrapped around the bars from the outside going around to the inside. When you pull or apply pressure your elbows are out and your fingers are tightening to the inside. At least mine seem to be doing this but i admit i'm no expert, as i said if you do a good tight wrap either way it probably will never come unwrapped.
Another reason I wrap this way is that I could never get it just right at the lever clamp when wrapping outside-->in. I'd end up with a lot of bulk at the clamp or have to resort to using the cheater strips. At the end of the day as long as it looks good and stays put, everyone's happy. Cheers.
Steve Bullard My hands twist inwards in the drops and backwards on the tops...
That is a common misperception in the proper way to wrap bar tape, this video is done correctly. The issue is do you want the tape to tighten or loosen in high stress situations. If you are just riding casually on the drops or the tops of the bar then you are correct that you would be twisting the tape looser not tighter but you are not doing so with enough force to unwrap the tape. However when sprinting hard in the drops you are rocking and pulling the bike side to side and will actually be tightening the tape and same for hard climbing efforts most riders are not leaning on the tops but pulling on the tops again twisting the tape tighter.
Ooops! I always thought the right side should be wound clockwise.
A regular mortal will start twisting his hands to the outside when riding on the drops, whereas a pro really twists inside in those hard push moments. Thinking you are a mortal, clockwise on the right side is perfect for you. And for me. :)
My life is now complete..................................
Supakaz...+1 in comfort
Love it 😊
tag Heuger! the technical? wow...have you any vacant to work there?
Intrigued why he starts at the plug end and finishes on the top. The factory applied tape on my bars goes from the top, self-trapping itself (no electrical tape required) and runs to the bar end plugs where the plugs retain the end.
Because then the leading edge would be on the side closest to you, all the way down the bar. This means that your natural grip will cause the edges to curl up. Fine if you don't ride a lot or you replace it every few months.
Marvelous.
Damn that ginger can wrap
早くて無駄がない
That tape is specially made! That’s not what you get in stores. The adhesive is thicker and the tape design is different too. It also seems longer as well. I wish I could buy THIS tape
do you realize that you CAN buy the exact same tape right??? you can get it ordered by any bike shop. heck you can even get it directly from the manufacturer online.
Calvin Jones of the Park tool company would have kittens watching this
Where did the electrical tape comes from?
perfect
I can't understand people who choose cylindrical cross-section handlebars to ergonomic, aero flat profile ones. The only advantage of the former is that it can accommodate more accessories like mounts, brackets, lights. The latter is much more comfortable, is more aerodynamic and looks better.
Aero bars are expensive, at least for us mere mortals
@@matteocristini6221 I beg to differ. While carbon ergonomic handlebars are ridiculously expensive, so are carbon cylindrical cross-section ones. Alloy ergonomic handlebars cost about the same as their round cross-section counterparts - €40-70 - not cheap, but somewhat affordable. Check out the Vision TriMax alloy ergo handlebars. Or Pros. Or Zipp ones.
As for Sagan, of course, Sagan's sponsors can easily afford to give him the most expensive one there are.
@@LeoInterHyenaem I see your point and respect your opinion, but I mean most people are fine with what comes stock on their bike I guess, or at least I am.
Carbon bars? No thx. Rather have titanium or steel.
Der Mechaniker hat einen Aufnäher am rechten Ärmel: "Tinkoff Sport"
You've got to love that Top Cap !!! #gotmytopcap
Hugo Teixeira Mckoy what's it say? something about fit body?
I guess he's done that once or twice before? ;)
Second time.....
That hour
Prceless!
Tinkoff likes to wrap inward it seems.
Crude wrap.
Huh. I always start at the top, so the end plug secures it, no adhesive tape needed at all. Never a problem in 10 years.
And then you flaps are wrong way :)
You wouldn't Roof a house starting at the top. Or maybe you would!!
In questo video non è interessante il nastro manubrio di Peter Sagan ma è interessante vedere l'attacco manubrio che usa che è molto strano e particolare fate vedere quello
maurizio sempre a commentare😂
nice watch
Nice bike
These pro riders are to flexible. The cockpit is so aggressive.
Big and strong stem !!
又帥又快
Razer on roadbikes? Not a bad idea since they have boost mode.🤔
So why did We started taping only half of our bars to reduce weight?
Very nice
Dude must get payed very good. his watch looks like a 6k€ chopard mille miglia
Supacaz rulez!
Great
Без изоленты в нашем мире никуда
nice...
Is it so simple to Taping the handle bar? 😅
Drops are wrapped the wrong way but then again I guess they do it every second day so it does not really matter much.
Gidon gibi gidon ❤️
woow amazing😨
Is this a compact or ergonomic handlerbar?
None of them, is a traditional bend
巻くの早！
それな
スパカズ硬くて伸びないから尚更巻きづらい
@@user-so8dl6zh5b でもかっこいい