4 x The POWER!!! Fully Built 301cc Coleman CT-200U EX Ep1
Vložit
- čas přidán 16. 07. 2024
- In today's video we let our viewers decide what engine we put in a Coleman Ct-200EX mini bike. We will be installing a Predator 301cc that is fully built with Go Power Sports performance parts / mods. We will be modifying this Coleman mini bike by cutting the frame up to get ready for a swing arm build. We will also be putting a jack shaft on this bike. Don't forget to check out the links below, comment, subscribe, and share to keep the videos coming.
Parts Used On This Build -
Predator 301cc - bit.ly/2Ecf0c4
301cc Stage 2 Kit - bit.ly/2S89ZnY
28mm Flat Slide Mikuni - bit.ly/2Y7xqlo
40 Series CVT Pulleys - bit.ly/3h2GC1z
40 Series 2000 RPM Springs - bit.ly/2VrkciL
Medium Weight Rollers - bit.ly/312ms2o
40 Series 2600 RPM Kit - bit.ly/3kPFDEd
40 Series Reverse Wound Spring - bit.ly/3avQ2R1
420 Chain - bit.ly/2qHyOgB
Engine Plate - bit.ly/32a6zUM
5/8” Jack Shaft - bit.ly/301ed6a
Jack Shaft Bearings - bit.ly/2WikDuc
Jack Shaft Sprocket - bit.ly/3h1r9iw
Mini Bike Brake Kit - bit.ly/2rcvF8N
CR80 Foot Pegs - amzn.to/36w8Ygc
Catch Can - bit.ly/2QHbucO
Kill Switch - bit.ly/2DPEFHK
Twist Throttle - bit.ly/32RxC9x
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - bit.ly/2HVk8jl
Everlast Welder - bit.ly/2T0V0xK
DuroMax Generators, Pressure Washers, & Engines - bit.ly/3894jRJ - Use 20% code RBG on ALL DuroMax products for February 2020.
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
1740 Beard Balm - bit.ly/32L1eVS save 15% with RBG15
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage - Zábava
Love how your videos are just some friends hanging out building stuff. You guys really seem to have a lot of fun doing this stuff. Keep it up
Now Lonnie looks like the dad coaching the little league team instead of the uncle that's drinking and yelling at the umpire XD
Lol yes he does.
Wooo here we go. Still want to see you take a big wheeled 3 wheeler and fab a swing arm to make it a monster mini bike..... could even go crazy and make it a single sided swing arm to be different
I’ve been waiting for you guys to bring out the Coleman’s again
I’m all about these videos! They entertain and I learn something every time. Can’t wait to get my own!
Glad to see the Mini Bike Monday is back! Thumbs Up.
Thanks for the video RBG
Hey fellas! Just wanted to say thanks for all of the great tips. I’m going through my first mini bike engine swap. Coleman 200 ex. I’d never do it without your help. Basically just rubbed my old motor out so I’m using it as practice for the governor removal, beefy valve springs, and flywheel. Of and don’t forget the CVT! It’s going to RIP!!! Or I’m gonna die... lol! Hey thanks again guys. Keep them coming. If I don’t crash and burn on this I’m going to swap motors for the monster moto my boy has been riding.
I can't wait to watch
Bought one of theses while back it’s been a lot of fun the way it is. Using this for a training bike for my kids and I have to admit first thing to go is the pegs. Just an injury waiting to happen
Thanks so much hopefully more 301 vids to come💯🙏🏽
I like how you can here Becca giggle when Greg says, I liked it!
I love it guys!
Bro you got great content! Good video man🤘🤘🤘
I've got 2 gx270's fully built, they are awesome little motors!
Glad to see mini bikes back! Who's the guy singing while showing the patron wall hes freaking alsome lol
Just a video I found lol. I will put a link to the video in the description
i still love my coleman ct 200 u ex mini bike. next buy will be a trailmaster for sure.
Mini bike Monday is why I subscribed a long time ago!
It's back for good!!!
You should have guests every time on the Patron wall, that was great!
Love the new intro and outro music keep it up baby daddy lol
its goin to look sweet !!!!!!
Back tire looks like poo on it!!😂👍🏻
It was a big chunk of mud.
I was thinking the same thing
I hope Braxton gets a little positive affirmation every once in a while... Braxton, I think you're doing a great job!
love your vids kee p it up
More Coleman videos!
Yeah boy
I need that shirt Lonnie has! Its awesome!
Only saying this cause I love and care about everyone in this video and comments section: slap a guard on that grinder with cutting disks. Had one explode on a coworker and a big piece of it got lodged into the bone in his forearm. He's lucky it wasn't his face. One of my dad's employees had one explode on him too. The guard is there for a reason, boys!
Dig your vids man. Where’s EP2? I have the same bike, waiting to see what y’all are doing.
When you live in California and can’t order the trail master because it’s not Carb compliant. Cmon California 😢
That would be frustrating
Running that inbound is going to put the belt on a huge angle at full engagement...
Just received the 301cc today!!, but now I need a new gas tank :( too big. Working the stage 1 performance kit on the EX frame without the torque converter... for now :) .
Whoop!
RBG align the pulleys on the lathe and turn down your own stuff. Do you have horizontal boring bars, high speed steel inserts, dial indicators, and quick change tool rest, and tool bars?
I have some tooling for the lathe. We will be messing with the lathe in a few weeks. In the middle of selling our house right now so time is slim.
I think the 125 would have been cooler. Plus you get a little more fun with the gear box . Just my opinion
Pony riding lane frost lmfao that was a good 1
What flywheel should i use on my duromax 18hp?!?!
What carb on the 301 great video
I swear i hear "baby daddy" in a part of the video😏
How did you fix the end play crank ? i'm having that issue as well kind of loose an chattering from the box.
Will u guys ever try to put the built 301cc on the trailmaster mb200 because that's what I am trying to do to mine I want all that power out of my bike ya know
if you flip the driven pulley, wouldn't that ruin the belt because i think they are directional belts on those torque converter? the face angles on the driven won't be true to the driver pulley ?
What size carburetor do I need for my Coleman xx100c mini bike
Where can I get a jackshaft tube like that. I don’t have a lathe or I would make it. I put a pillow block on my project and the bearing can move inside the block, putting too much stress on the end of the shaft, causing the shaft to break. That tube would be the answer!
U know if this will fit on a Coleman cc100x
4:48 I like the 60 tooth much better with a TAV. I'm currently using a 9 and 60 tooth. The 50 worked good with an 8 tooth. Never tried it but the 60 and 10 tooth should work well.
I don't recall you guys using a 60 tooth with the TAV? Riders choice I guess.
hey redbeard im not sure if youll see this but i bought a 200cc baja bike.. the clutch eventually went out on me and i was wondering is there anyway to know what size i need to order without actually having to take it off?? thanks
Wish u guys would of put the 125cc in the mini bike.
I’m dying to see mini bike with gears.
Where can I order front forks for my Baja warrior
Man iv broke frame twice an foot pegs off my ct200u ex ...stage 1 predator 212 with ported head an juggernaut an 52t snapped frame were bar that holds foot pegs is welded
Dude! Where do I get that Minibike shirt he was wearing??
Wonder if anyone has put a vtwin on an mb 200 minibike?
If I buy that motor do I have to buy anything else for the bike??
So, not related to this video but have you ever broken an exhaust bolt while riding? I have a racing clone 212cc that just snapped an exhaust manifold bolt while riding near full throttle.
I have not sir
@@RedBeardsGarage ugh this sucks, love your videos. Gravy bone rider myself.
Open call my comment you're one of the ones that put me on so that bike show me a was worth the money I did a little bit upgrades to it I told you the video link I hope you see it but I was trying to catch your live stream I missed it but are right family
How fast is this bike with all mods???
Just got a 420cc engine and I can’t find this frame to buy to save my life. It seems sold out almost every where.
You should mount a harley trans in there
No way Lonnie looks way younger!!!!
What is that song at the end 😆
Don't know but it sounded like Shit.
Love the videos, but i have an editing suggestion. Could you please turn down the volume or add in music when using power tools, we all know what they sound like and don't need to experience the full volume of them in videos. I have to have my volume up to be able to hear everyone talk but i don't need my ears to bleed when you use a grinder or impact or welder.
Will do sir
The fender will loosen and shoot off of it in no time if you left it.
Lonnie looks younger imo
Wheres part 2?
Isn’t that drivin pulley gonna be backwards so it will not receive the belt correctly??? Yano one side is beveled!!!
Make her a soft trail 3 wheeler
Where can I find that mini bike shirt??
Go power sports has them
Something is off...something didnt feel right in this vid...
Cant put my finger on it but...
Talk to me Greg...is everything ok down there in Tennessee, the next place closest to home in Kentucky?
Is there any way you can build me a motor preferably 224 I have 1200$ and want to go at least 70mph
You preferred a 212 mega Moto pro over this Coleman
Yes
@@RedBeardsGarage ain't got one of them for sale do you
Geepers mister....
17th!!!
Mannn
That rear wheel looks like it went through dog crap!
So why power no sped lol make one a street legal bike and cruise around town with it
New Sub, but your friend needs to figure out how to take a chain off. Few other things.
Dont see y'all using the jugernaut much anymore
We use it on all of our small block engines. It can handle the output of a big block
@@RedBeardsGarage thanks for replying love the videos
🧔Nice work👍 not a fan fan of that Outro though 👎
All these power guesstimates knowing its no where near 4x
Where did your viewers go?
They all left. I think it's finally time to retire from CZcams.
Red Beard's Garage i guess. I dont know why. Yall had good content. Carsandcameras gets lots of views. Maybe look at what they do differently than you. Or maybe God had somthin else for yall. I dont know. God bless have a nice day
@@DavesWhips Well it could be that all the God talk turned off a bunch of people. Just a guess.
PeanutProductions well if so then this world is screwed up
@@DavesWhips Not really, not everyone has the same beliefs as you. I was always taught that there are 2 things you never talk about in public, religion and politics, because you never know who you'll alienate. Now, it's important to realize that I don't think this is the case with Red Beard, it's just a possibility.
So.... Are y'all gonna come out with beard or hair products??
I wonder if he will work on viewers mini bikes and stuff. Obviously at a price. Living in DFW and I think he’s in Abilene. It’s not exactly a short drive
He does not live in Texas
He lives in tenn i think or close to nc
Nat I could’ve swore something somewhere said he lived in Abilene
@@Abrasivecactus nope, Tennessee, hence why it is fairly easy for him, cars and cameras and rather b welding to meet up as they are a few hours apart.
my name isnt up there i donated 100 3 years ago
Big glob. Of shit on that rear tire
Hey i dont care what you call each other.....but my 4yo little girl who religiously watches this over and over and over and over again does. Then you have the nerve to tell me its not the channel for me because she was upset. We are currently fuxing up a manco 606 and this little 4yo knows more about go karts and minibikes than most grown men. O well. Rant over.
First
SHADDUP
This video is more about your personal lives and friends rather than content, edit more out.
thats whats good about it, if ya don't like his style find a different channel
Older and dumber