Sinilink XY-AP50H Bluetooth 5.0 Amplifier (TPA3116 D2 2x50W) Assembly & Sound Test
Vložit
- čas přidán 23. 10. 2020
- A good low cost amplifier with App control. Clear sound and strong power output, quality build and perfect performer. No bump at start up, no strange hiss or noises, no chinese bad english talking girls during connections 👍
In this video: fast unboxing & assembly and first sound test
XY-Ap50H Bluetooth 5.0 amp link:
s.click.aliexpress.com/e/_AdUNkf
More reviews on Facebook site:
/ alstechreview
Please support my channel and buy me a Ko-Fi:
ko-fi.com/alstech - Věda a technologie
followed this video ... its very helpful till to day... thanks
Thank you so much!!
Try to push that volume knob it will pause the music and play then if you long press that it will turn off ang long press again it will turn on 😉😉
Really excellent instructional video, thank you !
Listening from my Sinilink XY-AP50H connected to my pc. Amazing quality for the price.
I have the XY-AP50L,the sound was great...
Did you find out the difference between the two - his AP50H and your AP50L, Sir?
@@prof8957
I found no difference..Only the AP50H has come with little heatsink to dissipate the heat from the audio IC...
is xy-ap50l needs heatsink on 19v 4,74a?
@@melihyakc1592 if you have one that fits in the audio IC(AP3050D), you can put it on..
@@christianarcfernando7363 oh ok. I have to take precautions against the heat. thanks :)
What app do you use? All I can find on site that sell these really good amps (for the price) is all in Chinese and I can’t understand anything, preferably to iPhone or computer/home assistant working API?
if i connect aun aux to the audio autput, will the studio speakers stop sounding? pr does it all work at the same time?
Hi I got this amplifier. can you connect 2 speakers of 100w each, 8 omh? with a 24v 4 amp amp does not hold them!
Sir is this plug and play just speakers and power and all amp audio ic bt ic on board
Hi. Sound real good? Vs pfff?
Asik asik KEREN banget
Can i use bluetooth and auxiliary input simountaniously?
Hi! Can i make a 2.1 sistem with the music out plug?
Hice todo el armado completo tal cual aparece al video. Pero a la hora de. Conectar a bluetoo. Sw logra enlazar pero inmediatamente sw desconeta. Ademas de que cuando reproduce por aux. Inmediatamente se apaga..ayudenme porfavor. Swra que vino defectuoso?
Anyone know how to set a default audio output? I am using this with my PC via usb connection but i have to start the app and manually switch it every time which is a pain.
is there any noise when volume is turned down especially when it is operated using a power adaptor?
Almost no noise, if good quality power supply is used.
Has anyone gotten these to work as a usb sound card? It's not recognized by the computer as a usb device and I am unable to select the audio card button in the app. It will stream via bluetooth or via the usb port when connected to my phone.
Que aplicación utilizas para compartir por Bluetooth
How pair bluetooth w 2 sinilink? Do u know?
Can you control volume from the phone
How is the bass ?
este mini amplificador trae 2 canales cada uno de 50w + 50w = 100W si quieres sacarle todo el potencial la fuente de poder sería:
24v - 4.16 amp
19.5v -5.12 amp
19v -5.26 amp
12v -8.3 amp
Y Tendrías los 50w +50w por canal. A 4 homnios las bocinas
aquí hay mucha tela que cortar si hablamos de las bocinas... ya que si cada una es de 30 +30 watts = 60 W. .. sólo por dar un ejemplo y le pones una fuente para sacarle los 50w +50w = 100W quemas las bocinas de 30w si les sube todo el volumen o alguien por descuido lo hace... por eso recomiendo buscar la fuente según la potencia de las bocinas siempre y cuando estas estén por debajo de la potencia del amplificador... si las bocinas sobrepasan al amplificador pueden utilizar cualquier combinación de fuente que puse arriba... tengan encuenta que si usan bocinas de 100w + 100w = 200W el amplificador sólo les dará 50w por canal trabajando al máximo y las bocinas a la mitad de su potencia trabajarían...
Espero haber despejado Muchas dudas para todos... y como dije aquí hay mucha tela por cortar.
Depende. Los 50w RMS reales se obtienen si utilizas altavoces con una impedancia de 4 ohms...
@@henrygonzalez5314 Obvio eso lo dice la ficha técnica del amplificador... y aquí hay mucha tela que cortar si hablamos de las bocinas... ya que si cada una es de 30 +30 watts = 60 W. .. sólo por dar un ejemplo y le pones una fuente para sacarle los 50w +50w = 100W quemas las bocinas de 30w si les sube todo el volumen o alguien por descuido lo hace... por eso recomiendo buscar la fuente según la potencia de las bocinas siempre y cuando estas estén por debajo de la potencia del amplificador... si las bocinas sobrepasan al amplificador pueden utilizar cualquier combinación de fuente que puse arriba... tengan encuenta que si usan bocinas de 100w + 100w = 200W el amplificador sólo les dará 50w por canal trabajando al máximo y las bocinas a la mitad de su potencia trabajarían...
Espero haber despejado Muchas dudas para todos... y como dije aquí hay mucha tela por cortar.
Son muchas cuestiones a tomar en cuenta. Lo recomendable sería una fuente de 24v 5A para obtener la máxima potencia del TPA 3116 con la mínima distorsión posible. Esto además te da cierta versatilidad a la hora de conectar parlantes de impedancias más bajas (a menor impedancia, el ampli entrega más potencia pero a costa de más amperes y por tanto más se calienta el circuito integrado, haciendo que no rinda tan bien o se queme si no cuenta con protección para sobrecargas).
buena info, la verdad si suena como estafa, es increíble que pueda ofrecer tanto en un circuito tan miniaturizado, estoy pensando en comprar unos 100x2 para unos speakers viejos que están como nuevos pero no quiero botar, de unos challenger 4500 ms, estos son de 8 omhs y de 10 pulgadas, no estoy seguro de cuanto requieren pero creo que es 150w, por lo cual estoy seguro que trabajarían por la regla del 75% de capacidad, solo no hay que forzarlos, pero tu que opinas? la verdad me gustaría saber tu opinión.
O meu não veio essa peça de entrada USB
Hi i got this today but can i know if theres a specific instruction to control this? I cant seem to get it running through AUX by itself or Soundcard. The only way i can do this is firstly connect to the bluetooth app then change to AUX.
hello. have you discovered how to run the aux without using the app?
@Juan Francisco Hugotero wow. Nice. Mine is not.
How does it compare to Wuzhi Audio ZK-1002M or similar amps? You could make another shooutout video :)
Don't know if anyone has notice but the XY-AP50H specifically says it uses the Texas Instruments TPA3116 chip whereas Ebay listings for the XY-AP50L (which looks the same but appears to be a little smaller) doesn't say that so not sure if it is using a knock-off chip or what. Just thought I would mention that to see if others have noticed that as well.
I found a site which has both: L and H. H is like 30% more expensive, and is listed as having TPA3116, while the L version does not specify the chip code.
@Alejandro Julien It is usually the AP3050D still a very powerful chip but id say it is less efficient and produced less power (around 30W max per channel) but still sounds really good if you set the equalizer properly and have suitable drivers for it that can handle the lows and highs - power source is a must with these id say 4s or 5s lithium pack plus extra heatsinks on the bottom will give you best results.
With that said - even when 30% more expensive the thing is maybe two dollars extra for the Texas Instruments chip 😂 so no big deal - i just ordered a AP100H with dual TPA3116D2 chips - a decent heatsink.
How much db is it?
How about the USB type how to use that.
What power supply do you recomend for 2x50w??
24V - 3A
@@als-techreview thank you very much. I will put this module inside a Focal studio monitor speaker it will make a very good bluetooth speaker
@@carlossaraiva8127 Don't turn it up loud, they don't include the heatsink any more, you'll melt the chip if you turn it up too high !
500v 😂
este mini amplificador trae 2 canales cada uno de 50w + 50w = 100W si quieres sacarle todo el potencial la fuente de poder sería:
24v - 4.16 amp
19.5v -5.12 amp
19v -5.26 amp
12v -8.3 amp
Y Tendrías los 50w +50w por canal.
As others have asked, how do you switch it to the aux input. Is a phone app required, and if so, will it retain the setting after it is set once? Also, does the volume knob press in to turn it off?
@Juan Francisco Hugotero Good deal. Thanks for the info. I ordered one but it hasn't arrived yet.
How to next while playing by usb??
when you insert 3.5mm aux input it will switch automatically. this is required every power cycle. or install Xinyilian or sinilink for full control. the OTG usb/ soundcard function plays when connected and selected in source device and will stay on after power cycle. i like these amps. works well with 12v battery ie 3x18650.
E possível conectar no computador via usb ?
Please, does anyone know how to set up the account on Sinilink, I'm not able to set it up on my cell phone or computer. I want to monitor the adjustable source name YX6020L, thank you all.
Speakers kitne watts ke hai
Yo creo que una de 12 voltios a 2 amperios y unos parlantes de 4 ohmios a 20 watts quedaría muy bien
Sin unos buenos parlantes nose le saca el potencial ya la pobre compré bocinas grandes y un subwoofer
@@one2862 pero eso no lleva subeoofeer solo es d 2 canales
@@miguelmendez5411 lo ideal seria usar un transformador de 24v de 4 amperes para obtener 24x4= 96w para sacarle el maximo probecho y acompañarlo de 2 parlantes de al menos 50w cada uno..eso seria el equilibrio..
Is it okay if I use 12v?
yes. i am using 12v 4a and sounds good
19v normal 3a?
19 v X 3amp = 57 watts de potencia y este mini amplificador trae 2 canales cada uno de 50w + 50w = 100W osea estaría trabajandolo a la mitad de su potencia. Y te daría por canal 28.5 watts si quieres sacarle todo el potencial la fuente de poder sería:
24v - 4.16 amp
19.5v -5.12 amp
19v -5.26 amp
12v -8.3 amp
Y Tendrías los 50w +50w por canal.
Blutut sering hilang mas bro
I mounted it on my computer but it makes wierd noizes like hum or so. It is a dektop lenovo. Any one ides ? I tried shielding the module with metal tape but it did not work. next step I will try : more shielding, decouple the power supply, then maybe change PSU
Could be the psu. If that doesn't solve it, the problem could be coming from the pc. I had one that would buzz when connected to my laptop but when I connected my phone or the TV, silence. Not sure how to remedy it just yet. Try plugging your pc to a different power outlet
@@sule_imani thanks for the advice ! I can not change the outlet because of a machine connected to it : the PC can not move.
But I will try something !
@@leoetcheverry9685 when you find a solution, please share
I just purchased one of these and it has removed at least 70% of the bass from whatever headphones i plug in to it, it makes my KZ ZS10 pro's sound like poundshop junk, it seems to be totally incapable of producing bass through the headphones port and the input method, whether aux or onboard usbc makes zero difference. I tried using a 12v 2 amp and a 12v 5 amp psu, neither improves it, it will make whatever headphones you plug in incredibly weak and tinny guaranteed. Edit: Just tried it with speakers and for speakers, it's perfect, they sound almost as good as through my amp, so iv'e no idea why it wont work for headphones.
maybe it dont work for headphone ? from the price point its damn cheap to power up speakers
@@sdqsdq6274 Yes i agree, but has anyone actualy powerd up speakers using a proper system and not this amp, i suspect if they did, the speakers would have more bass and mids because the headphone jack is using the same chip etc its just diverting the sound to the jack i think, but who knows, i will have to try it i guess sometime.
@@sdqsdq6274 OK so i just tried it with speakers and it's great with speakers, it even manages to produce the bass from "Bass i love you". No idea why headphones don't work very well, maybe i got a dud.
Have the exact same issue (bad bass on headphones, fine with speakers, no matter the input source) with the XY-AP15H which uses the AP3016 chip instead of TPA3116. Since the issue occurs with different chips I suspect there is another component shared between these two similar models that is behind the "weak bass in headphones" issue
Edit: seems other reviewers have picked up on this as well with similar clone boards: czcams.com/video/Gx2y8QWK0Oo/video.html
@@beaulac3215 Good to know i'm not the only one :) Seller partialy refunded me for the isue so it's good as a backup speaker amp.
XY- AP50H Bluetooth kitne Rupay ka h
how to reset this device?
Price Please
10usd aliexpress
Ordered two of them and they arrived, Damn thing doesn't work !
You can't switch the amp input to line in ! Only with a stupid app that has a 2.3 rating on the Play store. It crashes on my Samsung Galaxy phone and refuses to load.
Buyer beware ! SIGH
Thanks for sharing, I was considering this board for a line-in project, but may have to reconsider
@@nix324 I gave up on it and just got an awesome cheap S/H Logitech speaker system.
Piric ketna