King of the 4-Jaw! | Bar Z Summer Bash 2021
Vložit
- čas přidán 26. 08. 2024
- I went down to the Bar Z Summer Bash last weekend and cleaned up at the 4-Jaw challenge. We'll talk about it today, and maybe take a victory lap, if a small one.
#illbeback @polishthebelt
Bar Z Summer Bash Livestream: • The Bar Z Summer Bash ...
Visit Yuchol at Woods Creek Workshop: / @woodscreekworkshop9939
No affiliate links this week. If you want the hardware shown in this video, you'll need to come to the bash next year. See you there!
That grin when you said "good luck", haha!
Congrats, James. Well met.
Now that's a sweet win! Congrats and job well done!
Nice win! I enjoyed your contribution to the Livestream as well.
Congratulations on that incredible win. You faced some stiff competition and have something to be truly proud of.
I enjoyed watching you and Quinn during the bash. Y'all did a great job and I look forward to watching you at the next bash.
Way to go James. Congratulations.
Well done! Isn’t so, that we often think we’re done before we’re really done? But diving back in get results every time.
Congratulations on your win and on your time at what must have been a great retreat…
Im betting James' face is sore from grinning... good for you !
What a great (and well deserved) accomplishment!
Two people gave this video a thumbs down , Are you kidding me !
Congratulations again James. I was one that had the pleasure of going up against you. Was great meeting you. Thanks for sharing the video. I posted on my Instagram you beating me. Gary
They were the sore losers!🤣
Good job and good friendships. Thanks for sharing a good time. Now what about that money!
Hi James Congratulations,
The 4 Jaw Chuck is over Here in Germany a absolute Unicorn normaly called Planscheibe. I have never seen sombody using it but i am following this Challenge since Tom made the 4 Jaw King Maker.
Saw it live and enjoyed your video recap….awesome win!
You just put a very big smile on my face. Good for you with what is plenty of stress going on.
Congratulations James!
Nice job James. The best surprise is when you surprise yourself Couldn't happen to a more worthy guy. Maybe if this year goes better than last, I might see you there next year.
Keeping your wits about you when the pressure is on is always tough. You did good James.👏🏻
You‘re our hero, James! Well done!
Congratulations James. Awesome win, love the smile at the end. Good luck indeed 😂
Hi it’s Stacie! Great job James! You are the man! I can’t do that sort of thing but I can watch someone who can tell me about converters and that kind of stuff! Awesome video!
You definitely won because of the backwards hat 😜 Congrats on the victory!
Great video and thanks for sharing that with us. I wish I could have attended and met some the people, like you, that make the YT videos I enjoy. I was surprised and glad that you won. Darn tough competition too. Thanks again and keep up the good work
Hello James,
A big CONGRATULATION on winning the challenge... I am hoping to be at the bash next year...
Take care.
Paul,,
Excellent job.....never a doubt in my mind that you weren't gonna succeed....Hail to the KING !!!!
Been waiting and waiting for the 4-jaw video to come out this year. Congratulations - SUBSCRIBED!
Congratulations on the win!! Not an easy part to indicate, great job!!
Congratulations James! You made that look easy! We’ll done!
Congrats James! Good job!
Awesome win James!!!
Well done. Thanks.
Clean win James, belt shipped Friday (insured)
Got it. Thanks!
Congratulations Champ.
Remember, defending the belt is even tougher.
Had to miss the bash myself. Maybe next year.
Very impressive!
Congratulations - I hope to make it to the Bash one of these days.
Great to meet you James, Fun time at the Bash and Congrats for the Win.
Thanks. I enjoyed meeting all of you. I'm looking forward to doing it again.
Hat to attack position!
"Aye aye captain"
Congratulations James, a well deserved win 🏋️♀️
Very cool. You've reached the upper echelon. I keep meaning to try to attend this event and offer to be the still photographer. Perhaps one day I'll make it.
Awesome job, congratulations! I guess only using three of the four jaws and/or barely grabbing it wouldn't work either ;-)
I was translating into polar coordinates in my head, and that worked okay for me. It was challenging for sure.
Congrats and thank you for a fun video.
That grin at the end translates to " You got no chance".
There's always a chance. :)
Congrats man, awesome work! Also Quinn looks wayyyy taller than I thought we was, her videos make her look 5'4" ish but she looks much taller than that here!
I think she's almost like 6' or something
Relative size is really hard to judge in videos. I keep overestimating the size of things in her videos, including the steam engine. But yeah, she's about 6'. I was surprised as well.
Congratulations James. And again we or at least I learned something new.
Congratulations James
It was a blast for sure!
Congratulations 🎉 👍👍😎👍👍
Congratulations, James! Tough challenge!
Up against Adam...now, that is tough competition!
Congratulations James.
nah, Keith fenner smoked abom every time and not just by a little, minutes
Flexing that practice 💪🏻 awesome job 👍🏻
Congratulations! What an interesting group of people in one spot for the event! Content creators have a lot in common! Nice job!
What a great contest and challenge.......congrats on the win, can't wait to see what great tools you buy with the $1000
Sweet. Good Job.
Congrats, James.
Nice! Congratulations James, I was happy for you when I heard on the live stream you won.
Bravo, James! You're carrying the torch for all of us home shoppers out there, making us look DAMN Good!
Well done.
Fair play to you!
Nice one. The rather worrying thing were the fact there were no youngsters there that are coming through, or not in the video anyway.
Awesome job man
Hey James, well done!
Congratulations!
MIND OVER MATTER....GOOD JOB!!
Congrats! Nice job on an evil challenge! 8-0
Well done , I think Quinn could show you a thing or two roll on next year .
She was there, but didn't enter this year.
7 months late, but Congrats James!
Well done!
Congratulations!! Did you read the fine print that said you have to wear the belt anytime you are in the shop?
The belt will need a few more holes punched for that to happen. :)
Congrats! This is not a small feat. I've heard the competition is really stiff there. :-)
Hiya James. Congratulations
Nice
Congrats!
Great job James, I had a feeling you would win
Nice one !!
“Are you a sociopathic machinist?!” “I’m more of a sadist”
😎
About that dinner… 😁. Congrats!
should have let adam (abom) have a go with that 4 jaw nobody would have a chance :D
Congratulation!
Way to go James!
Nice job James!
Solid Game Face
Love to steal that belt😉
That's so awesome 😎
Thanks!
Looks like you have a new milling machine. I don't know if you mentioned it, I have no audio.
well done and well deserved james but we have some girls in town which make a thousand even faster
Nice video! And that Osmo did a great job--I might have to get one. It was nice meeting you and chatting at the bash.
Yeah, it was nice meeting you. Been thinking about injection molded parts since we talked. I 3D print a lot of parts for ELS kits...
@@Clough42 I can use Santoprene (TPU, I think) to create flexible parts. Molding is fast, at about 50-100 parts/hour. It would be fun to collaborate. I'll send you an email.
Well done on that weird part.
Just now watching the whole event,,and congrates on the win ♥️😜 Awesome event. Have you seen Brian over at bcbkoc02 chuck up a cummins turbo on his lathe??? Check it when you have time,,,Bear
The thumbnail for this video should really be your new profile pic.
Nice😎
That’s pretty insane
Congratulations!👍🏻
Congrats, love your channel👍👍👍😎
Nice work James! What was the actual time to get that bad boy indicated? 6.5 minutes I assume?
Yeah. I think 6:40. I could probably do it in 2-3 minutes now, having done it once. Maybe. It's a casting, so it could easily go sideways in a hurry.
i knew the results and was still sweating it out at home .. Especially on that first stop.
Congrats! The explanation at the end was both fascinating and frightening. Fascinating because neither the part nor the setup were contrived. Frightening because I don't think I've ever seen that level of pure evil from a machinist. If I ever need brake rotors turned, I'm paying on time, in cash...
Good job! Seems that Adam Booth wasn't there this year. Might have been a tougher competition otherwise :-)
I thought the same thing lol 😆😉
Yeah, that was kind of a bummer. I was hoping to meet him.
Well done James. For a minute I thought he's going to be toast but then I realized that unless Adam Booth had lost a lot of weight, that wasn't the abom Adam. Well that grand should buy you a few more toys for the shop. Congratulations from the Canadian banana belt 🇨🇦👍😁
Ok James, so now can you do an electronic 4 jaw? Seriously one of the selling points for the PM1127 is that it comes with the dreaded 4 jaw. I am no Abom or giterdone or blondihack, but its time to try.
Using a 4-jaw chuck is not particularly hard, as long as you're not in a hurry. It's the same as most machine setups. Take your time and do it carefully and you'll get good results.
@@Clough42 Agreed. First time I ever set something up in the 4-jaw I had it dialled in within a few tenths in a minute or two. It's a logical process, not magic. I wouldn't win any competitions but it's really not that hard!
Congratulations on a great win. How many contests proceeded that one?
I am always amazed at your skills as engineer and machinist and yet your ability to provide clear and concise guidance so dobbies like me can duplicate much of your designs. I can with C’42 power, single point thread on the most humble of harbor fright combo lathes. I don’t think I will be building any raffle tumbling steam engines, but there might be some trolley parts turned out. (They use short 1/4-24 screws in the GE drum controllers.)
Don't what's better, winning $1K, getting the belt, or getting reconnition from Keith F. Either way congraduation.
Dude. And a hug!
Fantastic James, how many total contestants were there ?
There were enough entries to mostly fill out a 4-round bracket, so 13-15, maybe?
Hi James, I was wondering if you have taken steps to increase dimensional accuracy on the ELGOO Mars 2 Pro like you did on your FDM printer? I recently purchased one after seeing your video. I plan on using it mainly for engineered parts where accuracy is necessary. Is it fairly accurate out of the box or does it require tweaking? Thanks!
It seems to be within a couple thou out of the box. I ran a reamer through a printed pulley to get a good shaft fit, but it prints usable M3 threads.
See.. you are better than you think...Your viewers know that.