PDD Gauge Install | 48RE Transmission Line Pressure & Temperature Sensors
Vložit
- čas přidán 12. 09. 2024
- In this video I install a deep transmission pan and sensors on my 2007 Dodge 5.9 Cummins. The gauges and sensors are from PowerDriven Diesel. Line pressure and temperature sensors to keep an eye on my 48re transmission
Love my boost hunter updates, keep em coming!
Made sure the dogs made an appearance just for you!
Curious why you put pressure sensor there and not in the test port by the dipstick
I put it there cause every diagram I looked up shows it there, I believe if you put it in the test port by the dipstick it won’t read in every gear
@@boosthuntergarage got ya. Glowshift tells you to put the temp sensor there and I've done heard not to.
Put my pressure gauge there and testing it today. Park 0. Moving about 68? Highway cruise 130 same max seems to be about 162.
Gonna talk to my trans shop today hopefully and see where he says is best location. Previously had it on aftermarket trans to cooler
@@nickabel8279 yeah I don’t think you would want to put the temp sensor there but I could be wrong. I’ve only seen it put into the pan.
I think my truck when driving (on the throttle) is around 100-130 and max is about 150-160. I’ll have to double check today. I’m curious what the transmission shop says about the location
@@boosthuntergarage talked to shop today. We both had to make it short so the quick answer was the test port was fine and if on throttle any amount you want to see about 70psi
@@nickabel8279 okay cool, that’s good to know