Knife Making: Feather Damascus Hunter
Vložit
- čas přidán 21. 08. 2024
- First hollow ground blade on the new belt grinder I made. Feather damascus made by my talented friend @sperber-knives make sure to check his channel out: / @sperber-knives
Handle made of wengè, bulloak and buffalo horn provided by:
www.etsy.com/s...
Pins are 2mm carbon fiber and fiberglass rods.
Homemade black and white felt liners made like in this video:
Homemade Liners: • Felt And Resin Liner /...
And here are some of the videos about the tools I used:
Hardening oven: • DIY Heat Treatment Oven
Tempering oven: • PID Controlled And Ins...
My lovely drill press: • ROSA Drill Press Resto...
I listed some of the stuff I use for my projects in this amazon storefront:
www.amazon.com...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
Index of operation and materials:
0:24 Quick etch in ferric chloride to see the pattern
0:40 Knife sketch used as stencil
0:54 Cut excess material with metal cutting bandsaw
1:08 Grind profile with 2x72 belt grinder
1:30 Inside radius refined with die grinder and stone grinding bit
1:50 Cente punch pin and weight reduction holes
2:00 Drill holels, 2mm for the pins
2:20 Blate tapered from ricasso to tip with 2x150 belt grinder
2:37 Notch filed in with round file
2:50 Hardening: heat to 795°c, hold for 8min and quench in 70°c oil
3:17 Tempering: heat to 200°c and hold for 2hrs (final hardness between 50 and 55 Rockwell)
3:30 Hollow grind bevels with 2x150 belt grinder contact wheel
4:00 Three 15min cycles in ferric chloride with light scrub in between
4:12 Istant coffee etch to darken more the high carbon steel
4:40 Handle stack glued with 5min epoxy
5:18 Black felt liner glued with 5min epoxy
5:52 Temporarly hold tang to scales with ca glue and masking tape
6:03 Drill pin holes in one scale
6:20 Match drill the other scale again with ca glue and masking tape trick
7:04 Finishing top of the handle as it can't be accessed later
7:30 Notch for loop ground with dremel
7:40 Final glueup with 90min epoxy
8:49 Handle squared up with flat platen
8:59 And sculpted with contact wheel
9:22 Hand sand up to 400grit
9:43 White mineral oil for finish
9:55 Short secondary bevel ground with MadEdge: www.madedge.net/
10:20 Strop on leather with fine polishing compound
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproje...
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects
If you want to know more about any process check description, I always write detailed list of operations and product used.
And if you like what I do consider supporting me by joining as channel member or through Patreon for early access and voice-over edit of my videos. Thank you!!
Can you make out my design of a kunai?
Cool!
what about making a sheath for the knife?
now make a leather selther pls
ㄴ554ㅡ
Dude, I absolutely love it!!! Thanks you so much, what an honor for me!!
you gave him some beautiful damascus, props to you, too!
@@hooogahooga2909 thank you!!!
Dude, that's stunning! The pattern is gorgeous, the handle is stunning, and the contrasting pin colors was the icing on the cake. Bravo, man.
The profile really compliments the Damascus pattern. Amazing work as usual!
Good to see a knife made in 1 video, not a 12 part mini series
That is one of the most beautiful knives I’ve ever laid eyes on. Great job.
So satisfying to see scales with so many pins just sliiiiide into place. Beautiful piece!
Love this design! The leather tassel on the end is a clever addition but this knife of yours is just begging for a fine leather sheath to go along with it. Any plans for it? Perhaps make it appear similar to a feather to match that amazing Damascus pattern!
Thanks once again for sharing your incredible talent!
Costom handemade damascus steel knife for sale all country payment paypal
Wow !!!!!!!!!!!!!!! What a peace of Art !!!!!!!!!!!!!
legend has it that every time his arms needs a shave, he crafts a knife
i don't think that's legend its truth.
I could sit there and watch your videos all day because you have such a men's talent you turn ordinary metal into masterpieces
Man that low layer count really makes that pattern bold and stand tall! I like the segmented handles that you made and your design for the knife is awesome as always!
These damascus knives are too beautiful to use for working knives. I would put them on display as art.
Most beautiful knife I ever seen.
Looks Awesome Brother :)
Am I the only one who thinks of Hulk Hogan whenever someone says brother? 🤔
Costom handemade damascus steel knife for sale all country payment paypal
Beautiful knife! And kudos to the maker of the Damascus
The concealed lanyard hole is just icing on the cake!
Просто бомбическая вещь!!! Автору глубочайший респект!!!
You are one of the greatest bladesmith I've ever seen
Keep goin'
Beautiful pattern, especially on the left face with the menacing "eye" on the spine. I think you should try making one with clear epoxy handle. Maybe leave in thin spacer materials you normally use and all the cross pieces but use table top epoxy instead of wood.
I could watch him build knife blanks all day. Is it odd thats my favorite part
You are my workshop teacher
One of the best looking knives you made.
Want it! A beutiful crafted piece! Detail on the blade is amazing.
Cara, ver você trabalhando faz parecer fácil. muito top parabéns!
i love that knife, the blade shape and damascus lines, like a feather. i would like to have one like this, just perfect.
Master Knife maker!!!! beautiful Knife, BBP!! thanks for sharing.
Bravo - that hollow grind
Simply beautiful. A piece of art. Very well done !
stunning... you are one of the most talented people on CZcams
I don't often comment - but I must say that is one of the most beautiful knives you have made
I just love your art work, You are extremely talented. I am intrigued by metal work and especially knifes. Thanks
... knives*
The left side of the blade looks like a bird with an eye, extremely streamlined. Impressive pattern, and great craftsmanship as usual!
@Storm Lee That coffee etch really made it nicer with the extra contrast.
@Storm Lee Our stomachs are fine, they can tolerate the HCL we produce. As for who's idea it was, not sure I've seen so many people user it it's like asking who invented the wheel.
The superb craftsmanship is very worth watching. Damascus knives need responsible skills and artistic accomplishment, amazing work
Very beautiful work, thanks for sharing!
That's a piece of art
Beautiful knife my Friend ! Great job 👏👏👏 I'm a big fan of your work ' ✌️ from 🇺🇸 !
Oddly satisfying. Beautiful work
One of the most beautiful demascus and on of the coolest design I seen... beautiful work!🙏👍
Always a pleasure to watch you at work creating things of pure beauty.
Wow that’s cool
i stg this is pure asmr for handymen
Some of you ideas and methods are genius... the others are just awesome!
Tell him you want raindrop Damascus. Best pattern I've ever seen.
That’s a lovely piece of metal and a lovely dagger.
What a beautiful example of your work! Outstanding skills! 🤘
Damn... That was super cool. Great knife.
You are really good at free hand grinding. Wonderful work. I love the design.
This one looks absolutely amazing!
That's beautiful. Good work.
What a piece of art you making !!
Absolutely stunning knife dude. It must be very rewarding to make something that beautiful.
So excited to watch a truely master in Action thanks sharing
Looks amazing, that Damascus wave is mesmerising. Great handle too!
I made an epoxy resin trench knife inspired by your knife making videos , I cant explain how much I love your work, keep it up man big hug from Argentina.
VERY Nice 👊🏽💥💯... Love the way you darkened your Damascus pattern 👌🏽
Excellent work👍👍👍 . Thanks for sharing
Awesome video. Spectacular craftsmanship!
I've seen you make some really beautiful knives, but this one is my new favorite. Nice design.
Beautiful knife! Love that Damascus pattern!
What a beautiful knife. Amazing work!
Good Lord, that is a *beautiful* blade!
Beautiful work.
Absolute beauty of a blade!
My favorite knife design. Congrats dude.
As always absolutely awesome work. What a fantastic blade and Mr. Sperber did a fantastic job with the pattern weld. I would give almost anything to own that knife. Great video
Thank you very much ❤️
That's a beauty!!
превосходная работа)
Ахуительный нож
Russians.
Love the coffee etch
Thats one of my favorites!
Wonderful design and amazing job !!!
Now that is a knife! I really like this one, great look! Nicely Done!
VERY COOL KNIFE 🔥🔥🔥🔥
Wow cool
Gorgeous piece! And I love how you integrated the leather loop into the handle. Way nice looking that just a normal hole through the end.
Complimenti!!! Un'altra opera d'arte!!!😍😍
You knife maker make knife so darn beautiful like jewlry
Stunning!!
You make it look soooo easy! Very well done!!
Really wonderful!
Groovy build, man!
Do you know, I would just love to do that - make such a beautiful knife from scratch ...... I think I would wall mount it! ..... how ever, maybe in another life, and thank you for showing us!
He didnt make it from scratch he bought the damascus.?
That's a beautiful knife and excellent leather sheath
That knife is a beast!
Now the sheath
Now that's a sick looking knife!
What a beautiful knife!! Very nice!!
I would love to see a video for people who want to get into making knives, what is some basic equipment that we could use to start making knives?
Beautiful as always……you have inspired me….I am starting to gather some tools so I can try my hand at knife making. I have a lot of hand tools, and I am used to working with my hands, I make a living working with Air conditioning and Refrigeration……my biggest challenge will be grinding the bevels ……I’m not ready to purchase/ build a 2x72 yet, so I’m looking into other alternatives. Of course my first knife will be stock removal, and from there who knows! Thank you for the videos and the inspiration, keep up,the good work sir!!
Ooooo that knife looked MEAN!
I'd love to have this knife in my kitchen. Nice work.
Yasss an og knife video !!!
Hey what's up buddy I really like 👍 this knife 🔪 the way it looks nice job keep up the good work blessings
Great beautiful work n beautiful knife 🔪
Awesome!! Absolutely gorgeous work!!!
That beltgrinder must be awesome to use!,,,,,,,,,
Very nice. I particularly like the handle
Beautiful
I really love that blade🥺
Beautiful knife, both the blade itself and the handle is gorgeous!
Awesome as always I wish I had your talent and tools!👊👍😀