Common GM Vauxhall / Opel Corsa water leak from Coolant Flange / coolant temperature sensor housing

Sdílet
Vložit
  • čas přidán 12. 09. 2024
  • common Vauxhall Corsa coolant flange replacement

Komentáře • 36

  • @jonnycope231
    @jonnycope231 Před 3 lety +1

    Just binged loads of your vids. I used to be a mechanic then became a chef. Miss working in a garage

    • @ORileysAutos
      @ORileysAutos  Před 3 lety

      Thanks for watching

    • @seanwallace1972
      @seanwallace1972 Před 2 lety

      My daughter has a 2008 corsa D 1.2
      Loosing coolant how much would that job cost to have done?

    • @seanwallace1972
      @seanwallace1972 Před 2 lety

      Also if her car is leaking coolant through that part your removed would the coolant be noticeable like on floor etc,or does it disappear with in engine

  • @Symek92
    @Symek92 Před rokem +2

    Thanks for the video! This is exactly what I was looking for. I wasn't sure what is the part's name :)

  • @evieemaya88
    @evieemaya88 Před 3 lety +4

    Great video mate, keep the Corsa ones coming, just gave you a plug on the Corsa D forum 👍🏼. Can I ask how do you remove the coolant pipe attached at 8:04 ? Thanks

    • @ORileysAutos
      @ORileysAutos  Před 3 lety +2

      You just squeeze each side then pull off

  • @reliverecordsentertainment2020

    When replacing the gasket seal did you have to use any type of lubricants or grease ?

  • @safdarrizvi9885
    @safdarrizvi9885 Před měsícem

    I could smell coolant last night driving home.When i stopped the fan was running.On checking under the bonnet i could see steam coming from the coolant flange/housing.There was a small puddle of coolant on the floor.Its gonna need investigating but im sure this part now needs changing.

  • @6woody61
    @6woody61 Před rokem

    Just what i was looking for.thank you.all the best.

  • @jordanmizen7393
    @jordanmizen7393 Před 9 měsíci

    Do them coolant pipe clips just go back on how you took them off? Do I have to tighten them or they like sping back and tight it’s self

  • @netanel1014
    @netanel1014 Před 2 lety +1

    How you move the car computer (that is connect to battery house)? You're hold it at 4:33

  • @dazzahaywood3298
    @dazzahaywood3298 Před 10 měsíci +1

    I had mine done at a garage I think it's still leaking he put a plastic one back on mine but the one that was on was alloy. Don't think he used gasket sealer tho. Would it be best to take it back and ask him to use gasket sealer

    • @ollieguerrier
      @ollieguerrier Před 9 měsíci

      I have the same issue

    • @dazzahaywood3298
      @dazzahaywood3298 Před 9 měsíci

      @ollieguerrier have you replaced yours and still leakin I've read somewhere that using the cheap ones you'll end up havin the same problems.. think iam gonna get the vauxhall original from auto vox then pay someone else another £150 and take it kams.
      If you sort yours out please would ya let me know how and what part you use.

  • @joew961
    @joew961 Před 6 měsíci

    What was the tool used to remove the clamp on the water pipe?

  • @fsxelw
    @fsxelw Před 6 měsíci

    I just replaced mine but now it's leaking a little bit at the clip on the top for the small hose attached to the reservoir. Is that normal because there is still air inside?
    Edit: I also replaced the hose on top and now it's not leaking anymore

  • @giftzhou
    @giftzhou Před 9 dny

    What is the name of that gasket

  • @Rob-eg8qc
    @Rob-eg8qc Před 2 lety +1

    A12xer engine eats them things, am on my third one, saying that my corsa has done 188,000ish

  • @zzhughesd
    @zzhughesd Před 2 lety

    How do you bleed with the funnel please thanks. Need to bleed mine and don’t have a vacuum pump nor know how to use one. Thanks

    • @prawny12009
      @prawny12009 Před rokem

      Open the rad bleed, cover the over flow on the header then blow into the header until coolant comes out the radiator bleed.

  • @eltonmascarenhas570
    @eltonmascarenhas570 Před 3 lety

    Hello when putting the new gasket back do I need to apply sealant on it.

  • @andredompaul
    @andredompaul Před 2 lety

    What year

  • @adamzaydankhan
    @adamzaydankhan Před 3 lety

    Have you got a link were I can get the part from please my friend ? For example euro car parts

    • @ORileysAutos
      @ORileysAutos  Před 3 lety

      You just have to Google Corsa 1.2 coolant flange and a list will come up but I can't send a link as you would need to input your registration number to make sure you are getting the right one for your model

  • @benarchie21
    @benarchie21 Před 2 lety

    Mate I’m leaking coolant it’s going onto the front bumper guard can’t see any leaks can you help please 🙏

  • @cml1864
    @cml1864 Před 2 lety

    My corsa has the exact same hairline crack in the same spot on the flange 👀

  • @mqondisizuma1039
    @mqondisizuma1039 Před 2 lety

    Hellow, do you know why my car is overheating even after I have changed gasket and resurfaced cylinder head?

    • @ORileysAutos
      @ORileysAutos  Před 2 lety

      Did you change the thermostat and check is the impeller broken inside the water pump

    • @mgabrielle2343
      @mgabrielle2343 Před 2 lety +3

      I had a Corsa that was overheating, in the end changed water pump, thermostat, temperature sensor on the water pump or thermostat housing, my Corsa did not have a radiator temperature sensor, so nothing I did stopped overheating, then I put some strong liquid based soap for washing machines, made by Arial All in 1 , these are small detergent pods we usually just drop one small pod in our washing machine to wash our clothes, so i used just one pod in my filling bottle, topped up the water to the right level, it unblocked my front radiator and also it unblocked my internal heater Matric, the car is no longer overheating and internal Matrix now gives very nice warm air for winter driving. You can try dedicated radiator cleaning solution if you worried that this washing soap in liquid form may damage your engine, it cannot as washing machines have steel and aluminium parts as well as plastics and rubber hoses. This worked so well for me, the car is now like it never had any heating issues. After a few days drain this detergent mix and rinse the engine with clean water and finally refill with correct Anti-freeze as that also helps prevent corrosion.

  • @terzosaterzosa6620
    @terzosaterzosa6620 Před 2 lety

    Well Done

  • @alonsade9974
    @alonsade9974 Před rokem

    I have the Same problem with corsa e🤦‍♂️🤦‍♂️🤦‍♂️