Thank you for the video. I have one small semantic correction to make. Each "blank" key has a unique code, you don't actually "program" de fob key, but the ECU by letting it learn the new key which will be added to the allow list of codes stored inside the ECU.
i have the same bike with you and today when i progamming the new key i lost the programming of the old the black not the red.and this goes aroun when i put a key i am losing the other.and now i have 2 keys only.any idea for the problem?
I have an Fjr1300 2005 Gen1 lost the key today so will order a blank key with chip. I have the red key and one black key. Will doing this change the code so the lost key won't work if found but how do I program both keys
Hi there mate ! Could I just check if this would work with a blank key with transponder bought of eBay or do I have to program the blank key before applying your steps as shown in the video. Thanks
doesn't work for 2015 r1... unless I'm an idiot, but watched this video, reviewed instructions and tried several times. could be the process has changed in new bikes, or my ecu is fucked from when thieves some the bike the managed to hack the ecu to register their black key WITHOUT having the red key (which I possessed the whole time). They have somehow unregistered my old black keys, but my original red still works. however I can't re-register my black's following these instructions
Alot of the current Yamahas use the same key. I drive the MT07 and an XSR700. They both use the same key as the R1/R6... Should you get your key and chip seperately, you need a 4D-69 chip/transponder.
Hey bro, I got exactly the same problem, may I ask you one thing? When I let the blank key cut, do I only need to let the key cut? Or does the Transponder inside the key also have to be copied before the steps in this video are taken?
I’ve followed each step of your instruction but it didn’t work on my 2006 R6. I’ve bought the transponder with the chip (as described by the seller) how can I see if the chip is there?
Wish I had known about this system before I bought the bike. Expensive pain in the ass. Feeling screwed by dealer who didn't reveal upfront that they only had one key.
Hi there, do you have any idea on how to open the key? I got a key and the transponder seperately, wondering on how to open the thing without damaging it... Thanks a lot in advance!
Marcin Stolz you’ll need to use a very thin flat screw driver or a stanly blade type of tool to pry out the old dummy chip and replace it with the new one.
@@azzkam8972 Thanks mate, however, I've already managed to do it with a swiss knife. Unfortunately the opening is complely obliterated by now, I'll order one more (the're ~2 USD on Aliexpress).
@@marcinstolz1763 Did you order on Ali? If you already have the good links I would greatly appreciate :D I did not understand if the blank transponders are any good if you have the red key. 4D-69 is cheap on Ali, but they say it's blank and still need to go to a locksmith.
@@vegancorrxyz Well, i've got the transponder from a local reseller, ordered one on ali, but it did not come... A locksmith cut the key, it turns, but there is no way i can manage the shown method of coding the key... I will try to do it at a locksmith maybe.
All my keys work but the immobiliser light still flashes all the time even when the bike is off, what can I do to sort this or is it meant to flash always I've got a mt03 660 2006
Merhaba, boş anahtarı nerden buldunuz ? Ben çinden aldım ama plastik kısmın içinde çip yok sanırım onun için kopyalayamadı, oraya bir çip koymam gerekiyor sanırım ekstra alıp ?
Hey, i cant find any transponders for the Yamaha XJ6 Diversion (r19). can i just program it myself or how am I supposed to insert it into the key. Thanks in regards
Hey works great Thanks. However, when I program the new key the original no longer works! I want to have a spare - how do program multiple spare keys at once? Thanks
could you please send the link to the key you got? I can only find keys without the chip in them. or could u send me a link to where I can get the chip
Hi, i have this funny thing going on with my immobilzer (R1 2004). When i put the key in. Same with both black and red key, the red light stays on. Can still start the bike fine. Light stays steady on for the whole ride. Red light works as normal when removing the keys. Flashes the way it should. What can be wrong you think?
@Solar Group Yes, the authorized dealer told me he programmed it away. But frankly, i dont trust him a bit. He told me that the immobilzer was now working fine except for the light, but that i will try now next month when season starts since i barely got with me the the old key since he again told me he swapped the Cpu. I havent yet followed more up on this, since this was at end of last season. I have another case going related to this. Bike was registered as reduced 106hk bike (EU thing from way back) and he reprogrammed it to full power, but i need dealers papers from Yamaha to get it registered as full power
hi, my friends R6 is bought with only a key, not a master key (red one). Can i copy the code to the new blank key with just old key (not master key) for his R6?
Hi. I have this problem with my Yamaha Xt 660 x, not sure if it's gonna work on this bike. But my problem is that my both my Black Keys got degaussed, and i dont have the master key. Do you have any idea how to fix this cheepest way?
if I have the original Red Key, original black Key, original ECU but installed a NEW ignition barrel, is there a way to make this work somehow? Only the ignition barrel was taken from my bike and I have everything else original left... I'm hoping not to have to get the new ECU with new ignition barrel
FJR1300 - 04 I have replaced the old switch with a new ignition switch with red key. Bike cant start, of course. How do I match this new ignition switch to the transponder?
Hello, is it possible to program fresh key with new transponder by myself (Yamaha FZ6)? I have 2 original keys (1 red and 1 black). I've just bought blank key and transponder 4D69. When I try to code new key it constantly shows me an 52 error code. When I'm programming original black key there is no problem.
That 52 error happened with me when i programed my new black key. After this, the old key was not recognized and the red light started blinking. I started the procedure step by step and in that 5 seconds window, i put the two black keys, old and new and it was ok.
Hi mine is a tricity yamaha no problem with ignition, the remote opener of keyhole cover doesn't work, will appreciate if anybody can share how to reset reactivate the remote, thanks
Thank you for the video. I have one small semantic correction to make. Each "blank" key has a unique code, you don't actually "program" de fob key, but the ECU by letting it learn the new key which will be added to the allow list of codes stored inside the ECU.
Thanks for the explanation on how to program a key . It was great ! I did it first shot on a 2016 FJR 1300 ES
Thank you so much ! It worked perfecty on Tracer 7 2020. You saved me from spending a lot of money and time !
Perfect, just sorted a spare key for a 2020 tracer 900 GT and this is still valid👍
Thanks man.
Without the "Bismillah" it wouldnt start at the end 😂
No joke nice Video Tanks.
Thank you so much!! It worked on my Yamaha MT07 2015! You saved me a lot of money!!
Best part in the video.. with the new key inn .. BISMILLAH!! And the bike roars 2 life..
Subhanallahhhhh!!
You just saved me £55!
Alhomdolillah!
UK Citizen im glad this helped alhamdulillah
Gotta love British humor 😆😂😂
Thank you. This worked perfectly when programming a new key for my 2005 TDM 900.
Can confirm this works on Yamaha Bolt r-spec. Cheers man, ya legend!
Great tutorial and it worked fine with my 2005 Fazer. Thank you so much!
Excellent explanation, short and clear! Worked on my xmax 125cc '2007! You save me 80e :) Tnx
Worked a treat on my 2015 MT09. Different display but same procedure. Thanks bud!
i have the same bike with you and today when i progamming the new key i lost the programming of the old the black not the red.and this goes aroun when i put a key i am losing the other.and now i have 2 keys only.any idea for the problem?
worked on my 2016 fz09.. thank you!
Worked even on my X-Max, thanks a lot!
Thanks mate 2022 FJR 1300 key sorted
Spot on just got my FJR 1300 going first time thank you Azz
I have an Fjr1300 2005 Gen1 lost the key today so will order a blank key with chip. I have the red key and one black key. Will doing this change the code so the lost key won't work if found but how do I program both keys
This worked. Thanks a lot! (Yamaha VStar XVS650A - 2016)
Thanks a lot, baraka laho fik
Thanks Azz that has answered my question in your other video.Cheers. Rob.
Thanks, worked perfectly for my Yamaha MT-03!
Thanks for the video! I've just programmed 2 new keys for my 2011 XJ6.
every time i program 1 new key the original spare black loses it connection ,how
do i do both keys
@@twistedthrottle8513 I have the same problem did you figure out the answer ?
Hi there mate ! Could I just check if this would work with a blank key with transponder bought of eBay or do I have to program the blank key before applying your steps as shown in the video. Thanks
Excellent video
doesn't work for 2015 r1... unless I'm an idiot, but watched this video, reviewed instructions and tried several times. could be the process has changed in new bikes, or my ecu is fucked from when thieves some the bike the managed to hack the ecu to register their black key WITHOUT having the red key (which I possessed the whole time).
They have somehow unregistered my old black keys, but my original red still works. however I can't re-register my black's following these instructions
Alot of the current Yamahas use the same key. I drive the MT07 and an XSR700. They both use the same key as the R1/R6...
Should you get your key and chip seperately, you need a 4D-69 chip/transponder.
chip from yamaha mt 07 = 4 D 69 doubt
masyaAllah...thanx from xj6 diversion malaysia
Yamaha TMAX 2013 it worked, thanks
Yes you need the key with the transponder chip in it.
_Dokladnie tak samo myślę Panie Radku. Pozdrawiam serdecznie 👋_
Hey bro, I got exactly the same problem, may I ask you one thing? When I let the blank key cut, do I only need to let the key cut? Or does the Transponder inside the key also have to be copied before the steps in this video are taken?
Yes, it really works in my 2006 Yamaha R1 (european versión). Thanks!!!!!
Got my bike earlier this summer and with one black key only. 😢 And to top it off the lock is really struggling.
thanks...it worked on a 2022 tracer7...but only could code one black key...the other black doesn't...Thank you.
Gonne try this tomorrow
thanks for the video bro, just did this and it worked.
Muito obrigado pelo vídeo, nos ajudou aqui no Brasil.
Thanks worked perfectly.
Thanks for the video Azz.
I’ve followed each step of your instruction but it didn’t work on my 2006 R6. I’ve bought the transponder with the chip (as described by the seller) how can I see if the chip is there?
Thanx, dude! Was helpful!
Dude does that only work for Yamaha ? I have a 2016 street triple r …that’s awesome 👍🏼👍🏼👍🏼👍🏼👍🏼
Thanks for the video dude 👍🏼
Thanks a stack for this!
Wish I had known about this system before I bought the bike. Expensive pain in the ass. Feeling screwed by dealer who didn't reveal upfront that they only had one key.
thanks a lot it works r1 2008
worked fz6n s2 2009! ty
Massive respect thankyou
If you want to code more than one key you need to do both keys within 5 seconds (switch on and off than next key switch on and off)
Tks! And it's work !😊
Excellent.... thanks very much !!
PS... where did you get your key to programme please...??
You can try to buy the transponder chip separately and insert it into the blank key
There should be pre cut slot for the chip.
Hi there, do you have any idea on how to open the key? I got a key and the transponder seperately, wondering on how to open the thing without damaging it...
Thanks a lot in advance!
Marcin Stolz you’ll need to use a very thin flat screw driver or a stanly blade type of tool to pry out the old dummy chip and replace it with the new one.
@@azzkam8972 Thanks mate, however, I've already managed to do it with a swiss knife. Unfortunately the opening is complely obliterated by now, I'll order one more (the're ~2 USD on Aliexpress).
@@marcinstolz1763 Did you order on Ali? If you already have the good links I would greatly appreciate :D I did not understand if the blank transponders are any good if you have the red key. 4D-69 is cheap on Ali, but they say it's blank and still need to go to a locksmith.
@@vegancorrxyz Well, i've got the transponder from a local reseller, ordered one on ali, but it did not come... A locksmith cut the key, it turns, but there is no way i can manage the shown method of coding the key... I will try to do it at a locksmith maybe.
It work! But it only registered to one key only. How to register the second key? Thanks
Nice job Thanks alot dear brother keep it up...
Maa shaa' Allaah brother :D
can you do this with only a black key ?
looking at a crashed bike to build as a track bike ,only has one key with it !
Im buying a R1 as such legal, but the red key has been lost. i know you said expensive, how much roughly u think ? Cheers
Thank you very much bro
All my keys work but the immobiliser light still flashes all the time even when the bike is off, what can I do to sort this or is it meant to flash always I've got a mt03 660 2006
I dont have this red master key. But I have a key that it works. Will it be posible to make a new one?
Very nice, bismllah!
Thanks for your information brother
ADAMSIN ADAM!!!
Merhaba, boş anahtarı nerden buldunuz ? Ben çinden aldım ama plastik kısmın içinde çip yok sanırım onun için kopyalayamadı, oraya bir çip koymam gerekiyor sanırım ekstra alıp ?
Bought a Yamaha R1 2008 without a red key and the ignition switch is pain in the butt to start the bike, and solution here?
I would like to ask a question, I lost the red key of my tmax, how can I make a key to replace or make a black one
Sr400 2010 success
Hey man. Can u help me, I have yamaha r6. How to do this thing ? Because on my meter Yamaha r6 don’t have that red blink light. Yamaha r6 2013
Hey, i cant find any transponders for the Yamaha XJ6 Diversion (r19).
can i just program it myself or how am I supposed to insert it into the key. Thanks in regards
Hey works great Thanks. However, when I program the new key the original no longer works! I want to have a spare - how do program multiple spare keys at once?
Thanks
How can I program more that one key ? (When a new key is reprogramed the old one is No longer working)
I have the cheap replacement key from ebay ,do i also need some kind of chip also?
could you please send the link to the key you got? I can only find keys without the chip in them. or could u send me a link to where I can get the chip
Hi, i have this funny thing going on with my immobilzer (R1 2004). When i put the key in. Same with both black and red key, the red light stays on. Can still start the bike fine. Light stays steady on for the whole ride. Red light works as normal when removing the keys. Flashes the way it should. What can be wrong you think?
@Solar Group Yes, the authorized dealer told me he programmed it away. But frankly, i dont trust him a bit. He told me that the immobilzer was now working fine except for the light, but that i will try now next month when season starts since i barely got with me the the old key since he again told me he swapped the Cpu. I havent yet followed more up on this, since this was at end of last season. I have another case going related to this. Bike was registered as reduced 106hk bike (EU thing from way back) and he reprogrammed it to full power, but i need dealers papers from Yamaha to get it registered as full power
hi, my friends R6 is bought with only a key, not a master key (red one). Can i copy the code to the new blank key with just old key (not master key) for his R6?
Thanks alot!
Nice Mashallah 😊
I got code 51 have red and black key but bike wont start when i put red key or black, any help ???
Hi.
I have this problem with my Yamaha Xt 660 x, not sure if it's gonna work on this bike.
But my problem is that my both my Black Keys got degaussed, and i dont have the master key.
Do you have any idea how to fix this cheepest way?
Jon Henrik Larsen sorry I don’t know how to do it without the master key you may have to go to the dealership
Is there a way to clear programmed keys? Ie if you lose a key clear it and reprogram your spare again.
jontw007 to clear a coded key you’ll need a key programmer machine
I have lost red key.. wt to do...??
Same here... what did you do??
Where can I get the chip for this kind of keys ?
Hi! I tried it more then twice, but doesn't work. Error code 51 after put in the blank key. Any ideas?(2005 FZ6)
Working On Yamaha X Max!!!
thanks man
2:40
if I have the original Red Key, original black Key, original ECU but installed a NEW ignition barrel, is there a way to make this work somehow? Only the ignition barrel was taken from my bike and I have everything else original left... I'm hoping not to have to get the new ECU with new ignition barrel
Try it hopefully it’ll work
I’ve changed just my barrel on my R6 and it worked fine didn’t have to change anything else
Hello, do u by any chance know how to program suzuki gsxr keys ? I know honda and Yamaha but dont know kawasaki and suzuki
No sorry
FJR1300 - 04 I have replaced the old switch with a new ignition switch with red key. Bike cant start, of course. How do I match this new ignition switch to the transponder?
korigang you’ll most likely need a key programmer for that.
@@azzkam8972 ...and that I would find at a yamaha dealer - or..?
korigang or a good key cutting shop should be able to program your key to your ignition
Hi
When i bought the bike he gave me Onley 1 black and i bought 1 blank key and i cut it can i do this with my black one as well ?? Thanks
Sam Bod unfortunately not but it's worth a try.
How to program two black keys?
Any tips on gsxr?
Hello, is it possible to program fresh key with new transponder by myself (Yamaha FZ6)? I have 2 original keys (1 red and 1 black). I've just bought blank key and transponder 4D69. When I try to code new key it constantly shows me an 52 error code. When I'm programming original black key there is no problem.
That 52 error happened with me when i programed my new black key. After this, the old key was not recognized and the red light started blinking. I started the procedure step by step and in that 5 seconds window, i put the two black keys, old and new and it was ok.
Hi mate, what to do if my red key is lost?
الله يحفظك شكرا
I don't have master key. What are my options
Merci
Has anyone tried on 3 keys successfully? I've tried 2 with success but no luck on the 3rd piece.
Hi, does this works on yamaha xmax ?
Bro i need bike key for Yamaha r6 2005 does it gonna work
Hi mine is a tricity yamaha no problem with ignition, the remote opener of keyhole cover doesn't work, will appreciate if anybody can share how to reset reactivate the remote, thanks
Hi Azz!! Does it works with the new Yamaha R6 2017? Thanks a lot!!!
poderosov8 not sure mate but it’s worth a try
Yep, im gonna try!!!
Just bought a Yamaha, and the guy only give me a black key, so can I programming the a new one with the black key?
Thx
philip L you need the master key to program a new key and that is usually red.
My problem is i don't have the master key, just wondering can I use my black key to copy one more for spare?
philip L you can if you have a key coding machine or just take it to a key cutting shop they’ll be able to copy your key and the chip.
Cheers
Hi!!! Does anyone knows if this works for Tmax 500 as well??? Cheers!!!