REBUILDING A WRECKED AUDI RS7 THAT I BOUGHT BY ACCIDENT! | PART 4 I HATE AUDI NOW!
Vložit
- čas přidán 22. 07. 2023
- $37,000 takes this 2016 audi rs7 home as is! 1 week DEAL! (I may have bought something very expensive...)
Email me at crf100tim@yahoo.com if you're a serious buyer cash ready, i can organize shipping anywhere in US.
Drop a comment with your thoughts and ideas!
Drop a like if you enjoyed todays video!
Dont forget to subscribe!
Follow me on instagram @BYBTIM
Follow me on Facebook (Backyardboyz)
Business: backyardboyz@retromgmt.org - Auta a dopravní prostředky
Drop a like or your car might get all these fault codes 😭
Lol
lol
His soul was crushed after the first sensor fail you could see it in his eyes.
@BackYardBoyz former Audi master tech here. just have the rack programmed. performed the steering angle sensor calibration and have the ACC sensors calibrated. most likely all of your restricted function faults are stored due these three issues. they store because they are not reading the correct messages from those systems. also, you will need to have the calibration done by a shop that has the target boards for the vehicle. the Audi dealer will be the most expensive option for the calibration probably between 800 to 1600 for the calibration, but there are also mobile calibration companies that can come to you and do the calibration much cheaper than the dealer, around 300 to 500 for the calibration.
Been driving my 18 year old car with engine and airbag and injector lights for 6 years with no problems, i took a road 3000 mile trip and the only problem was a leaking radiator got it sorted and made it home 😅
Great content South Africa is watching salute
🙏 thank you
🇿🇦 🫡
Salute grootman🙌🏽🙏🏽
I'm in South Africa too❤
Ntwana yami
Don't you just love people who have a natural smile on their face even when delivering bad news
Love you being honest with everything about your rebuilds, many would have hidden the problems they have fixing the car. Great content
I love Tim's reactions when he finally figures out a fault code.
Tim, dude, so sorry for the cost your out. I'm trying to decide if I ever want to try and get a car from Copart or some place to fix and keep as my daily. The bad and good information you pass is truly priceless to me. Keep up the good work and info. Best of luck from this point on with this build.
Yes Tim. BYB did it again. Phenomenal progress. RS7 looking great. U.K. so pleased for you. CZcamss best channel. 🇬🇧
Brilliant Tim loved every minute of that, it’s almost there man!, hard work wins every time, they’re expensive cars to repair 👍🇮🇪
Tim you are such a good person for some reason your videos get me hooked more then any other car CZcamsrs shoutout from Toronto
@BackYardBoyz until you get your shop, can you invest in a quick jack
Love your content, Tim! Keep up the good work, kudos from Lithuania! 🙏
Tim , your channels been one of my favorites since the beginning.I prefer your style now since your Florida move.Its more involved in showing all the fixes.The old videos were in hyper time lol I enjoyed them but missed alot .
Well, it isn’t really surprising that an Audi RS7 is expensive to fix. It’s a high-priced and premium sports car.
As always another great vid,I think your in the right location for spares unlike in the UK Wales lol.
Keep the great content coming 👌
Another great repair video. Have you ever thought about purchasing that full car lifting jack.
Rs7 is my dream car, yours in an exact spec im looking for. The only problem is I live in UK :
You are a natural in front of the camera. Like the balance of content including seeing a bit of Florida.
Great content as always, much love from South Africa
Quite the emotional rollercoaster for you 😀😀 glad it worked out
I always have a lot of good luck with those small little mom and pop stores hundred percent from doing paint work tire work you name it
Master piece! New to world of cars, learns alot from u !
Easy to calibrate ride hight through Autel scanner measure from center of the wheel to the fender add the actual value by millimeter and the scanner will replace with standard measurement hope it help
Master piece Tim, love u from Germany 🇩🇪
You used a triple square to loosen the bolts to the joint. Not a torx
Congratulations 4 the tenacity and patient
Good job, A big fan from Iraq 🇮🇶
Watching u since 2019 keep up bro 🙌🏼
Looks awesome fantastic fabulous work on those Audi RS7
👍👍👍 please do more content for this platform 4.0tt , very helpful 💪💪👍
The Next One is the best One
BYB ❤
Great Vid the school of reality when working on these cars. It could be nothing or everything when it comes to audi.
terrific job ! hopefully a person close the deal
40k for that car is a fricking steal 🔥🔥
Hey Tim. Im rebuilding a MB AMG 45 in Guatemala. Main issue, no parts available locally. Any idea where I can find find parts for de CLA AMG (same parts for front end) in Florida?
I really love your channel❤️❤️❤️❤️
Damn Tim your vids are absolutely top notch, makes my day when you post, much love from an aging UK fan 👌
Thank you!
That small tire shop came in clutch.
You are the best on this bro 🎉
I’m visiting Tampa for the weekend was hoping to c the car in person driving by lol
Love the content bro
U make it look simple south Africa approves
Love your content all way from the UK
U get me cuzzy!
Amsterdam is watching you😜great content Tim🫶🏻
Love the videos : ) All the way from Sri Lanka
I love the colours is exactly same as my golf gtd
Can’t wait to get a 2017 RS7
Great content all the way from South Africa
Being there, I know the feeling of loosing the profits to unforseen issues, IT SUCKS!
On the other hand, please be careful when lifting any car, you can never be to safe, shove the removed tires underneath it, is a LIFE SAVER extra safety measure, some jackstands fail once in a while and the tire will take on the weight of the car if that happens.
Thanks for the videos, love the content!
100%
@@BackYardBoyz next time use the spare bent wheel :D
implausibe message means that ECUs are getting implausible CAN or Flexray message(s) from the other ECUs.
Great video that Audi is sick
Recheck all fuses and do they right A , and check do in empty slots should be fuse
2:30 this is why we like your vids
Bro I’ll be in Tampa 8/6, you gotta respond so i can meet you my guy. Big fan of your work bro
U" codes are usually small discrepancies in network communication caused by another fault. Not something you should really be alarmed about so, its ok to clear to code. So fix it all and the code will go away.
That rim, in Guyana 🇬🇾 South America, we can fix it. I’m new subscriber based in South America love cars especially the TRD Gen 4Runners.
Great video man! Congrats! Where is the lambo?
how does the white seats in the tesla rental look now ?
Awesome bro
Greetings from Costa Rica 🇨🇷
I am waiting when you rebuilt a supercar like ferrari
Great video my guy! Go back to the body shop and have them re spray the bumper, the color doesn’t match 😤
Good job, but why didn't you repair the front bumper? Welding it would save you a lot of money.
You should have just repaired the Bend at a shop. And I suggest you get a VagCom. Audi has to many modules.
Great Video.
I can see how a Honda Civic and an RS7 can be mistaken. No worries, you got a better car.
Where can I buy the scanner and dose it also work for trucks?
Beautiful car
It has something to do with the airbags fault code .. should go away after airbag is swapped
bro got patience ngl have to respect it still
great job.
Hey buddy do have dealership licenses for purchase car at the auction or don’t need it ? Please let me know
Alignment of the wheels. Right after you need to do ADAS calibration. ( radar, camera, cruisecontrol etc.. ) Good job
Imagine the weather in my country is twice the cot of where you staying 130 f
Watching from Istanbul❤
You are loved here in Namibia. Africa
You should try buying a different type of car next time like a Porsche which would be fun to watch
44 with salvage title record, good luck with that lmao
Why in the world didn't you start with the right part from the beginning?
And the steering rack needs to be coded. 😊
Can you drop link for those gloves @ 3:55
Sheesh you took a hug cut in profit with this one! 😢
All them codes for control error will be in every control unit due to steering rack not being coded in once that is done all codes will clear
Florida weather
Omg
Wrong coding in any module could produce this error codes.
The airsuspension module wait for response of a module that doesnt answer.
You have to code the whole car correctly.
Hope this works.👍
are familiar with coding modules for the steering rack?
Yesterday was 119° here
Are you a one man show? Like you do the videoing editing ect? If so man you are incredibly talented, your videos are awesome. Hope you are enjoying Florida it’s been super Smokey in the PNW.
Yes 1 man army right now
Tbh when you showed the sensor I saw the differences
What model autel you use?
Luke Belmar - A glitch in the matrix
LOL, you will never let the car working without removing component protection with Odis on your steering rack! And you can't mismatch parts with different code.
I forgot about removing component protection. You’re saying all those codes are from component protection?
@@BackYardBoyz maybe he's right and it makes sense. in my A5 I had the same error in practically all modules until I removed the component from the new part at the Audi dealership. regarding VAG group part numbers the first 3 digits refer to the chassis for which the part was made. sometimes they are compatible. The letter at the end of the part number is also important BUT they can indicate different variations of the part's functions or, as you thought, a revision. Regarding component protection, you pay for this to be done. do not rely on licenses purchased online for ODIS. Many of them are scams.
37 grand for that car is a bargain dude, great job.
Приветствую Тим как ссегда все супер интересно👍
Please which state are located
why don't you check Samcrac for help, he is in Tampa?
Hola saludos desde CDMX de 🇲🇽👍🤟😎🤞
reach out to Kota Performance out of long island... He is the 👑 for rs7, s7 and A7... Good luck with the build! Awesome videos
In the near future people are going to find a Audi like that at a what ever car dealership. But it because the price isn't that expensive and now they can look like they have lots of money and are rich. Not realizing you kinda do need to be to drive it out of warranty! The people who buy them brand new get rid of them when the warranty is over because they know with maintenance and repair it doesn't make sense to keep it and buy another brand new one with a warranty! 🤔
Nice
❤
Genio!
Hello 👋
BMW ZM3 clown shoe is the coupe not the soft top 😊