The proper way to service the trans is. Fill it up until it starts leaking
Then start the car up, get the trans up to temp
Then go fill the trans more while the car is running and trans is warm. You’ll be able to add another qrt or so.
In 8HP55 you need to fill it until starts to leek, then start car, shift for all gears, then before reaching 40 degrees fill until it will leak. :)
Final fill is done with engine running transmission fluid temp between 40-50 degree Celsius .
I was going to say exactly this. The engine should be on after it starts to overflow and you shift all the gears. It needs to be below a certain temp as well.
Advice of the new shop. I have looked at all the prints. Just make sure your kitchen. Sink has a window and is on the exterior wall. Take your shop space. And install a crane right off the ibeams. Also make sure your drain system is on point and can not fail. Pre plan for where your putting your lift so you can have the cement poured properly when they do the foundation. And you won’t have to install footers afterwards. Make sure your going to have drop downs for power. Look at it like a life time shop.
I am really happy that you have been uploading consistently for a while now , been watching since the M2 build. You look genuinely happy and this makes the content even better. Excited for the shop build and keep it detailed for us who are in the progress of building our own shops. Definitely one of the best automotive YTs right now. Keep it up, Tim !
Bring it on, Backyard Property Brothers...boys! 😀 No really, checking out the progress of the build will be a nice addition to the channel.
I'm literally at a loss for words right now. Your build projects and videos keep getting better and better. BYB for the win any day!!
Congratulations bro. Love your content. Your shop will be a great success!❤
Congrats Tim been watching since the early days and really do happy that youve finally secured land to build your own shop. Keep it coming and i'll be watching 👍🏾
This is great....Happy for u bro....can't wait to see the process....its a beautiful thing building a new structure...I love it...Best feeling ever!!!! Make some good memories while u're at it 😊...u will cherish it.
Congratulations on your new shop coming through and I enjoy your videos so much. keep growing and stay humble the same way you were since day one
Congrats on the new space for your shop Tim!!! Definitely will love following the progress
Well deserved - young guy living the dream 🤘
Good luck , I’m excited to see your progress in life man. Always good content 👍🏻😎🇺🇸
There is a very specific drain/fill process for the ZF8HP, you should probably change the pan as well bc its the filter for the transmission. they are absolutely bulletproof though so im sure she's fine!
@@vytautasminalga3905 and he already changed it in the first videos if not mistaken
TIM I’m so happy for you man so happy that this channel is going this far down ❤❤
Ayoo you guys remind me of hanging out with the boys. Best times. Keep doing y’all thing💪🏽
Hey tim, You must flash the gearbox with xHP flashtool afterwards… it has an option named “True manual” and it allows you to hit the rev limiter, with this mode the transmission will not up-shift automatically when it reaches certain RPM when you are on “Manual mode” thank me later! 😁👍🏻
New video so early in the morning, good way to get my day started
Big up the backyard boys can’t wait to see the build 👍
Yeah , byb2.0 in tha making !!!
Good thing to step up Tim 👍👍
Definitely looking forward to see the shop build series 💪🏽🙏🏼🙌🏼
Great news on your shop build, looking forward to seeing that coming together.
Definitely want to see the shop build process.
Congratulations on the shop, you deserve it my guy, one of my favorite videos!!! 👏👏👏
I have a really old car that has a lot of problems (passenger window and lock doesnt work, few dents, hoop paint coming off, windshield wipers are very loud, cruise control doesn't work and much more...) and watching your videos give me a lot of hope that one day I will tackle every issue one by one. I have zero experience with cars but I'd love to try and learn.
As a guy who has built three houses from scratch, please visit the site every few days so you can check what has been completed and how the quality of the work is being delivered. Just remember changes not on the blueprints can be costly. I love your dedication to the channel and the content. You never give up and the final product is always worth the wait! Good luck with your new endeavor and continued success in the future!👍🏽😘🎉
Looking forward to go to this next chapter with you Tim, it's been a long time coming # new shop.
Congrats bro! Definitely would be interesting to see the building process
Yes!.. we have got a property,this is so good. You have to think twice on building just make sure everything is in other...❤
Always got the best content bro keep it up !!!
Good job Tim I will like to see the building project finished on your channel it’s gonna be hard but you got this good luck❤
Congratulations on the new shop let's go this is gonna be an amazing shop build & all the mystery hidden Compartments. thanks for the amazing videos and once again congratulations
Definitely want to see the shop build process.Congratulations bro
Nice🔥🔥🔥, I was about to say should have filled it when it was on but you eventually did that 🤣. Good stuff ‼️
Yes please vlog the whole building process!
Congratulations on the shop! Love the content and bring on the shop build!
We were all happy after TIM and JESUS CHRIST repaired the rudder. Greetings from Peru
Congratz dude. vlog everything it's looking good. Im glad for you.
I´ve followed you since the cold backyard days in the north and i think you´ve had like 30k sub then. I am so glad you´re back with "same" content and skills. A shop does´nt make a star imho. Love from Sweden!
Can't wait to see the shop build content!
Bravo Tim. I know you can do it. Cheers from sunny Spain😊😊😊😊😊
BYB Making Moves.
Well Done TIM.
Video made my day, waiting on my 2024 m340 to come in and it’s been in “Ready for Transport” for a month and 4 days 😤waiting sucks
@MyTELE-GRAMNAMEBackyardboyz2 Mine actually is now on a boat in Tampa rn!!! Then Baltimore, than New Jersey and that’s where it will b taken to NY for me
Happy about the new shop 🎉
Hey Tim it's me your friend Baz from Canada I watch your contents and I loved it I always love what you do by the way I would like congrats you for the new shop Go ahead I personally adore you to do that It's really good idea and trust me You will not regret that move Trust me God bless you and God always be with you congratulations again Cheers
Lamborghini build will be awesome can't wait 😊
I love how funny the videos are now haha. You guys are hilarious. I love it
Man I think Tim is the only one who full sends his builds😂 Those donuts and burnies were excellent
Must also fill it up while the engine is running. Then you go through the gears
BYB Fam getting big and better day by day
Congrats bro so happy for this!!!!
you need a peristaltic pump for your side fill transmissions. they are awesome reversable and most run on a variety of voltage i use a porter cable battery on mine my e93 is so easy to refill the trans
i’m hyped for the build
Nice Tim. Hope the shop s everything you want it to be.
Moving up...Love it...Keep going Tim
Boss transmission oil level needs to be checked on the running engine, transmission temperature should be 40 Celsius. Connect the computer and check the temperature, after that very important you need to reset the transmission adaptations and values. If you will not do this the transmission will not go back to the normal values because they are saved for long periods of time.
Warm up engine along with the transmission until they both reach operating temperature, then shift all levels with a 5 seconds waiting time between every level, then go under the car and do the (warm refill)
Because for theses transmissions there are two steps to refill , one is cold refill which takes 3.5 to 4 quarts and the warm refill would take around 1.5 quart. This is required when changing the whole fluid, but in your case do the warm refill step.
I'd definitely like to see the building process Tim
Suggestion; go two stories with the build and that way you can have a big patio are over the shop portion and it'll be A LOT quieter in the house part.
Tim.. top up the transmission fluid while the car is running..shift through gears, and that's when you would get the transmission fully topped up..
Build vlog would be great! I would put a mezzanine in overlooking the workshop area and you could have an office/gaming/chill out area on the mezzanine..
I hope you do an amazing build series on the shop! I support!
Bro please VLOG the whole build for the building. Will be so fire
When your checking trans fluid is usually needs to be running and hot to get a accurate reading
Congratulations on the new garage site. Well deserved
Top job guys, bring on the shop build!, will be amazing👍🇮🇪
happy that you are getting a shop
For bmw trans fluid level need to do this!
Car level
Engine on
Car fully warmed up to temp
Then pull fill bolt and fill until it overflows out then test drive!
You have a scanner hop on it and it should have a trans temp live data menu in the transmission module!
That’s a great accomplishment!! Congrats Man!! Only Up from here
Haha you always crack me up. Your really good at driving that car!
Let’s go!!! Let’s see those construction vlogs
Go for it man if you put your mind to it you can do anything
I wanna see the shop being built, I love that sorta stuff
That shop /house is going to be wicked nice and so very functional way to go guys I wish you a the best of luck and you do a amazing job on those cars you got and wish I had the giveaway car I've had so much trouble with cars lately its unreal 4 vehicles in 3 months amd I've owned each one for a little bit over 2 years
Congratulations and can't wait to watch
DEFINITELY Vlog the shop build!!!
I love your work and boldness, rock on
Good luck to you mate.. you deserve it you work hard.. 👌👌
Usually you check level car hot and running take level plug out and refill if no fluid comes out
You need to figure out the land if you can mix Commerical with Resentidal
Congrats for new project for workshop!
This mercedes actually looks clean. It's crazy!!!
That was clean af at the end with the E63s
I don’t know how you doing men, but I love all love you put into rebuilt a car
The whole knocking you had is from the torque converter when it’s low it does that
You must fill it up with a running engine because then is transmission oil pump is running, go to all the gears 20 sec each
wanna add, when filling a trans (auto) fill when cold, let it start dripping. get it upto temp, then fill until its leaking again. add the cap and your done. its more so about the fluids going thru lines/coolers and such. you always "check" an automatics trans fluid levels when the trans is upto temp. anyways, ZF FTW! 5sp swapped my e46 a while back with a getrag. major mistake in a 330ci. now has a getrag 320zf couldn be happier (lied) boost!!!!!
Yoh. Finally. Ke neng ke emme
That call out bruh🐐
Would you rather keep rs7 or E Amg? which one’s better in ur opinion
BackYardBuilderz hell yeah!
Dang, now I'm going to have to play Need for Speed. I need some drifting time. 😂
And congratulation for new shop
It would be cool to see videos of your shop build.
Recalibrate ? LOL Congratulations on getting the new shop.
Congratulations!!
Hey Tim I love all your builds I’d love to own that Mercedes it’s an animal! The plans your intending to do for the new shop etc would be very interesting ❤ have you any idea what car your gonna do next after the bmw??
Literally, in the transmission are like 9,35 liters of oil, if you drained it all, you have to put back in that amount of oil, because 3 liters or 3,35 will be in the torque converter, so thats why you have to put in the gearbox a lot of oil.
Been waiting for the video😂
ZF TRANSMISSION FOR THE WIN 🏆
You are lucky you didnt burn up the transmission. Check and make sure the car is good before test driving. Check the fluids at least bro
What do I do to enter the e63s giveaway bro?